Search

Search Results

• 1. [Article] Mosier Valley Groundwater Conservation Action Plan: Concept Paper

  Abstract -- This concept paper attempts to describe a groundwater conservation action plan to reverse the overdraft of groundwater in the Mosier Valley, allowing for sustainable use of the resource, and ...

  Citation × Citation Citation Abstract Copy Title: Mosier Valley Groundwater Conservation Action Plan: Concept Paper Abstract -- This concept paper attempts to describe a groundwater conservation action plan to reverse the overdraft of groundwater in the Mosier Valley, allowing for sustainable use of the resource, and conservation of all natural resource values in the Mosier Valley, including homeownership, agriculture, stream flows, and fish and wildlife habitat. Title: Mosier Valley Groundwater Conservation Action Plan: Concept Paper Abstract -- This concept paper attempts to describe a groundwater conservation action plan to reverse the overdraft of groundwater in the Mosier Valley, allowing for sustainable use of the resource, and conservation of all natural resource values in the Mosier Valley, including homeownership, agriculture, stream flows, and fish and wildlife habitat. Close

• 2. [Article] Wildlife and Vehicle Collision Hotspots - Lines

  Abstract -- High frequency wildlife carcass incidents (from Oregon Department of Transportation dispatch records of carcass reports, 1995 - 2006, all state highways.) Includes only records of deer and ...

  Citation × Citation Citation Abstract Copy Title: Wildlife and Vehicle Collision Hotspots - Lines Abstract -- High frequency wildlife carcass incidents (from Oregon Department of Transportation dispatch records of carcass reports, 1995 - 2006, all state highways.) Includes only records of deer and elk, with reported precision of >= 0.5 mile. Hot spots were derived from a kernel density probability analysis, and mapped using the Jenks Natural Breaks method to rank the values into five continuous categories. Model parameters include 100x100 grid cells and a 5280 foot search radius. Title: Wildlife and Vehicle Collision Hotspots - Lines Abstract -- High frequency wildlife carcass incidents (from Oregon Department of Transportation dispatch records of carcass reports, 1995 - 2006, all state highways.) Includes only records of deer and elk, with reported precision of >= 0.5 mile. Hot spots were derived from a kernel density probability analysis, and mapped using the Jenks Natural Breaks method to rank the values into five continuous categories. Model parameters include 100x100 grid cells and a 5280 foot search radius. Close

• 3. [Article] Wildlife and Vehicle Collision Hotspots - Points

  Abstract -- High frequency wildlife carcass incidents (from Oregon Department of Transportation dispatch records of carcass reports, 1995 - 2006, all state highways.) Includes only records of deer and ...

  Citation × Citation Citation Abstract Copy Title: Wildlife and Vehicle Collision Hotspots - Points Abstract -- High frequency wildlife carcass incidents (from Oregon Department of Transportation dispatch records of carcass reports, 1995 - 2006, all state highways.) Includes only records of deer and elk, with reported precision of >= 0.5 mile. Hot spots were derived from a kernel density probability analysis, and mapped using the Jenks Natural Breaks method to rank the values into five continuous categories. Model parameters include 100x100 grid cells and a 5280 foot search radius. Title: Wildlife and Vehicle Collision Hotspots - Points Abstract -- High frequency wildlife carcass incidents (from Oregon Department of Transportation dispatch records of carcass reports, 1995 - 2006, all state highways.) Includes only records of deer and elk, with reported precision of >= 0.5 mile. Hot spots were derived from a kernel density probability analysis, and mapped using the Jenks Natural Breaks method to rank the values into five continuous categories. Model parameters include 100x100 grid cells and a 5280 foot search radius. Close

• 4. [Article] Vector Control - Wetlands of Concern

  Abstract -- The Wetlands of Concern dataset represents one type of “sensitive area” for the purpose of reviewing and approving Pesticide Use Plans per ODFW's obligations under ORS 452.140 and ORS 452.245. ...

  Citation × Citation Citation Abstract Copy Title: Vector Control - Wetlands of Concern Abstract -- The Wetlands of Concern dataset represents one type of “sensitive area” for the purpose of reviewing and approving Pesticide Use Plans per ODFW's obligations under ORS 452.140 and ORS 452.245. ODFW will only make recommendations for mosquito control treatment protocols on sensitive areas, as identified in ODFW's Vector Control Guidance for Sensitive Areas (http://www.dfw.state.or.us/fish/water/docs/Sensitive_Area_Guidance.pdf) or confirmed by the local fish and wildlife biologists utilizing the guidelines in the document. In general, a sensitive area is any area where fish and wildlife and their habitats are rare or of local importance due to their special nature or role in the ecosystem. Species-specific and location-specific details are not maintained in this dataset. This dataset is derived from the Oregon Wetlands Cover. The Oregon Wetlands Cover is a key component of the Oregon Wetland Explorer data portal (http://oregonexplorer.info/wetlands), and is intended to (1) serve as a framework for storing and disseminating information on the state's wetlands, and (2) promote comprehensive monitoring, assessment, conservation, and restoration of Oregon's wetlands. Wetlands with a Total Conservation Significance score of 70 and above were included in this dataset for the purpose of identifying wetlands of concern for vector control purposes. Title: Vector Control - Wetlands of Concern Abstract -- The Wetlands of Concern dataset represents one type of “sensitive area” for the purpose of reviewing and approving Pesticide Use Plans per ODFW's obligations under ORS 452.140 and ORS 452.245. ODFW will only make recommendations for mosquito control treatment protocols on sensitive areas, as identified in ODFW's Vector Control Guidance for Sensitive Areas (http://www.dfw.state.or.us/fish/water/docs/Sensitive_Area_Guidance.pdf) or confirmed by the local fish and wildlife biologists utilizing the guidelines in the document. In general, a sensitive area is any area where fish and wildlife and their habitats are rare or of local importance due to their special nature or role in the ecosystem. Species-specific and location-specific details are not maintained in this dataset. This dataset is derived from the Oregon Wetlands Cover. The Oregon Wetlands Cover is a key component of the Oregon Wetland Explorer data portal (http://oregonexplorer.info/wetlands), and is intended to (1) serve as a framework for storing and disseminating information on the state's wetlands, and (2) promote comprehensive monitoring, assessment, conservation, and restoration of Oregon's wetlands. Wetlands with a Total Conservation Significance score of 70 and above were included in this dataset for the purpose of identifying wetlands of concern for vector control purposes. Close

• 5. [Article] ODFW Wildlife Linkages Datasets

  Abstract -- Two GIS datasets are contained in this record: The Oregon Department of Fish and Wildlife, under the Oregon Wildlife Movement Strategy and in partnership with other government agencies, has ...

  Citation × Citation Citation Abstract Copy Title: ODFW Wildlife Linkages Datasets Abstract -- Two GIS datasets are contained in this record: The Oregon Department of Fish and Wildlife, under the Oregon Wildlife Movement Strategy and in partnership with other government agencies, has worked to produce this dataset of wildlife linkages, which are key movement areas for wildlife, emphasizing areas that cross paved roads. The primary goal of this dataset and its related attributes are to address the question: "Where is the best place on the landscape to provide for animal movement needs that are essential to life history function?" Title: ODFW Wildlife Linkages Datasets Abstract -- Two GIS datasets are contained in this record: The Oregon Department of Fish and Wildlife, under the Oregon Wildlife Movement Strategy and in partnership with other government agencies, has worked to produce this dataset of wildlife linkages, which are key movement areas for wildlife, emphasizing areas that cross paved roads. The primary goal of this dataset and its related attributes are to address the question: "Where is the best place on the landscape to provide for animal movement needs that are essential to life history function?" Close

• 6. [Article] ODFW Conservation Opportunity Areas

  Abstract -- Conservation Opportunity Areas were developed for the Comprehensive Wildlife Conservation Strategy to help identify priority areas for conservation actions that directly benefit wildlife and ...

  Citation × Citation Citation Abstract Copy Title: ODFW Conservation Opportunity Areas Abstract -- Conservation Opportunity Areas were developed for the Comprehensive Wildlife Conservation Strategy to help identify priority areas for conservation actions that directly benefit wildlife and habitats. Title: ODFW Conservation Opportunity Areas Abstract -- Conservation Opportunity Areas were developed for the Comprehensive Wildlife Conservation Strategy to help identify priority areas for conservation actions that directly benefit wildlife and habitats. Close

• 7. [Article] Understanding Sand Mining on the Maha Oya: The Conflict Between Economic and Environmental Survival

  River sand mining from the Maha Oya is the main source of income and a force that drives economic activity for residents along the river. This study takes place in Sri Lanka, there are three villages included ...

  Citation × Citation Citation Abstract Copy Title: Understanding Sand Mining on the Maha Oya: The Conflict Between Economic and Environmental Survival Author: Talbert, Meredith Corea Year: 2012 River sand mining from the Maha Oya is the main source of income and a force that drives economic activity for residents along the river. This study takes place in Sri Lanka, there are three villages included in this project: Jambugaswatte, Janituspuraya and Thoppuwa. In Sri Lanka, sand serves as the main building material. It is used to make bricks, tiles, asphalt and concrete, therefore demanding a high market value. However, the over-extraction of sand comes along with significant environmental problems. These communities depend on the river in many ways and the health of the river directly corresponds to the health of the ecosystem as a whole. Along the Maha Oya two important elements of survival are in conflict with one another: residents simultaneously need a healthy, thriving ecosystem to live in, as well as economic opportunities. With support from the Environmental Foundation Ltd. (EFL)--a Sri Lankan environmental justice NGO--this study focuses on the complex situation with sand mining on the Maha Oya. Data for this study comes from fifteen formal interviews with a Sinhala-English translator. These interviews are used to address the two research questions for this project: how do village residents along the Maha Oya perceive sand mining? And what are the emotional, practical and theoretical responses of village residents to the effects of sand mining on their local ecosystems? In order to envision a sustainable future, it is vital to begin with a clear understanding of community perceptions of these complex issues, which are at the heart of this project. Title: Understanding Sand Mining on the Maha Oya: The Conflict Between Economic and Environmental Survival Author: Talbert, Meredith Corea Year: 2012 River sand mining from the Maha Oya is the main source of income and a force that drives economic activity for residents along the river. This study takes place in Sri Lanka, there are three villages included in this project: Jambugaswatte, Janituspuraya and Thoppuwa. In Sri Lanka, sand serves as the main building material. It is used to make bricks, tiles, asphalt and concrete, therefore demanding a high market value. However, the over-extraction of sand comes along with significant environmental problems. These communities depend on the river in many ways and the health of the river directly corresponds to the health of the ecosystem as a whole. Along the Maha Oya two important elements of survival are in conflict with one another: residents simultaneously need a healthy, thriving ecosystem to live in, as well as economic opportunities. With support from the Environmental Foundation Ltd. (EFL)--a Sri Lankan environmental justice NGO--this study focuses on the complex situation with sand mining on the Maha Oya. Data for this study comes from fifteen formal interviews with a Sinhala-English translator. These interviews are used to address the two research questions for this project: how do village residents along the Maha Oya perceive sand mining? And what are the emotional, practical and theoretical responses of village residents to the effects of sand mining on their local ecosystems? In order to envision a sustainable future, it is vital to begin with a clear understanding of community perceptions of these complex issues, which are at the heart of this project. Close

• 8. [Article] Assessment of an Optimal Bus Stop Spacing Model Using High Resolution Archived Stop-Level Data

  In practice, the design of bus routes and stop placement involves calculated trade-offs between service frequency, quality, and access. Increased stop density improves access but contributes to slow operating ...

  Citation × Citation Citation Abstract Copy Title: Assessment of an Optimal Bus Stop Spacing Model Using High Resolution Archived Stop-Level Data Author: Li, Huan Year: 2011 In practice, the design of bus routes and stop placement involves calculated trade-offs between service frequency, quality, and access. Increased stop density improves access but contributes to slow operating speeds and increased operating costs. In this thesis, a optimized bus stop spacing model is applied using the high resolution archived stop-level bus performance data from the Bus Dispatch System (BDS) provided by TriMet, the regional transit provider for the Portland metropolitan area. Two cost components are considered in the stop spacing model including passenger access cost and in-vehicle passenger stopping cost, and are combined and optimized to minimize total cost. A case-study is presented using one year's stop-level data from one bus route 19 in Portland, Oregon. The analysis considered both inbound and outbound stop spacing and determined the optimal average stop spacing based on an all-day, peak and off-peak time periods. Based on the analysis considering inbound trips over the entire day, the theoretical optimized bus stop spacing was about 1,200 feet, as compared to the current value of 890 feet. This paper also builds on the all day analysis and focuses on inbound and outbound trips during peak periods, resulting in optimized spacing of about 1,300 feet. The peak hour demand has a significant impact on the transit operation. A bus stop consolidation scheme is proposed for the analyzed bus route considering the peak hour transit demand. Finally, the thesis discusses trade-offs and presents an estimate of transit operating cost savings based on the optimized spacing. Given the growing availability of high-resolution archived data, the thesis illustrates that this modeling tool can be applied in a routine way across multiple routes as part of an ongoing service planning and performance measurement process. Title: Assessment of an Optimal Bus Stop Spacing Model Using High Resolution Archived Stop-Level Data Author: Li, Huan Year: 2011 In practice, the design of bus routes and stop placement involves calculated trade-offs between service frequency, quality, and access. Increased stop density improves access but contributes to slow operating speeds and increased operating costs. In this thesis, a optimized bus stop spacing model is applied using the high resolution archived stop-level bus performance data from the Bus Dispatch System (BDS) provided by TriMet, the regional transit provider for the Portland metropolitan area. Two cost components are considered in the stop spacing model including passenger access cost and in-vehicle passenger stopping cost, and are combined and optimized to minimize total cost. A case-study is presented using one year's stop-level data from one bus route 19 in Portland, Oregon. The analysis considered both inbound and outbound stop spacing and determined the optimal average stop spacing based on an all-day, peak and off-peak time periods. Based on the analysis considering inbound trips over the entire day, the theoretical optimized bus stop spacing was about 1,200 feet, as compared to the current value of 890 feet. This paper also builds on the all day analysis and focuses on inbound and outbound trips during peak periods, resulting in optimized spacing of about 1,300 feet. The peak hour demand has a significant impact on the transit operation. A bus stop consolidation scheme is proposed for the analyzed bus route considering the peak hour transit demand. Finally, the thesis discusses trade-offs and presents an estimate of transit operating cost savings based on the optimized spacing. Given the growing availability of high-resolution archived data, the thesis illustrates that this modeling tool can be applied in a routine way across multiple routes as part of an ongoing service planning and performance measurement process. Close

• 9. [Article] The Development of Embedded DRAM Statistical Quality Models at Test and Use Conditions

  Today, the use of embedded Dynamic Random Access Memory (eDRAM) is increasing in our electronics that require large memories, such as gaming consoles and computer network routers. Unlike external DRAMs, ...

  Citation × Citation Citation Abstract Copy Title: The Development of Embedded DRAM Statistical Quality Models at Test and Use Conditions Author: Suzuki, Satoshi Year: 2010 Today, the use of embedded Dynamic Random Access Memory (eDRAM) is increasing in our electronics that require large memories, such as gaming consoles and computer network routers. Unlike external DRAMs, eDRAMs are embedded inside ASICs for faster read and write operations. Until recently, eDRAMs required high manufacturing cost. Present process technology developments enabled the manufacturing of eDRAM at competitive costs. Unlike SRAM, eDRAM exhibits retention time bit fails from defects and capacitor leakage current. This retention time fail causes memory bits to lose stored values before refresh. Also, a small portion of the memory bits are known to fail at a random retention time. At test conditions, more stringent than use conditions, if all possible retention time fail bits are detected and replaced, there will be no additional fail bits during use. However, detecting all the retention time fails requires long time and also rejects bits that do not fail at the use condition. This research seeks to maximize the detection of eDRAM fail bits during test by determining effective test conditions and model the failure rate of eDRAM retention time during use conditions. Title: The Development of Embedded DRAM Statistical Quality Models at Test and Use Conditions Author: Suzuki, Satoshi Year: 2010 Today, the use of embedded Dynamic Random Access Memory (eDRAM) is increasing in our electronics that require large memories, such as gaming consoles and computer network routers. Unlike external DRAMs, eDRAMs are embedded inside ASICs for faster read and write operations. Until recently, eDRAMs required high manufacturing cost. Present process technology developments enabled the manufacturing of eDRAM at competitive costs. Unlike SRAM, eDRAM exhibits retention time bit fails from defects and capacitor leakage current. This retention time fail causes memory bits to lose stored values before refresh. Also, a small portion of the memory bits are known to fail at a random retention time. At test conditions, more stringent than use conditions, if all possible retention time fail bits are detected and replaced, there will be no additional fail bits during use. However, detecting all the retention time fails requires long time and also rejects bits that do not fail at the use condition. This research seeks to maximize the detection of eDRAM fail bits during test by determining effective test conditions and model the failure rate of eDRAM retention time during use conditions. Close

• 10. [Article] The Tensile Strength of Liquid Nitrogen

  The tensile strength or the negative pressure required to induce cavitation in a pure liquid has been a puzzling subject. On one hand, the classical nucleation theory has met great success in predicting ...

  Citation × Citation Citation Abstract Copy Title: The Tensile Strength of Liquid Nitrogen Author: Huang, Jian Year: 1992 The tensile strength or the negative pressure required to induce cavitation in a pure liquid has been a puzzling subject. On one hand, the classical nucleation theory has met great success in predicting the nucleation rates of superheated liquids. On the other hand, most of reported experimental values of the tensile strength for different liquids are far below the prediction from the classical nucleation theory. In this study, homogeneous nucleation in liquid nitrogen and its tensile strength have been investigated. In order to carry out the measurement of the tensile strength of liquid nitrogen, different approaches for determining the pressure amplitude were studied carefully. It is shown that Raman-Nath theory, as modified by the introduction of an effective interaction length, can be used to determine the pressure amplitude in the focal plane of a focusing ultrasonic transducer. The results obtained from different diffraction orders are consistent and in good agreement with other approaches including Debye's theory and solving the KZK (Khokhlov-Zabolotskaya-Kuznetsov) equation. The results from experiments in water demonstrated that as long as the nonlinearity is not too large, the experimentally determined pressure follows closely the calculated results using either Debye's theory or the KZK equation. In addition, the light diffraction contains enough information to calculate the second-order harmonic in the sound wave. In principle, it is possible that the contribution to the acoustic wave of the higher than the second-order harmonic can be obtained. The measurement of the tensile strength was carried out in a high pressure stainless steel dewar. A High intensity ultrasonic wave was focused into a small volume of liquid nitrogen in a short time period. A probe laser beam passes through the focal region of a concave spherical transducer with small aperture angle and the transmitted light is detected with a photodiode. When the voltage on the transducer reaches a critical point, nucleation in the focal region occurs and a characteristic signal associated with the nucleation was obtained. At this moment, the pressure amplitude at the focus is calculated based on the acoustic power radiated into the liquid. In the experiment, the electrical signal on the transducer is gated at its resonance frequency with gate widths of 20 ~s to 0.2 ms and temperature range from 77 K to near 100 K. The calculated pressure amplitude is in agreement with the prediction of classical nucleation theory for the nucleation rates from 106 to lOll (bubbles/cm3 sec). This work enhances our understanding of the nucleation process in liquids. It provides the direct experimental support that the validity of the classical nucleation theory can be extended to the region of the negative pressure up to 90 atm. This is only the second cryogenic liquid to reach the tensile strength predicted from the classical nucleation theory. Title: The Tensile Strength of Liquid Nitrogen Author: Huang, Jian Year: 1992 The tensile strength or the negative pressure required to induce cavitation in a pure liquid has been a puzzling subject. On one hand, the classical nucleation theory has met great success in predicting the nucleation rates of superheated liquids. On the other hand, most of reported experimental values of the tensile strength for different liquids are far below the prediction from the classical nucleation theory. In this study, homogeneous nucleation in liquid nitrogen and its tensile strength have been investigated. In order to carry out the measurement of the tensile strength of liquid nitrogen, different approaches for determining the pressure amplitude were studied carefully. It is shown that Raman-Nath theory, as modified by the introduction of an effective interaction length, can be used to determine the pressure amplitude in the focal plane of a focusing ultrasonic transducer. The results obtained from different diffraction orders are consistent and in good agreement with other approaches including Debye's theory and solving the KZK (Khokhlov-Zabolotskaya-Kuznetsov) equation. The results from experiments in water demonstrated that as long as the nonlinearity is not too large, the experimentally determined pressure follows closely the calculated results using either Debye's theory or the KZK equation. In addition, the light diffraction contains enough information to calculate the second-order harmonic in the sound wave. In principle, it is possible that the contribution to the acoustic wave of the higher than the second-order harmonic can be obtained. The measurement of the tensile strength was carried out in a high pressure stainless steel dewar. A High intensity ultrasonic wave was focused into a small volume of liquid nitrogen in a short time period. A probe laser beam passes through the focal region of a concave spherical transducer with small aperture angle and the transmitted light is detected with a photodiode. When the voltage on the transducer reaches a critical point, nucleation in the focal region occurs and a characteristic signal associated with the nucleation was obtained. At this moment, the pressure amplitude at the focus is calculated based on the acoustic power radiated into the liquid. In the experiment, the electrical signal on the transducer is gated at its resonance frequency with gate widths of 20 ~s to 0.2 ms and temperature range from 77 K to near 100 K. The calculated pressure amplitude is in agreement with the prediction of classical nucleation theory for the nucleation rates from 106 to lOll (bubbles/cm3 sec). This work enhances our understanding of the nucleation process in liquids. It provides the direct experimental support that the validity of the classical nucleation theory can be extended to the region of the negative pressure up to 90 atm. This is only the second cryogenic liquid to reach the tensile strength predicted from the classical nucleation theory. Close