Search

Search Results

• 1. [Image] Geothermal Modeling of the Raft River Geothermal Field

  	The results to date of chemical modeling of the Raft River KGRA are presented. Earlier work indicated a northwest-southeast anomaly in the contours. Modeling techniques applied to more complete data allowed ...
  	Citation × Citation Citation Abstract Copy Title: Geothermal Modeling of the Raft River Geothermal Field Author: Overton, H.L. Year: 1979 The results to date of chemical modeling of the Raft River KGRA are presented. Earlier work indicated a northwest-southeast anomaly in the contours. Modeling techniques applied to more complete data allowed further definition of the anomaly. Models described in this report show the source of various minerals in the geothermal water. There appears to be a regional heat source that gives rise to uniform conductive heat flow in the region, but convective flow is concentrated near the upwelling in the Crook well vicinity. Recommendations are made concerning field expansion and additional work needed to refine the overall reservoir model; EGG-2004 Title: Geothermal Modeling of the Raft River Geothermal Field Author: Overton, H.L. Year: 1979 The results to date of chemical modeling of the Raft River KGRA are presented. Earlier work indicated a northwest-southeast anomaly in the contours. Modeling techniques applied to more complete data allowed further definition of the anomaly. Models described in this report show the source of various minerals in the geothermal water. There appears to be a regional heat source that gives rise to uniform conductive heat flow in the region, but convective flow is concentrated near the upwelling in the Crook well vicinity. Recommendations are made concerning field expansion and additional work needed to refine the overall reservoir model; EGG-2004 Close

• 2. [Image] Geological and Geophysical Analysis of Coso Geothermal Exploration Hole No. 1 (CGEH-1), Coso Hot Springs KGRA, California

  	The Coso Geothermal Exploration Hole number one (CGEH-1) was drilled in the Coso Hot Springs KGRA, California from September 2 to December 2, 1977. Chip samples were collected at ten foot intervals and ...
  	Citation × Citation Citation Abstract Copy Title: Geological and Geophysical Analysis of Coso Geothermal Exploration Hole No. 1 (CGEH-1), Coso Hot Springs KGRA, California Author: Galbraith, R.M. Year: 1978 The Coso Geothermal Exploration Hole number one (CGEH-1) was drilled in the Coso Hot Springs KGRA, California from September 2 to December 2, 1977. Chip samples were collected at ten foot intervals and extensive geophysical logging surveys were conducted to document the geologic character of the geothermal system as penetrated by CGEH-1. The major rock units encountered include a mafic metamorphic sequence and a leucogranite which intruded the metamorphic rocks. Only weak hydrothermal alteration was noted in these rocks. Drillhole surveys and drilling rate data indicate that the geothermal system is structurally controlled and that the drillhole itself was strongly influenced by structural zones. Water chemistry indicates that this geothermal resource is a hot-water rather than a vapor-dominated system. Several geophysical logs were employed to characterize the drillhole geology. The natural gamma and neutron porosity logs indicate gross rock type and the acoustic logs indicate fractured rock and potentially permeable zones. A series of temperature logs run as a function of time during and after the completion of Drilling were most Useful in delineating the zones of maximum heat flux. Convective heat flow and temperatures greater than 350/sup 0/F appear to occur only along an open fracture system encountered between depths of 1850 and 2775 feet. Temperature logs indicate a negative thermal gradient below 3000 feet Title: Geological and Geophysical Analysis of Coso Geothermal Exploration Hole No. 1 (CGEH-1), Coso Hot Springs KGRA, California Author: Galbraith, R.M. Year: 1978 The Coso Geothermal Exploration Hole number one (CGEH-1) was drilled in the Coso Hot Springs KGRA, California from September 2 to December 2, 1977. Chip samples were collected at ten foot intervals and extensive geophysical logging surveys were conducted to document the geologic character of the geothermal system as penetrated by CGEH-1. The major rock units encountered include a mafic metamorphic sequence and a leucogranite which intruded the metamorphic rocks. Only weak hydrothermal alteration was noted in these rocks. Drillhole surveys and drilling rate data indicate that the geothermal system is structurally controlled and that the drillhole itself was strongly influenced by structural zones. Water chemistry indicates that this geothermal resource is a hot-water rather than a vapor-dominated system. Several geophysical logs were employed to characterize the drillhole geology. The natural gamma and neutron porosity logs indicate gross rock type and the acoustic logs indicate fractured rock and potentially permeable zones. A series of temperature logs run as a function of time during and after the completion of Drilling were most Useful in delineating the zones of maximum heat flux. Convective heat flow and temperatures greater than 350/sup 0/F appear to occur only along an open fracture system encountered between depths of 1850 and 2775 feet. Temperature logs indicate a negative thermal gradient below 3000 feet Close

• 3. [Image] Site-Specific Analysis of Hybrid Geothermal / Fossil Power Plants Volume One: Roosevelt Hot Springs KGRA

  	The economics of a particular hybrid plant must be evaluated with respect to a specific site. This volume focuses on the Roosevelt Hot Springs KGRA. The temperature, pressure, and flow rate data given ...
  	Citation × Citation Citation Abstract Copy Title: Site-Specific Analysis of Hybrid Geothermal / Fossil Power Plants Volume One: Roosevelt Hot Springs KGRA Author: Burbank City Public Service Dept., CA (USA) Year: 1977 The economics of a particular hybrid plant must be evaluated with respect to a specific site. This volume focuses on the Roosevelt Hot Springs KGRA. The temperature, pressure, and flow rate data given suggests the site deserves serious consideration for a hybrid plant. Key siting considerations which must be addressed before an economic judgment can be attempted are presented as follows: the availability, quality, and cost of coal; the availability of water; and the availability of transmission. Seismological and climate factors are presented Title: Site-Specific Analysis of Hybrid Geothermal / Fossil Power Plants Volume One: Roosevelt Hot Springs KGRA Author: Burbank City Public Service Dept., CA (USA) Year: 1977 The economics of a particular hybrid plant must be evaluated with respect to a specific site. This volume focuses on the Roosevelt Hot Springs KGRA. The temperature, pressure, and flow rate data given suggests the site deserves serious consideration for a hybrid plant. Key siting considerations which must be addressed before an economic judgment can be attempted are presented as follows: the availability, quality, and cost of coal; the availability of water; and the availability of transmission. Seismological and climate factors are presented Close

• 4. [Image] Petrology of the Quaternary Volcanics of the Roosevelt KGRA, and Adjoining Area, Utah. Final Report, Volume 1

  	The Roosevelt KGRA (Known Geothermal Resource Area) located near Milford, Utah, is associated with a suite of quaternary silicic volcanics distributed for 15 km along the crest and western flank of the ...
  	Citation × Citation Citation Abstract Copy Title: Petrology of the Quaternary Volcanics of the Roosevelt KGRA, and Adjoining Area, Utah. Final Report, Volume 1 Author: Nash, W.P. Year: 1976 The Roosevelt KGRA (Known Geothermal Resource Area) located near Milford, Utah, is associated with a suite of quaternary silicic volcanics distributed for 15 km along the crest and western flank of the Mineral Mountains, a large tertiary granite batholith. The volcanics are high-silica rhyolites and occur as domes, flows and tuffs. Initial eruptions resulted in two flows of low viscosity, phenocryst-poor rhyolite. Later activity consisted of pyroclastic eruptions and the emplacement of at least 9 viscous domes. In addition to abundant glass the rhyolites contain alkali feldspar, plagioclase, biotite, iron-titanium oxides and small amounts of hornblende, allanite, apatite, zircon, sphene and topaz. Magmatic temperatures were about 700C and water fugacities ranged from 350 to 3450 bars. Based on water fugacity calculations it is concluded that there may have been one or more shallow magma chambers in the Mineral Range at depths of about 1.6 km. Title: Petrology of the Quaternary Volcanics of the Roosevelt KGRA, and Adjoining Area, Utah. Final Report, Volume 1 Author: Nash, W.P. Year: 1976 The Roosevelt KGRA (Known Geothermal Resource Area) located near Milford, Utah, is associated with a suite of quaternary silicic volcanics distributed for 15 km along the crest and western flank of the Mineral Mountains, a large tertiary granite batholith. The volcanics are high-silica rhyolites and occur as domes, flows and tuffs. Initial eruptions resulted in two flows of low viscosity, phenocryst-poor rhyolite. Later activity consisted of pyroclastic eruptions and the emplacement of at least 9 viscous domes. In addition to abundant glass the rhyolites contain alkali feldspar, plagioclase, biotite, iron-titanium oxides and small amounts of hornblende, allanite, apatite, zircon, sphene and topaz. Magmatic temperatures were about 700C and water fugacities ranged from 350 to 3450 bars. Based on water fugacity calculations it is concluded that there may have been one or more shallow magma chambers in the Mineral Range at depths of about 1.6 km. Close

• 5. [Image] DHE (Downhole Heat Exchangers)

  	The use of downhole heat exchangers (DHE) for residential or commercial space and domestic water heating and other applications has several desirable features. Systems are nearly or completely passive ...
  	Citation × Citation Citation Abstract Copy Title: DHE (Downhole Heat Exchangers) Author: Culver, G. Year: 1990 The use of downhole heat exchangers (DHE) for residential or commercial space and domestic water heating and other applications has several desirable features. Systems are nearly or completely passive -- that is, no or very little geothermal water or steam is produced from the well either reducing or completely eliminating surface environmental concerns and the need for disposal systems or injection wells. Initial cost of pumps and installation are eliminated or reduced along with pumping power costs and maintenance costs associated with pumping often corrosive geothermal fluids. Many residential and small commercial systems do not require circulating pumps because the density difference in the incoming and outgoing sides of the loop are sufficient to overcome circulating friction losses in the entire system. The major disadvantage of DHEs is their dependence on natural heat flow. In areas where geological conditions provide high permeability and a natural hydraulic gradient, DHEs can provide a substantial quantity of heat. A single 500-ft (152 m) well in Klamath Falls, Oregon, supplies over one megawatt thermal and output is apparently limited by the surface area of pipe that can be installed in the well bore. In contrast, DHEs used in conjunction with heat pumps may supply less than 8 KW from a well of similar depth. Here output is limited by conductive heat flow with perhaps a small contribution from convection near the well bore. The highest capacity DHE reported to date, in Turkey, supplies 6 MW thermal from an 820-ft (250 m) well. There were two main goals for this project. The first was to gather, disseminate and exchange internationally information on DHEs. The second was to perform experiments that would provide insight into well bore/aquifer interaction and thereby provide more information on which to base DHE designs. 27 refs., 31 figs., 3 tabs. Title: DHE (Downhole Heat Exchangers) Author: Culver, G. Year: 1990 The use of downhole heat exchangers (DHE) for residential or commercial space and domestic water heating and other applications has several desirable features. Systems are nearly or completely passive -- that is, no or very little geothermal water or steam is produced from the well either reducing or completely eliminating surface environmental concerns and the need for disposal systems or injection wells. Initial cost of pumps and installation are eliminated or reduced along with pumping power costs and maintenance costs associated with pumping often corrosive geothermal fluids. Many residential and small commercial systems do not require circulating pumps because the density difference in the incoming and outgoing sides of the loop are sufficient to overcome circulating friction losses in the entire system. The major disadvantage of DHEs is their dependence on natural heat flow. In areas where geological conditions provide high permeability and a natural hydraulic gradient, DHEs can provide a substantial quantity of heat. A single 500-ft (152 m) well in Klamath Falls, Oregon, supplies over one megawatt thermal and output is apparently limited by the surface area of pipe that can be installed in the well bore. In contrast, DHEs used in conjunction with heat pumps may supply less than 8 KW from a well of similar depth. Here output is limited by conductive heat flow with perhaps a small contribution from convection near the well bore. The highest capacity DHE reported to date, in Turkey, supplies 6 MW thermal from an 820-ft (250 m) well. There were two main goals for this project. The first was to gather, disseminate and exchange internationally information on DHEs. The second was to perform experiments that would provide insight into well bore/aquifer interaction and thereby provide more information on which to base DHE designs. 27 refs., 31 figs., 3 tabs. Close

• 6. [Image] Delineation of an electrical resistivity anomaly, Malpais area, Beowawe KGRA, Eureka and Lander Counties, Nevada

  	A simple numerical model of previously released bipole-dipole resistivity data shows the margin of the graben to be anomalously conductive below the Malpais. The conductive area has been delineated with ...
  	Citation × Citation Citation Abstract Copy Title: Delineation of an electrical resistivity anomaly, Malpais area, Beowawe KGRA, Eureka and Lander Counties, Nevada Author: Smith, C. Year: 1980 A simple numerical model of previously released bipole-dipole resistivity data shows the margin of the graben to be anomalously conductive below the Malpais. The conductive area has been delineated with data from a dipole-dipole resistivity survey run in April 1980 for this study. Detailed numerical models of these data define a 1250 m wide body with resistivities less than 20 ohm-m that appear to connect The Geysers and the graben boundary. The minimum depth to the conductor is interpreted to be 375 m; its depth extent is undetermined. The electrical data do not resolve whether the anomaly below the Malpais may be the product of a defunct hydrothermal system or the signature of an active system. If thermal gradient data detect an enhanced heat flow anomaly in the same area, the Malpais may be a viable geothermal exploration target within the Beowawe KGRA; DOE/ID/12079-7 Title: Delineation of an electrical resistivity anomaly, Malpais area, Beowawe KGRA, Eureka and Lander Counties, Nevada Author: Smith, C. Year: 1980 A simple numerical model of previously released bipole-dipole resistivity data shows the margin of the graben to be anomalously conductive below the Malpais. The conductive area has been delineated with data from a dipole-dipole resistivity survey run in April 1980 for this study. Detailed numerical models of these data define a 1250 m wide body with resistivities less than 20 ohm-m that appear to connect The Geysers and the graben boundary. The minimum depth to the conductor is interpreted to be 375 m; its depth extent is undetermined. The electrical data do not resolve whether the anomaly below the Malpais may be the product of a defunct hydrothermal system or the signature of an active system. If thermal gradient data detect an enhanced heat flow anomaly in the same area, the Malpais may be a viable geothermal exploration target within the Beowawe KGRA; DOE/ID/12079-7 Close

• 7. [Image] Initial Investigation of Soil Mercury Geochemistry as an Aid to Drill Site Selection in Geothermal Systems

  	A mercury-in-soil survey was conducted at the Roosevelt Hot Springs Known Geothermal Resource Area (KGRA), Utah, to evaluate mercury soil geochemistry as a method of selecting exploration well sites in ...
  	Citation × Citation Citation Abstract Copy Title: Initial Investigation of Soil Mercury Geochemistry as an Aid to Drill Site Selection in Geothermal Systems Author: Capuano, R.M. Year: 1978 A mercury-in-soil survey was conducted at the Roosevelt Hot Springs Known Geothermal Resource Area (KGRA), Utah, to evaluate mercury soil geochemistry as a method of selecting exploration well sites in a hot-water geothermal system. Samples of -80 mesh soil were collected at 30.5 m intervals along traverses crossing known structures, surficial geothermal alteration, and exploration well sites, and were analyzed using a Gold Film Mercury Detector. Strong mercury anomalies occur at locations along known structures in close proximity to subsurface thermal activity; examples include areas over hot spring deposits and near a shallow producing well. In contrast, background mercury concentrations are present in nearby locations with little or no indication of subsurface thermal activity, such as areas around deep marginal producing wells and dry wells, and areas lacking hot spring deposits. These results indicate that mercury geochemical surveys can be useful for identifying and mapping structures controlling fluid flow in geothermal systems and for delineating areas overlying near-surface thermal activity. Soil mercury geochemistry thus provides information which may aid in the cost-effective selection of exploratory well sites Title: Initial Investigation of Soil Mercury Geochemistry as an Aid to Drill Site Selection in Geothermal Systems Author: Capuano, R.M. Year: 1978 A mercury-in-soil survey was conducted at the Roosevelt Hot Springs Known Geothermal Resource Area (KGRA), Utah, to evaluate mercury soil geochemistry as a method of selecting exploration well sites in a hot-water geothermal system. Samples of -80 mesh soil were collected at 30.5 m intervals along traverses crossing known structures, surficial geothermal alteration, and exploration well sites, and were analyzed using a Gold Film Mercury Detector. Strong mercury anomalies occur at locations along known structures in close proximity to subsurface thermal activity; examples include areas over hot spring deposits and near a shallow producing well. In contrast, background mercury concentrations are present in nearby locations with little or no indication of subsurface thermal activity, such as areas around deep marginal producing wells and dry wells, and areas lacking hot spring deposits. These results indicate that mercury geochemical surveys can be useful for identifying and mapping structures controlling fluid flow in geothermal systems and for delineating areas overlying near-surface thermal activity. Soil mercury geochemistry thus provides information which may aid in the cost-effective selection of exploratory well sites Close