Search

Search Results

• 31. [Article] Geology of the Breitenbush Hot Springs area, Cascade Range, Oregon

  The Breitenbush Hot Springs area lies on the boundary of folded middle to late Tertiary Western Cascade rocks and younger High Cascade rocks. Within the mapped area the Western Cascade rocks are represented ...

  Citation × Citation Citation Abstract Copy Title: Geology of the Breitenbush Hot Springs area, Cascade Range, Oregon Author: Clayton, Clifford Michael Year: 1976 The Breitenbush Hot Springs area lies on the boundary of folded middle to late Tertiary Western Cascade rocks and younger High Cascade rocks. Within the mapped area the Western Cascade rocks are represented by four formations. The Detroit Beds, a sequence of interstratified tuffaceous sandstone, mudflow breccia, and tuff, is overlain unconformably by the Breitenbush Tuff. The Breitenbush Tuff consists of three units of welded pumice-rich crystal-vitric ash-flow tuffs interbedded with tuffaceous sedimentary rocks. The Outerson Formation unconformably overlies the Breitenbush Tuff and consists primarily of basaltic lava and breccia. The Outerson Formation includes three localized members: a basal, glassy, aphanitic basalt, the Lake Leone Sediments, and the Outerson Tuff. The Outerson Formation is cut by a number of feeder dikes and plugs and is unconformably overlain by the Cheat Creek Sediments, composed of volcanic sedimentary rocks and a distinctive basaltic tuff. The Western Cascade formations total more than 1660 m {5500 ft) of strata and range from Oligocene to Pliocene in age. The High Cascade rocks are represented by two formations: the Triangulation Peak Volcanics of basalt and andesite lava and breccia, lying unconformably atop the Cheat Creek Sediments; and unconformably beneath the Collowash Volcanics, a series of thin basaltic lava flows and breccias. The Western and High Cascade rocks are covered extensively by surficial deposits, primarily glacial drift. The High Cascade formations are at least 840 m (2800 ft) thick, ranging in age from Pliocene to Pliestocene. The Western Cascade rocks have been folded and faulted in the Breitenbush Hot Springs area, and form the eastern limb of the north-trending Breitenbush Anticline. The folded rocks and the erosional unconformities between the rock units probably represent two local episodes of orogeny: one in early to middle Miocene and another in late Pliocene to Pleistocene time. The Outerson Formation represents a depositional sequence between the periods of uplift and deformation. Faulting accompanied the orogenic sequences. The primary volcanic landforms in the area have been destroyed by erosion but skeletal remains of High Cascade volcanoes are recognized. Stream erosion and glaciation are responsible for the present landforms. Breitenbush Hot Springs occurs, in part, along basaltic dikes which channel the water through impermeable Breitenbush Tuff. The dikes are believed to be associated with the Outerson basalts. The Hot Springs discharge upwards at 3400 l/min. (900 gpm) of water at temperatures up to 92°C (198°F). Title: Geology of the Breitenbush Hot Springs area, Cascade Range, Oregon Author: Clayton, Clifford Michael Year: 1976 The Breitenbush Hot Springs area lies on the boundary of folded middle to late Tertiary Western Cascade rocks and younger High Cascade rocks. Within the mapped area the Western Cascade rocks are represented by four formations. The Detroit Beds, a sequence of interstratified tuffaceous sandstone, mudflow breccia, and tuff, is overlain unconformably by the Breitenbush Tuff. The Breitenbush Tuff consists of three units of welded pumice-rich crystal-vitric ash-flow tuffs interbedded with tuffaceous sedimentary rocks. The Outerson Formation unconformably overlies the Breitenbush Tuff and consists primarily of basaltic lava and breccia. The Outerson Formation includes three localized members: a basal, glassy, aphanitic basalt, the Lake Leone Sediments, and the Outerson Tuff. The Outerson Formation is cut by a number of feeder dikes and plugs and is unconformably overlain by the Cheat Creek Sediments, composed of volcanic sedimentary rocks and a distinctive basaltic tuff. The Western Cascade formations total more than 1660 m {5500 ft) of strata and range from Oligocene to Pliocene in age. The High Cascade rocks are represented by two formations: the Triangulation Peak Volcanics of basalt and andesite lava and breccia, lying unconformably atop the Cheat Creek Sediments; and unconformably beneath the Collowash Volcanics, a series of thin basaltic lava flows and breccias. The Western and High Cascade rocks are covered extensively by surficial deposits, primarily glacial drift. The High Cascade formations are at least 840 m (2800 ft) thick, ranging in age from Pliocene to Pliestocene. The Western Cascade rocks have been folded and faulted in the Breitenbush Hot Springs area, and form the eastern limb of the north-trending Breitenbush Anticline. The folded rocks and the erosional unconformities between the rock units probably represent two local episodes of orogeny: one in early to middle Miocene and another in late Pliocene to Pleistocene time. The Outerson Formation represents a depositional sequence between the periods of uplift and deformation. Faulting accompanied the orogenic sequences. The primary volcanic landforms in the area have been destroyed by erosion but skeletal remains of High Cascade volcanoes are recognized. Stream erosion and glaciation are responsible for the present landforms. Breitenbush Hot Springs occurs, in part, along basaltic dikes which channel the water through impermeable Breitenbush Tuff. The dikes are believed to be associated with the Outerson basalts. The Hot Springs discharge upwards at 3400 l/min. (900 gpm) of water at temperatures up to 92°C (198°F). Close

• 32. [Article] Quaternary Chronology and Stratigraphy of Mickey Springs, Oregon

  Mickey Springs in the Alvord Desert, southeast Oregon, is analogous to other Basin and Range hydrothermal systems where the requisite conditions of heat source and permeable pathways are met through crustal ...

  Citation × Citation Citation Abstract Copy Title: Quaternary Chronology and Stratigraphy of Mickey Springs, Oregon Author: Mowbray, Leslie Allen Year: 2015 Mickey Springs in the Alvord Desert, southeast Oregon, is analogous to other Basin and Range hydrothermal systems where the requisite conditions of heat source and permeable pathways are met through crustal thinning due to normal faulting. This study examines the morphology and lifespan of near-surface spring features through use of ground penetrating radar, thermoluminescence (TL) dating, and elevation modeling. Duration of hydrothermal activity at Mickey Springs has not previously been determined, and age determinations of sinter at the site are conflicting. The reason for and timing of this change in silica saturation in the hydrothermal fluid has not been resolved. Three morphologies of silica sinter deposition have been identified at Mickey Springs. These are (1) well-sorted, fine-grained sandstone with ripple marks, cross beds and preserved root casts, to poorly-sorted conglomerate of primarily basalt clasts, both cemented by coeval silica deposition, (2) large depressions (12-32 m diameter) rimmed with sinter, characterized by fine silt and clay blanketing a sinter apron and infilling the central depression, and (3) quaquaversal sinter mounds identified by outcropping pool-edge sinter typically surrounding a shallow depression of loose sediment. Silica-cemented sandstone and conglomerate were the first features formed by coeval hydrothermal processes at the site, and were emplaced prior to 30 kya as suggested by structural and stratigraphic relationships. Structure between two interacting fault tips may have constrained the extent of silica cementation. By 30 kya, a left-stepping fault oriented roughly north/south further constrained the near-surface permeable zone. TL dates from sediment stratigraphically below and above sinter aprons around mounds and depressions (former spring vents) indicate sinter deposition between 30 and 20 kya. Location of these features was dictated by development of the left-stepping fault. As pluvial Lake Alvord filled at the end of the Pleistocene, lake sediment filled most vents, which were largely inactive, with fine-grained silt and clay. Today, hydrothermal activity persists in two modes: (1) The current high-temperature springs, steam vents and mudpots concentrated in a 50 x 50 m area south of the sinter mounds and depressions, and (2) scattered springs and steam vents that exploit previous permeable pathways that once provided the hydrothermal fluid which precipitated the sinter aprons. Currently there is no active silica sinter deposition at Mickey Springs. Structures and stratigraphic relationships identified through this study favor a transport-limited and structurally controlled model of fluid transport. Sinter deposition is determined to have occurred before the most recent highstand of pluvial Lake Alvord. A climate driven model, where groundwater recharge from pluvial Lake Alvord circulates to a deep heat source and enhances spring discharge, is not supported by these findings, as no evidence was found for sinter precipitation after the drying of the lake. Future studies of other hydrothermal systems in the Basin and Range may reveal that permeable pathways along local structures are the primary drivers in this region. Title: Quaternary Chronology and Stratigraphy of Mickey Springs, Oregon Author: Mowbray, Leslie Allen Year: 2015 Mickey Springs in the Alvord Desert, southeast Oregon, is analogous to other Basin and Range hydrothermal systems where the requisite conditions of heat source and permeable pathways are met through crustal thinning due to normal faulting. This study examines the morphology and lifespan of near-surface spring features through use of ground penetrating radar, thermoluminescence (TL) dating, and elevation modeling. Duration of hydrothermal activity at Mickey Springs has not previously been determined, and age determinations of sinter at the site are conflicting. The reason for and timing of this change in silica saturation in the hydrothermal fluid has not been resolved. Three morphologies of silica sinter deposition have been identified at Mickey Springs. These are (1) well-sorted, fine-grained sandstone with ripple marks, cross beds and preserved root casts, to poorly-sorted conglomerate of primarily basalt clasts, both cemented by coeval silica deposition, (2) large depressions (12-32 m diameter) rimmed with sinter, characterized by fine silt and clay blanketing a sinter apron and infilling the central depression, and (3) quaquaversal sinter mounds identified by outcropping pool-edge sinter typically surrounding a shallow depression of loose sediment. Silica-cemented sandstone and conglomerate were the first features formed by coeval hydrothermal processes at the site, and were emplaced prior to 30 kya as suggested by structural and stratigraphic relationships. Structure between two interacting fault tips may have constrained the extent of silica cementation. By 30 kya, a left-stepping fault oriented roughly north/south further constrained the near-surface permeable zone. TL dates from sediment stratigraphically below and above sinter aprons around mounds and depressions (former spring vents) indicate sinter deposition between 30 and 20 kya. Location of these features was dictated by development of the left-stepping fault. As pluvial Lake Alvord filled at the end of the Pleistocene, lake sediment filled most vents, which were largely inactive, with fine-grained silt and clay. Today, hydrothermal activity persists in two modes: (1) The current high-temperature springs, steam vents and mudpots concentrated in a 50 x 50 m area south of the sinter mounds and depressions, and (2) scattered springs and steam vents that exploit previous permeable pathways that once provided the hydrothermal fluid which precipitated the sinter aprons. Currently there is no active silica sinter deposition at Mickey Springs. Structures and stratigraphic relationships identified through this study favor a transport-limited and structurally controlled model of fluid transport. Sinter deposition is determined to have occurred before the most recent highstand of pluvial Lake Alvord. A climate driven model, where groundwater recharge from pluvial Lake Alvord circulates to a deep heat source and enhances spring discharge, is not supported by these findings, as no evidence was found for sinter precipitation after the drying of the lake. Future studies of other hydrothermal systems in the Basin and Range may reveal that permeable pathways along local structures are the primary drivers in this region. Close

• 33. [Article] Late Pleistocene and recent archaeology and geomorphology of the south shore of Harney Lake, Oregon

  The present study was a response to the discovery of two artifacts found in a ditch wall near Harney Lake, Oregon. These were lying on a buried lake floor that appeared to be of late Pleistocene or early ...

  Citation × Citation Citation Abstract Copy Title: Late Pleistocene and recent archaeology and geomorphology of the south shore of Harney Lake, Oregon Author: Gehr, Keith Donald Year: 1980 The present study was a response to the discovery of two artifacts found in a ditch wall near Harney Lake, Oregon. These were lying on a buried lake floor that appeared to be of late Pleistocene or early Recent age. Other sediments exposed in the ditch seemed to relate to at least some of the phases of the pluvial lake sequence in the Harney Basin. Three problems were considered: (1) the geomorphology and dating of the pluvial lake stillstands, (2) whether the original artifacts were part of a larger early site, and (3) whether there was any relationship between archaeological sites and geomorphic features in the area. These problems were approached in the field by stratigraphic mapping of exposed sediments and by an archaeological survey of a defined study area. Test excavations were made adjacent to the location of the original artifact discovery to search for other cultural material. Beachline records of four stillstands of Pluvial Lake Malheur are preserved in the exposed sediments. The youngest beachline is undated. Three others were 14C dated from associated fossil molluscs at 32,000, 9620 and 8680 B.P. At least in the case of the 8680 B.P. lake, the Harney Basin was filled to overflowing and was a part of the Columbia River system. The Voltage basalt flow, which dammed the outlet of the Basin in Malheur Gap, was in place by 32,000 years ago. There is no evidence for a diversion of the Basin outlet to Crane Gap following this event. Molluscan fossils and diatoms were used, along with soil texture analyses, to help identify and differentiate sedimentary deposits and to draw environmental inferences. Artifacts were found both on and beneath buried beach deposits of the 8680 B.P. lake. Four of the five sites in the study area were either on wave-cut terraces or other lakeshore features associated with this lake. Diagnostic artifacts are Lind Coulee points, crescents, basally ground leaf-shaped points, and what are apparently true blades. The sites seem to have been located to take advantage of shallow water littoral zone resources. Fish may have been an important dietary item of the early Harney Basin dwellers. Large salmonid vertebrae from fish in the 10 kg weight class are found on the playa. By using the relationship between landforms and elevations it may be possible to predict the general age class of other sites on the margin of the playas. Title: Late Pleistocene and recent archaeology and geomorphology of the south shore of Harney Lake, Oregon Author: Gehr, Keith Donald Year: 1980 The present study was a response to the discovery of two artifacts found in a ditch wall near Harney Lake, Oregon. These were lying on a buried lake floor that appeared to be of late Pleistocene or early Recent age. Other sediments exposed in the ditch seemed to relate to at least some of the phases of the pluvial lake sequence in the Harney Basin. Three problems were considered: (1) the geomorphology and dating of the pluvial lake stillstands, (2) whether the original artifacts were part of a larger early site, and (3) whether there was any relationship between archaeological sites and geomorphic features in the area. These problems were approached in the field by stratigraphic mapping of exposed sediments and by an archaeological survey of a defined study area. Test excavations were made adjacent to the location of the original artifact discovery to search for other cultural material. Beachline records of four stillstands of Pluvial Lake Malheur are preserved in the exposed sediments. The youngest beachline is undated. Three others were 14C dated from associated fossil molluscs at 32,000, 9620 and 8680 B.P. At least in the case of the 8680 B.P. lake, the Harney Basin was filled to overflowing and was a part of the Columbia River system. The Voltage basalt flow, which dammed the outlet of the Basin in Malheur Gap, was in place by 32,000 years ago. There is no evidence for a diversion of the Basin outlet to Crane Gap following this event. Molluscan fossils and diatoms were used, along with soil texture analyses, to help identify and differentiate sedimentary deposits and to draw environmental inferences. Artifacts were found both on and beneath buried beach deposits of the 8680 B.P. lake. Four of the five sites in the study area were either on wave-cut terraces or other lakeshore features associated with this lake. Diagnostic artifacts are Lind Coulee points, crescents, basally ground leaf-shaped points, and what are apparently true blades. The sites seem to have been located to take advantage of shallow water littoral zone resources. Fish may have been an important dietary item of the early Harney Basin dwellers. Large salmonid vertebrae from fish in the 10 kg weight class are found on the playa. By using the relationship between landforms and elevations it may be possible to predict the general age class of other sites on the margin of the playas. Close

• 34. [Article] Origins of Late- Pleistocene Coastal Dune Sheets, Magdalena and Guerrero Negro, from Continental Shelf Low-stand Supply (70-20 ka), under Conditions of Southeast Littoral- and Eolian-Sand Transport, in Baja California Sur, Mexico

  Shallow morpho-stratigraphic sections (n = 11) in each of two large coastal dune sheets including the Magdalena (7000 km2) and Guerrero Negro (8000 km2) dune sheets, from the Pacific Ocean side of Baja ...

  Citation × Citation Citation Abstract Copy Title: Origins of Late- Pleistocene Coastal Dune Sheets, Magdalena and Guerrero Negro, from Continental Shelf Low-stand Supply (70-20 ka), under Conditions of Southeast Littoral- and Eolian-Sand Transport, in Baja California Sur, Mexico Author: Peterson, Curt D., Murillo-Jiminez, Janette, Stock, Errol, Price, David M., Hostetler, Steve W., Percy, David Year: 2017 Shallow morpho-stratigraphic sections (n = 11) in each of two large coastal dune sheets including the Magdalena (7000 km2) and Guerrero Negro (8000 km2) dune sheets, from the Pacific Ocean side of Baja California Sur, Mexico, have been analyzed for dune deposit age. The shallow morpho-stratigraphic sections (∼2-10 m depth) include 11 new TL and 14C ages, and paleosol chronosequences, that differentiate cemented late Pleistocene dune deposits (20.7 ± 2.1 to 99.8 ± 9.4 ka) from uncemented Holocene dune deposits (0.7 ± 0.05 to at least 3.2 ± 0.3 ka). Large linear dune ridges (5-10 m in height) in the dune sheet interiors trend southeast and are generally of late Pleistocene age (∼70-20 ka). The late Pleistocene dune deposits reflect eolian transport of marine sand across the emerged continental shelf (30-50 km southeast distance) from low-stand paleo-shorelines (-100 ± 25 m elevation), which were locally oriented nearly orthogonal to modeled deep-water wave directions (∼300° TN). During the Holocene marine transgression, onshore and alongshore wave transport delivered remobilized shelf-sand deposits to the nearshore areas of the large dune sheets, building extensive barrier islands and sand spits. Submerged back-barrier lagoons generally precluded marine sand supply to dune sheet interiors in middle to late Holocene time, though exceptions occur along some ocean and lagoon shorelines. Reactivation of the late Pleistocene dune deposits in the dune sheet interiors lead to generally thin (1-3 m thickness), but widespread, covers of Holocene dune deposits (0.41 ± 0.05 to 10.5 ± 1.6 ka). Mechanical drilling will be required to penetrate indurated subsoil caliche layers to reach basal Pleistocene dune deposits. Title: Origins of Late- Pleistocene Coastal Dune Sheets, Magdalena and Guerrero Negro, from Continental Shelf Low-stand Supply (70-20 ka), under Conditions of Southeast Littoral- and Eolian-Sand Transport, in Baja California Sur, Mexico Author: Peterson, Curt D., Murillo-Jiminez, Janette, Stock, Errol, Price, David M., Hostetler, Steve W., Percy, David Year: 2017 Shallow morpho-stratigraphic sections (n = 11) in each of two large coastal dune sheets including the Magdalena (7000 km2) and Guerrero Negro (8000 km2) dune sheets, from the Pacific Ocean side of Baja California Sur, Mexico, have been analyzed for dune deposit age. The shallow morpho-stratigraphic sections (∼2-10 m depth) include 11 new TL and 14C ages, and paleosol chronosequences, that differentiate cemented late Pleistocene dune deposits (20.7 ± 2.1 to 99.8 ± 9.4 ka) from uncemented Holocene dune deposits (0.7 ± 0.05 to at least 3.2 ± 0.3 ka). Large linear dune ridges (5-10 m in height) in the dune sheet interiors trend southeast and are generally of late Pleistocene age (∼70-20 ka). The late Pleistocene dune deposits reflect eolian transport of marine sand across the emerged continental shelf (30-50 km southeast distance) from low-stand paleo-shorelines (-100 ± 25 m elevation), which were locally oriented nearly orthogonal to modeled deep-water wave directions (∼300° TN). During the Holocene marine transgression, onshore and alongshore wave transport delivered remobilized shelf-sand deposits to the nearshore areas of the large dune sheets, building extensive barrier islands and sand spits. Submerged back-barrier lagoons generally precluded marine sand supply to dune sheet interiors in middle to late Holocene time, though exceptions occur along some ocean and lagoon shorelines. Reactivation of the late Pleistocene dune deposits in the dune sheet interiors lead to generally thin (1-3 m thickness), but widespread, covers of Holocene dune deposits (0.41 ± 0.05 to 10.5 ± 1.6 ka). Mechanical drilling will be required to penetrate indurated subsoil caliche layers to reach basal Pleistocene dune deposits. Close

• 35. [Article] Coastal Eolian Sand-Ramp Development Related to Paleo-Sea-Level Changes during the Latest Pleistocene and Holocene (21–0 ka) in San Miguel Island, California, U.S.A.

  Coastal eolian sand ramps (5–130 m elevation) on the northern slope (windward) side of the small San Miguel Island (13 km in W-E length) range in age from late Pleistocene to modern time, though a major ...

  Citation × Citation Citation Abstract Copy Title: Coastal Eolian Sand-Ramp Development Related to Paleo-Sea-Level Changes during the Latest Pleistocene and Holocene (21–0 ka) in San Miguel Island, California, U.S.A. Author: Peterson, Curt D., Erlandson, Jon M., Stock, Errol, Hostetler, Steve W., Price, David M. Year: 2017 Coastal eolian sand ramps (5–130 m elevation) on the northern slope (windward) side of the small San Miguel Island (13 km in W-E length) range in age from late Pleistocene to modern time, though a major hiatus in sand-ramp growth occurred during the early Holocene marine transgression (16–9 ka). The Holocene sand ramps (1–5 m measured thicknesses) currently lack large dune forms, thereby representing deflated erosional remnants, locally covering thicker late Pleistocene sand-ramp deposits. The ramp sand was initially supplied from the adjacent island-shelf platform, extending about 20 km north of the present coastline. The sand-ramp deposits and interbedded loess soils were 14C dated using 112 samples from 32 archaeological sites and other geologic sections. Latest Pleistocene sand ramps (66–18 ka) were derived from across-shelf eolian sand transport during marine low stands. Shoreward wave transport supplied remobilized late Pleistocene sand from the inner shelf to Holocene beaches, where dominant NW winds supplied sand to the sand ramps. The onset dates of the sand-ramp deposition in San Miguel are 7.2 ± 1.5 ka (sample n = 14). The internal strata dates in the vertically accreting sand ramps are 3.4 ± 1.7 ka (n = 34). The sand ramps in San Miguel show wide-scale termination of sand supply in the latest Holocene time. The sand-ramp top dates or burial dates are 1.7 ± 0.9 ka (n = 28). The latest Holocene sand ramps are truncated along most of the island's northern coastline, indicating recent losses of nearshore sand reserves to onshore, alongshore, and, possibly, offshore sand sinks. The truncated sand ramps in San Miguel Island and in other sand-depleted marine coastlines provide warnings about future beach erosion and/or shoreline retreat from accelerated sea-level rise accompanying predicted global warming. Title: Coastal Eolian Sand-Ramp Development Related to Paleo-Sea-Level Changes during the Latest Pleistocene and Holocene (21–0 ka) in San Miguel Island, California, U.S.A. Author: Peterson, Curt D., Erlandson, Jon M., Stock, Errol, Hostetler, Steve W., Price, David M. Year: 2017 Coastal eolian sand ramps (5–130 m elevation) on the northern slope (windward) side of the small San Miguel Island (13 km in W-E length) range in age from late Pleistocene to modern time, though a major hiatus in sand-ramp growth occurred during the early Holocene marine transgression (16–9 ka). The Holocene sand ramps (1–5 m measured thicknesses) currently lack large dune forms, thereby representing deflated erosional remnants, locally covering thicker late Pleistocene sand-ramp deposits. The ramp sand was initially supplied from the adjacent island-shelf platform, extending about 20 km north of the present coastline. The sand-ramp deposits and interbedded loess soils were 14C dated using 112 samples from 32 archaeological sites and other geologic sections. Latest Pleistocene sand ramps (66–18 ka) were derived from across-shelf eolian sand transport during marine low stands. Shoreward wave transport supplied remobilized late Pleistocene sand from the inner shelf to Holocene beaches, where dominant NW winds supplied sand to the sand ramps. The onset dates of the sand-ramp deposition in San Miguel are 7.2 ± 1.5 ka (sample n = 14). The internal strata dates in the vertically accreting sand ramps are 3.4 ± 1.7 ka (n = 34). The sand ramps in San Miguel show wide-scale termination of sand supply in the latest Holocene time. The sand-ramp top dates or burial dates are 1.7 ± 0.9 ka (n = 28). The latest Holocene sand ramps are truncated along most of the island's northern coastline, indicating recent losses of nearshore sand reserves to onshore, alongshore, and, possibly, offshore sand sinks. The truncated sand ramps in San Miguel Island and in other sand-depleted marine coastlines provide warnings about future beach erosion and/or shoreline retreat from accelerated sea-level rise accompanying predicted global warming. Close

• 36. [Article] A multivariate test of evolutionary stasis in Homo sapiens

  In the past, efforts to prove or disprove stasis in hominids have relied upon univariate tests such as Students's t-test. Severe methodological and interpretive problems arise from the misapplication of ...

  Citation × Citation Citation Abstract Copy Title: A multivariate test of evolutionary stasis in Homo sapiens Author: Kleckner, Jon Geoffrey Year: 1989 In the past, efforts to prove or disprove stasis in hominids have relied upon univariate tests such as Students's t-test. Severe methodological and interpretive problems arise from the misapplication of univariate statistics to questions concerning variation in shape through time. These are questions best addressed using the multivariate approach of morphometrics. Eighteen cranial dimensions drawn from 33 mid and late Pleistocene Homo sapiens were examined using principal component analysis (PCA). PCA divided the sample into two distinct morphologies. Archaic Homo sapiens of the mid Pleistocene clustered with Wurm I neanderthals and apart from post Gottweig early anatomically modern Homo sapiens. ANOVA and Cluster analysis confirm the groups represent two different morphologies rather than a single spectrum of morphological change. These results support stasis rather than phyletic gradualism during this period of hominid evolution. Title: A multivariate test of evolutionary stasis in Homo sapiens Author: Kleckner, Jon Geoffrey Year: 1989 In the past, efforts to prove or disprove stasis in hominids have relied upon univariate tests such as Students's t-test. Severe methodological and interpretive problems arise from the misapplication of univariate statistics to questions concerning variation in shape through time. These are questions best addressed using the multivariate approach of morphometrics. Eighteen cranial dimensions drawn from 33 mid and late Pleistocene Homo sapiens were examined using principal component analysis (PCA). PCA divided the sample into two distinct morphologies. Archaic Homo sapiens of the mid Pleistocene clustered with Wurm I neanderthals and apart from post Gottweig early anatomically modern Homo sapiens. ANOVA and Cluster analysis confirm the groups represent two different morphologies rather than a single spectrum of morphological change. These results support stasis rather than phyletic gradualism during this period of hominid evolution. Close

• 37. [Article] The Bear Creek Site (45KI839), a Late Pleistocene–Holocene Transition Occupation in the Puget Sound Lowland, King County, Washington

  The Bear Creek site in Redmond, Washington, yields important information about settlement, subsistence, and technology in the Puget Lowland during the late Pleistocene–Holocene transition. The lithic assemblage ...

  Citation × Citation Citation Abstract Copy Title: The Bear Creek Site (45KI839), a Late Pleistocene–Holocene Transition Occupation in the Puget Sound Lowland, King County, Washington Author: Kopperl, Robert E., Taylor, Amanda K., Miss, Christian J., Ames, Kenneth M., Hodges, Charles M. Year: 2015 The Bear Creek site in Redmond, Washington, yields important information about settlement, subsistence, and technology in the Puget Lowland during the late Pleistocene–Holocene transition. The lithic assemblage is dominated by expedient flake technology, but also contains bifaces and retouched tools. Ongoing analyses focus on site formation, procurement strategies of lithic raw materials, production of flake tools, and technological comparisons of Bear Creek stemmed and concave-base points with other Paleoarchaic technologies of western North America Title: The Bear Creek Site (45KI839), a Late Pleistocene–Holocene Transition Occupation in the Puget Sound Lowland, King County, Washington Author: Kopperl, Robert E., Taylor, Amanda K., Miss, Christian J., Ames, Kenneth M., Hodges, Charles M. Year: 2015 The Bear Creek site in Redmond, Washington, yields important information about settlement, subsistence, and technology in the Puget Lowland during the late Pleistocene–Holocene transition. The lithic assemblage is dominated by expedient flake technology, but also contains bifaces and retouched tools. Ongoing analyses focus on site formation, procurement strategies of lithic raw materials, production of flake tools, and technological comparisons of Bear Creek stemmed and concave-base points with other Paleoarchaic technologies of western North America Close

• 38. [Article] Mapping of Unstable and Potentially Unstable Slopes in Sogne og Fjordane

  For the past three years NGU has worked on 25 unstable and potentially unstable rock slopes in Sogn og Fjordane. In addition Fjærlandsfjord, Hyenfjord and Årdalsvatnet were systematically mapped for deposits ...

  Citation × Citation Citation Abstract Copy Title: Mapping of Unstable and Potentially Unstable Slopes in Sogne og Fjordane Author: Hermanns, Reginald L., Fischer, Luzia, Oppikofer, Thierry, Bøhme, M., Dehls, John F., Henriksen, H., Booth, Adam M., Eilertsen, R., Longva, O., Eiken, Trond Year: 2011 For the past three years NGU has worked on 25 unstable and potentially unstable rock slopes in Sogn og Fjordane. In addition Fjærlandsfjord, Hyenfjord and Årdalsvatnet were systematically mapped for deposits of prehistoric and historic rock slope failures onshore and with help of a bathymetry. Mapping on land included structural mapping of ten sites by on-site field mapping and nine sites by remote structural mapping using terrestrial laser scanning technology (TLS). Field work also included periodic monitoring of 14 sites using differential Global Positioning Systems (dGPS) and TLS at 4 sites. Synthetic Aperture Radar was app lied for the entire county but slide velocities could only be mapped out at one locality at Osmundneset (Gloppen municipality). A large amount of work was carried out on the slope east of Flåm in the Aurland valley, and results have been reported separately (NGU 20 11 .025). Three large instabilities have been discovered or taken into the monitoring program. These are Osmundneset in Gloppen municipality, Skrednipa in Sogndal municipality, and the Ovris valley in Vik municipality. The largest movements with 1.5 cm horizontal and 1.5 cm vertical displacement were measured on the instability with a volume of approx. 1 Mm3 in Ovris valley. Opening of cracks has been measured at that site also in the 1960’s, 1970’s and 1980’s. Our data suggest a slight acceleration of this instability. Acceleration was also documented for a 100.000 m3 large instability called Lifjellet, although velocity of that site is less than half of the velocity of the block in Ovris valley. However at that site a collapse of a rockslope with a volume of 25.000 to 30.000 m3 occurred only 19 years ago. Installation of continuous monitoring and early-warning systems should be considered at both of those sites as well as at similar sites where relatively small instabilities that might fail without a long acceleration phase are positioned above settlements (Gråberget in Høyanger municipality). Similarly all other monitored instabilities in Sogn og Fjordane are in the order of mm/yr and not considered to be critical on a short term. However, periodic monitoring has to be continued. Cosmogenic nuclide dating (CN) has been applied to determine ages of rockslide deposits in Fjærlandfjord (Sogne municipality) and at the slope E of Flåm (Aurland community), resulting in Late Pleistocene and Holocene ages. CN dating has also applied to the sliding planes at Skjeringahaugane (Luste municipality). The results indicate that the movement initiated at the beginning of the Holocene and is progressive. Long term slip rates are in the same order of slip rates measured by dGPS. Title: Mapping of Unstable and Potentially Unstable Slopes in Sogne og Fjordane Author: Hermanns, Reginald L., Fischer, Luzia, Oppikofer, Thierry, Bøhme, M., Dehls, John F., Henriksen, H., Booth, Adam M., Eilertsen, R., Longva, O., Eiken, Trond Year: 2011 For the past three years NGU has worked on 25 unstable and potentially unstable rock slopes in Sogn og Fjordane. In addition Fjærlandsfjord, Hyenfjord and Årdalsvatnet were systematically mapped for deposits of prehistoric and historic rock slope failures onshore and with help of a bathymetry. Mapping on land included structural mapping of ten sites by on-site field mapping and nine sites by remote structural mapping using terrestrial laser scanning technology (TLS). Field work also included periodic monitoring of 14 sites using differential Global Positioning Systems (dGPS) and TLS at 4 sites. Synthetic Aperture Radar was app lied for the entire county but slide velocities could only be mapped out at one locality at Osmundneset (Gloppen municipality). A large amount of work was carried out on the slope east of Flåm in the Aurland valley, and results have been reported separately (NGU 20 11 .025). Three large instabilities have been discovered or taken into the monitoring program. These are Osmundneset in Gloppen municipality, Skrednipa in Sogndal municipality, and the Ovris valley in Vik municipality. The largest movements with 1.5 cm horizontal and 1.5 cm vertical displacement were measured on the instability with a volume of approx. 1 Mm3 in Ovris valley. Opening of cracks has been measured at that site also in the 1960’s, 1970’s and 1980’s. Our data suggest a slight acceleration of this instability. Acceleration was also documented for a 100.000 m3 large instability called Lifjellet, although velocity of that site is less than half of the velocity of the block in Ovris valley. However at that site a collapse of a rockslope with a volume of 25.000 to 30.000 m3 occurred only 19 years ago. Installation of continuous monitoring and early-warning systems should be considered at both of those sites as well as at similar sites where relatively small instabilities that might fail without a long acceleration phase are positioned above settlements (Gråberget in Høyanger municipality). Similarly all other monitored instabilities in Sogn og Fjordane are in the order of mm/yr and not considered to be critical on a short term. However, periodic monitoring has to be continued. Cosmogenic nuclide dating (CN) has been applied to determine ages of rockslide deposits in Fjærlandfjord (Sogne municipality) and at the slope E of Flåm (Aurland community), resulting in Late Pleistocene and Holocene ages. CN dating has also applied to the sliding planes at Skjeringahaugane (Luste municipality). The results indicate that the movement initiated at the beginning of the Holocene and is progressive. Long term slip rates are in the same order of slip rates measured by dGPS. Close

• 39. [Article] Late Pleistocene and Holocene Aged Glacial and Climatic Reconstructions in the Goat Rocks Wilderness, Washington, United States

  Eight glaciers, covering an area of 1.63 km2, reside on the northern and northeastern slopes of the Goat Rocks tallest peaks in the Cascades of central Washington. At least three glacial stands occurred ...

  Citation × Citation Citation Abstract Copy Title: Late Pleistocene and Holocene Aged Glacial and Climatic Reconstructions in the Goat Rocks Wilderness, Washington, United States Author: Heard, Joshua Andrews Year: 2012 Eight glaciers, covering an area of 1.63 km2, reside on the northern and northeastern slopes of the Goat Rocks tallest peaks in the Cascades of central Washington. At least three glacial stands occurred downstream from these glaciers. Closest to modern glacier termini are Little Ice Age (LIA) moraines that were deposited between 1870 and 1899 AD, according to the lichenometric analysis. They are characterized by sharp, minimally eroded crests, little to no soil cover, and minimal vegetation cover. Glacier reconstructions indicate that LIA glaciers covered 8.29 km2, 76% more area than modern ice coverage. The average LIA equilibrium line altitude (ELA) of 1995 ± 70 m is ~150 m below the average modern ELA of 2149 ± 76 m. To satisfy climate conditions at the LIA ELA, the winter snow accumulation must have been 8 to 43 cm greater and mean summer temperatures 0.2 to 1.3 ºC cooler than they are now. Late Pleistocene to early Holocene (LPEH) aged moraines are located between 100 and 400 m below the LIA deposits. They have degraded moraine crests, few surface boulders, and considerable vegetation and soil cover. Volcanic ashes indicate LPEH moraines were deposited before 1480 AD while morphometric data suggest deposition during the late Pleistocene or early Holocene. The average LPEH ELA of 1904 ± 110 m is ~ 240 m and ~90 m below the modern and LIA ELAs, respectively. The climate change necessary to maintain a glacier with an ELA at that elevation for LPEH conditions requires the winter accumulation to increase by 47 to 48 cm weq and the mean summer temperature to cool by 1.4 to 1.5 ºC. Last glacial maximum (LGM) moraines are located more than 30 km downstream from modern glacial termini. They are characterized by hummocky topography, rounded moraine crests, complete vegetation cover, and well developed soil cover. Moraine morphometry, soil characteristics, and distance from modern glacial termini indicate that deposition occurred at least 15 ka BP during an expansive cooling event, the last being the LGM. The LGM ELA of 1230 m is ~920 m below the modern ELA. The climate change necessary to maintain a glacier with an ELA at that elevation for LGM conditions requires the mean summer temperature to cool by 5.6 ºC with no change in precipitation. Title: Late Pleistocene and Holocene Aged Glacial and Climatic Reconstructions in the Goat Rocks Wilderness, Washington, United States Author: Heard, Joshua Andrews Year: 2012 Eight glaciers, covering an area of 1.63 km2, reside on the northern and northeastern slopes of the Goat Rocks tallest peaks in the Cascades of central Washington. At least three glacial stands occurred downstream from these glaciers. Closest to modern glacier termini are Little Ice Age (LIA) moraines that were deposited between 1870 and 1899 AD, according to the lichenometric analysis. They are characterized by sharp, minimally eroded crests, little to no soil cover, and minimal vegetation cover. Glacier reconstructions indicate that LIA glaciers covered 8.29 km2, 76% more area than modern ice coverage. The average LIA equilibrium line altitude (ELA) of 1995 ± 70 m is ~150 m below the average modern ELA of 2149 ± 76 m. To satisfy climate conditions at the LIA ELA, the winter snow accumulation must have been 8 to 43 cm greater and mean summer temperatures 0.2 to 1.3 ºC cooler than they are now. Late Pleistocene to early Holocene (LPEH) aged moraines are located between 100 and 400 m below the LIA deposits. They have degraded moraine crests, few surface boulders, and considerable vegetation and soil cover. Volcanic ashes indicate LPEH moraines were deposited before 1480 AD while morphometric data suggest deposition during the late Pleistocene or early Holocene. The average LPEH ELA of 1904 ± 110 m is ~ 240 m and ~90 m below the modern and LIA ELAs, respectively. The climate change necessary to maintain a glacier with an ELA at that elevation for LPEH conditions requires the winter accumulation to increase by 47 to 48 cm weq and the mean summer temperature to cool by 1.4 to 1.5 ºC. Last glacial maximum (LGM) moraines are located more than 30 km downstream from modern glacial termini. They are characterized by hummocky topography, rounded moraine crests, complete vegetation cover, and well developed soil cover. Moraine morphometry, soil characteristics, and distance from modern glacial termini indicate that deposition occurred at least 15 ka BP during an expansive cooling event, the last being the LGM. The LGM ELA of 1230 m is ~920 m below the modern ELA. The climate change necessary to maintain a glacier with an ELA at that elevation for LGM conditions requires the mean summer temperature to cool by 5.6 ºC with no change in precipitation. Close

• 40. [Article] Biochemical Description of a Lava Tube Lake in Southeast Oregon

  A Pleistocene lava tube cave in southeast Oregon has a seasonally fluctuating lake occupying the last 1200 to 2000 feet. Three endemic invertebrate species inhabit the lake: Kenkia rynchida Hyman; Asellus ...

  Citation × Citation Citation Abstract Copy Title: Biochemical Description of a Lava Tube Lake in Southeast Oregon Author: Palmer, John Edward Year: 1975 A Pleistocene lava tube cave in southeast Oregon has a seasonally fluctuating lake occupying the last 1200 to 2000 feet. Three endemic invertebrate species inhabit the lake: Kenkia rynchida Hyman; Asellus sp.; and stygobromus hubbsi. Shoemaker. Little is known however, about their environment. The purpose of this study was to describe various physical and chemical parameters of Malheur Cave Lake. Title: Biochemical Description of a Lava Tube Lake in Southeast Oregon Author: Palmer, John Edward Year: 1975 A Pleistocene lava tube cave in southeast Oregon has a seasonally fluctuating lake occupying the last 1200 to 2000 feet. Three endemic invertebrate species inhabit the lake: Kenkia rynchida Hyman; Asellus sp.; and stygobromus hubbsi. Shoemaker. Little is known however, about their environment. The purpose of this study was to describe various physical and chemical parameters of Malheur Cave Lake. Close