Search

Search Results

• 1. [Article] Exploiting New Data Sources to Quantify Arterial Congestion and Performance Measures at a Regional Scale

  Transit travel time, operating speed and reliability all influence service attractiveness, operating cost and system efficiency. These metrics have a long-term impact on system effectiveness through a ...

  Citation × Citation Citation Abstract Copy Title: Exploiting New Data Sources to Quantify Arterial Congestion and Performance Measures at a Regional Scale Author: Figliozzi, Miguel, Bertini, Robert L., Glick, Travis B, Stoll, Nicholas B, Feng, Wei, Sidhu, Bobjot S., Pande, Anurag Year: 2017 Transit travel time, operating speed and reliability all influence service attractiveness, operating cost and system efficiency. These metrics have a long-term impact on system effectiveness through a change in ridership. As part of its bus dispatch system (BDS), the Tri-County Metropolitan Transportation District of Oregon (TriMet) has been archiving automatic vehicle location (AVL) and automatic passenger count (APC) data for all bus trips at the stop level since 1997. In 2014, a new and higher-resolution bus AVL data collection system was fully implemented. This new AVL system provides stop-level data as well as five-second resolution (5-SR) bus position data between stops. Rather than relying on interpolation tools to estimate bus trajectories (including stops and delays) between stops, the higher-resolution data shows more precise bus positions along each trip. Bus travel speeds and intersection signal/queuing delays may be determined using this newer information of several variables on transit travel time. This research project explored potential applications of the new data for assessing transit performance, and for estimating transportation system performance measures for urban streets and arterials. Results suggest that the 5-SR data provides high-resolution time and position information which can be used to determine bus travel speeds between stops, identify speed breakdowns, and estimate intersection signal/queuing delays. Additionally, high-resolution achieved bus data can be used to visualize sources of congestion and delay on urban arterials. A new inter-stop trip time model was developed using the five-second resolution data. This newly developed model resulted in statistically significant and improved results over previous models. The models for overall travel time indicated that dwell time and average speed between stops were the major factors influencing transit travel time. Hence, it was concluded that estimation of average speed between stops is a critical component of the transit trip time models. Using this 5-SR data in the trip time model led to more precise and statistically valid trip time models. The research provides conclusions that can be used by transit agencies to improve operations through improvements such as transit signal priority. More importantly, for transit agencies looking for ways to archive data the research provides recommendations on formatting the data that can be most useful for future analysis. Title: Exploiting New Data Sources to Quantify Arterial Congestion and Performance Measures at a Regional Scale Author: Figliozzi, Miguel, Bertini, Robert L., Glick, Travis B, Stoll, Nicholas B, Feng, Wei, Sidhu, Bobjot S., Pande, Anurag Year: 2017 Transit travel time, operating speed and reliability all influence service attractiveness, operating cost and system efficiency. These metrics have a long-term impact on system effectiveness through a change in ridership. As part of its bus dispatch system (BDS), the Tri-County Metropolitan Transportation District of Oregon (TriMet) has been archiving automatic vehicle location (AVL) and automatic passenger count (APC) data for all bus trips at the stop level since 1997. In 2014, a new and higher-resolution bus AVL data collection system was fully implemented. This new AVL system provides stop-level data as well as five-second resolution (5-SR) bus position data between stops. Rather than relying on interpolation tools to estimate bus trajectories (including stops and delays) between stops, the higher-resolution data shows more precise bus positions along each trip. Bus travel speeds and intersection signal/queuing delays may be determined using this newer information of several variables on transit travel time. This research project explored potential applications of the new data for assessing transit performance, and for estimating transportation system performance measures for urban streets and arterials. Results suggest that the 5-SR data provides high-resolution time and position information which can be used to determine bus travel speeds between stops, identify speed breakdowns, and estimate intersection signal/queuing delays. Additionally, high-resolution achieved bus data can be used to visualize sources of congestion and delay on urban arterials. A new inter-stop trip time model was developed using the five-second resolution data. This newly developed model resulted in statistically significant and improved results over previous models. The models for overall travel time indicated that dwell time and average speed between stops were the major factors influencing transit travel time. Hence, it was concluded that estimation of average speed between stops is a critical component of the transit trip time models. Using this 5-SR data in the trip time model led to more precise and statistically valid trip time models. The research provides conclusions that can be used by transit agencies to improve operations through improvements such as transit signal priority. More importantly, for transit agencies looking for ways to archive data the research provides recommendations on formatting the data that can be most useful for future analysis. Close

• 2. [Article] Multimodal Data at Signalized Intersections: Strategies for Archiving Existing and New Data Streams to Support Operations and Planning & Fusion and Integration of Arterial Performance Data

  There is a growing interest in arterial system management due to the increasing amount of travel on arterials and a growing emphasis on multimodal transportation. The benefits of archiving arterial-related ...

  Citation × Citation Citation Abstract Copy Title: Multimodal Data at Signalized Intersections: Strategies for Archiving Existing and New Data Streams to Support Operations and Planning & Fusion and Integration of Arterial Performance Data Author: Tufte, Kristin A., Monsere, Christopher M., Kothuri, Sirisha Murthy, Olson, Carl Scott Year: 2013 There is a growing interest in arterial system management due to the increasing amount of travel on arterials and a growing emphasis on multimodal transportation. The benefits of archiving arterial-related data are numerous. This research report describes our efforts to assemble and develop a multimodal archive for the Portland-Vancouver region. There is coverage of data sources from all modes in the metropolitan region; however, the preliminary nature of the archiving process means that some of the data are incomplete and samples. The arterial data sources available in the Portland-Vancouver region and that are covered in this report include data for various local agencies (City of Portland, Clark County, WA, TriMet and C-TRAN) covering vehicle, transit, pedestrian, and bicycle modes. We provide detailed descriptions of each data source and a spatial and temporal classification. The report describes the conceptual framework for an archive and the data collection and archival process, including the process for extracting the data from the agency systems and transferring these data to our multimodal database. Data can be made more useful though the use of improved visualization techniques. Thus as part of the project, a number of novel, online visualizations were created and implemented. These graphs and displays are summarized in this report and example visualizations are shown. As with any automated sensor system, data quality and completeness is an important issue and the challenge of automating data quality is large. Preliminary efforts to validate and monitor data quality and automate data quality processing are explored. Finally, the report presents efforts to combine transit and travel time data and signal timing and vehicle count data to generate some sample congestion measures. Title: Multimodal Data at Signalized Intersections: Strategies for Archiving Existing and New Data Streams to Support Operations and Planning & Fusion and Integration of Arterial Performance Data Author: Tufte, Kristin A., Monsere, Christopher M., Kothuri, Sirisha Murthy, Olson, Carl Scott Year: 2013 There is a growing interest in arterial system management due to the increasing amount of travel on arterials and a growing emphasis on multimodal transportation. The benefits of archiving arterial-related data are numerous. This research report describes our efforts to assemble and develop a multimodal archive for the Portland-Vancouver region. There is coverage of data sources from all modes in the metropolitan region; however, the preliminary nature of the archiving process means that some of the data are incomplete and samples. The arterial data sources available in the Portland-Vancouver region and that are covered in this report include data for various local agencies (City of Portland, Clark County, WA, TriMet and C-TRAN) covering vehicle, transit, pedestrian, and bicycle modes. We provide detailed descriptions of each data source and a spatial and temporal classification. The report describes the conceptual framework for an archive and the data collection and archival process, including the process for extracting the data from the agency systems and transferring these data to our multimodal database. Data can be made more useful though the use of improved visualization techniques. Thus as part of the project, a number of novel, online visualizations were created and implemented. These graphs and displays are summarized in this report and example visualizations are shown. As with any automated sensor system, data quality and completeness is an important issue and the challenge of automating data quality is large. Preliminary efforts to validate and monitor data quality and automate data quality processing are explored. Finally, the report presents efforts to combine transit and travel time data and signal timing and vehicle count data to generate some sample congestion measures. Close