Search

Search Results

• 11. [Article] Perspectives on Climate Change, Mountain Hydrology, and Water Resources in the Oregon Cascades, USA

  This is the publisher’s final pdf. The published article is copyrighted by the International Mountain Society (IMS) and can be found at: http://www.mrd-journal.org/default.asp.

  Citation × Citation Citation Abstract Copy Title: Perspectives on Climate Change, Mountain Hydrology, and Water Resources in the Oregon Cascades, USA Author: Nolin, Anne W. This is the publisher’s final pdf. The published article is copyrighted by the International Mountain Society (IMS) and can be found at: http://www.mrd-journal.org/default.asp. Title: Perspectives on Climate Change, Mountain Hydrology, and Water Resources in the Oregon Cascades, USA Author: Nolin, Anne W. This is the publisher’s final pdf. The published article is copyrighted by the International Mountain Society (IMS) and can be found at: http://www.mrd-journal.org/default.asp. Close

• 12. [Image] DHE (Downhole Heat Exchangers)

  	The use of downhole heat exchangers (DHE) for residential or commercial space and domestic water heating and other applications has several desirable features. Systems are nearly or completely passive ...
  	Citation × Citation Citation Abstract Copy Title: DHE (Downhole Heat Exchangers) Author: Culver, G. Year: 1990 The use of downhole heat exchangers (DHE) for residential or commercial space and domestic water heating and other applications has several desirable features. Systems are nearly or completely passive -- that is, no or very little geothermal water or steam is produced from the well either reducing or completely eliminating surface environmental concerns and the need for disposal systems or injection wells. Initial cost of pumps and installation are eliminated or reduced along with pumping power costs and maintenance costs associated with pumping often corrosive geothermal fluids. Many residential and small commercial systems do not require circulating pumps because the density difference in the incoming and outgoing sides of the loop are sufficient to overcome circulating friction losses in the entire system. The major disadvantage of DHEs is their dependence on natural heat flow. In areas where geological conditions provide high permeability and a natural hydraulic gradient, DHEs can provide a substantial quantity of heat. A single 500-ft (152 m) well in Klamath Falls, Oregon, supplies over one megawatt thermal and output is apparently limited by the surface area of pipe that can be installed in the well bore. In contrast, DHEs used in conjunction with heat pumps may supply less than 8 KW from a well of similar depth. Here output is limited by conductive heat flow with perhaps a small contribution from convection near the well bore. The highest capacity DHE reported to date, in Turkey, supplies 6 MW thermal from an 820-ft (250 m) well. There were two main goals for this project. The first was to gather, disseminate and exchange internationally information on DHEs. The second was to perform experiments that would provide insight into well bore/aquifer interaction and thereby provide more information on which to base DHE designs. 27 refs., 31 figs., 3 tabs. Title: DHE (Downhole Heat Exchangers) Author: Culver, G. Year: 1990 The use of downhole heat exchangers (DHE) for residential or commercial space and domestic water heating and other applications has several desirable features. Systems are nearly or completely passive -- that is, no or very little geothermal water or steam is produced from the well either reducing or completely eliminating surface environmental concerns and the need for disposal systems or injection wells. Initial cost of pumps and installation are eliminated or reduced along with pumping power costs and maintenance costs associated with pumping often corrosive geothermal fluids. Many residential and small commercial systems do not require circulating pumps because the density difference in the incoming and outgoing sides of the loop are sufficient to overcome circulating friction losses in the entire system. The major disadvantage of DHEs is their dependence on natural heat flow. In areas where geological conditions provide high permeability and a natural hydraulic gradient, DHEs can provide a substantial quantity of heat. A single 500-ft (152 m) well in Klamath Falls, Oregon, supplies over one megawatt thermal and output is apparently limited by the surface area of pipe that can be installed in the well bore. In contrast, DHEs used in conjunction with heat pumps may supply less than 8 KW from a well of similar depth. Here output is limited by conductive heat flow with perhaps a small contribution from convection near the well bore. The highest capacity DHE reported to date, in Turkey, supplies 6 MW thermal from an 820-ft (250 m) well. There were two main goals for this project. The first was to gather, disseminate and exchange internationally information on DHEs. The second was to perform experiments that would provide insight into well bore/aquifer interaction and thereby provide more information on which to base DHE designs. 27 refs., 31 figs., 3 tabs. Close

• 13. [Image] Thermal springs list for the United States; National Oceanic and Atmospheric Administration Key to Geophysical Records Documentation No. 12

  	The compilation has 1702 thermal spring locations in 23 of the 50 States, arranged alphabetically by State (Postal Service abbreviation) and degrees of latitude and longitude within the State. It shows ...
  	Citation × Citation Citation Abstract Copy Title: Thermal springs list for the United States; National Oceanic and Atmospheric Administration Key to Geophysical Records Documentation No. 12 Author: Berry, G.W. Year: 1980 The compilation has 1702 thermal spring locations in 23 of the 50 States, arranged alphabetically by State (Postal Service abbreviation) and degrees of latitude and longitude within the State. It shows spring name, surface temperature in degrees Fahrenheit and degrees Celsius; USGS Professional Paper 492 number, USGS Circular 790 number, NOAA number, north to south on each degree of latitude and longitude of the listed. USGS 1:250,000-scale (AMS) map; and the USGS topographic map coverage, 1:63360- or 1:62500-scale (15-minute) or 1:24000-scale (7.5-minute) quadrangle also included is an alphabetized list showing only the spring name and the State in which it is located. Unnamed springs are omitted. The list includes natural surface hydrothermal features: springs, pools, mud pots, mud volcanoes, geysers, fumaroles, and steam vents at temperature of 20{sup 0}C (68[sup 0}F) or greater. It does not include wells or mines, except at sites where they supplement or replace natural vents presently or recently active, or, in some places, where orifices are not distinguishable as natural or artificial. The listed springs are located on the USGS 1:250,000 (AMS) topographic maps. (MHR) Title: Thermal springs list for the United States; National Oceanic and Atmospheric Administration Key to Geophysical Records Documentation No. 12 Author: Berry, G.W. Year: 1980 The compilation has 1702 thermal spring locations in 23 of the 50 States, arranged alphabetically by State (Postal Service abbreviation) and degrees of latitude and longitude within the State. It shows spring name, surface temperature in degrees Fahrenheit and degrees Celsius; USGS Professional Paper 492 number, USGS Circular 790 number, NOAA number, north to south on each degree of latitude and longitude of the listed. USGS 1:250,000-scale (AMS) map; and the USGS topographic map coverage, 1:63360- or 1:62500-scale (15-minute) or 1:24000-scale (7.5-minute) quadrangle also included is an alphabetized list showing only the spring name and the State in which it is located. Unnamed springs are omitted. The list includes natural surface hydrothermal features: springs, pools, mud pots, mud volcanoes, geysers, fumaroles, and steam vents at temperature of 20{sup 0}C (68[sup 0}F) or greater. It does not include wells or mines, except at sites where they supplement or replace natural vents presently or recently active, or, in some places, where orifices are not distinguishable as natural or artificial. The listed springs are located on the USGS 1:250,000 (AMS) topographic maps. (MHR) Close

• 14. [Image] Dipole-Dipole Resistivity Surveys, Roosevelt Hot Springs KGRA. Final Report, Volume 2

  	Dipole-dipole Resistivity surveys were conducted at Roosevelt Hot Springs KGRA. Three different dipole spacings were used; 99km of traverse line were surveyed with 100m dipoles, 50km with 300m dipoles, ...
  	Citation × Citation Citation Abstract Copy Title: Dipole-Dipole Resistivity Surveys, Roosevelt Hot Springs KGRA. Final Report, Volume 2 Author: Ward, S.H. Year: 1976 Dipole-dipole Resistivity surveys were conducted at Roosevelt Hot Springs KGRA. Three different dipole spacings were used; 99km of traverse line were surveyed with 100m dipoles, 50km with 300m dipoles, and 44km with 1km dipoles. The objectives of the Resistivity surveying were to detect and delineate regions of low Resistivity associated with fracturing, brines, high temperatures, and clay alteration. The Resistivity of rocks that are typical of hydrothermal environments is due to two main conduction mechanisms: (1) electrolytic conduction through pores and fractures; and (2) surface conduction due to a thin zone of cations attracted to those mineral surfaces with net negative charges (especially clay minerals). For saturated rocks, the Resistivity due to electrolytic conduction is a function of the effective porosity of the fractured rock, of the temperature, and of the salinity of the fluid filling the pores and fractures. The Resistivity decreases as the effective porosity, water saturation, salinity, and temperature increase. The presence of clay minerals and pyrite will also decrease the Resistivity Title: Dipole-Dipole Resistivity Surveys, Roosevelt Hot Springs KGRA. Final Report, Volume 2 Author: Ward, S.H. Year: 1976 Dipole-dipole Resistivity surveys were conducted at Roosevelt Hot Springs KGRA. Three different dipole spacings were used; 99km of traverse line were surveyed with 100m dipoles, 50km with 300m dipoles, and 44km with 1km dipoles. The objectives of the Resistivity surveying were to detect and delineate regions of low Resistivity associated with fracturing, brines, high temperatures, and clay alteration. The Resistivity of rocks that are typical of hydrothermal environments is due to two main conduction mechanisms: (1) electrolytic conduction through pores and fractures; and (2) surface conduction due to a thin zone of cations attracted to those mineral surfaces with net negative charges (especially clay minerals). For saturated rocks, the Resistivity due to electrolytic conduction is a function of the effective porosity of the fractured rock, of the temperature, and of the salinity of the fluid filling the pores and fractures. The Resistivity decreases as the effective porosity, water saturation, salinity, and temperature increase. The presence of clay minerals and pyrite will also decrease the Resistivity Close

• 15. [Image] The Cody Hydrothermal System

  	The hot springs of Colter's Hell are the surface manifestations of a much larger hydrothermal system. That system has been studied to define its extent, maximum temperature, and mechanism of operation. ...
  	Citation × Citation Citation Abstract Copy Title: The Cody Hydrothermal System Author: Heasler, H.P. Year: 1982 The hot springs of Colter's Hell are the surface manifestations of a much larger hydrothermal system. That system has been studied to define its extent, maximum temperature, and mechanism of operation. The study area covers 2700 km/sup 2/ (1040 mi/sup 2/) in northwest Wyoming. Research and field work included locating and sampling the hot springs, geologic mapping, thermal logging of available wells, measuring thermal conductivities, analyzing over 200 oil and gas well bottom-hole temperatures, and compiling and analyzing hydrologic data. These data were used to generate a model for the hydrothermal system Title: The Cody Hydrothermal System Author: Heasler, H.P. Year: 1982 The hot springs of Colter's Hell are the surface manifestations of a much larger hydrothermal system. That system has been studied to define its extent, maximum temperature, and mechanism of operation. The study area covers 2700 km/sup 2/ (1040 mi/sup 2/) in northwest Wyoming. Research and field work included locating and sampling the hot springs, geologic mapping, thermal logging of available wells, measuring thermal conductivities, analyzing over 200 oil and gas well bottom-hole temperatures, and compiling and analyzing hydrologic data. These data were used to generate a model for the hydrothermal system Close

• 16. [Image] Dipole-Dipole Resistivity Survey of a Portion of the Coso Hot Springs KGRA, Inyo County, California

  	A detailed electrical resistivity survey of 54 line-km was completed at the Coso Hot Springs KGRA in September 1977. This survey has defined a bedrock resistivity low at least 4 sq mi (10 sq km) in extent ...
  	Citation × Citation Citation Abstract Copy Title: Dipole-Dipole Resistivity Survey of a Portion of the Coso Hot Springs KGRA, Inyo County, California Author: Fox, R.C. Year: 1978 A detailed electrical resistivity survey of 54 line-km was completed at the Coso Hot Springs KGRA in September 1977. This survey has defined a bedrock resistivity low at least 4 sq mi (10 sq km) in extent associated with the geothermal system at Coso. The boundaries of this low are generally well defined to the north and west but not as well to the south where an approximate southern limit has been determined. The bedrock resistivity low merges with an observed resistivity low over gravel fill east of Coso Hot Springs. A complex horizontal and vertical resistivity structure of the surveyed area has been defined which precludes the use of layered-earth or two-dimensional interpretive models for much of the surveyed area. In general the survey data indicate that a 10 to 20 ohm-meter zone extends from near surface to a depth greater than 750 meters within the geothermal system. This zone is bordered to the north and west by bedrock resistivities greater than 200 ohm-meters and to the south by bedrock resistivities greater than 50 ohm-meters. A combination of observed increases in: (1) fracture density (higher permeability), (2) alteration (high clay content), and (3) temperatures (higher dissolved solid content of ground water) within the bedrock low explain its presence Title: Dipole-Dipole Resistivity Survey of a Portion of the Coso Hot Springs KGRA, Inyo County, California Author: Fox, R.C. Year: 1978 A detailed electrical resistivity survey of 54 line-km was completed at the Coso Hot Springs KGRA in September 1977. This survey has defined a bedrock resistivity low at least 4 sq mi (10 sq km) in extent associated with the geothermal system at Coso. The boundaries of this low are generally well defined to the north and west but not as well to the south where an approximate southern limit has been determined. The bedrock resistivity low merges with an observed resistivity low over gravel fill east of Coso Hot Springs. A complex horizontal and vertical resistivity structure of the surveyed area has been defined which precludes the use of layered-earth or two-dimensional interpretive models for much of the surveyed area. In general the survey data indicate that a 10 to 20 ohm-meter zone extends from near surface to a depth greater than 750 meters within the geothermal system. This zone is bordered to the north and west by bedrock resistivities greater than 200 ohm-meters and to the south by bedrock resistivities greater than 50 ohm-meters. A combination of observed increases in: (1) fracture density (higher permeability), (2) alteration (high clay content), and (3) temperatures (higher dissolved solid content of ground water) within the bedrock low explain its presence Close

• 17. [Image] Initial Investigation of Soil Mercury Geochemistry as an Aid to Drill Site Selection in Geothermal Systems

  	A mercury-in-soil survey was conducted at the Roosevelt Hot Springs Known Geothermal Resource Area (KGRA), Utah, to evaluate mercury soil geochemistry as a method of selecting exploration well sites in ...
  	Citation × Citation Citation Abstract Copy Title: Initial Investigation of Soil Mercury Geochemistry as an Aid to Drill Site Selection in Geothermal Systems Author: Capuano, R.M. Year: 1978 A mercury-in-soil survey was conducted at the Roosevelt Hot Springs Known Geothermal Resource Area (KGRA), Utah, to evaluate mercury soil geochemistry as a method of selecting exploration well sites in a hot-water geothermal system. Samples of -80 mesh soil were collected at 30.5 m intervals along traverses crossing known structures, surficial geothermal alteration, and exploration well sites, and were analyzed using a Gold Film Mercury Detector. Strong mercury anomalies occur at locations along known structures in close proximity to subsurface thermal activity; examples include areas over hot spring deposits and near a shallow producing well. In contrast, background mercury concentrations are present in nearby locations with little or no indication of subsurface thermal activity, such as areas around deep marginal producing wells and dry wells, and areas lacking hot spring deposits. These results indicate that mercury geochemical surveys can be useful for identifying and mapping structures controlling fluid flow in geothermal systems and for delineating areas overlying near-surface thermal activity. Soil mercury geochemistry thus provides information which may aid in the cost-effective selection of exploratory well sites Title: Initial Investigation of Soil Mercury Geochemistry as an Aid to Drill Site Selection in Geothermal Systems Author: Capuano, R.M. Year: 1978 A mercury-in-soil survey was conducted at the Roosevelt Hot Springs Known Geothermal Resource Area (KGRA), Utah, to evaluate mercury soil geochemistry as a method of selecting exploration well sites in a hot-water geothermal system. Samples of -80 mesh soil were collected at 30.5 m intervals along traverses crossing known structures, surficial geothermal alteration, and exploration well sites, and were analyzed using a Gold Film Mercury Detector. Strong mercury anomalies occur at locations along known structures in close proximity to subsurface thermal activity; examples include areas over hot spring deposits and near a shallow producing well. In contrast, background mercury concentrations are present in nearby locations with little or no indication of subsurface thermal activity, such as areas around deep marginal producing wells and dry wells, and areas lacking hot spring deposits. These results indicate that mercury geochemical surveys can be useful for identifying and mapping structures controlling fluid flow in geothermal systems and for delineating areas overlying near-surface thermal activity. Soil mercury geochemistry thus provides information which may aid in the cost-effective selection of exploratory well sites Close

• 18. [Image] Evaluation and Targeting of Geothermal Energy Resources in the Southeastern United States. Progress Report, May 1, 1976--October 31, 1976

  	Progress is reported in the development of procedures for the evaluation of low-temperature radiogenically-derived geothermal resources in the eastern United States utilizing geological geochemical, and ...
  	Citation × Citation Citation Abstract Copy Title: Evaluation and Targeting of Geothermal Energy Resources in the Southeastern United States. Progress Report, May 1, 1976--October 31, 1976 Author: Costain, J.K. Year: 1976 Progress is reported in the development of procedures for the evaluation of low-temperature radiogenically-derived geothermal resources in the eastern United States utilizing geological geochemical, and geophysical data. An optimum site for geothermal development in the tectonically stable eastern United States will probably be associated with crustal igneous rocks containing relatively high concentrations of radiogenic heat-producing elements buried beneath an insulating blanket of sediments of low thermal conductivity. Evaluation of plutonic rocks exposed in the Piedmont will aid in the interpretation of gravity and magnetic data for the Atlantic Coastal Plain. Initial results of determination of heat generation from surface samples in South Caroline are encouraging, especially if granitic igneous rocks of similar heat generation can be found beneath sedimentary insulation. Continues logging of existing wells in Coastal Plain sediments supports earlier conclusion that these sediments do behave as efficient sedimentary insulators. Higher temperatures appear to be reached at shallower depths for wells drilled in Coastal Plain sediments in the vicinity of the Georgetown, South Carolina gravity law. Detailed structural mapping in the vicinity of the warm springs in northwestern Virginia has confirmed structural control of the warm springs, and has revealed the existence of kink bands. The kink bands could be related to the development of zones of vertical permeability which serve as conduits in sedimentary rocks for ascending hot water. Title: Evaluation and Targeting of Geothermal Energy Resources in the Southeastern United States. Progress Report, May 1, 1976--October 31, 1976 Author: Costain, J.K. Year: 1976 Progress is reported in the development of procedures for the evaluation of low-temperature radiogenically-derived geothermal resources in the eastern United States utilizing geological geochemical, and geophysical data. An optimum site for geothermal development in the tectonically stable eastern United States will probably be associated with crustal igneous rocks containing relatively high concentrations of radiogenic heat-producing elements buried beneath an insulating blanket of sediments of low thermal conductivity. Evaluation of plutonic rocks exposed in the Piedmont will aid in the interpretation of gravity and magnetic data for the Atlantic Coastal Plain. Initial results of determination of heat generation from surface samples in South Caroline are encouraging, especially if granitic igneous rocks of similar heat generation can be found beneath sedimentary insulation. Continues logging of existing wells in Coastal Plain sediments supports earlier conclusion that these sediments do behave as efficient sedimentary insulators. Higher temperatures appear to be reached at shallower depths for wells drilled in Coastal Plain sediments in the vicinity of the Georgetown, South Carolina gravity law. Detailed structural mapping in the vicinity of the warm springs in northwestern Virginia has confirmed structural control of the warm springs, and has revealed the existence of kink bands. The kink bands could be related to the development of zones of vertical permeability which serve as conduits in sedimentary rocks for ascending hot water. Close