Search

Search Results

• 61. [Image] The Cody Hydrothermal System

  	The hot springs of Colter's Hell are the surface manifestations of a much larger hydrothermal system. That system has been studied to define its extent, maximum temperature, and mechanism of operation. ...
  	Citation × Citation Citation Abstract Copy Title: The Cody Hydrothermal System Author: Heasler, H.P. Year: 1982 The hot springs of Colter's Hell are the surface manifestations of a much larger hydrothermal system. That system has been studied to define its extent, maximum temperature, and mechanism of operation. The study area covers 2700 km/sup 2/ (1040 mi/sup 2/) in northwest Wyoming. Research and field work included locating and sampling the hot springs, geologic mapping, thermal logging of available wells, measuring thermal conductivities, analyzing over 200 oil and gas well bottom-hole temperatures, and compiling and analyzing hydrologic data. These data were used to generate a model for the hydrothermal system Title: The Cody Hydrothermal System Author: Heasler, H.P. Year: 1982 The hot springs of Colter's Hell are the surface manifestations of a much larger hydrothermal system. That system has been studied to define its extent, maximum temperature, and mechanism of operation. The study area covers 2700 km/sup 2/ (1040 mi/sup 2/) in northwest Wyoming. Research and field work included locating and sampling the hot springs, geologic mapping, thermal logging of available wells, measuring thermal conductivities, analyzing over 200 oil and gas well bottom-hole temperatures, and compiling and analyzing hydrologic data. These data were used to generate a model for the hydrothermal system Close

• 62. [Image] Interactive Fracture Design Model

  	A computer program is described that can be used to design a fracture stimulation treatment for a geothermal reservoir. The program uses state-of-the-art methods to calculate the temperature of the fracture ...
  	Citation × Citation Citation Abstract Copy Title: Interactive Fracture Design Model Author: Petroleum Training and Technical Services Year: 1980 A computer program is described that can be used to design a fracture stimulation treatment for a geothermal reservoir. The program uses state-of-the-art methods to calculate the temperature of the fracture fluid as a function of time and distance in the fracture. This information is used to determine the temperature dependent properties of the fracture fluid. These fluid properties are utilized to calculate the fracture geometry as a function of time. The fracture geometry and temperature distribution of the fracture fluid are coupled so the subroutines that calculate these distributions have been made interactive Title: Interactive Fracture Design Model Author: Petroleum Training and Technical Services Year: 1980 A computer program is described that can be used to design a fracture stimulation treatment for a geothermal reservoir. The program uses state-of-the-art methods to calculate the temperature of the fracture fluid as a function of time and distance in the fracture. This information is used to determine the temperature dependent properties of the fracture fluid. These fluid properties are utilized to calculate the fracture geometry as a function of time. The fracture geometry and temperature distribution of the fracture fluid are coupled so the subroutines that calculate these distributions have been made interactive Close

• 63. [Image] High Temperature Electronics and Instrumentation Seminar: December 3-4, 1979

  	The purpose of this two day seminar is to review the state-of-the-art and the recent substantial progress in High Temperature Electronics and Instrumentation. This seminar comes at a critical time and ...
  	Citation × Citation Citation Abstract Copy Title: High Temperature Electronics and Instrumentation Seminar: December 3-4, 1979 Author: U.S. Department of Energy (USDOE) Year: 1979 The purpose of this two day seminar is to review the state-of-the-art and the recent substantial progress in High Temperature Electronics and Instrumentation. This seminar comes at a critical time and it addresses a vital subject. The frontiers of technology are rapidly moving beyond the conventional 125°C boundary. Already, special “hostile environment" instruments routinely operate up to 180 C1 , a few prototype systems have been field tested to 275°C, new development is underway for 300°C integrated circuits 3, and research continues on components up to 500°C Title: High Temperature Electronics and Instrumentation Seminar: December 3-4, 1979 Author: U.S. Department of Energy (USDOE) Year: 1979 The purpose of this two day seminar is to review the state-of-the-art and the recent substantial progress in High Temperature Electronics and Instrumentation. This seminar comes at a critical time and it addresses a vital subject. The frontiers of technology are rapidly moving beyond the conventional 125°C boundary. Already, special “hostile environment" instruments routinely operate up to 180 C1 , a few prototype systems have been field tested to 275°C, new development is underway for 300°C integrated circuits 3, and research continues on components up to 500°C Close

• 64. [Image] Chloride/Magnesium Ratio of Shallow Groundwaters as a Regional Geothermal Indicator in Hawaii

  	This report discusses some of the problems in using the Si02-temperature criteria for shallow groundwater assessment and the applications of the Cl/Mg ratio. Also presented are those areas within the state ...
  	Citation × Citation Citation Abstract Copy Title: Chloride/Magnesium Ratio of Shallow Groundwaters as a Regional Geothermal Indicator in Hawaii Author: Cox, M. E. Year: 1979 This report discusses some of the problems in using the Si02-temperature criteria for shallow groundwater assessment and the applications of the Cl/Mg ratio. Also presented are those areas within the state that are considered to possess potential on the basis of their Cl/Mg ratio Title: Chloride/Magnesium Ratio of Shallow Groundwaters as a Regional Geothermal Indicator in Hawaii Author: Cox, M. E. Year: 1979 This report discusses some of the problems in using the Si02-temperature criteria for shallow groundwater assessment and the applications of the Cl/Mg ratio. Also presented are those areas within the state that are considered to possess potential on the basis of their Cl/Mg ratio Close

• 65. [Image] Neutron Formation Temperature Gauge and Neutron Activation Analysis Brine Flow Meter. Final Report, October 1, 1976--March 31, 1978

  	Feasibility studies of nuclear techniques applicable to the determination of geothermal formation temperature and two-phase brine flow downhole have been performed. The formation temperature gauging technique ...
  	Citation × Citation Citation Abstract Copy Title: Neutron Formation Temperature Gauge and Neutron Activation Analysis Brine Flow Meter. Final Report, October 1, 1976--March 31, 1978 Author: Vagelatos, N. Year: 1978 Feasibility studies of nuclear techniques applicable to the determination of geothermal formation temperature and two-phase brine flow downhole have been performed. The formation temperature gauging technique involves injection of fast neutrons into the formation and analysis of the moderated slow neutron energy distribution by appropriately filtered neutron detectors. The scientific feasibility of the method has been demonstrated by analytical computational and experimental evaluation of the system response. A data analysis method has been developed to determine unambiguously the temperature, neutron absorption cross section and neutron moderating power of an arbitrary medium. The initial phase of a program to demonstrate the engineering feasibility of the technique has been performed. A sonde mockup was fabricated and measurements have been performed in a test stand designed to simulate a geothermal well. The results indicate that the formation temperature determined by this method is independent of differences between the temperature in the borehole fluid and the formation, borehole fluid density, and borehole fluid salinity. Estimates of performance specifications for a formation temperature sonde have been made on the basis of information obtained in this study and a conceptual design of a logging system has been developed. The technique for the determination of fluid flow in a well is based on neutron activation analysis of elements present in the brine. An analytical evaluation of the method has been performed. The results warrant further, experimental evaluation Title: Neutron Formation Temperature Gauge and Neutron Activation Analysis Brine Flow Meter. Final Report, October 1, 1976--March 31, 1978 Author: Vagelatos, N. Year: 1978 Feasibility studies of nuclear techniques applicable to the determination of geothermal formation temperature and two-phase brine flow downhole have been performed. The formation temperature gauging technique involves injection of fast neutrons into the formation and analysis of the moderated slow neutron energy distribution by appropriately filtered neutron detectors. The scientific feasibility of the method has been demonstrated by analytical computational and experimental evaluation of the system response. A data analysis method has been developed to determine unambiguously the temperature, neutron absorption cross section and neutron moderating power of an arbitrary medium. The initial phase of a program to demonstrate the engineering feasibility of the technique has been performed. A sonde mockup was fabricated and measurements have been performed in a test stand designed to simulate a geothermal well. The results indicate that the formation temperature determined by this method is independent of differences between the temperature in the borehole fluid and the formation, borehole fluid density, and borehole fluid salinity. Estimates of performance specifications for a formation temperature sonde have been made on the basis of information obtained in this study and a conceptual design of a logging system has been developed. The technique for the determination of fluid flow in a well is based on neutron activation analysis of elements present in the brine. An analytical evaluation of the method has been performed. The results warrant further, experimental evaluation Close

• 66. [Image] Assessment of geothermal resources of Caliente, Nevada

  	An assessment of the geothermal resources of Caliente, Nevada was made to provide information on resource characteristics and to site 2 (two) 500 ft (152 m) test wells to confirm the resource. The strategy ...
  	Citation × Citation Citation Abstract Copy Title: Assessment of geothermal resources of Caliente, Nevada Author: Trexler, D.T. Year: 1980 An assessment of the geothermal resources of Caliente, Nevada was made to provide information on resource characteristics and to site 2 (two) 500 ft (152 m) test wells to confirm the resource. The strategy used in the resource assessment employed a logical sequence of work elements that included 1) baseline data collection, 2) field investigations, 3) laboratory analyses and 4) data interpretation and synthesis. Airphoto interpretation indicated that a series of normal faults produced a stepped arrangement in the canyon walls on the west side of Meadow Valley Wash north of downtown Caiente. This area coincides with the area of known geothermal occurrences. Temperature measurements in existing wells indicate a rapid cooling of the geothermal waters as they mix with cold groundwater flows in Meadow Valley Wash. Soil mercury analyses range from 15 ppB to as high as 120 ppB. Trends in soil mercury content may indicate the presence of buried faults. Temperature measured in 2-meter deep auger holes indicated temperatures as high as 40/sup 0/C in an area north of the Lincoln County Medical Facility. Interpretation of chemical analyses, both major and minor, of waters collected from wells and streams in the area failed to conclusively show any mechanisms for the mixing of thermal and nonthermal waters. The selection of sites for the 2 (two) 500 ft (152 m) reservoir confirmation wells was made using the results of temperature surveys, geologic structure and historic observations; DOE/NV/10039-1 Title: Assessment of geothermal resources of Caliente, Nevada Author: Trexler, D.T. Year: 1980 An assessment of the geothermal resources of Caliente, Nevada was made to provide information on resource characteristics and to site 2 (two) 500 ft (152 m) test wells to confirm the resource. The strategy used in the resource assessment employed a logical sequence of work elements that included 1) baseline data collection, 2) field investigations, 3) laboratory analyses and 4) data interpretation and synthesis. Airphoto interpretation indicated that a series of normal faults produced a stepped arrangement in the canyon walls on the west side of Meadow Valley Wash north of downtown Caiente. This area coincides with the area of known geothermal occurrences. Temperature measurements in existing wells indicate a rapid cooling of the geothermal waters as they mix with cold groundwater flows in Meadow Valley Wash. Soil mercury analyses range from 15 ppB to as high as 120 ppB. Trends in soil mercury content may indicate the presence of buried faults. Temperature measured in 2-meter deep auger holes indicated temperatures as high as 40/sup 0/C in an area north of the Lincoln County Medical Facility. Interpretation of chemical analyses, both major and minor, of waters collected from wells and streams in the area failed to conclusively show any mechanisms for the mixing of thermal and nonthermal waters. The selection of sites for the 2 (two) 500 ft (152 m) reservoir confirmation wells was made using the results of temperature surveys, geologic structure and historic observations; DOE/NV/10039-1 Close

• 67. [Image] Geochemistry of the Colado geothermal area, Pershing County, Nevada

  	Multielement geochemical analysis of drill cuttings from 18 shallow and 2 intermediate-depth temperature gradient holes outlines an area of anomalous geochemistry related to the fluid flow and temperature ...
  	Citation × Citation Citation Abstract Copy Title: Geochemistry of the Colado geothermal area, Pershing County, Nevada Author: Christensen, O.D. Year: 1980 Multielement geochemical analysis of drill cuttings from 18 shallow and 2 intermediate-depth temperature gradient holes outlines an area of anomalous geochemistry related to the fluid flow and temperature distribution within the Colado geothermal area. The concentrations of Hg, As, Li, and Be belong to more than one statistical population and provide the clearest expression of hydrothermal processes. Enrichments of these four elements define anomalous zones which are spatially coincident with a measured temperature anomaly. The spatial distribution suggests that thermal fluid rises into alluvium in the vicinity of a major Basin and Range fault to depths of 200 to 400 feet (60 to 120 m), then flows laterally within shallow alluvial aquifers down the local hydrologic gradient. As the fluid cools, Li, Be, As, and Hg are deposited in response to changing physical and chemical conditions. As and Be appear to be deposited early in higher temperature zones; Li begins to deposit early but forms a rather dispersed geochemical anomaly; Hg is anomalous throughout the entire geothermal area but is concentrated in a shallow halo above the As and Be anomalies. The distributions suggest that the entry of thermal fluids from depth into the alluvium is spatially restricted to a small area and that the larger area of the observed thermal anomaly is due to the flow of warm fluid within shallow aquifers; DOE/ID/12079-9; ESL-39 Title: Geochemistry of the Colado geothermal area, Pershing County, Nevada Author: Christensen, O.D. Year: 1980 Multielement geochemical analysis of drill cuttings from 18 shallow and 2 intermediate-depth temperature gradient holes outlines an area of anomalous geochemistry related to the fluid flow and temperature distribution within the Colado geothermal area. The concentrations of Hg, As, Li, and Be belong to more than one statistical population and provide the clearest expression of hydrothermal processes. Enrichments of these four elements define anomalous zones which are spatially coincident with a measured temperature anomaly. The spatial distribution suggests that thermal fluid rises into alluvium in the vicinity of a major Basin and Range fault to depths of 200 to 400 feet (60 to 120 m), then flows laterally within shallow alluvial aquifers down the local hydrologic gradient. As the fluid cools, Li, Be, As, and Hg are deposited in response to changing physical and chemical conditions. As and Be appear to be deposited early in higher temperature zones; Li begins to deposit early but forms a rather dispersed geochemical anomaly; Hg is anomalous throughout the entire geothermal area but is concentrated in a shallow halo above the As and Be anomalies. The distributions suggest that the entry of thermal fluids from depth into the alluvium is spatially restricted to a small area and that the larger area of the observed thermal anomaly is due to the flow of warm fluid within shallow aquifers; DOE/ID/12079-9; ESL-39 Close

• 68. [Image] Static Downhole Characteristics of Well CGEH-1 at Coso Hot Springs, China Lake, California

  	A series of measurements was made in the exploratory well CGEH-1 at Coso Hot Springs. The temperature measurements provide estimates for the thermal equilibration of the well and indicate that the fractures ...
  	Citation × Citation Citation Abstract Copy Title: Static Downhole Characteristics of Well CGEH-1 at Coso Hot Springs, China Lake, California Author: Goranson, C. Year: 1978 A series of measurements was made in the exploratory well CGEH-1 at Coso Hot Springs. The temperature measurements provide estimates for the thermal equilibration of the well and indicate that the fractures intersecting the well have different temperatures. The hottest fractures are in the upper-cased portion of the well. Downhole chemical sampling suggests that the borehole still contains remnants of drilling materials. The well has never been extensively flowed at this time Title: Static Downhole Characteristics of Well CGEH-1 at Coso Hot Springs, China Lake, California Author: Goranson, C. Year: 1978 A series of measurements was made in the exploratory well CGEH-1 at Coso Hot Springs. The temperature measurements provide estimates for the thermal equilibration of the well and indicate that the fractures intersecting the well have different temperatures. The hottest fractures are in the upper-cased portion of the well. Downhole chemical sampling suggests that the borehole still contains remnants of drilling materials. The well has never been extensively flowed at this time Close

• 69. [Image] Formation Temperature Gauge Feasibility Study. Volume II, Interim Report

  	The present status of the formation temperature gauge feasibility study is reported. It also demonstrates the feasibility of the technique in the simplified situations examined to date both analytically ...
  	Citation × Citation Citation Abstract Copy Title: Formation Temperature Gauge Feasibility Study. Volume II, Interim Report Author: IRT Corporation Year: 1977 The present status of the formation temperature gauge feasibility study is reported. It also demonstrates the feasibility of the technique in the simplified situations examined to date both analytically and experimentally. The first section deals with the theory underlying the technique. The next three sections describe the temperature gauge, the simplified model calculations of the gauge response, and the preliminary experimental measurements performed to verify the results of the computational study. The final section describes the formation temperature test stand designed to demonstrate the feasibility of the technique in the geothermal well geometry. This test stand has been assembled and measurements of the gauge response will begin shortly. These are outlined at the end of this report Title: Formation Temperature Gauge Feasibility Study. Volume II, Interim Report Author: IRT Corporation Year: 1977 The present status of the formation temperature gauge feasibility study is reported. It also demonstrates the feasibility of the technique in the simplified situations examined to date both analytically and experimentally. The first section deals with the theory underlying the technique. The next three sections describe the temperature gauge, the simplified model calculations of the gauge response, and the preliminary experimental measurements performed to verify the results of the computational study. The final section describes the formation temperature test stand designed to demonstrate the feasibility of the technique in the geothermal well geometry. This test stand has been assembled and measurements of the gauge response will begin shortly. These are outlined at the end of this report Close

• 70. [Image] Water quality monitoring : technical guide book

  	"July 1999."
  	Citation × Citation Citation Abstract Copy Title: Water quality monitoring : technical guide book Author: Oregon. Governor's Watershed Enhancement Board Year: 1999, 2005, 2004 "July 1999." Title: Water quality monitoring : technical guide book Author: Oregon. Governor's Watershed Enhancement Board Year: 1999, 2005, 2004 "July 1999." Close