Search

Search Results

• 1. [Image] Wyoming Geothermal Commercialization Program; area development plans: Fremont County, Big Horn Basin, Converse and Natrona Counties, Wyoming

  	Three papers are included. A separate abstract was prepared for each one. (MHR); DOE/ID/12013-3
  	Citation × Citation Citation Abstract Copy Title: Wyoming Geothermal Commercialization Program; area development plans: Fremont County, Big Horn Basin, Converse and Natrona Counties, Wyoming Author: United States. Dept. of Energy. Idaho Operations Office. Year: 1980 Three papers are included. A separate abstract was prepared for each one. (MHR); DOE/ID/12013-3 Title: Wyoming Geothermal Commercialization Program; area development plans: Fremont County, Big Horn Basin, Converse and Natrona Counties, Wyoming Author: United States. Dept. of Energy. Idaho Operations Office. Year: 1980 Three papers are included. A separate abstract was prepared for each one. (MHR); DOE/ID/12013-3 Close

• 2. [Image] Gravity Survey of the Cove Fort-Sulphurdale KGRA and the North Mineral Mountains area, Millard and Beaver Counties, Utah

  	During the summers of 1975 and 1976, a gravity survey was conducted in the Cove Fort-Sulphurdale KGRA and north Mineral Mountains area, Millard and Beaver Counties, Utah. The survey consisted of 671 gravity ...
  	Citation × Citation Citation Abstract Copy Title: Gravity Survey of the Cove Fort-Sulphurdale KGRA and the North Mineral Mountains area, Millard and Beaver Counties, Utah Author: Brumbaugh, W.D. Year: 1977 During the summers of 1975 and 1976, a gravity survey was conducted in the Cove Fort-Sulphurdale KGRA and north Mineral Mountains area, Millard and Beaver Counties, Utah. The survey consisted of 671 gravity stations covering an area of about 1300 km{sup 2}, and included two orthogonal gravity profiles traversing the area. The gravity data are presented as a terrain-corrected Bouguer gravity anomaly map with a contour interval of 1 mgal and as an isometric three-dimensional gravity anomaly surface. Selected anomaly separation techniques were applied to the hand-digitized gravity data (at 1-km intervals on the Universal Transverse Mercator grid) in both the frequency and space domains, including Fourier decomposition, second vertical derivative, strike-filter, and polynomial fitting analysis, respectively Title: Gravity Survey of the Cove Fort-Sulphurdale KGRA and the North Mineral Mountains area, Millard and Beaver Counties, Utah Author: Brumbaugh, W.D. Year: 1977 During the summers of 1975 and 1976, a gravity survey was conducted in the Cove Fort-Sulphurdale KGRA and north Mineral Mountains area, Millard and Beaver Counties, Utah. The survey consisted of 671 gravity stations covering an area of about 1300 km{sup 2}, and included two orthogonal gravity profiles traversing the area. The gravity data are presented as a terrain-corrected Bouguer gravity anomaly map with a contour interval of 1 mgal and as an isometric three-dimensional gravity anomaly surface. Selected anomaly separation techniques were applied to the hand-digitized gravity data (at 1-km intervals on the Universal Transverse Mercator grid) in both the frequency and space domains, including Fourier decomposition, second vertical derivative, strike-filter, and polynomial fitting analysis, respectively Close

• 3. [Image] Geology of the Beowawe geothermal system, Eureka and Lander Counties, Nevada

  	A geologic study is described undertaken to evaluate the nature of structural and stratigraphic controls within the Beowawe geothermal system, Eureka and Lander Counties, Nevada. This study includes geologic ...
  	Citation × Citation Citation Abstract Copy Title: Geology of the Beowawe geothermal system, Eureka and Lander Counties, Nevada Author: Struhsacker, E.M. Year: 1980 A geologic study is described undertaken to evaluate the nature of structural and stratigraphic controls within the Beowawe geothermal system, Eureka and Lander Counties, Nevada. This study includes geologic mapping at a scale of 1:24,000 and lithologic logs of deep Chevron wells. Two major normal fault systems control the configuration of the Beowawe geothermal system. Active hot springs and sinter deposits lie along the Malpais Fault zone at the base of the Malpais Rim. The Malpais Rim is one of several east-northeast-striking, fault-bounded cuestas in north central Nevada. A steeply inclined scarp slope faces northwest towards Whirlwind Valley. The general inclination of the volcanic rocks on the Malpais dip slope is 5/sup 0/ to 10/sup 0/ southeast; DOE/ID/12079-T1; ESL-37 Title: Geology of the Beowawe geothermal system, Eureka and Lander Counties, Nevada Author: Struhsacker, E.M. Year: 1980 A geologic study is described undertaken to evaluate the nature of structural and stratigraphic controls within the Beowawe geothermal system, Eureka and Lander Counties, Nevada. This study includes geologic mapping at a scale of 1:24,000 and lithologic logs of deep Chevron wells. Two major normal fault systems control the configuration of the Beowawe geothermal system. Active hot springs and sinter deposits lie along the Malpais Fault zone at the base of the Malpais Rim. The Malpais Rim is one of several east-northeast-striking, fault-bounded cuestas in north central Nevada. A steeply inclined scarp slope faces northwest towards Whirlwind Valley. The general inclination of the volcanic rocks on the Malpais dip slope is 5/sup 0/ to 10/sup 0/ southeast; DOE/ID/12079-T1; ESL-37 Close

• 4. [Image] Interpretation of a dipole-dipole electrical resistivity survey, Colado geothermal area, Pershing County, Nevada

  	An electrical resistivity survey in the Colado geothermal area, Pershing County, Nevada has defined areas of low resistivity on each of five lines surveyed. Some of these areas appear to be fault controlled. ...
  	Citation × Citation Citation Abstract Copy Title: Interpretation of a dipole-dipole electrical resistivity survey, Colado geothermal area, Pershing County, Nevada Author: Mackelprang, C.E. Year: 1980 An electrical resistivity survey in the Colado geothermal area, Pershing County, Nevada has defined areas of low resistivity on each of five lines surveyed. Some of these areas appear to be fault controlled. Thermal fluids encountered in several drill holes support the assumption that the hot fluids may be associated with areas of low resistivity. The evidence of faulting as interpreted from modeling of the observed resistivity data is therefore particularly significant since these structures may be the conduits for the thermal fluids. Sub-allurial fault zones are interpreted to occur between stations 0 to 5 NW on Line D and on Line A between stations 4 NW and 4 SE. Fault zones are also interpreted on Line C near stations 1 NW, 1 SE, and 3 SE, and on Line E between stations 2 to 4 NW and near 1 SE. No faulting is evident under the alluvial cover on the southwest end of Line B. A deep conductive zone is noted within the mountain range on two resistivity lines. There is no definite indication that thermal fluids are associated with this resistivity feature; DOE/ID/12079-11; ESL-41 Title: Interpretation of a dipole-dipole electrical resistivity survey, Colado geothermal area, Pershing County, Nevada Author: Mackelprang, C.E. Year: 1980 An electrical resistivity survey in the Colado geothermal area, Pershing County, Nevada has defined areas of low resistivity on each of five lines surveyed. Some of these areas appear to be fault controlled. Thermal fluids encountered in several drill holes support the assumption that the hot fluids may be associated with areas of low resistivity. The evidence of faulting as interpreted from modeling of the observed resistivity data is therefore particularly significant since these structures may be the conduits for the thermal fluids. Sub-allurial fault zones are interpreted to occur between stations 0 to 5 NW on Line D and on Line A between stations 4 NW and 4 SE. Fault zones are also interpreted on Line C near stations 1 NW, 1 SE, and 3 SE, and on Line E between stations 2 to 4 NW and near 1 SE. No faulting is evident under the alluvial cover on the southwest end of Line B. A deep conductive zone is noted within the mountain range on two resistivity lines. There is no definite indication that thermal fluids are associated with this resistivity feature; DOE/ID/12079-11; ESL-41 Close

• 5. [Image] Geochemistry of the Colado geothermal area, Pershing County, Nevada

  	Multielement geochemical analysis of drill cuttings from 18 shallow and 2 intermediate-depth temperature gradient holes outlines an area of anomalous geochemistry related to the fluid flow and temperature ...
  	Citation × Citation Citation Abstract Copy Title: Geochemistry of the Colado geothermal area, Pershing County, Nevada Author: Christensen, O.D. Year: 1980 Multielement geochemical analysis of drill cuttings from 18 shallow and 2 intermediate-depth temperature gradient holes outlines an area of anomalous geochemistry related to the fluid flow and temperature distribution within the Colado geothermal area. The concentrations of Hg, As, Li, and Be belong to more than one statistical population and provide the clearest expression of hydrothermal processes. Enrichments of these four elements define anomalous zones which are spatially coincident with a measured temperature anomaly. The spatial distribution suggests that thermal fluid rises into alluvium in the vicinity of a major Basin and Range fault to depths of 200 to 400 feet (60 to 120 m), then flows laterally within shallow alluvial aquifers down the local hydrologic gradient. As the fluid cools, Li, Be, As, and Hg are deposited in response to changing physical and chemical conditions. As and Be appear to be deposited early in higher temperature zones; Li begins to deposit early but forms a rather dispersed geochemical anomaly; Hg is anomalous throughout the entire geothermal area but is concentrated in a shallow halo above the As and Be anomalies. The distributions suggest that the entry of thermal fluids from depth into the alluvium is spatially restricted to a small area and that the larger area of the observed thermal anomaly is due to the flow of warm fluid within shallow aquifers; DOE/ID/12079-9; ESL-39 Title: Geochemistry of the Colado geothermal area, Pershing County, Nevada Author: Christensen, O.D. Year: 1980 Multielement geochemical analysis of drill cuttings from 18 shallow and 2 intermediate-depth temperature gradient holes outlines an area of anomalous geochemistry related to the fluid flow and temperature distribution within the Colado geothermal area. The concentrations of Hg, As, Li, and Be belong to more than one statistical population and provide the clearest expression of hydrothermal processes. Enrichments of these four elements define anomalous zones which are spatially coincident with a measured temperature anomaly. The spatial distribution suggests that thermal fluid rises into alluvium in the vicinity of a major Basin and Range fault to depths of 200 to 400 feet (60 to 120 m), then flows laterally within shallow alluvial aquifers down the local hydrologic gradient. As the fluid cools, Li, Be, As, and Hg are deposited in response to changing physical and chemical conditions. As and Be appear to be deposited early in higher temperature zones; Li begins to deposit early but forms a rather dispersed geochemical anomaly; Hg is anomalous throughout the entire geothermal area but is concentrated in a shallow halo above the As and Be anomalies. The distributions suggest that the entry of thermal fluids from depth into the alluvium is spatially restricted to a small area and that the larger area of the observed thermal anomaly is due to the flow of warm fluid within shallow aquifers; DOE/ID/12079-9; ESL-39 Close

• 6. [Image] Geology of the Colado Geothermal Area, Pershing County, Nevada

  	The Colado geothermal area in south-central Pershing County, Nevada is defined by hot water wells in alluvium just west of the West Humboldt Range. Geothermal gradient holes have encountered temperatures ...
  	Citation × Citation Citation Abstract Copy Title: Geology of the Colado Geothermal Area, Pershing County, Nevada Author: Sibbett, B.S. Year: 1980 The Colado geothermal area in south-central Pershing County, Nevada is defined by hot water wells in alluvium just west of the West Humboldt Range. Geothermal gradient holes have encountered temperatures up to 113.5/sup 0/C at a depth of 76 m (250 ft) with a gradient reversal in the alluvium below this depth. The West Humboldt Range consists mainly of Triassic to Jurassic slaty shale to quartzite of the Auld Lang Syne Group. Carbonate rocks of the Jurassic Lovelock Formation have been thrust over pelitic rocks on the south end of the area. Erosional remnants of Tertiary tuffs and sediments overlay the metasediments in the West Humboldt Range. The principal structures are high-angle faults striking north-northwest, northeast and north-south. The horst-to-graben transition along the range front consists of several step faults trending irregularly north. The structural pattern in the west edge of the range probably continues to the west under the Quaterary alluvium where the source of the hot water is located. Thermal waters probably rise along a major fault intersection in the Mesozoic rocks then spread out in an aquifer in the alluvium. Several thrust faults are exposed south of Coal Canyon, and a structural break in the Mesozoic rock exists under the canyon. Several low-angle faults are present north of Coal Canyon but their effect, if any, on the geothermal occurrence is not known; DOE/ID/12079-8; ESL-38 Title: Geology of the Colado Geothermal Area, Pershing County, Nevada Author: Sibbett, B.S. Year: 1980 The Colado geothermal area in south-central Pershing County, Nevada is defined by hot water wells in alluvium just west of the West Humboldt Range. Geothermal gradient holes have encountered temperatures up to 113.5/sup 0/C at a depth of 76 m (250 ft) with a gradient reversal in the alluvium below this depth. The West Humboldt Range consists mainly of Triassic to Jurassic slaty shale to quartzite of the Auld Lang Syne Group. Carbonate rocks of the Jurassic Lovelock Formation have been thrust over pelitic rocks on the south end of the area. Erosional remnants of Tertiary tuffs and sediments overlay the metasediments in the West Humboldt Range. The principal structures are high-angle faults striking north-northwest, northeast and north-south. The horst-to-graben transition along the range front consists of several step faults trending irregularly north. The structural pattern in the west edge of the range probably continues to the west under the Quaterary alluvium where the source of the hot water is located. Thermal waters probably rise along a major fault intersection in the Mesozoic rocks then spread out in an aquifer in the alluvium. Several thrust faults are exposed south of Coal Canyon, and a structural break in the Mesozoic rock exists under the canyon. Several low-angle faults are present north of Coal Canyon but their effect, if any, on the geothermal occurrence is not known; DOE/ID/12079-8; ESL-38 Close

• 7. [Image] Earthquake Surveys of the Roosevelt Hot Springs and the Cove Fort Areas, Utah: Final: Volume 4

  	Many geothermal areas throughout the world exhibit earthquake activity in the form of swarms (Ward, 1972). Detailed epicenters and characteristics of earthquake swarms can provide Useful information on ...
  	Citation × Citation Citation Abstract Copy Title: Earthquake Surveys of the Roosevelt Hot Springs and the Cove Fort Areas, Utah: Final: Volume 4 Author: Olson, T. L. Year: 1976 Many geothermal areas throughout the world exhibit earthquake activity in the form of swarms (Ward, 1972). Detailed epicenters and characteristics of earthquake swarms can provide Useful information on stress orientation and the possibility of locating fault zones that could provide underground conduits for geothermal fluids. Furthermore potential earthquakes and related hazards which may influence a geothermal reservoir can be better understood from a detailed assessment of local earthquake activity. It was hoped that an earthquake survey of the Roosevelt Hot Springs and Cove Fort areas of southwestern Utah (Figure 1) could provide information about the geothermal potential of this area and the relationship between the earthquakes and the local tectonic patterns Title: Earthquake Surveys of the Roosevelt Hot Springs and the Cove Fort Areas, Utah: Final: Volume 4 Author: Olson, T. L. Year: 1976 Many geothermal areas throughout the world exhibit earthquake activity in the form of swarms (Ward, 1972). Detailed epicenters and characteristics of earthquake swarms can provide Useful information on stress orientation and the possibility of locating fault zones that could provide underground conduits for geothermal fluids. Furthermore potential earthquakes and related hazards which may influence a geothermal reservoir can be better understood from a detailed assessment of local earthquake activity. It was hoped that an earthquake survey of the Roosevelt Hot Springs and Cove Fort areas of southwestern Utah (Figure 1) could provide information about the geothermal potential of this area and the relationship between the earthquakes and the local tectonic patterns Close

• 8. [Image] Proceedings of the Seminar on Geothermal Energy, October 18-19, 1977, Hilo, Hawaii

  	Ten papers are included. Each was abstracted and indexed individually for EDB/ERA. Seven of the papers are included in Energy Abstracts for Policy Analysis (EAPA). (JGB)
  	Citation × Citation Citation Abstract Copy Title: Proceedings of the Seminar on Geothermal Energy, October 18-19, 1977, Hilo, Hawaii Author: Hawaii County Department of Research and Development Year: 1977 Ten papers are included. Each was abstracted and indexed individually for EDB/ERA. Seven of the papers are included in Energy Abstracts for Policy Analysis (EAPA). (JGB) Title: Proceedings of the Seminar on Geothermal Energy, October 18-19, 1977, Hilo, Hawaii Author: Hawaii County Department of Research and Development Year: 1977 Ten papers are included. Each was abstracted and indexed individually for EDB/ERA. Seven of the papers are included in Energy Abstracts for Policy Analysis (EAPA). (JGB) Close

• 9. [Image] Gravity and Ground Magnetic Surveys of the Central Mineral Mountains, Utah. Volume 6: Final Report

  	During the summers of 1974 and 1975, gravity and ground magnetic surveys were made over the central part of the Mineral Mountains and vicinity, Utah. The gravity survey comprised 627 gravity stations over ...
  	Citation × Citation Citation Abstract Copy Title: Gravity and Ground Magnetic Surveys of the Central Mineral Mountains, Utah. Volume 6: Final Report Author: Crebs, T.J. Year: 1976 During the summers of 1974 and 1975, gravity and ground magnetic surveys were made over the central part of the Mineral Mountains and vicinity, Utah. The gravity survey comprised 627 gravity stations over an area of approximately 660 sq km, and included 8 gravity profiles over the Roosevelt Hot Springs KGRA. The magnetic survey comprised over 400 magnetic stations within 4 magnetic profiles. The gravity data were compiled as a terrain-corrected Bouguer gravity anomaly map with a contour interval of 2 mgal. The gravity features include: (1) generally northward-trending gravity contours with gradients along the margins of the Mineral Range, indicating that the range is a horst bounded on the east and west by the Beaver and Milford valley grabens, respectively, where the Milford Valley graben shows pronounced gravity low, which indicates a valley-fill thickness of about 1.8km; and (2) a northward-trending gravity high extends along the western flank of the Mineral Range (probably caused by high-density metamorphic rocks) Title: Gravity and Ground Magnetic Surveys of the Central Mineral Mountains, Utah. Volume 6: Final Report Author: Crebs, T.J. Year: 1976 During the summers of 1974 and 1975, gravity and ground magnetic surveys were made over the central part of the Mineral Mountains and vicinity, Utah. The gravity survey comprised 627 gravity stations over an area of approximately 660 sq km, and included 8 gravity profiles over the Roosevelt Hot Springs KGRA. The magnetic survey comprised over 400 magnetic stations within 4 magnetic profiles. The gravity data were compiled as a terrain-corrected Bouguer gravity anomaly map with a contour interval of 2 mgal. The gravity features include: (1) generally northward-trending gravity contours with gradients along the margins of the Mineral Range, indicating that the range is a horst bounded on the east and west by the Beaver and Milford valley grabens, respectively, where the Milford Valley graben shows pronounced gravity low, which indicates a valley-fill thickness of about 1.8km; and (2) a northward-trending gravity high extends along the western flank of the Mineral Range (probably caused by high-density metamorphic rocks) Close

• 10. [Image] Dipole-Dipole Resistivity Survey of a Portion of the Coso Hot Springs KGRA, Inyo County, California

  	A detailed electrical resistivity survey of 54 line-km was completed at the Coso Hot Springs KGRA in September 1977. This survey has defined a bedrock resistivity low at least 4 sq mi (10 sq km) in extent ...
  	Citation × Citation Citation Abstract Copy Title: Dipole-Dipole Resistivity Survey of a Portion of the Coso Hot Springs KGRA, Inyo County, California Author: Fox, R.C. Year: 1978 A detailed electrical resistivity survey of 54 line-km was completed at the Coso Hot Springs KGRA in September 1977. This survey has defined a bedrock resistivity low at least 4 sq mi (10 sq km) in extent associated with the geothermal system at Coso. The boundaries of this low are generally well defined to the north and west but not as well to the south where an approximate southern limit has been determined. The bedrock resistivity low merges with an observed resistivity low over gravel fill east of Coso Hot Springs. A complex horizontal and vertical resistivity structure of the surveyed area has been defined which precludes the use of layered-earth or two-dimensional interpretive models for much of the surveyed area. In general the survey data indicate that a 10 to 20 ohm-meter zone extends from near surface to a depth greater than 750 meters within the geothermal system. This zone is bordered to the north and west by bedrock resistivities greater than 200 ohm-meters and to the south by bedrock resistivities greater than 50 ohm-meters. A combination of observed increases in: (1) fracture density (higher permeability), (2) alteration (high clay content), and (3) temperatures (higher dissolved solid content of ground water) within the bedrock low explain its presence Title: Dipole-Dipole Resistivity Survey of a Portion of the Coso Hot Springs KGRA, Inyo County, California Author: Fox, R.C. Year: 1978 A detailed electrical resistivity survey of 54 line-km was completed at the Coso Hot Springs KGRA in September 1977. This survey has defined a bedrock resistivity low at least 4 sq mi (10 sq km) in extent associated with the geothermal system at Coso. The boundaries of this low are generally well defined to the north and west but not as well to the south where an approximate southern limit has been determined. The bedrock resistivity low merges with an observed resistivity low over gravel fill east of Coso Hot Springs. A complex horizontal and vertical resistivity structure of the surveyed area has been defined which precludes the use of layered-earth or two-dimensional interpretive models for much of the surveyed area. In general the survey data indicate that a 10 to 20 ohm-meter zone extends from near surface to a depth greater than 750 meters within the geothermal system. This zone is bordered to the north and west by bedrock resistivities greater than 200 ohm-meters and to the south by bedrock resistivities greater than 50 ohm-meters. A combination of observed increases in: (1) fracture density (higher permeability), (2) alteration (high clay content), and (3) temperatures (higher dissolved solid content of ground water) within the bedrock low explain its presence Close