Search

Search Results

• 51. [Image] Geothermal Resources, Vicksburg Formation, Texas Gulf Coast

  	The potential for discovering geopressured geothermal reservoirs in the Vicksburg Formation is limited to Hidalgo County along the Lower Texas Gulf Coast. In Hidalgo County, an area of approximately 385 ...
  	Citation × Citation Citation Abstract Copy Title: Geothermal Resources, Vicksburg Formation, Texas Gulf Coast Author: Loucks, R.G. Year: 1978 The potential for discovering geopressured geothermal reservoirs in the Vicksburg Formation is limited to Hidalgo County along the Lower Texas Gulf Coast. In Hidalgo County, an area of approximately 385 square miles (designated the Vicksburg Fairway) contains up to 1,300 feet of geopressured sandstones with fluid temperatures greater than 300/sup 0/F. In-place effective permeability, however, averages less than 1 millidarcy in the Vicksburg sandstones because of fine grain size and extensive late carbonate cementation. Also, areal extent of individual reservoirs is limited in a dip direction by growth faults and in a strike direction by the lenticular morphology of the sandstone bodies. In conclusion, under the present specifications set for a geothermal fairway, the Vicksburg has minimal potential because of low reservoir deliverability, which is constrained by low permeability and somewhat limited reservoir continuity. If future tests indicate that lower permeabilities are acceptable, the Vicksburg Fairway should be reconsidered because of the presence of extremely thick sandstone bodies Title: Geothermal Resources, Vicksburg Formation, Texas Gulf Coast Author: Loucks, R.G. Year: 1978 The potential for discovering geopressured geothermal reservoirs in the Vicksburg Formation is limited to Hidalgo County along the Lower Texas Gulf Coast. In Hidalgo County, an area of approximately 385 square miles (designated the Vicksburg Fairway) contains up to 1,300 feet of geopressured sandstones with fluid temperatures greater than 300/sup 0/F. In-place effective permeability, however, averages less than 1 millidarcy in the Vicksburg sandstones because of fine grain size and extensive late carbonate cementation. Also, areal extent of individual reservoirs is limited in a dip direction by growth faults and in a strike direction by the lenticular morphology of the sandstone bodies. In conclusion, under the present specifications set for a geothermal fairway, the Vicksburg has minimal potential because of low reservoir deliverability, which is constrained by low permeability and somewhat limited reservoir continuity. If future tests indicate that lower permeabilities are acceptable, the Vicksburg Fairway should be reconsidered because of the presence of extremely thick sandstone bodies Close

• 52. [Image] Site-Specific Analysis of Hybrid Geothermal / Fossil Power Plants Volume One: Roosevelt Hot Springs KGRA

  	The economics of a particular hybrid plant must be evaluated with respect to a specific site. This volume focuses on the Roosevelt Hot Springs KGRA. The temperature, pressure, and flow rate data given ...
  	Citation × Citation Citation Abstract Copy Title: Site-Specific Analysis of Hybrid Geothermal / Fossil Power Plants Volume One: Roosevelt Hot Springs KGRA Author: Burbank City Public Service Dept., CA (USA) Year: 1977 The economics of a particular hybrid plant must be evaluated with respect to a specific site. This volume focuses on the Roosevelt Hot Springs KGRA. The temperature, pressure, and flow rate data given suggests the site deserves serious consideration for a hybrid plant. Key siting considerations which must be addressed before an economic judgment can be attempted are presented as follows: the availability, quality, and cost of coal; the availability of water; and the availability of transmission. Seismological and climate factors are presented Title: Site-Specific Analysis of Hybrid Geothermal / Fossil Power Plants Volume One: Roosevelt Hot Springs KGRA Author: Burbank City Public Service Dept., CA (USA) Year: 1977 The economics of a particular hybrid plant must be evaluated with respect to a specific site. This volume focuses on the Roosevelt Hot Springs KGRA. The temperature, pressure, and flow rate data given suggests the site deserves serious consideration for a hybrid plant. Key siting considerations which must be addressed before an economic judgment can be attempted are presented as follows: the availability, quality, and cost of coal; the availability of water; and the availability of transmission. Seismological and climate factors are presented Close

• 53. [Image] Transient well testing in two-phase geothermal reservoirs

  	A study of well test analysis techniques in two-phase geothermal reservoirs has been conducted using a three-dimensional, two-phase, wellbore and reservoir simulation model. Well tests from Cerro Prieto ...
  	Citation × Citation Citation Abstract Copy Title: Transient well testing in two-phase geothermal reservoirs Author: Aydelotte, S.R. Year: 1980 A study of well test analysis techniques in two-phase geothermal reservoirs has been conducted using a three-dimensional, two-phase, wellbore and reservoir simulation model. Well tests from Cerro Prieto and the Hawaiian Geothermal project have been history matched. Using these well tests as a base, the influence of reservoir permeability, porosity, thickness, and heat capacity, along with flow rate and fracturing were studied. Single and two-phase transient well test equations were used to analyze these tests with poor results due to rapidly changing fluid properties and inability to calculate the flowing steam saturation in the reservoir. The injection of cold water into the reservoir does give good data from which formation properties can be calculated. Title: Transient well testing in two-phase geothermal reservoirs Author: Aydelotte, S.R. Year: 1980 A study of well test analysis techniques in two-phase geothermal reservoirs has been conducted using a three-dimensional, two-phase, wellbore and reservoir simulation model. Well tests from Cerro Prieto and the Hawaiian Geothermal project have been history matched. Using these well tests as a base, the influence of reservoir permeability, porosity, thickness, and heat capacity, along with flow rate and fracturing were studied. Single and two-phase transient well test equations were used to analyze these tests with poor results due to rapidly changing fluid properties and inability to calculate the flowing steam saturation in the reservoir. The injection of cold water into the reservoir does give good data from which formation properties can be calculated. Close

• 54. [Image] Geothermal Modeling of the Raft River Geothermal Field

  	The results to date of chemical modeling of the Raft River KGRA are presented. Earlier work indicated a northwest-southeast anomaly in the contours. Modeling techniques applied to more complete data allowed ...
  	Citation × Citation Citation Abstract Copy Title: Geothermal Modeling of the Raft River Geothermal Field Author: Overton, H.L. Year: 1979 The results to date of chemical modeling of the Raft River KGRA are presented. Earlier work indicated a northwest-southeast anomaly in the contours. Modeling techniques applied to more complete data allowed further definition of the anomaly. Models described in this report show the source of various minerals in the geothermal water. There appears to be a regional heat source that gives rise to uniform conductive heat flow in the region, but convective flow is concentrated near the upwelling in the Crook well vicinity. Recommendations are made concerning field expansion and additional work needed to refine the overall reservoir model; EGG-2004 Title: Geothermal Modeling of the Raft River Geothermal Field Author: Overton, H.L. Year: 1979 The results to date of chemical modeling of the Raft River KGRA are presented. Earlier work indicated a northwest-southeast anomaly in the contours. Modeling techniques applied to more complete data allowed further definition of the anomaly. Models described in this report show the source of various minerals in the geothermal water. There appears to be a regional heat source that gives rise to uniform conductive heat flow in the region, but convective flow is concentrated near the upwelling in the Crook well vicinity. Recommendations are made concerning field expansion and additional work needed to refine the overall reservoir model; EGG-2004 Close

• 55. [Image] Hawaii Geothermal Resource Assessment Program: western state cooperative direct heat resource assessment, Phase I. Final report

  	A regional geothermal resource assessment has been conducted for the major islands in the Hawaiian chain. The assessment was made through the compilation and evaluation of the readily accessible geological, ...
  	Citation × Citation Citation Abstract Copy Title: Hawaii Geothermal Resource Assessment Program: western state cooperative direct heat resource assessment, Phase I. Final report Year: 1978 A regional geothermal resource assessment has been conducted for the major islands in the Hawaiian chain. The assessment was made through the compilation and evaluation of the readily accessible geological, geochemical, and geophysical data for the Hawaiian archipelago which has been acquired during the last two decades. The geologic criteria used in the identification of possible geothermal reservoirs were: age and location of most recent volcanism on the island and the geologic structure of each island. The geochemical anomalies used as traces for geothermally altered ground water were: elevated silica concentrations and elevated chloride/magnesium ion ratios. Geophysical data used to identify subsurface structure which may have geothermal potential were: aeromagnetic anomalies, gravity anomalies, and higher than normal well and basal spring discharge temperatures. Geophysical and geochemical anomalies which may be the result of subsurface thermal effects have been identified on the islands of Hawaii, Maui, Molokai and Oahu; DOE/ID/01713-4 Title: Hawaii Geothermal Resource Assessment Program: western state cooperative direct heat resource assessment, Phase I. Final report Year: 1978 A regional geothermal resource assessment has been conducted for the major islands in the Hawaiian chain. The assessment was made through the compilation and evaluation of the readily accessible geological, geochemical, and geophysical data for the Hawaiian archipelago which has been acquired during the last two decades. The geologic criteria used in the identification of possible geothermal reservoirs were: age and location of most recent volcanism on the island and the geologic structure of each island. The geochemical anomalies used as traces for geothermally altered ground water were: elevated silica concentrations and elevated chloride/magnesium ion ratios. Geophysical data used to identify subsurface structure which may have geothermal potential were: aeromagnetic anomalies, gravity anomalies, and higher than normal well and basal spring discharge temperatures. Geophysical and geochemical anomalies which may be the result of subsurface thermal effects have been identified on the islands of Hawaii, Maui, Molokai and Oahu; DOE/ID/01713-4 Close

• 56. [Image] Geological and Geophysical Study of the Origin of the Warm Springs in Bath County, Virginia. Final Report, June 1, 1975--April 30, 1976

  	A study was made to determine the origin of the warm springs and to evaluate the geothermal resource potential of the area in the vicinity of the Warm Springs anticline in Bath and Alleghany Counties, ...
  	Citation × Citation Citation Abstract Copy Title: Geological and Geophysical Study of the Origin of the Warm Springs in Bath County, Virginia. Final Report, June 1, 1975--April 30, 1976 Author: Costain, J.K. Year: 1976 A study was made to determine the origin of the warm springs and to evaluate the geothermal resource potential of the area in the vicinity of the Warm Springs anticline in Bath and Alleghany Counties, Virginia. Phase 1 of the study was the compilation of a geologic map based on published maps and supported by reconnaissance geologic mapping in areas where published maps were not available. Phase II consisted of a regional bipole-dipole electric resistivity survey made in order to detect the presence of resistivity lows that might be associated with a geothermal system at depth. Phase III involved the drilling of a single hole to a depth of approximately 300 m to obtain a heat flow value that is representative of the area. The above data were used to arrive at a model that unambiguously explains the origin of thermal springs. It is concluded that the warm springs constitute a geothermal resource for low temperature application such as space heating (LBS) Title: Geological and Geophysical Study of the Origin of the Warm Springs in Bath County, Virginia. Final Report, June 1, 1975--April 30, 1976 Author: Costain, J.K. Year: 1976 A study was made to determine the origin of the warm springs and to evaluate the geothermal resource potential of the area in the vicinity of the Warm Springs anticline in Bath and Alleghany Counties, Virginia. Phase 1 of the study was the compilation of a geologic map based on published maps and supported by reconnaissance geologic mapping in areas where published maps were not available. Phase II consisted of a regional bipole-dipole electric resistivity survey made in order to detect the presence of resistivity lows that might be associated with a geothermal system at depth. Phase III involved the drilling of a single hole to a depth of approximately 300 m to obtain a heat flow value that is representative of the area. The above data were used to arrive at a model that unambiguously explains the origin of thermal springs. It is concluded that the warm springs constitute a geothermal resource for low temperature application such as space heating (LBS) Close

• 57. [Image] Planning, Drilling, Logging, and Testing of Energy Extraction Hole EE-1, Phases I and II

  	Energy Extraction Hole No. 1 (EE-1) is the second deep hole drilled into the Precambrian-age granitic rocks of the Jemez Mountains of north-central New Mexico. EE-1 was drilled to intersect a hydraulic ...
  	Citation × Citation Citation Abstract Copy Title: Planning, Drilling, Logging, and Testing of Energy Extraction Hole EE-1, Phases I and II Author: Pettitt, R.A. Year: 1977 Energy Extraction Hole No. 1 (EE-1) is the second deep hole drilled into the Precambrian-age granitic rocks of the Jemez Mountains of north-central New Mexico. EE-1 was drilled to intersect a hydraulic fracture extending outward from near the bottom of previously drilled hole GT-2, thus completing the underground circulation loop required for the hot dry rock geothermal energy extraction experiment. Directional drilling techniques were used to intersect the fracture zone. In addition, high-temperature instrumentation and equipment development, hydraulic fracturing experiments, pressure-flow testing of the fracture systems, and fracture mapping and borehole-ranging technique activities were conducted. The drilling, logging, and testing operations in EE-1 are described Title: Planning, Drilling, Logging, and Testing of Energy Extraction Hole EE-1, Phases I and II Author: Pettitt, R.A. Year: 1977 Energy Extraction Hole No. 1 (EE-1) is the second deep hole drilled into the Precambrian-age granitic rocks of the Jemez Mountains of north-central New Mexico. EE-1 was drilled to intersect a hydraulic fracture extending outward from near the bottom of previously drilled hole GT-2, thus completing the underground circulation loop required for the hot dry rock geothermal energy extraction experiment. Directional drilling techniques were used to intersect the fracture zone. In addition, high-temperature instrumentation and equipment development, hydraulic fracturing experiments, pressure-flow testing of the fracture systems, and fracture mapping and borehole-ranging technique activities were conducted. The drilling, logging, and testing operations in EE-1 are described Close

• 58. [Image] Klamath Falls Geothermal Heating District

  	The City of Klamath Falls is proposing to construct a geothermal district heating project. Initially, the system will heat 14 government buildings (Phase I) in the downtown area, subsequently expanded ...
  	Citation × Citation Citation Abstract Copy Title: Klamath Falls Geothermal Heating District Author: Lund, J. W. Year: 1979 The City of Klamath Falls is proposing to construct a geothermal district heating project. Initially, the system will heat 14 government buildings (Phase I) in the downtown area, subsequently expanded to heat 11 blocks (Phase II), and then to heat the entire 54 block central business district (Phase III). Production wells will be drilled along the east boundary of the City, estimated to supply over 220°F water. A primary 8 inch diameter insulated steel pipeline placed in a concrete tunnel will supply geothermal fluid to a central heat exchange facility at the County Museum Building. Two plate heat exchangers will provide the necessary load for the initial 14 buildings. An injection well is located next to this facility. A closed loop secondary pipeline will supply heat to the 14 buildings at 200°F. This line will consist of buried insulated fiberglass reinforced pipe. The capital cost of the systems (Phase I) will be $1.4 million giving an equivalent annual capital, operation, and maintenance cost over a 20 year period of $150,000. Phase II cost of geothermal energy is estimated at $0.29 per therm, whereas the equivalent annual fossil fuel cost is estimated at $0.94 per therm Title: Klamath Falls Geothermal Heating District Author: Lund, J. W. Year: 1979 The City of Klamath Falls is proposing to construct a geothermal district heating project. Initially, the system will heat 14 government buildings (Phase I) in the downtown area, subsequently expanded to heat 11 blocks (Phase II), and then to heat the entire 54 block central business district (Phase III). Production wells will be drilled along the east boundary of the City, estimated to supply over 220°F water. A primary 8 inch diameter insulated steel pipeline placed in a concrete tunnel will supply geothermal fluid to a central heat exchange facility at the County Museum Building. Two plate heat exchangers will provide the necessary load for the initial 14 buildings. An injection well is located next to this facility. A closed loop secondary pipeline will supply heat to the 14 buildings at 200°F. This line will consist of buried insulated fiberglass reinforced pipe. The capital cost of the systems (Phase I) will be $1.4 million giving an equivalent annual capital, operation, and maintenance cost over a 20 year period of $150,000. Phase II cost of geothermal energy is estimated at $0.29 per therm, whereas the equivalent annual fossil fuel cost is estimated at $0.94 per therm Close

• 59. [Image] Washington: A Guide to Geothermal Energy Development

  	A brief overview is given of the geological characteristics of each region of the state as they relate to potential geothermal development. Those exploration methods which can lead to the siting of a deep ...
  	Citation × Citation Citation Abstract Copy Title: Washington: A Guide to Geothermal Energy Development Author: Bloomquist, R.G. Year: 1980 A brief overview is given of the geological characteristics of each region of the state as they relate to potential geothermal development. Those exploration methods which can lead to the siting of a deep exploration well are described. Requirements and techniques needed for drilling deeper higher temperature exploration and production wells are presented. Electrical generation, direct utilization, and indirect utilization are reviewed. Economic factors of direct use projects are presented. A general guide to the regulatory framework affecting geothermal energy development is provided. The general steps necessary to gain access to explore, develop, distribute, and use geothermal resources are outlined (MHR) Title: Washington: A Guide to Geothermal Energy Development Author: Bloomquist, R.G. Year: 1980 A brief overview is given of the geological characteristics of each region of the state as they relate to potential geothermal development. Those exploration methods which can lead to the siting of a deep exploration well are described. Requirements and techniques needed for drilling deeper higher temperature exploration and production wells are presented. Electrical generation, direct utilization, and indirect utilization are reviewed. Economic factors of direct use projects are presented. A general guide to the regulatory framework affecting geothermal energy development is provided. The general steps necessary to gain access to explore, develop, distribute, and use geothermal resources are outlined (MHR) Close

• 60. [Image] Petrology of the Quaternary Volcanics of the Roosevelt KGRA, and Adjoining Area, Utah. Final Report, Volume 1

  	The Roosevelt KGRA (Known Geothermal Resource Area) located near Milford, Utah, is associated with a suite of quaternary silicic volcanics distributed for 15 km along the crest and western flank of the ...
  	Citation × Citation Citation Abstract Copy Title: Petrology of the Quaternary Volcanics of the Roosevelt KGRA, and Adjoining Area, Utah. Final Report, Volume 1 Author: Nash, W.P. Year: 1976 The Roosevelt KGRA (Known Geothermal Resource Area) located near Milford, Utah, is associated with a suite of quaternary silicic volcanics distributed for 15 km along the crest and western flank of the Mineral Mountains, a large tertiary granite batholith. The volcanics are high-silica rhyolites and occur as domes, flows and tuffs. Initial eruptions resulted in two flows of low viscosity, phenocryst-poor rhyolite. Later activity consisted of pyroclastic eruptions and the emplacement of at least 9 viscous domes. In addition to abundant glass the rhyolites contain alkali feldspar, plagioclase, biotite, iron-titanium oxides and small amounts of hornblende, allanite, apatite, zircon, sphene and topaz. Magmatic temperatures were about 700C and water fugacities ranged from 350 to 3450 bars. Based on water fugacity calculations it is concluded that there may have been one or more shallow magma chambers in the Mineral Range at depths of about 1.6 km. Title: Petrology of the Quaternary Volcanics of the Roosevelt KGRA, and Adjoining Area, Utah. Final Report, Volume 1 Author: Nash, W.P. Year: 1976 The Roosevelt KGRA (Known Geothermal Resource Area) located near Milford, Utah, is associated with a suite of quaternary silicic volcanics distributed for 15 km along the crest and western flank of the Mineral Mountains, a large tertiary granite batholith. The volcanics are high-silica rhyolites and occur as domes, flows and tuffs. Initial eruptions resulted in two flows of low viscosity, phenocryst-poor rhyolite. Later activity consisted of pyroclastic eruptions and the emplacement of at least 9 viscous domes. In addition to abundant glass the rhyolites contain alkali feldspar, plagioclase, biotite, iron-titanium oxides and small amounts of hornblende, allanite, apatite, zircon, sphene and topaz. Magmatic temperatures were about 700C and water fugacities ranged from 350 to 3450 bars. Based on water fugacity calculations it is concluded that there may have been one or more shallow magma chambers in the Mineral Range at depths of about 1.6 km. Close