Search

Search Results

• 1. [Article] A Comparison of Five Models for Estimating Clear-Sky Solar Radiation

  Many agencies in the USA are developing management approaches to address water quality concerns and threatened and endangered species habitat requirements in water bodies. Many of these water bodies are ...

  Citation × Citation Citation Abstract Copy Title: A Comparison of Five Models for Estimating Clear-Sky Solar Radiation Author: Annear, Robert Leslie, Wells, Scott A. Year: 2007 Many agencies in the USA are developing management approaches to address water quality concerns and threatened and endangered species habitat requirements in water bodies. Many of these water bodies are water quality limited for temperature. Factors influencing stream temperature include: streamside vegetation, topographic shading, inflows and outflows, stream width, stream depth, light extinction and solar radiation. One of the key driving factors in estimating a water body heat budget is calculating the amount of solar radiation incident on the water surface. Even though it is preferable to measure clear-sky solar radiation, many temperature models rely on theoretical estimates of clear-sky solar radiation. The literature on estimating short-wave solar radiation by calculating the position of the sun and attenuating the radiation through the atmosphere was reviewed. As a first step in relating water temperature to solar radiation, several empirical solar radiation models were calibrated to data at seventeen sites around the United States for clear-sky days. Sensitivity analyses were conducted and differences between the models were examined. Results indicated that the more complex models for calculating solar radiation resulted in better estimates of clear-sky solar radiation once they were calibrated to data. When no data were available, models with one or no calibration parameters did reasonably well at estimating clear-sky solar radiation. Title: A Comparison of Five Models for Estimating Clear-Sky Solar Radiation Author: Annear, Robert Leslie, Wells, Scott A. Year: 2007 Many agencies in the USA are developing management approaches to address water quality concerns and threatened and endangered species habitat requirements in water bodies. Many of these water bodies are water quality limited for temperature. Factors influencing stream temperature include: streamside vegetation, topographic shading, inflows and outflows, stream width, stream depth, light extinction and solar radiation. One of the key driving factors in estimating a water body heat budget is calculating the amount of solar radiation incident on the water surface. Even though it is preferable to measure clear-sky solar radiation, many temperature models rely on theoretical estimates of clear-sky solar radiation. The literature on estimating short-wave solar radiation by calculating the position of the sun and attenuating the radiation through the atmosphere was reviewed. As a first step in relating water temperature to solar radiation, several empirical solar radiation models were calibrated to data at seventeen sites around the United States for clear-sky days. Sensitivity analyses were conducted and differences between the models were examined. Results indicated that the more complex models for calculating solar radiation resulted in better estimates of clear-sky solar radiation once they were calibrated to data. When no data were available, models with one or no calibration parameters did reasonably well at estimating clear-sky solar radiation. Close

• 2. [Article] Idaho Pend Oreille River Model: Model Development and Calibration

  The objectives of this project were to: • Develop a hydrodynamic and temperature model of Pend Oreille River using CE-QUAL-W2 Version 3.2 • Calibrate the CE-QUAL-W2 model to field data collected during ...

  Citation × Citation Citation Abstract Copy Title: Idaho Pend Oreille River Model: Model Development and Calibration Author: Annear, Robert Leslie, Berger, Chris, Wells, Scott A. Year: 2006 The objectives of this project were to: • Develop a hydrodynamic and temperature model of Pend Oreille River using CE-QUAL-W2 Version 3.2 • Calibrate the CE-QUAL-W2 model to field data collected during 2004 and 2005 using the following water quality variables: flow, water surface elevation, and velocity temperature o dissolved oxygen nutrients (NO3-N+NO2-N, NH4-N, PO4-P) algae – chlorophyll a BOD5 and dissolved organic matter and particulate organic matter compartments (both labile and refractory) for the organic matter cycling with algae periphyton The model chosen for development was CE-QUAL-W2 Version 3.2 (Cole and Wells, 2004). This is a two-dimensional unsteady hydrodynamic and water quality model that includes typical eutrophication constituents (algae, nutrients, temperature, organic matter, dissolved oxygen, pH). Portland State University’s Water Quality Research Group is a center for development of this modeling tool (see http://www.cee.pdx.edu/w2). The model simulation was run from January 1st, 2004 to September 25th, 2005. The calibration period focused on the summers during each year when water quality data were obtained. Title: Idaho Pend Oreille River Model: Model Development and Calibration Author: Annear, Robert Leslie, Berger, Chris, Wells, Scott A. Year: 2006 The objectives of this project were to: • Develop a hydrodynamic and temperature model of Pend Oreille River using CE-QUAL-W2 Version 3.2 • Calibrate the CE-QUAL-W2 model to field data collected during 2004 and 2005 using the following water quality variables: flow, water surface elevation, and velocity temperature o dissolved oxygen nutrients (NO3-N+NO2-N, NH4-N, PO4-P) algae – chlorophyll a BOD5 and dissolved organic matter and particulate organic matter compartments (both labile and refractory) for the organic matter cycling with algae periphyton The model chosen for development was CE-QUAL-W2 Version 3.2 (Cole and Wells, 2004). This is a two-dimensional unsteady hydrodynamic and water quality model that includes typical eutrophication constituents (algae, nutrients, temperature, organic matter, dissolved oxygen, pH). Portland State University’s Water Quality Research Group is a center for development of this modeling tool (see http://www.cee.pdx.edu/w2). The model simulation was run from January 1st, 2004 to September 25th, 2005. The calibration period focused on the summers during each year when water quality data were obtained. Close

• 3. [Article] Lake Whatcom Water Quality Model

  A water quality model of Lake Whatcom, Washington was developed as part of a Total Maximum Daily Load Study for the Washington Department of Ecology. Lake Whatcom is a large natural lake which is listed ...

  Citation × Citation Citation Abstract Copy Title: Lake Whatcom Water Quality Model Author: Berger, Chris Year: 2005 A water quality model of Lake Whatcom, Washington was developed as part of a Total Maximum Daily Load Study for the Washington Department of Ecology. Lake Whatcom is a large natural lake which is listed on the 1998 Washington State 303(d) list of waterbodies which do not meet the criterion for dissolved oxygen. Located next to the city of Bellingham, it is approximately 10 miles long and has a surface area of approximately 5000 acres and a maximum depth of over 100 meters. Eutrophication processes in the lake have been accelerated in recent years perhaps by the availability of nutrients from tributary discharges to the basin. Many of these tributaries have accelerated their nutrient loading to the system as a result of development in the watershed. The lake is being modeled using the Corps of Engineer’s model CE-QUAL-W2, which is a two-dimensional, hydrodynamic and water quality model. The project is managed by the Washington Department of Ecology which plans to make recommendations for reduction and allocation of pollutant loads. The objectives of this study were then to develop a hydrodynamic and water quality model of Lake Whatcom, calibrate the model to field data collected from February 2002 through December 2003, and use the model to evaluate strategies for water quality improvement. Title: Lake Whatcom Water Quality Model Author: Berger, Chris Year: 2005 A water quality model of Lake Whatcom, Washington was developed as part of a Total Maximum Daily Load Study for the Washington Department of Ecology. Lake Whatcom is a large natural lake which is listed on the 1998 Washington State 303(d) list of waterbodies which do not meet the criterion for dissolved oxygen. Located next to the city of Bellingham, it is approximately 10 miles long and has a surface area of approximately 5000 acres and a maximum depth of over 100 meters. Eutrophication processes in the lake have been accelerated in recent years perhaps by the availability of nutrients from tributary discharges to the basin. Many of these tributaries have accelerated their nutrient loading to the system as a result of development in the watershed. The lake is being modeled using the Corps of Engineer’s model CE-QUAL-W2, which is a two-dimensional, hydrodynamic and water quality model. The project is managed by the Washington Department of Ecology which plans to make recommendations for reduction and allocation of pollutant loads. The objectives of this study were then to develop a hydrodynamic and water quality model of Lake Whatcom, calibrate the model to field data collected from February 2002 through December 2003, and use the model to evaluate strategies for water quality improvement. Close

• 4. [Article] Modeling Effects of Channel Complexity and Hyporheic Flow on Stream Temperatures

  Stream temperatures are affected by multiple forcing functions, including surface heat exchange (including solar radiation, evaporation, conduction, and net long wave radiation) and hyporheic flows. Each ...

  Citation × Citation Citation Abstract Copy Title: Modeling Effects of Channel Complexity and Hyporheic Flow on Stream Temperatures Author: Berger, Chris, Wells, Scott A. Year: 2007 Stream temperatures are affected by multiple forcing functions, including surface heat exchange (including solar radiation, evaporation, conduction, and net long wave radiation) and hyporheic flows. Each of these forcing functions is directly influenced by the level of channel complexity in the stream channel and riparian shading. The interrelationship between channel complexity, hyporheic flow and stream temperature is highly complex, and efforts to manage for habitat diversity by managing channel complexity could result in unintended consequences on stream temperature. When planning modifications to stream channel complexity, consideration should be given to the effects such moderations could have on stream temperatures. Urbanization has impacted many steams due to the construction of bank protections, levees, vegetation removal, etc. Such activities have eliminated side channels and reduced stream braiding, thereby reducing the overall channel complexity. Hulse et al. (2002) developed maps showing the channel configurations of the Willamette River in Oregon, USA in the years 1850 and 1995. These maps show a significant reduction in channel complexity in the intervening years. More complex stream channels provide greater habitat diversity and thus, are generally more desirable from a wildlife management perspective. Therefore, management of streams for increased channel complexity is gaining in popularity. Knowing that stream channel complexity has diminished over time, an important question to consider is ‘what were stream temperatures before we altered the natural channels?’ This is an important issue in determining what natural conditions were and how we have strayed from these so-called ‘natural’ conditions as a result of channelization, dam building, and changes to the riparian vegetation and deforestation. Current Total Maximum Daily Load’s (TMDL) rely on determining a ‘natural’ condition. In order to develop an understanding of what that is, a hydrodynamic and water quality computer simulation model has been applied to Oregon’s Willamette River with several levels of channel complexity and varying rates of hyporheic flows. Adapting the model used to develop TMDL’s for temperature in the Willamette River, the effects of present and past channel complexity on water temperatures was determined. The model used to develop the TMDL was the U. S. Army Corps of Engineers dynamic 2-D model CE-QUAL-W2, which consists of directly coupled hydrodynamic and water quality transport models and simulates parameters such as temperature, algae concentration, dissolved oxygen concentration, pH, nutrient concentrations and residence time. The model also incorporates a dynamic shading algorithm for both vegetative and topographic shading on water bodies. Title: Modeling Effects of Channel Complexity and Hyporheic Flow on Stream Temperatures Author: Berger, Chris, Wells, Scott A. Year: 2007 Stream temperatures are affected by multiple forcing functions, including surface heat exchange (including solar radiation, evaporation, conduction, and net long wave radiation) and hyporheic flows. Each of these forcing functions is directly influenced by the level of channel complexity in the stream channel and riparian shading. The interrelationship between channel complexity, hyporheic flow and stream temperature is highly complex, and efforts to manage for habitat diversity by managing channel complexity could result in unintended consequences on stream temperature. When planning modifications to stream channel complexity, consideration should be given to the effects such moderations could have on stream temperatures. Urbanization has impacted many steams due to the construction of bank protections, levees, vegetation removal, etc. Such activities have eliminated side channels and reduced stream braiding, thereby reducing the overall channel complexity. Hulse et al. (2002) developed maps showing the channel configurations of the Willamette River in Oregon, USA in the years 1850 and 1995. These maps show a significant reduction in channel complexity in the intervening years. More complex stream channels provide greater habitat diversity and thus, are generally more desirable from a wildlife management perspective. Therefore, management of streams for increased channel complexity is gaining in popularity. Knowing that stream channel complexity has diminished over time, an important question to consider is ‘what were stream temperatures before we altered the natural channels?’ This is an important issue in determining what natural conditions were and how we have strayed from these so-called ‘natural’ conditions as a result of channelization, dam building, and changes to the riparian vegetation and deforestation. Current Total Maximum Daily Load’s (TMDL) rely on determining a ‘natural’ condition. In order to develop an understanding of what that is, a hydrodynamic and water quality computer simulation model has been applied to Oregon’s Willamette River with several levels of channel complexity and varying rates of hyporheic flows. Adapting the model used to develop TMDL’s for temperature in the Willamette River, the effects of present and past channel complexity on water temperatures was determined. The model used to develop the TMDL was the U. S. Army Corps of Engineers dynamic 2-D model CE-QUAL-W2, which consists of directly coupled hydrodynamic and water quality transport models and simulates parameters such as temperature, algae concentration, dissolved oxygen concentration, pH, nutrient concentrations and residence time. The model also incorporates a dynamic shading algorithm for both vegetative and topographic shading on water bodies. Close