Search

Search Results

• 1. [Article] Willamette River Basin Temperature TMDL Model: Model Calibration

  The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all ...

  Citation × Citation Citation Abstract Copy Title: Willamette River Basin Temperature TMDL Model: Model Calibration Author: Berger, Chris, McKillip, Michael Lee, Annear, Robert Leslie, Khan, Sher Jamal, Wells, Scott A. Year: 2004 The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all major tributaries (except the Tualatin River where a TMDL process was already concluded). A large section of the Columbia River was also modeled to provide adequate boundary representation of tidal flows in the lower Willamette River. The Willamette River below the Oregon City Falls in the Portland metropolitan area has a typical diurnal tidal range of 1 m. The development of a dynamic model of temperature and hydrodynamics of the entire river basin incorporating shading were primary requirements of this modeling study. The model would be used by DEQ to set temperature limits on point source dischargers and to evaluate the impact of management strategies on river temperatures to improve fish habitat. Some of these strategies included modifications of the dam at the Willamette River Falls south of Portland and channel reconfigurations. The river basin model was originally divided into several reaches. Individual models were developed for each reach. The models were set-up for each section of the Willamette basin as described in Annear et al. (2004a), the models were calibrated to field data and management strategies were evaluated as described in Annear et al (2004b). This report outlines the model calibration of each of these model sections or elements for both the calibration time periods. The calibration period for each model section differs due to the availability of boundary condition data. The model management simulation scenarios (Annear et al, 2004b) also required boundary condition data that extended past the calibration periods. Title: Willamette River Basin Temperature TMDL Model: Model Calibration Author: Berger, Chris, McKillip, Michael Lee, Annear, Robert Leslie, Khan, Sher Jamal, Wells, Scott A. Year: 2004 The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all major tributaries (except the Tualatin River where a TMDL process was already concluded). A large section of the Columbia River was also modeled to provide adequate boundary representation of tidal flows in the lower Willamette River. The Willamette River below the Oregon City Falls in the Portland metropolitan area has a typical diurnal tidal range of 1 m. The development of a dynamic model of temperature and hydrodynamics of the entire river basin incorporating shading were primary requirements of this modeling study. The model would be used by DEQ to set temperature limits on point source dischargers and to evaluate the impact of management strategies on river temperatures to improve fish habitat. Some of these strategies included modifications of the dam at the Willamette River Falls south of Portland and channel reconfigurations. The river basin model was originally divided into several reaches. Individual models were developed for each reach. The models were set-up for each section of the Willamette basin as described in Annear et al. (2004a), the models were calibrated to field data and management strategies were evaluated as described in Annear et al (2004b). This report outlines the model calibration of each of these model sections or elements for both the calibration time periods. The calibration period for each model section differs due to the availability of boundary condition data. The model management simulation scenarios (Annear et al, 2004b) also required boundary condition data that extended past the calibration periods. Close

• 2. [Article] Willamette River Basin Temperature TMDL Model: Model Scenarios

  The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all ...

  Citation × Citation Citation Abstract Copy Title: Willamette River Basin Temperature TMDL Model: Model Scenarios Author: Annear, Robert Leslie, McKillip, Michael Lee, Khan, Sher Jamal, Berger, Chris, Wells, Scott A. Year: 2004 The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all major tributaries (except the Tualatin River where a TMDL process was already concluded). A large section of the Columbia River was also modeled to provide adequate boundary representation of tidal flows in the lower Willamette River. The Willamette River below the Oregon City Falls in the Portland metropolitan area has a typical diurnal tidal range of 1 m. The development of a dynamic model of temperature and hydrodynamics of the entire river basin incorporating shading were primary requirements of this modeling study. The model would be used by DEQ to set temperature limits on point source dischargers and to evaluate the impact of management strategies on river temperatures to improve fish habitat. Some of these strategies included modifications of the dam at the Willamette River Falls south of Portland and channel reconfigurations. Once the models were set-up for each section of the Willamette basin, the model was calibrated to field data and management strategies were evaluated. These are the subjects of two other reports: Annear et al. (2004) and Berger et al. (2004). This report outlines the results of implementing model scenarios for each of the model sections or elements for specific time periods. The model scenario simulation periods used to investigate management scenarios required boundary condition data that extended past the model calibration periods. The model simulation period for year 2001 was from June 1 to October 31 and for year 2002 from April 1 to October 31. Title: Willamette River Basin Temperature TMDL Model: Model Scenarios Author: Annear, Robert Leslie, McKillip, Michael Lee, Khan, Sher Jamal, Berger, Chris, Wells, Scott A. Year: 2004 The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all major tributaries (except the Tualatin River where a TMDL process was already concluded). A large section of the Columbia River was also modeled to provide adequate boundary representation of tidal flows in the lower Willamette River. The Willamette River below the Oregon City Falls in the Portland metropolitan area has a typical diurnal tidal range of 1 m. The development of a dynamic model of temperature and hydrodynamics of the entire river basin incorporating shading were primary requirements of this modeling study. The model would be used by DEQ to set temperature limits on point source dischargers and to evaluate the impact of management strategies on river temperatures to improve fish habitat. Some of these strategies included modifications of the dam at the Willamette River Falls south of Portland and channel reconfigurations. Once the models were set-up for each section of the Willamette basin, the model was calibrated to field data and management strategies were evaluated. These are the subjects of two other reports: Annear et al. (2004) and Berger et al. (2004). This report outlines the results of implementing model scenarios for each of the model sections or elements for specific time periods. The model scenario simulation periods used to investigate management scenarios required boundary condition data that extended past the model calibration periods. The model simulation period for year 2001 was from June 1 to October 31 and for year 2002 from April 1 to October 31. Close

• 3. [Article] Willamette River Basin Temperature TMDL Model: Boundary Conditions and Model Setup

  The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all ...

  Citation × Citation Citation Abstract Copy Title: Willamette River Basin Temperature TMDL Model: Boundary Conditions and Model Setup Author: Annear, Robert Leslie, McKillip, Michael Lee, Khan, Sher Jamal, Berger, Chris, Wells, Scott A. Year: 2004 The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all major tributaries (except the Tualatin River where a TMDL process was already concluded). A large section of the Columbia River was also modeled to provide adequate boundary representation of tidal flows in the lower Willamette River. The Willamette River below the Oregon City Falls in the Portland metropolitan area has a typical diurnal tidal range of 1 m. The development of a dynamic model of temperature and hydrodynamics of the entire river basin incorporating shading were primary requirements of this modeling study. The model would be used by DEQ to set temperature limits on point source dischargers and to evaluate the impact of management strategies on river temperatures to improve fish habitat. Some of these strategies included modifications of the dam at the Willamette River Falls south of Portland and channel reconfigurations. Once the models were set-up for each section of the Willamette basin, the model was calibrated to field data and management strategies were evaluated. These are the subjects of two other reports: Annear et al. (2004b) and Berger et al. (2004). This report outlines the model development of each of these model sections or elements for both the calibration time periods and the management scenario time periods. The calibration period for each model section differs due to the availability of boundary condition data. The model simulation periods used to investigate management scenarios (Annear et al, 2004b) also required boundary condition data that extended past the calibration periods. Title: Willamette River Basin Temperature TMDL Model: Boundary Conditions and Model Setup Author: Annear, Robert Leslie, McKillip, Michael Lee, Khan, Sher Jamal, Berger, Chris, Wells, Scott A. Year: 2004 The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all major tributaries (except the Tualatin River where a TMDL process was already concluded). A large section of the Columbia River was also modeled to provide adequate boundary representation of tidal flows in the lower Willamette River. The Willamette River below the Oregon City Falls in the Portland metropolitan area has a typical diurnal tidal range of 1 m. The development of a dynamic model of temperature and hydrodynamics of the entire river basin incorporating shading were primary requirements of this modeling study. The model would be used by DEQ to set temperature limits on point source dischargers and to evaluate the impact of management strategies on river temperatures to improve fish habitat. Some of these strategies included modifications of the dam at the Willamette River Falls south of Portland and channel reconfigurations. Once the models were set-up for each section of the Willamette basin, the model was calibrated to field data and management strategies were evaluated. These are the subjects of two other reports: Annear et al. (2004b) and Berger et al. (2004). This report outlines the model development of each of these model sections or elements for both the calibration time periods and the management scenario time periods. The calibration period for each model section differs due to the availability of boundary condition data. The model simulation periods used to investigate management scenarios (Annear et al, 2004b) also required boundary condition data that extended past the calibration periods. Close

• 4. [Article] Green River CE-QUAL-W2 Project: A Hydrodynamic and Water Quality Study of the Green River King County, Washington

  This report describes the data processing and model calibration performed for a hydrodynamic and water quality model of the Green River, located in King County, Washington. Figure 1 shows the location ...

  Citation × Citation Citation Abstract Copy Title: Green River CE-QUAL-W2 Project: A Hydrodynamic and Water Quality Study of the Green River King County, Washington Author: Kraft, Tim, Annear, Robert Leslie, Berger, Chris, Wells, Scott A. Year: 2004 This report describes the data processing and model calibration performed for a hydrodynamic and water quality model of the Green River, located in King County, Washington. Figure 1 shows the location of the river, and the limits of the section of river that was modeled. The Green River flows from its headwaters in the Cascade Mountain foothills through the King County, Washington communities of Auburn, Kent, and Tukwila before discharging into the Duwamish River. Two sections of the river were modeled in this project. The Middle Green River begins in the Cascade Mountain foothills east of Tacoma, and continues downstream to the city of Auburn, WA. The Lower Green River continues from Auburn to the confluence with the Duwamish River, in the town of Tukwila. The Green/Duwamish River system is unique in that it flows through a heavily urbanized and industrialized environment yet supports a large salmon population (Green/Duwamish Ecosystem Restoration Study, 2003). To protect the river and its prime salmon habitat, King County and the US Army Corps of Engineers have joined together on a study to identify and implement strategies for restoring and protecting the Green/Duwamish River System and its tributaries (Green/Duwamish Ecosystem Restoration Study, 2003). As part of the Green-Duwamish Watershed Water Quality Assessment Program, King County contracted with Portland State University to develop a hydrodynamic and water quality model for the Lower and Middle Green River. This model will be used in Total Maximum Daily Load (TMDL) development, in assessing current water quality conditions in the river, and as a planning tool for evaluating the impacts of future development in the basin. Title: Green River CE-QUAL-W2 Project: A Hydrodynamic and Water Quality Study of the Green River King County, Washington Author: Kraft, Tim, Annear, Robert Leslie, Berger, Chris, Wells, Scott A. Year: 2004 This report describes the data processing and model calibration performed for a hydrodynamic and water quality model of the Green River, located in King County, Washington. Figure 1 shows the location of the river, and the limits of the section of river that was modeled. The Green River flows from its headwaters in the Cascade Mountain foothills through the King County, Washington communities of Auburn, Kent, and Tukwila before discharging into the Duwamish River. Two sections of the river were modeled in this project. The Middle Green River begins in the Cascade Mountain foothills east of Tacoma, and continues downstream to the city of Auburn, WA. The Lower Green River continues from Auburn to the confluence with the Duwamish River, in the town of Tukwila. The Green/Duwamish River system is unique in that it flows through a heavily urbanized and industrialized environment yet supports a large salmon population (Green/Duwamish Ecosystem Restoration Study, 2003). To protect the river and its prime salmon habitat, King County and the US Army Corps of Engineers have joined together on a study to identify and implement strategies for restoring and protecting the Green/Duwamish River System and its tributaries (Green/Duwamish Ecosystem Restoration Study, 2003). As part of the Green-Duwamish Watershed Water Quality Assessment Program, King County contracted with Portland State University to develop a hydrodynamic and water quality model for the Lower and Middle Green River. This model will be used in Total Maximum Daily Load (TMDL) development, in assessing current water quality conditions in the river, and as a planning tool for evaluating the impacts of future development in the basin. Close

• 5. [Article] Willamette River and Columbia River Waste Load Allocation Model

  A hydrodynamic and water quality model of the Lower Willamette River was developed to evaluate management alternatives designed to improve water quality. The Lower Willamette River is located in Oregon ...

  Citation × Citation Citation Abstract Copy Title: Willamette River and Columbia River Waste Load Allocation Model Author: Berger, Chris, Annear, Robert Leslie, Wells, Scott A. Year: 2002 A hydrodynamic and water quality model of the Lower Willamette River was developed to evaluate management alternatives designed to improve water quality. The Lower Willamette River is located in Oregon and drains a watershed covering 11500 square miles consisting of forested, agricultural, and urban lands. Inflows include treated municipal wastes and industrial effluents along with non-point sources from agricultural, silvicultural and urbanized land. The model was designed to address temperature, dissolved oxygen, algae, pH and bacteria concerns. The Corps of Engineers two-dimensional, laterally averaged, hydrodynamic and water quality model CE-QUAL-W2, Version 3 was applied. CE-QUAL-W2 consists of directly coupled hydrodynamic and water quality transport models and simulates parameters such as temperature, algae concentration, dissolved oxygen concentration, pH, nutrient concentrations and residence time. The model domain covers a total of about 126 river miles, including the Lower Willamette River from its intersection with the Columbia River upstream to Canby Ferry (RM 35.0) and the Columbia River from Bonneville Dam (RM 144.5) to Beaver Army Terminal (River Mile 53.8). Modeling of the Columbia River was necessary to simulate tidal fluctuations and influxes of Columbia River water into the Lower Willamette. Major tributaries and major NPDES point sources were point inflows to the system model. The ability to model multiple water bodies was a feature of CE-QUAL-W2 Version 3 and allows the simulation of river, reservoir or estuary sections with varying bottom slopes separated by dams and other hydraulic structures. The model was calibrated for the summers of 1993, 1994, 1997, 1998, and 1999. Hydrodynamics were calibrated first followed by temperature and water quality. Root mean square error of model water level predictions was generally less than 0.05 m. Because of the short residence time within the model domain, the development of accurate boundary conditions was essential for good model calibration. Title: Willamette River and Columbia River Waste Load Allocation Model Author: Berger, Chris, Annear, Robert Leslie, Wells, Scott A. Year: 2002 A hydrodynamic and water quality model of the Lower Willamette River was developed to evaluate management alternatives designed to improve water quality. The Lower Willamette River is located in Oregon and drains a watershed covering 11500 square miles consisting of forested, agricultural, and urban lands. Inflows include treated municipal wastes and industrial effluents along with non-point sources from agricultural, silvicultural and urbanized land. The model was designed to address temperature, dissolved oxygen, algae, pH and bacteria concerns. The Corps of Engineers two-dimensional, laterally averaged, hydrodynamic and water quality model CE-QUAL-W2, Version 3 was applied. CE-QUAL-W2 consists of directly coupled hydrodynamic and water quality transport models and simulates parameters such as temperature, algae concentration, dissolved oxygen concentration, pH, nutrient concentrations and residence time. The model domain covers a total of about 126 river miles, including the Lower Willamette River from its intersection with the Columbia River upstream to Canby Ferry (RM 35.0) and the Columbia River from Bonneville Dam (RM 144.5) to Beaver Army Terminal (River Mile 53.8). Modeling of the Columbia River was necessary to simulate tidal fluctuations and influxes of Columbia River water into the Lower Willamette. Major tributaries and major NPDES point sources were point inflows to the system model. The ability to model multiple water bodies was a feature of CE-QUAL-W2 Version 3 and allows the simulation of river, reservoir or estuary sections with varying bottom slopes separated by dams and other hydraulic structures. The model was calibrated for the summers of 1993, 1994, 1997, 1998, and 1999. Hydrodynamics were calibrated first followed by temperature and water quality. Root mean square error of model water level predictions was generally less than 0.05 m. Because of the short residence time within the model domain, the development of accurate boundary conditions was essential for good model calibration. Close

• 6. [Article] Automatic Calibration of Water Quality and Hydrodynamic Model (CE-QUAL-W2)

  One of the most important purposes of surface water resource management is to develop predictive models to assist in identifying and evaluating operational and structural measures for improving water quality. ...

  Citation × Citation Citation Abstract Copy Title: Automatic Calibration of Water Quality and Hydrodynamic Model (CE-QUAL-W2) Author: Shojaei, Nasim Year: 2014 One of the most important purposes of surface water resource management is to develop predictive models to assist in identifying and evaluating operational and structural measures for improving water quality. To better understand the effects of external and internal nutrient and organic loading and the effects of reservoir operation, a model is often developed, calibrated, and used for sensitivity and management simulations. The importance of modeling and simulation in the scientific community has drawn interest towards methods for automated calibration. This study addresses using an automatic technique to calibrate the water quality model CE-QUAL-W2 (Cole and Wells, 2013). CE-QUAL-W2 is a two-dimensional (2D) longitudinal/vertical hydrodynamic and water quality model for surface water bodies, modeling eutrophication processes such as temperature-nutrient-algae-dissolved oxygen-organic matter and sediment relationships. The numerical method used for calibration in this study is the particle swarm optimization method developed by Kennedy and Eberhart (1995) and inspired by the paradigm of birds flocking. The objective of this calibration procedure is to choose model parameters and coefficients affecting temperature, chlorophyll a, dissolved oxygen, and nutrients (such as NH4, NO3, and PO4). A case study is presented for the Karkheh Reservoir in Iran with a capacity of more than 5 billion cubic meters that is the largest dam in Iran with both agricultural and drinking water usages. This algorithm is shown to perform very well for determining model parameters for the reservoir water quality and hydrodynamic model. Implications of the use of this procedure for other water quality models are also shown. Title: Automatic Calibration of Water Quality and Hydrodynamic Model (CE-QUAL-W2) Author: Shojaei, Nasim Year: 2014 One of the most important purposes of surface water resource management is to develop predictive models to assist in identifying and evaluating operational and structural measures for improving water quality. To better understand the effects of external and internal nutrient and organic loading and the effects of reservoir operation, a model is often developed, calibrated, and used for sensitivity and management simulations. The importance of modeling and simulation in the scientific community has drawn interest towards methods for automated calibration. This study addresses using an automatic technique to calibrate the water quality model CE-QUAL-W2 (Cole and Wells, 2013). CE-QUAL-W2 is a two-dimensional (2D) longitudinal/vertical hydrodynamic and water quality model for surface water bodies, modeling eutrophication processes such as temperature-nutrient-algae-dissolved oxygen-organic matter and sediment relationships. The numerical method used for calibration in this study is the particle swarm optimization method developed by Kennedy and Eberhart (1995) and inspired by the paradigm of birds flocking. The objective of this calibration procedure is to choose model parameters and coefficients affecting temperature, chlorophyll a, dissolved oxygen, and nutrients (such as NH4, NO3, and PO4). A case study is presented for the Karkheh Reservoir in Iran with a capacity of more than 5 billion cubic meters that is the largest dam in Iran with both agricultural and drinking water usages. This algorithm is shown to perform very well for determining model parameters for the reservoir water quality and hydrodynamic model. Implications of the use of this procedure for other water quality models are also shown. Close