Search

Search Results

• 1. [Image] Research on the Physical Properties of Geothermal Reservoir Rock. Quarterly Report.

  	Laboratory measurements of thermal conductivity and capillary pressure have been undertaken for samples of Cenozoic Volcanic rocks collected from the Columbia Plateau Volcanic basin. These measurements ...
  	Citation × Citation Citation Abstract Copy Title: Research on the Physical Properties of Geothermal Reservoir Rock. Quarterly Report. Author: Skokan, C.K. Year: 1978 Laboratory measurements of thermal conductivity and capillary pressure have been undertaken for samples of Cenozoic Volcanic rocks collected from the Columbia Plateau Volcanic basin. These measurements were performed at atmospheric pressure and room temperature. Various methods of measuring thermal conductivity were investigated and finally a flash method was chosen. The equipment was constructed and tested. The results were favorable. Numerous capillary pressure curves were obtained by use of the mercury injection technique. These curves indicate pore structure: pore size, pore distribution, pore volume, and pore geometry. Measurements of this type help to explain variations in rock properties such as seismic velocities and resistivities Title: Research on the Physical Properties of Geothermal Reservoir Rock. Quarterly Report. Author: Skokan, C.K. Year: 1978 Laboratory measurements of thermal conductivity and capillary pressure have been undertaken for samples of Cenozoic Volcanic rocks collected from the Columbia Plateau Volcanic basin. These measurements were performed at atmospheric pressure and room temperature. Various methods of measuring thermal conductivity were investigated and finally a flash method was chosen. The equipment was constructed and tested. The results were favorable. Numerous capillary pressure curves were obtained by use of the mercury injection technique. These curves indicate pore structure: pore size, pore distribution, pore volume, and pore geometry. Measurements of this type help to explain variations in rock properties such as seismic velocities and resistivities Close

• 2. [Image] Failure Analysis Report: Geothermal Heating System Components, Oregon Institute of Technology, Klamath Falls, Oregon

  	The results are presented of an examination of 17 samples obtained from various components of the subject geothermal heating system. The samples obtained for this study were selected to represent the several ...
  	Citation × Citation Citation Abstract Copy Title: Failure Analysis Report: Geothermal Heating System Components, Oregon Institute of Technology, Klamath Falls, Oregon Author: Mitchell, D.A. Year: 1979 The results are presented of an examination of 17 samples obtained from various components of the subject geothermal heating system. The samples obtained for this study were selected to represent the several materials of construction and equipment ages of the various components in this system. For purposes of this report, the samples have been grouped into three categories by material: ferrous, non-ferrous and non-metallic. Failures in these components have taken the form of leakage at solder joints, tubing perforation, scaling, or valve seizure. Most components evaluated in this examination have been in service for 14 years. This work documents these failures, discusses their causes and recommends possible remedial action Title: Failure Analysis Report: Geothermal Heating System Components, Oregon Institute of Technology, Klamath Falls, Oregon Author: Mitchell, D.A. Year: 1979 The results are presented of an examination of 17 samples obtained from various components of the subject geothermal heating system. The samples obtained for this study were selected to represent the several materials of construction and equipment ages of the various components in this system. For purposes of this report, the samples have been grouped into three categories by material: ferrous, non-ferrous and non-metallic. Failures in these components have taken the form of leakage at solder joints, tubing perforation, scaling, or valve seizure. Most components evaluated in this examination have been in service for 14 years. This work documents these failures, discusses their causes and recommends possible remedial action Close

• 3. [Image] Failure Analysis Report: Geothermal Heating System Components, Oregon Institute of Technology, Klamath Falls, Oregon

  	The results are presented of an examination of 17 samples obtained from various components of the subject geothermal heating system. The samples obtained for this study were selected to represent the several ...
  	Citation × Citation Citation Abstract Copy Title: Failure Analysis Report: Geothermal Heating System Components, Oregon Institute of Technology, Klamath Falls, Oregon Author: Mitchell, D.A. Year: 1979 The results are presented of an examination of 17 samples obtained from various components of the subject geothermal heating system. The samples obtained for this study were selected to represent the several materials of construction and equipment ages of the various components in this system. For purposes of this report, the samples have been grouped into three categories by material: ferrous, non-ferrous and non-metallic. Failures in these components have taken the form of leakage at solder joints, tubing perforation, scaling, or valve seizure. Most components evaluated in this examination have been in service for 14 years. This work documents these failures, discusses their causes and recommends possible remedial action Title: Failure Analysis Report: Geothermal Heating System Components, Oregon Institute of Technology, Klamath Falls, Oregon Author: Mitchell, D.A. Year: 1979 The results are presented of an examination of 17 samples obtained from various components of the subject geothermal heating system. The samples obtained for this study were selected to represent the several materials of construction and equipment ages of the various components in this system. For purposes of this report, the samples have been grouped into three categories by material: ferrous, non-ferrous and non-metallic. Failures in these components have taken the form of leakage at solder joints, tubing perforation, scaling, or valve seizure. Most components evaluated in this examination have been in service for 14 years. This work documents these failures, discusses their causes and recommends possible remedial action Close

• 4. [Image] Market Feasibility Assessment of Four Development Projects

  	This report is the result of work by the Center for Business and Economic Research (CBER), California State University, Chico, under contract with Fort Bidwell Indian Community Council (FBICC) to assess ...
  	Citation × Citation Citation Abstract Copy Title: Market Feasibility Assessment of Four Development Projects Author: The Center for Business and Economic Research Year: 1980 This report is the result of work by the Center for Business and Economic Research (CBER), California State University, Chico, under contract with Fort Bidwell Indian Community Council (FBICC) to assess the economic feasibility of four projects specified by FBICC: Freshwater Prawn Production; Hydroponic Rose Production; Christmas Tree Harvesting; and the Incentives and Impact of Attracting an Electronic Assembly Firm to Fort Bidwell Title: Market Feasibility Assessment of Four Development Projects Author: The Center for Business and Economic Research Year: 1980 This report is the result of work by the Center for Business and Economic Research (CBER), California State University, Chico, under contract with Fort Bidwell Indian Community Council (FBICC) to assess the economic feasibility of four projects specified by FBICC: Freshwater Prawn Production; Hydroponic Rose Production; Christmas Tree Harvesting; and the Incentives and Impact of Attracting an Electronic Assembly Firm to Fort Bidwell Close

• 5. [Image] Investigation and evaluation of geopressured-geothermal wells. Fairfax Foster Sutter No. 2 well, St. Mary Parish, Louisiana. Volume I. Completion and testing. Final report

  	The Fairfax Foster Sutter No. 2 well, located in the East Franklin area of St. Mary Parish, Louisiana, is the first successful test of a geopressured-geothermal aquifer under the Well-of-Opportunity program. ...
  	Citation × Citation Citation Abstract Copy Title: Investigation and evaluation of geopressured-geothermal wells. Fairfax Foster Sutter No. 2 well, St. Mary Parish, Louisiana. Volume I. Completion and testing. Final report Author: Willits, M.H. Year: 1979 The Fairfax Foster Sutter No. 2 well, located in the East Franklin area of St. Mary Parish, Louisiana, is the first successful test of a geopressured-geothermal aquifer under the Well-of-Opportunity program. The section tested was the MA-6 sand of lower Miocene age which has produced large quantities of gas from the adjacent but structurally separated Garden City field. In the subject well the observed temperature was 270{sup 0}F (132{sup 0}C) and the measured gradient was 0.77 psi/ft. The gross sand thickness was 270 feet, the net sand thickness 190 feet, and the tested interval 58 net feet. The temperatures and pressures encountered approached the limits of the surface-recording bottomhole pressure gauge and particularly the single-conductor cables on which the gauges were run. The objectives of the tests were all accomplished, and data were obtained which will contribute to the overall assessment of the geopressured-geothermal resource of the Upper Gulf of Mexico basin. In general, the gas solubility (22.8 scf/bbl) was as expected for the temperature, pressure, and salinity of the brine. The produced water was more saline than expected (160,000 mg/l). The high concentrations of dissolved solids, coupled with the evolution of CO{sub 2} from these waters during production, created a scaling problem in the tubular goods and surface equipment that will have to be addressed in future tests; DOE/ET/28460-1 Title: Investigation and evaluation of geopressured-geothermal wells. Fairfax Foster Sutter No. 2 well, St. Mary Parish, Louisiana. Volume I. Completion and testing. Final report Author: Willits, M.H. Year: 1979 The Fairfax Foster Sutter No. 2 well, located in the East Franklin area of St. Mary Parish, Louisiana, is the first successful test of a geopressured-geothermal aquifer under the Well-of-Opportunity program. The section tested was the MA-6 sand of lower Miocene age which has produced large quantities of gas from the adjacent but structurally separated Garden City field. In the subject well the observed temperature was 270{sup 0}F (132{sup 0}C) and the measured gradient was 0.77 psi/ft. The gross sand thickness was 270 feet, the net sand thickness 190 feet, and the tested interval 58 net feet. The temperatures and pressures encountered approached the limits of the surface-recording bottomhole pressure gauge and particularly the single-conductor cables on which the gauges were run. The objectives of the tests were all accomplished, and data were obtained which will contribute to the overall assessment of the geopressured-geothermal resource of the Upper Gulf of Mexico basin. In general, the gas solubility (22.8 scf/bbl) was as expected for the temperature, pressure, and salinity of the brine. The produced water was more saline than expected (160,000 mg/l). The high concentrations of dissolved solids, coupled with the evolution of CO{sub 2} from these waters during production, created a scaling problem in the tubular goods and surface equipment that will have to be addressed in future tests; DOE/ET/28460-1 Close