Search

Search Results

• 21. [Image] Geothermal investigations at selected thermal systems of the northern Wasatch Front Weber and Box Elder Counties, Utah. Report of investigation No. 141

  	Numerous thermal springs are present along the Wasatch Front from Utah valley on the south to the state line on the north. These systems are just west of the Wasatch Mountains at the eastern edge of the ...
  	Citation × Citation Citation Abstract Copy Title: Geothermal investigations at selected thermal systems of the northern Wasatch Front Weber and Box Elder Counties, Utah. Report of investigation No. 141 Author: Murphy, P. Year: 1979 Numerous thermal springs are present along the Wasatch Front from Utah valley on the south to the state line on the north. These systems are just west of the Wasatch Mountains at the eastern edge of the Basin and Range physiographic province and within the active seismic zone referred to as the Intermountain Seismic Belt. This Report of Investigation is a summary of UGMS investigations at four northern Wasatch Front geothermal systems: Utah, Crystal (Madsen), and Udy hot springs; and the Little Mountain - south system. All of these resources are deep circulation systems and the water is heated by the normal heat flow of the Basin and Range Province. Heat from volcanic sources is not believed to contribute to the warming of any northern Wasatch Front springs. Data collected under the DOE/DGE state coupled program are presented for use by individuals interested in these systems; DOE/ET/28393-18 Title: Geothermal investigations at selected thermal systems of the northern Wasatch Front Weber and Box Elder Counties, Utah. Report of investigation No. 141 Author: Murphy, P. Year: 1979 Numerous thermal springs are present along the Wasatch Front from Utah valley on the south to the state line on the north. These systems are just west of the Wasatch Mountains at the eastern edge of the Basin and Range physiographic province and within the active seismic zone referred to as the Intermountain Seismic Belt. This Report of Investigation is a summary of UGMS investigations at four northern Wasatch Front geothermal systems: Utah, Crystal (Madsen), and Udy hot springs; and the Little Mountain - south system. All of these resources are deep circulation systems and the water is heated by the normal heat flow of the Basin and Range Province. Heat from volcanic sources is not believed to contribute to the warming of any northern Wasatch Front springs. Data collected under the DOE/DGE state coupled program are presented for use by individuals interested in these systems; DOE/ET/28393-18 Close

• 22. [Image] Thermal springs list for the United States; National Oceanic and Atmospheric Administration Key to Geophysical Records Documentation No. 12

  	The compilation has 1702 thermal spring locations in 23 of the 50 States, arranged alphabetically by State (Postal Service abbreviation) and degrees of latitude and longitude within the State. It shows ...
  	Citation × Citation Citation Abstract Copy Title: Thermal springs list for the United States; National Oceanic and Atmospheric Administration Key to Geophysical Records Documentation No. 12 Author: Berry, G.W. Year: 1980 The compilation has 1702 thermal spring locations in 23 of the 50 States, arranged alphabetically by State (Postal Service abbreviation) and degrees of latitude and longitude within the State. It shows spring name, surface temperature in degrees Fahrenheit and degrees Celsius; USGS Professional Paper 492 number, USGS Circular 790 number, NOAA number, north to south on each degree of latitude and longitude of the listed. USGS 1:250,000-scale (AMS) map; and the USGS topographic map coverage, 1:63360- or 1:62500-scale (15-minute) or 1:24000-scale (7.5-minute) quadrangle also included is an alphabetized list showing only the spring name and the State in which it is located. Unnamed springs are omitted. The list includes natural surface hydrothermal features: springs, pools, mud pots, mud volcanoes, geysers, fumaroles, and steam vents at temperature of 20{sup 0}C (68[sup 0}F) or greater. It does not include wells or mines, except at sites where they supplement or replace natural vents presently or recently active, or, in some places, where orifices are not distinguishable as natural or artificial. The listed springs are located on the USGS 1:250,000 (AMS) topographic maps. (MHR) Title: Thermal springs list for the United States; National Oceanic and Atmospheric Administration Key to Geophysical Records Documentation No. 12 Author: Berry, G.W. Year: 1980 The compilation has 1702 thermal spring locations in 23 of the 50 States, arranged alphabetically by State (Postal Service abbreviation) and degrees of latitude and longitude within the State. It shows spring name, surface temperature in degrees Fahrenheit and degrees Celsius; USGS Professional Paper 492 number, USGS Circular 790 number, NOAA number, north to south on each degree of latitude and longitude of the listed. USGS 1:250,000-scale (AMS) map; and the USGS topographic map coverage, 1:63360- or 1:62500-scale (15-minute) or 1:24000-scale (7.5-minute) quadrangle also included is an alphabetized list showing only the spring name and the State in which it is located. Unnamed springs are omitted. The list includes natural surface hydrothermal features: springs, pools, mud pots, mud volcanoes, geysers, fumaroles, and steam vents at temperature of 20{sup 0}C (68[sup 0}F) or greater. It does not include wells or mines, except at sites where they supplement or replace natural vents presently or recently active, or, in some places, where orifices are not distinguishable as natural or artificial. The listed springs are located on the USGS 1:250,000 (AMS) topographic maps. (MHR) Close

• 23. [Image] Dipole-Dipole Resistivity Surveys, Roosevelt Hot Springs KGRA. Final Report, Volume 2

  	Dipole-dipole Resistivity surveys were conducted at Roosevelt Hot Springs KGRA. Three different dipole spacings were used; 99km of traverse line were surveyed with 100m dipoles, 50km with 300m dipoles, ...
  	Citation × Citation Citation Abstract Copy Title: Dipole-Dipole Resistivity Surveys, Roosevelt Hot Springs KGRA. Final Report, Volume 2 Author: Ward, S.H. Year: 1976 Dipole-dipole Resistivity surveys were conducted at Roosevelt Hot Springs KGRA. Three different dipole spacings were used; 99km of traverse line were surveyed with 100m dipoles, 50km with 300m dipoles, and 44km with 1km dipoles. The objectives of the Resistivity surveying were to detect and delineate regions of low Resistivity associated with fracturing, brines, high temperatures, and clay alteration. The Resistivity of rocks that are typical of hydrothermal environments is due to two main conduction mechanisms: (1) electrolytic conduction through pores and fractures; and (2) surface conduction due to a thin zone of cations attracted to those mineral surfaces with net negative charges (especially clay minerals). For saturated rocks, the Resistivity due to electrolytic conduction is a function of the effective porosity of the fractured rock, of the temperature, and of the salinity of the fluid filling the pores and fractures. The Resistivity decreases as the effective porosity, water saturation, salinity, and temperature increase. The presence of clay minerals and pyrite will also decrease the Resistivity Title: Dipole-Dipole Resistivity Surveys, Roosevelt Hot Springs KGRA. Final Report, Volume 2 Author: Ward, S.H. Year: 1976 Dipole-dipole Resistivity surveys were conducted at Roosevelt Hot Springs KGRA. Three different dipole spacings were used; 99km of traverse line were surveyed with 100m dipoles, 50km with 300m dipoles, and 44km with 1km dipoles. The objectives of the Resistivity surveying were to detect and delineate regions of low Resistivity associated with fracturing, brines, high temperatures, and clay alteration. The Resistivity of rocks that are typical of hydrothermal environments is due to two main conduction mechanisms: (1) electrolytic conduction through pores and fractures; and (2) surface conduction due to a thin zone of cations attracted to those mineral surfaces with net negative charges (especially clay minerals). For saturated rocks, the Resistivity due to electrolytic conduction is a function of the effective porosity of the fractured rock, of the temperature, and of the salinity of the fluid filling the pores and fractures. The Resistivity decreases as the effective porosity, water saturation, salinity, and temperature increase. The presence of clay minerals and pyrite will also decrease the Resistivity Close

• 24. [Image] Wilcox sandstone reservoirs in the deep subsurface along the Texas Gulf Coast - their potential for production of geopressured geothermal energy. Final report

  	The following subjects are included: regional setting, stratigraphic sections, Lower Wilcox sandstone distribution, formation pressure, formation temperature used to delineate geothermal fairways, Zapata ...
  	Citation × Citation Citation Abstract Copy Title: Wilcox sandstone reservoirs in the deep subsurface along the Texas Gulf Coast - their potential for production of geopressured geothermal energy. Final report Author: Debout, D.G. Year: 1979 The following subjects are included: regional setting, stratigraphic sections, Lower Wilcox sandstone distribution, formation pressure, formation temperature used to delineate geothermal fairways, Zapata Fairway, Duval Fairway, Live Oak Fairway, De Witt Fairway, Colorado Fairway, and Harris Fairway. Depositional and structural style, formation pressures and temperatures, porosity and permeability, formation water salinity, and Cuero Prospect are covered for De Witt Fairway. Depositional and structural style, formation and fluid properties, and Eagle Lake Prospect are covered for Colorado Fairway. (MHR); DOE/ET/28461-T1 Title: Wilcox sandstone reservoirs in the deep subsurface along the Texas Gulf Coast - their potential for production of geopressured geothermal energy. Final report Author: Debout, D.G. Year: 1979 The following subjects are included: regional setting, stratigraphic sections, Lower Wilcox sandstone distribution, formation pressure, formation temperature used to delineate geothermal fairways, Zapata Fairway, Duval Fairway, Live Oak Fairway, De Witt Fairway, Colorado Fairway, and Harris Fairway. Depositional and structural style, formation pressures and temperatures, porosity and permeability, formation water salinity, and Cuero Prospect are covered for De Witt Fairway. Depositional and structural style, formation and fluid properties, and Eagle Lake Prospect are covered for Colorado Fairway. (MHR); DOE/ET/28461-T1 Close

• 25. [Image] Comparative assessment of five potential sites for magma: hydrothermal systems - geophysics

  	As part of a comparative assessment for the Continental Scientific Drilling Program, geophysical data were used, to characterize and evaluate potential magma-hydrothermal targets at five drill sites in ...
  	Citation × Citation Citation Abstract Copy Title: Comparative assessment of five potential sites for magma: hydrothermal systems - geophysics Author: Kasameyer, P. Year: 1980 As part of a comparative assessment for the Continental Scientific Drilling Program, geophysical data were used, to characterize and evaluate potential magma-hydrothermal targets at five drill sites in the western United States. The sites include Roosevelt Hot Springs, Utah, the Rio Grande Rift, New Mexico, and The Geysers-Clear Lake, Long Valley, and Salton Trough areas, California. This summary discusses the size, depth, temperature, and setting of each potential target, as well as relvant scientific questions about their natures and the certainty of their existence.; UCRL-52980 Title: Comparative assessment of five potential sites for magma: hydrothermal systems - geophysics Author: Kasameyer, P. Year: 1980 As part of a comparative assessment for the Continental Scientific Drilling Program, geophysical data were used, to characterize and evaluate potential magma-hydrothermal targets at five drill sites in the western United States. The sites include Roosevelt Hot Springs, Utah, the Rio Grande Rift, New Mexico, and The Geysers-Clear Lake, Long Valley, and Salton Trough areas, California. This summary discusses the size, depth, temperature, and setting of each potential target, as well as relvant scientific questions about their natures and the certainty of their existence.; UCRL-52980 Close

• 26. [Image] Low-Temperature Geothermal Reservoir Site Evaluation in Arizona Quarterly Progress Report for Periods: May 1, 1977 - July 31, 1977; August 1, 1977 – October 31, 1977; November 1, 1977 – January 31, 1978

  	Progress in the development of a cost-effective exploration program for low- to moderate-temperature geothermal resources is reported. As part of this program two or three demonstration projects in Arizona ...
  	Citation × Citation Citation Abstract Copy Title: Low-Temperature Geothermal Reservoir Site Evaluation in Arizona Quarterly Progress Report for Periods: May 1, 1977 - July 31, 1977; August 1, 1977 – October 31, 1977; November 1, 1977 – January 31, 1978 Author: Hahman, W.R. Sr. Year: 1978 Progress in the development of a cost-effective exploration program for low- to moderate-temperature geothermal resources is reported. As part of this program two or three demonstration projects in Arizona will be brought on stream. The site-specific exploration, evaluation and development program as well as the state wide reconnaissance exploration program is continuing. The compilation of data for a geothermal energy resource map of Arizona has commenced. Geological field work was directed towards obtaining a broad overview of Arizona geology and regional reconnaissance in the Springerville - St. Johns area. All outside projects are on schedule and the Landsat lineament map and report have been completed Title: Low-Temperature Geothermal Reservoir Site Evaluation in Arizona Quarterly Progress Report for Periods: May 1, 1977 - July 31, 1977; August 1, 1977 – October 31, 1977; November 1, 1977 – January 31, 1978 Author: Hahman, W.R. Sr. Year: 1978 Progress in the development of a cost-effective exploration program for low- to moderate-temperature geothermal resources is reported. As part of this program two or three demonstration projects in Arizona will be brought on stream. The site-specific exploration, evaluation and development program as well as the state wide reconnaissance exploration program is continuing. The compilation of data for a geothermal energy resource map of Arizona has commenced. Geological field work was directed towards obtaining a broad overview of Arizona geology and regional reconnaissance in the Springerville - St. Johns area. All outside projects are on schedule and the Landsat lineament map and report have been completed Close

• 27. [Image] Geothermal Investigations in Idaho. Part 8. Heat Flow Study of the Snake River Plain Region, Idaho

  	The Snake River Plain of Idaho has recent lava flows and a large number of thermal springs and wells. A heat flow study was initiated which, together with available geological and geophysical information, ...
  	Citation × Citation Citation Abstract Copy Title: Geothermal Investigations in Idaho. Part 8. Heat Flow Study of the Snake River Plain Region, Idaho Author: Brott, C.A. Year: 1976 The Snake River Plain of Idaho has recent lava flows and a large number of thermal springs and wells. A heat flow study was initiated which, together with available geological and geophysical information, allows a better definition of the geothermal resource and evaluation of the geothermal potential. Local geothermal anomalies were not the objects of this study and have not been studied in detail. The quality of the heat flow values obtained varies as interpretation was necessary to determine geothermal gradients for many of the holes which had disturbances. A major problem in determining the heat flow values is the lack of knowledge of the in situ porosity of the rocks. The heat flow values obtained for the Eastern Snake River Plain are from shallow wells (< 200 m), hence the heat flow there is low (< 0.5 HFU) because of the water movement in the Snake Plain aquifer. The anomalous regional heat flow pattern around the Snake River Plain, together with other geophysical and geological data, suggest the presence of a major crustal heat source. With the exception of the area of the Snake Plain aquifer, high geothermal gradients were found in all areas of southern Idaho (40 to 100/sup 0/C/km). Temperatures hot enough for space heating can be found most anywhere in the Plain at relatively shallow depths (1 to 2 km). Temperatures hot enough for electrical power generation (200/sup 0/C) can be found beneath southern Idaho almost anywhere at depths of 3 to 4 kilometers. The Plain is fault bounded and hot water circulating along the fault zones from depths can be a very important geothermal resource at shallow depths. The margins of the Plain have the highest heat flow values, are the most faulted, and have possibly the highest geothermal resource potential Title: Geothermal Investigations in Idaho. Part 8. Heat Flow Study of the Snake River Plain Region, Idaho Author: Brott, C.A. Year: 1976 The Snake River Plain of Idaho has recent lava flows and a large number of thermal springs and wells. A heat flow study was initiated which, together with available geological and geophysical information, allows a better definition of the geothermal resource and evaluation of the geothermal potential. Local geothermal anomalies were not the objects of this study and have not been studied in detail. The quality of the heat flow values obtained varies as interpretation was necessary to determine geothermal gradients for many of the holes which had disturbances. A major problem in determining the heat flow values is the lack of knowledge of the in situ porosity of the rocks. The heat flow values obtained for the Eastern Snake River Plain are from shallow wells (< 200 m), hence the heat flow there is low (< 0.5 HFU) because of the water movement in the Snake Plain aquifer. The anomalous regional heat flow pattern around the Snake River Plain, together with other geophysical and geological data, suggest the presence of a major crustal heat source. With the exception of the area of the Snake Plain aquifer, high geothermal gradients were found in all areas of southern Idaho (40 to 100/sup 0/C/km). Temperatures hot enough for space heating can be found most anywhere in the Plain at relatively shallow depths (1 to 2 km). Temperatures hot enough for electrical power generation (200/sup 0/C) can be found beneath southern Idaho almost anywhere at depths of 3 to 4 kilometers. The Plain is fault bounded and hot water circulating along the fault zones from depths can be a very important geothermal resource at shallow depths. The margins of the Plain have the highest heat flow values, are the most faulted, and have possibly the highest geothermal resource potential Close

• 28. [Image] Conceptual Design of Commercial 50 MWe(Net) Geothermal Power Plants at Heber and Niland, California. Final Report

  	The scope of work of this study includes conceptual designs, corresponding capital cost estimates and engineering and construction schedules for two 50 MWe (net) commercial-scale geothermal power plants. ...
  	Citation × Citation Citation Abstract Copy Title: Conceptual Design of Commercial 50 MWe(Net) Geothermal Power Plants at Heber and Niland, California. Final Report Author: Bechtel Corporation Year: 1976 The scope of work of this study includes conceptual designs, corresponding capital cost estimates and engineering and construction schedules for two 50 MWe (net) commercial-scale geothermal power plants. In order to develop and illustrate the concepts involved, the reservoir and site conditions of the geothermal field near Heber, California, which has moderate-temperature low-salinity brine, were used for one of the power plants. The conditions of the field near Niland, California (or the Salton Sea Geothermal Field), which has high-temperature high-salinity brine, were used for the other plant. Both fields are located in the Imperial Valley in Southern California. The two plants give perspective on plant design and capital costs for the range of hydrothermal resources that are of economic interest for electric power generation Title: Conceptual Design of Commercial 50 MWe(Net) Geothermal Power Plants at Heber and Niland, California. Final Report Author: Bechtel Corporation Year: 1976 The scope of work of this study includes conceptual designs, corresponding capital cost estimates and engineering and construction schedules for two 50 MWe (net) commercial-scale geothermal power plants. In order to develop and illustrate the concepts involved, the reservoir and site conditions of the geothermal field near Heber, California, which has moderate-temperature low-salinity brine, were used for one of the power plants. The conditions of the field near Niland, California (or the Salton Sea Geothermal Field), which has high-temperature high-salinity brine, were used for the other plant. Both fields are located in the Imperial Valley in Southern California. The two plants give perspective on plant design and capital costs for the range of hydrothermal resources that are of economic interest for electric power generation Close

• 29. [Image] Linear Polarization Measurements at High Temperatures in Hypersaline Geothermal Brines

  	The Bureau of Mines conducted a series of in situ linear polarization measurements in high-temperature, high-pressure hypersaline geothermal brines at the Bureau of Mines Geothermal Test Facility in the ...
  	Citation × Citation Citation Abstract Copy Title: Linear Polarization Measurements at High Temperatures in Hypersaline Geothermal Brines Author: Cramer, S.D. Year: 1978 The Bureau of Mines conducted a series of in situ linear polarization measurements in high-temperature, high-pressure hypersaline geothermal brines at the Bureau of Mines Geothermal Test Facility in the Imperial Valley of California. The measurements represented an evaluation of the linear polarization technique for obtaining instantaneous corrosion rates of materials of construction in flowing hypersaline hydrothermal fluids that rapidly form scales on exposed surfaces. A special method was devised for use with the linear polarization technique that resulted in obtaining corrosion rates for 1020 carbon steel, 316 and 430 stainless steel, titanium, various nickel-based alloys, and aluminum 6061 under strong scale-forming conditions. The measurements also provided information on scale-deposition rates in various geothermal environments. Exploratory in situ potentiostatic polarization measurements were made in the flowing brines to qualitatively determine scale-deposition effects on the electrochemical measurements Title: Linear Polarization Measurements at High Temperatures in Hypersaline Geothermal Brines Author: Cramer, S.D. Year: 1978 The Bureau of Mines conducted a series of in situ linear polarization measurements in high-temperature, high-pressure hypersaline geothermal brines at the Bureau of Mines Geothermal Test Facility in the Imperial Valley of California. The measurements represented an evaluation of the linear polarization technique for obtaining instantaneous corrosion rates of materials of construction in flowing hypersaline hydrothermal fluids that rapidly form scales on exposed surfaces. A special method was devised for use with the linear polarization technique that resulted in obtaining corrosion rates for 1020 carbon steel, 316 and 430 stainless steel, titanium, various nickel-based alloys, and aluminum 6061 under strong scale-forming conditions. The measurements also provided information on scale-deposition rates in various geothermal environments. Exploratory in situ potentiostatic polarization measurements were made in the flowing brines to qualitatively determine scale-deposition effects on the electrochemical measurements Close

• 30. [Image] Thermal Gradient and Heat Flow Drilling, Volume 5, Final Report

  	During the summer of 1975, the Department of Geology and Geophysics drilled nine drill thermal gradient/heat flow holes. Total footage drilled was 2125 feet. Seven holes were drilled with a Mayhew 1000 ...
  	Citation × Citation Citation Abstract Copy Title: Thermal Gradient and Heat Flow Drilling, Volume 5, Final Report Author: Whelan, J.A. Year: 1977 During the summer of 1975, the Department of Geology and Geophysics drilled nine drill thermal gradient/heat flow holes. Total footage drilled was 2125 feet. Seven holes were drilled with a Mayhew 1000 drill using various combinations of down the hole hammer drilling, rotary drilling, and NX diamond core drilling. Three of these were heat flow holes--one in the Mineral Range, one in the Tushar Range near Beaver, Utah, and one near Monroe, Utah. Two were alteration study holes in the Roosevelt KGRA and two were temperature gradient holes, in alluvium in the Roosevelt KGRA. The average depth of the holes drilled with the Mayhew 1000 drill was 247 feet. Holes ranged from 135 feet to 492 feet. Cost per foot averaged $18.53. Two holes were core drilled with a Joy 12, BX-size drill. One was to 75 feet, in perlite. This hole was abandoned. The other was to 323 feet in granite. These holes averaged $13.82 per foot. Permission to drill was obtained from BLM and drill sites were inspected with BLM personnel to avoid disturbing archeological sites. Sites were reseeded where disturbed. Holes were completed by setting capped one-inch black iron pipe, backfilling the hole with cuttings to 10 feet from surface and cementing to the surface Title: Thermal Gradient and Heat Flow Drilling, Volume 5, Final Report Author: Whelan, J.A. Year: 1977 During the summer of 1975, the Department of Geology and Geophysics drilled nine drill thermal gradient/heat flow holes. Total footage drilled was 2125 feet. Seven holes were drilled with a Mayhew 1000 drill using various combinations of down the hole hammer drilling, rotary drilling, and NX diamond core drilling. Three of these were heat flow holes--one in the Mineral Range, one in the Tushar Range near Beaver, Utah, and one near Monroe, Utah. Two were alteration study holes in the Roosevelt KGRA and two were temperature gradient holes, in alluvium in the Roosevelt KGRA. The average depth of the holes drilled with the Mayhew 1000 drill was 247 feet. Holes ranged from 135 feet to 492 feet. Cost per foot averaged $18.53. Two holes were core drilled with a Joy 12, BX-size drill. One was to 75 feet, in perlite. This hole was abandoned. The other was to 323 feet in granite. These holes averaged $13.82 per foot. Permission to drill was obtained from BLM and drill sites were inspected with BLM personnel to avoid disturbing archeological sites. Sites were reseeded where disturbed. Holes were completed by setting capped one-inch black iron pipe, backfilling the hole with cuttings to 10 feet from surface and cementing to the surface Close