Search

Search Results

• 1. [Article] Investigations into the Regional and Local Timescale Variations of Subglacial Drainage Networks

  Subglacial water plays an important role in the regulation of an ice sheet's mass balance. It may be the dominant control on the velocities of ice streams and outlet glaciers on scales of months to millennia. ...

  Citation × Citation Citation Abstract Copy Title: Investigations into the Regional and Local Timescale Variations of Subglacial Drainage Networks Author: Hiester, Justin Year: 2013 Subglacial water plays an important role in the regulation of an ice sheet's mass balance. It may be the dominant control on the velocities of ice streams and outlet glaciers on scales of months to millennia. Recent satellite observations of ice surface elevation changes have given researchers new insights into how subglacial water is stored and transported. Localized uplift and settling of the ice surface implies that lakes exist beneath the ice sheet that are being filled and drained on relatively short time scales. %At the base of an ice sheet water can be transported through a variety of drainage networks or stored in subglacial lakes. Here, a numerical investigation of the mechanisms of transport and storage of subglacial water and the associated time scales is presented. Experiments are carried out using a finite element model of coupled ice and water flow. The first experiment seeks to understand the relationship between the depth of a basal depression and the area over which the feature affects basal water flow. It is found that as the perturbation to a topographic depression's depth is increased, water is rerouted in response to the perturbation. Additionally it is found that the relationship between perturbation depth and the extent upstream to which its effects reach is nonlinear. The second experiment examines how the aspect ratio of bed features (prolate, oblate, or equidimensional) influences basal water flow. It is found that the systems that develop and their interactions are mediated by both the topography and the feedbacks taken into account by the coupling of the systems in the model. Features oriented parallel to ice and water flow are associated with distributed fan systems that develop branches which migrate laterally across the domain and interact with one another on monthly and yearly timescales. Laterally oriented features develop laterally extensive ponds. As the ratio of longitudinal to lateral dimension of the topography is increased, a combination of these two water distributions is seen. Title: Investigations into the Regional and Local Timescale Variations of Subglacial Drainage Networks Author: Hiester, Justin Year: 2013 Subglacial water plays an important role in the regulation of an ice sheet's mass balance. It may be the dominant control on the velocities of ice streams and outlet glaciers on scales of months to millennia. Recent satellite observations of ice surface elevation changes have given researchers new insights into how subglacial water is stored and transported. Localized uplift and settling of the ice surface implies that lakes exist beneath the ice sheet that are being filled and drained on relatively short time scales. %At the base of an ice sheet water can be transported through a variety of drainage networks or stored in subglacial lakes. Here, a numerical investigation of the mechanisms of transport and storage of subglacial water and the associated time scales is presented. Experiments are carried out using a finite element model of coupled ice and water flow. The first experiment seeks to understand the relationship between the depth of a basal depression and the area over which the feature affects basal water flow. It is found that as the perturbation to a topographic depression's depth is increased, water is rerouted in response to the perturbation. Additionally it is found that the relationship between perturbation depth and the extent upstream to which its effects reach is nonlinear. The second experiment examines how the aspect ratio of bed features (prolate, oblate, or equidimensional) influences basal water flow. It is found that the systems that develop and their interactions are mediated by both the topography and the feedbacks taken into account by the coupling of the systems in the model. Features oriented parallel to ice and water flow are associated with distributed fan systems that develop branches which migrate laterally across the domain and interact with one another on monthly and yearly timescales. Laterally oriented features develop laterally extensive ponds. As the ratio of longitudinal to lateral dimension of the topography is increased, a combination of these two water distributions is seen. Close

• 2. [Article] Sedimentologic changes in the deposits of an evolving lahar-flood in 2006, Hood River Basin, Mount Hood, Oregon

  Over a span of six days from November 2nd -- 7th, 2006 approximately 43 cm of precipitation fell over the Hood River Basin in Oregon. A lahar was initiated on the Eliot Branch of the Middle Fork Hood River ...

  Citation × Citation Citation Abstract Copy Title: Sedimentologic changes in the deposits of an evolving lahar-flood in 2006, Hood River Basin, Mount Hood, Oregon Author: Poole, Matthew Ray Year: 2016 Over a span of six days from November 2nd -- 7th, 2006 approximately 43 cm of precipitation fell over the Hood River Basin in Oregon. A lahar was initiated on the Eliot Branch of the Middle Fork Hood River by two or more landslides that occurred on the lateral moraines of the Eliot Glacier on the early part of November 7th, 2006. The Eliot Branch lahar was embedded within the larger regional flood that was occurring in the Hood River Basin and traveled a total of 48 km from the initiation points on the north flank of Mount Hood to the Hood Rivers confluence with the Columbia River. The initiating landslides abruptly transformed into a debris flow upon mixing with flood waters of the Eliot Branch. The debris flow traveled a distance of ~28 km at which point it was transformed first to a hyperconcentrated flow and then to water flow via selective deposition of coarse sediment and progressive dilution by channel flow waters from the East and West Fork Hood Rivers. The transformation from debris flow to hyperconcentrated streamflow was recorded by a thickening wedge of hyperconcentrated streamflow sediments found above and below progressively fining debris flow sediments over a reach of 22 km. Finally, the hyperconcentrated-flow phase of the lahar transformed to water flow and then traveled an additional 20 km to the Hood River delta. Upon reaching the apex of the Hood River delta, depositing sediments led to an expansion of the delta. Debris-flow sediments were predominantly gravel (36.0-69.7% by wt.) with sand (22.1-55.9% by wt.) and fines (4.7-7.8% by wt.). Hyperconcentrated flow deposits contained a larger sand fraction of (66.8-99.2% by wt.) with few gravel clasts (0-26.0% by wt.) and fines (0-8.8% by wt.). Water flow deposits averaged 90.5% (wt.) sand with 6.0% (wt.) gravel and 3.0% (wt.) fines. Sorting was a key factor in flow identification and showed progressive improvement downstream from the initiation point. Sorting values for the flow types are as follows: debris flow deposits ranged from 3.3Φ (very poorly sorted) to 1.8Φ (poorly sorted), hyperconcentrated flow deposits ranged from 2.4Φ (very poorly sorted) to 0.8Φ (moderately sorted), and water flood deposits ranged between 1.4Φ (poorly sorted) to 0.6Φ (moderately sorted). Title: Sedimentologic changes in the deposits of an evolving lahar-flood in 2006, Hood River Basin, Mount Hood, Oregon Author: Poole, Matthew Ray Year: 2016 Over a span of six days from November 2nd -- 7th, 2006 approximately 43 cm of precipitation fell over the Hood River Basin in Oregon. A lahar was initiated on the Eliot Branch of the Middle Fork Hood River by two or more landslides that occurred on the lateral moraines of the Eliot Glacier on the early part of November 7th, 2006. The Eliot Branch lahar was embedded within the larger regional flood that was occurring in the Hood River Basin and traveled a total of 48 km from the initiation points on the north flank of Mount Hood to the Hood Rivers confluence with the Columbia River. The initiating landslides abruptly transformed into a debris flow upon mixing with flood waters of the Eliot Branch. The debris flow traveled a distance of ~28 km at which point it was transformed first to a hyperconcentrated flow and then to water flow via selective deposition of coarse sediment and progressive dilution by channel flow waters from the East and West Fork Hood Rivers. The transformation from debris flow to hyperconcentrated streamflow was recorded by a thickening wedge of hyperconcentrated streamflow sediments found above and below progressively fining debris flow sediments over a reach of 22 km. Finally, the hyperconcentrated-flow phase of the lahar transformed to water flow and then traveled an additional 20 km to the Hood River delta. Upon reaching the apex of the Hood River delta, depositing sediments led to an expansion of the delta. Debris-flow sediments were predominantly gravel (36.0-69.7% by wt.) with sand (22.1-55.9% by wt.) and fines (4.7-7.8% by wt.). Hyperconcentrated flow deposits contained a larger sand fraction of (66.8-99.2% by wt.) with few gravel clasts (0-26.0% by wt.) and fines (0-8.8% by wt.). Water flow deposits averaged 90.5% (wt.) sand with 6.0% (wt.) gravel and 3.0% (wt.) fines. Sorting was a key factor in flow identification and showed progressive improvement downstream from the initiation point. Sorting values for the flow types are as follows: debris flow deposits ranged from 3.3Φ (very poorly sorted) to 1.8Φ (poorly sorted), hyperconcentrated flow deposits ranged from 2.4Φ (very poorly sorted) to 0.8Φ (moderately sorted), and water flood deposits ranged between 1.4Φ (poorly sorted) to 0.6Φ (moderately sorted). Close

• 3. [Article] Analysis and numerical simulation of the ground water system at the Bonneville navigation lock site, Oregon

  As part of the new navigation lock for Bonneville Dam a new water source for the Bonneville Fish Hatchery must be supplied. The hatchery is located on the Oregon side of the Columbia River downstream of ...

  Citation × Citation Citation Abstract Copy Title: Analysis and numerical simulation of the ground water system at the Bonneville navigation lock site, Oregon Author: Baron, Dirk Year: 1990 As part of the new navigation lock for Bonneville Dam a new water source for the Bonneville Fish Hatchery must be supplied. The hatchery is located on the Oregon side of the Columbia River downstream of the dam. It requires large quantities of water free from chemical and biological contamination. In addition, the water has to be in a narrow temperature range. Currently the fish hatchery receives its water from a well field that is located on the alluvial terrace downstream of Bonneville Dam. The well field lies in the proposed approach channel for the new lock and has to be abandoned during construction of the lock. For the continued water supply of the hatchery, a new well field will be developed north of the approach channel. Early in the planning phase for the new lock, concerns were raised about the potential impact of the relocation of the well field and the excavation of the new approach channel on the hatchery. To assess these concerns and to assure a continuous water supply during and after construction, a hydrogeologic investigation was initiated. Within the framework of the investigation this study focuses on the analysis of pumping test data and the development of a three-dimensional ground water flow model for the site. Title: Analysis and numerical simulation of the ground water system at the Bonneville navigation lock site, Oregon Author: Baron, Dirk Year: 1990 As part of the new navigation lock for Bonneville Dam a new water source for the Bonneville Fish Hatchery must be supplied. The hatchery is located on the Oregon side of the Columbia River downstream of the dam. It requires large quantities of water free from chemical and biological contamination. In addition, the water has to be in a narrow temperature range. Currently the fish hatchery receives its water from a well field that is located on the alluvial terrace downstream of Bonneville Dam. The well field lies in the proposed approach channel for the new lock and has to be abandoned during construction of the lock. For the continued water supply of the hatchery, a new well field will be developed north of the approach channel. Early in the planning phase for the new lock, concerns were raised about the potential impact of the relocation of the well field and the excavation of the new approach channel on the hatchery. To assess these concerns and to assure a continuous water supply during and after construction, a hydrogeologic investigation was initiated. Within the framework of the investigation this study focuses on the analysis of pumping test data and the development of a three-dimensional ground water flow model for the site. Close

• 4. [Article] 'Sticky spots' and subglacial lakes under ice streams of the Siple Coast, Antarctica

  Locations of subglacial lakes discovered under fast-moving West Antarctic ice streams tend to be associated with topographic features of the subglacial bed or with areas that have strong variations in ...

  Citation × Citation Citation Abstract Copy Title: 'Sticky spots' and subglacial lakes under ice streams of the Siple Coast, Antarctica Author: Sergienko, Olga V., Hulbe, Christina L. Year: 2011 Locations of subglacial lakes discovered under fast-moving West Antarctic ice streams tend to be associated with topographic features of the subglacial bed or with areas that have strong variations in basal conditions. Inversion of ice-stream surface velocity indicates that basal conditions under ice streams can be highly variable and that there can be widespread regions where basal traction is high. To seek an explanation for why lakes appear to be sited near areas with high basal traction, we use numerical models to simulate ice-stream dynamics, thermodynamics and subglacial water flow. We demonstrate that the ice flow over high basal traction areas produces favourable conditions for the ponding of meltwater. Energy dissipation associated with ice sliding over a region with high basal traction constitutes a water source supplying a lake, and ice-thickness perturbations induced by ice flow over variable traction create local minima in hydraulic potential. Variations in thermodynamic processes caused by such ice flow could be responsible for limiting the horizontal extent of the subglacial lakes. Title: 'Sticky spots' and subglacial lakes under ice streams of the Siple Coast, Antarctica Author: Sergienko, Olga V., Hulbe, Christina L. Year: 2011 Locations of subglacial lakes discovered under fast-moving West Antarctic ice streams tend to be associated with topographic features of the subglacial bed or with areas that have strong variations in basal conditions. Inversion of ice-stream surface velocity indicates that basal conditions under ice streams can be highly variable and that there can be widespread regions where basal traction is high. To seek an explanation for why lakes appear to be sited near areas with high basal traction, we use numerical models to simulate ice-stream dynamics, thermodynamics and subglacial water flow. We demonstrate that the ice flow over high basal traction areas produces favourable conditions for the ponding of meltwater. Energy dissipation associated with ice sliding over a region with high basal traction constitutes a water source supplying a lake, and ice-thickness perturbations induced by ice flow over variable traction create local minima in hydraulic potential. Variations in thermodynamic processes caused by such ice flow could be responsible for limiting the horizontal extent of the subglacial lakes. Close

• 5. [Article] A Dynamic Physical Model for Soil Temperature and Water in Taylor Valley, Antarctica

  We developed a simulation model for terrestrial sites including sensible heat exchange between the atmosphere and ground surface, inter- and intra-layer heat conduction by rock and soil, and shortwave ...

  Citation × Citation Citation Abstract Copy Title: A Dynamic Physical Model for Soil Temperature and Water in Taylor Valley, Antarctica Author: Hunt, H. W., Fountain, Andrew G., Doran, Peter T., Basagic, Hassan J. Year: 2010 We developed a simulation model for terrestrial sites including sensible heat exchange between the atmosphere and ground surface, inter- and intra-layer heat conduction by rock and soil, and shortwave and longwave radiation. Water fluxes included snowmelt, freezing/thawing of soil water, soil capillary flow, and vapour flows among atmosphere, soil, and snow. The model accounted for 96-99% of variation in soil temperature data. No long-term temporal trends in soil temperature were apparent. Soil water vapour concentration in thawed surface soil in summer often was higher than in frozen deeper soils, leading to downward vapour fluxes. Katabatic winds caused a reversal of the usual winter pattern of upward vapour fluxes. The model exhibited a steady state depth distribution of soil water due to vapour flows and in the absence of capillary flows below the top 0.5 cm soil layer. Beginning with a completely saturated soil profile, soil water was lost rapidly, and within a few hundred years approached a steady state characterized by dry soil (,0.5% gravimetric) down to one metre depth and saturated soil below that. In contrast, it took 42,000 years to approach steady state beginning from a completely dry initial condition. Title: A Dynamic Physical Model for Soil Temperature and Water in Taylor Valley, Antarctica Author: Hunt, H. W., Fountain, Andrew G., Doran, Peter T., Basagic, Hassan J. Year: 2010 We developed a simulation model for terrestrial sites including sensible heat exchange between the atmosphere and ground surface, inter- and intra-layer heat conduction by rock and soil, and shortwave and longwave radiation. Water fluxes included snowmelt, freezing/thawing of soil water, soil capillary flow, and vapour flows among atmosphere, soil, and snow. The model accounted for 96-99% of variation in soil temperature data. No long-term temporal trends in soil temperature were apparent. Soil water vapour concentration in thawed surface soil in summer often was higher than in frozen deeper soils, leading to downward vapour fluxes. Katabatic winds caused a reversal of the usual winter pattern of upward vapour fluxes. The model exhibited a steady state depth distribution of soil water due to vapour flows and in the absence of capillary flows below the top 0.5 cm soil layer. Beginning with a completely saturated soil profile, soil water was lost rapidly, and within a few hundred years approached a steady state characterized by dry soil (,0.5% gravimetric) down to one metre depth and saturated soil below that. In contrast, it took 42,000 years to approach steady state beginning from a completely dry initial condition. Close

• 6. [Article] Landforms along the Lower Columbia River and the Influence of Humans

  River systems, such as the Columbia River in the Pacific Northwest, USA have been influenced by human activities, resulting in changes to the physical processes that drive landform evolution. This work ...

  Citation × Citation Citation Abstract Copy Title: Landforms along the Lower Columbia River and the Influence of Humans Author: Cannon, Charles Matthew Year: 2015 River systems, such as the Columbia River in the Pacific Northwest, USA have been influenced by human activities, resulting in changes to the physical processes that drive landform evolution. This work describes an inventory of landforms along the Columbia River estuary between the Pacific Ocean and Bonneville Dam in Oregon and Washington. Groupings of landforms are assigned to formative process regimes that are used to assess historical changes to floodplain features. The estuary was historically a complex system of channels with a floodplain dominated by extensive tidal wetlands in the lower reaches and backswamp lakes and wetlands in upper reaches. Natural levees flank most channels in the upper reaches, locally including areas of ridge and swale topography and crevasse splays that intrude into backswamps. Other Holocene process regimes affecting floodplain morphology have included volcanogenic deltas, tributary fans, dunes, and landslides. Pre-Holocene landforms are locally prominent and include ancient fluvial deposits and bedrock. Historical changes to streamflow regimes, floodplain isolation by flood-control systems, and direct anthropogenic disturbance have resulted in channel narrowing and limited the amount of floodplain that can be shaped by flowing water. Floodplain isolation has caused relative subsidence of tidal floodplains along much of the lower estuary. Most extant landforms are on trajectories controlled by humans and new landforms are mostly created by humans. Title: Landforms along the Lower Columbia River and the Influence of Humans Author: Cannon, Charles Matthew Year: 2015 River systems, such as the Columbia River in the Pacific Northwest, USA have been influenced by human activities, resulting in changes to the physical processes that drive landform evolution. This work describes an inventory of landforms along the Columbia River estuary between the Pacific Ocean and Bonneville Dam in Oregon and Washington. Groupings of landforms are assigned to formative process regimes that are used to assess historical changes to floodplain features. The estuary was historically a complex system of channels with a floodplain dominated by extensive tidal wetlands in the lower reaches and backswamp lakes and wetlands in upper reaches. Natural levees flank most channels in the upper reaches, locally including areas of ridge and swale topography and crevasse splays that intrude into backswamps. Other Holocene process regimes affecting floodplain morphology have included volcanogenic deltas, tributary fans, dunes, and landslides. Pre-Holocene landforms are locally prominent and include ancient fluvial deposits and bedrock. Historical changes to streamflow regimes, floodplain isolation by flood-control systems, and direct anthropogenic disturbance have resulted in channel narrowing and limited the amount of floodplain that can be shaped by flowing water. Floodplain isolation has caused relative subsidence of tidal floodplains along much of the lower estuary. Most extant landforms are on trajectories controlled by humans and new landforms are mostly created by humans. Close

• 7. [Article] Hydrogeochemical Characterization of the Alvord Valley Known Geothermal Resources Area, Harney County, Oregon

  The Alvord Valley Known Geothermal Resources Area (KGRA) , located east of the Steens Mountain-Pueblo Mountains fault block in southeastern Oregon, is within the northern Basin and Range province. This ...

  Citation × Citation Citation Abstract Copy Title: Hydrogeochemical Characterization of the Alvord Valley Known Geothermal Resources Area, Harney County, Oregon Author: St. John, Anna Maria Year: 1993 The Alvord Valley Known Geothermal Resources Area (KGRA) , located east of the Steens Mountain-Pueblo Mountains fault block in southeastern Oregon, is within the northern Basin and Range province. This investigation focuses on three thermal areas in the Alvord Basin: Borax Lake and the hot springs north of Borax Lake, Alvord Hot Springs and Mickey Springs. Mickey Springs and the springs north of Borax Lake are boiling at the surface (94 and 95° C, respectively). Inflow temperatures to Borax Lake, measured at a depth of 30 m, are greater than 100° C. Surface temperatures for Alvord Hot Springs and a flowing well northeast of Borax Lake are 78 and 59° C, respectively. Thermal fluids issue from Quaternary lacustrine and alluvial deposits. While silica sinter deposits are present at all three thermal areas, sinter is not presently being deposited. Minor calcite is being deposited at the springs north of Borax Lake. The springs discharge from N to NEstriking, high-angle, basin-bounding faults along the base of Steens Mountain and Mickey Mountain and NE-striking intrabasinal faults south of Alvord Lake. The thermal waters are dilute sodium-bicarbonate waters with significant amounts of sulfate and chloride. Conservative element plots (B, F, and Li vs. Cl) indicate good correlation between Cl and the other conservative elements. These correlations could result from mixing of thermal water with a dilute cold water or fluid evolution due to increased fluid-rock interaction, evaporation, and steam loss due to boiling. The small variations in chloride concentrations of thermal fluids during the sampling period argues against mixing of thermal fluids with cold water. The geothermal system is a hot-water rather than a vapordominated system. The ỎD content of thermal fluids is similar to the ỎD content of local cold water wells, springs, basinal pore fluids at a depth of 4 to 5 m, and perennial streams. Similarities in ỎD values indicate recharge for geothermal fluids is precipitation from the Steens Mountain fault block. The Ỏ18 content of thermal fluids is shifted 2 to 3°/oo to the right of the world meteoric water line indicating fluid-rock interaction at elevated temperatures in the reservoir. Tritium contents indicate relatively long residence times and/or low-velocity circulation of meteoric water through basement rocks. Values range from 0 to 0.25 T.U. The application of two end-member models, which calculate fluid residence times, generate a minimum of 57 years and a maximum of greater than 10,000 years. Estimated reservoir temperatures based on cation and silica geothermometry are between 170 and 200°C. Oxygensulfate isotope geothermometer estimates indicate reservoir temperatures between 198 and 207' C for Borax Lake and Alvord Hot Springs. Mickey Springs and a flowing well northeast of Borax Lake yield temperature estimates of 168 and 150° C, respectively. These values indicate partial reequilibration of the isotopic system. The Ỏ13C contents of carbon dioxide and methane of gas discharges from the thermal areas are similar to geothermal fluids from other sites. The Ỏ13C of methane indicate "normal" geothermal methane for Alvord Hot Springs and Mickey Springs (-27.8 and -27.6, respectively). The Ỏ13C of CH4 for springs north of Borax Lake (-33.6) indicates a small amount of thermogenic methane may be contributed by thermal alteration of organics in basinal sediments. The Ỏ13C contents for C02 at Alvord Hot Springs and Borax Lake are within the range expected for atmospheric, fumarolic, or mantle derived C02 (-6.5 and -6.6, respectively). The Ỏ13C content of C02 from Mickey Springs is isotopically lighter than gas released from fumaroles or the mantle (-9.4). N2/Ar ratios for Mickey Springs and Borax Lake gases (39.2 and 40.8, respectively) indicate interaction with airsaturated ground water during flow through the the zone of aeration. Helium is enriched relative to Ar and N2 in gas discharges from Alvord Hot Springs, indicating longer fluid residence times and/or increased crustal interaction at high temperatures. Ratios of B/Cl indicate the fluid reservoir is hosted in volcanic rocks. The Li/Cs ratios for the Borax Lake thermal area are consistent with a reservoir located in rhyoli tic rocks. The 228Ra/226Ra content of Borax Lake thermal fluids (1.14 ± 0.13 dpm/kg) indicates interaction with volcanic rocks for Borax Lake. The 228Ra/226Ra content of thermal fluids from Alvord Hot Springs and Mickey Springs (0.38~0.02 and 0.17 ~ 0.09) are lower than those expected for volcanic rocks and may indicate local uranium accumulation in the reservoir or zones of upflow. The 87Sr / 86Sr values for thermal waters and stratigraphic uni ts indicate the fluid reservoir is located in volcanic rocks beneath Steens Basalt. Equilibration of fluids in these units argues for thermal water circulation depths of 2 to 2.5 km in the Borax Lake thermal area, greater than 3 km in the Alvord Hot Springs area and 1 to 2 km in the Mickey Springs area. Data presented in this study do not preclude a single large deep reservoir system discharging at these three thermal areas in the Alvord basin. Differences in the chemical and isotopic composition of discharge from the three thermal areas are produced during upf low from the reservoir. During upflow, thermal waters follow a complex pathway of vertical and lateral fractures which includes short residence times in shallow reservoirs before reaching the surface. Boiling, mixing with condensate, oxidation, mixing with 1-3% tritium-bearing, near-surface cold water, relative differences in flow rate and volume, and slow cooling without vigorous boiling are processes that modify fluid composition during upflow from the deep geothermal reservoir. Title: Hydrogeochemical Characterization of the Alvord Valley Known Geothermal Resources Area, Harney County, Oregon Author: St. John, Anna Maria Year: 1993 The Alvord Valley Known Geothermal Resources Area (KGRA) , located east of the Steens Mountain-Pueblo Mountains fault block in southeastern Oregon, is within the northern Basin and Range province. This investigation focuses on three thermal areas in the Alvord Basin: Borax Lake and the hot springs north of Borax Lake, Alvord Hot Springs and Mickey Springs. Mickey Springs and the springs north of Borax Lake are boiling at the surface (94 and 95° C, respectively). Inflow temperatures to Borax Lake, measured at a depth of 30 m, are greater than 100° C. Surface temperatures for Alvord Hot Springs and a flowing well northeast of Borax Lake are 78 and 59° C, respectively. Thermal fluids issue from Quaternary lacustrine and alluvial deposits. While silica sinter deposits are present at all three thermal areas, sinter is not presently being deposited. Minor calcite is being deposited at the springs north of Borax Lake. The springs discharge from N to NEstriking, high-angle, basin-bounding faults along the base of Steens Mountain and Mickey Mountain and NE-striking intrabasinal faults south of Alvord Lake. The thermal waters are dilute sodium-bicarbonate waters with significant amounts of sulfate and chloride. Conservative element plots (B, F, and Li vs. Cl) indicate good correlation between Cl and the other conservative elements. These correlations could result from mixing of thermal water with a dilute cold water or fluid evolution due to increased fluid-rock interaction, evaporation, and steam loss due to boiling. The small variations in chloride concentrations of thermal fluids during the sampling period argues against mixing of thermal fluids with cold water. The geothermal system is a hot-water rather than a vapordominated system. The ỎD content of thermal fluids is similar to the ỎD content of local cold water wells, springs, basinal pore fluids at a depth of 4 to 5 m, and perennial streams. Similarities in ỎD values indicate recharge for geothermal fluids is precipitation from the Steens Mountain fault block. The Ỏ18 content of thermal fluids is shifted 2 to 3°/oo to the right of the world meteoric water line indicating fluid-rock interaction at elevated temperatures in the reservoir. Tritium contents indicate relatively long residence times and/or low-velocity circulation of meteoric water through basement rocks. Values range from 0 to 0.25 T.U. The application of two end-member models, which calculate fluid residence times, generate a minimum of 57 years and a maximum of greater than 10,000 years. Estimated reservoir temperatures based on cation and silica geothermometry are between 170 and 200°C. Oxygensulfate isotope geothermometer estimates indicate reservoir temperatures between 198 and 207' C for Borax Lake and Alvord Hot Springs. Mickey Springs and a flowing well northeast of Borax Lake yield temperature estimates of 168 and 150° C, respectively. These values indicate partial reequilibration of the isotopic system. The Ỏ13C contents of carbon dioxide and methane of gas discharges from the thermal areas are similar to geothermal fluids from other sites. The Ỏ13C of methane indicate "normal" geothermal methane for Alvord Hot Springs and Mickey Springs (-27.8 and -27.6, respectively). The Ỏ13C of CH4 for springs north of Borax Lake (-33.6) indicates a small amount of thermogenic methane may be contributed by thermal alteration of organics in basinal sediments. The Ỏ13C contents for C02 at Alvord Hot Springs and Borax Lake are within the range expected for atmospheric, fumarolic, or mantle derived C02 (-6.5 and -6.6, respectively). The Ỏ13C content of C02 from Mickey Springs is isotopically lighter than gas released from fumaroles or the mantle (-9.4). N2/Ar ratios for Mickey Springs and Borax Lake gases (39.2 and 40.8, respectively) indicate interaction with airsaturated ground water during flow through the the zone of aeration. Helium is enriched relative to Ar and N2 in gas discharges from Alvord Hot Springs, indicating longer fluid residence times and/or increased crustal interaction at high temperatures. Ratios of B/Cl indicate the fluid reservoir is hosted in volcanic rocks. The Li/Cs ratios for the Borax Lake thermal area are consistent with a reservoir located in rhyoli tic rocks. The 228Ra/226Ra content of Borax Lake thermal fluids (1.14 ± 0.13 dpm/kg) indicates interaction with volcanic rocks for Borax Lake. The 228Ra/226Ra content of thermal fluids from Alvord Hot Springs and Mickey Springs (0.38~0.02 and 0.17 ~ 0.09) are lower than those expected for volcanic rocks and may indicate local uranium accumulation in the reservoir or zones of upflow. The 87Sr / 86Sr values for thermal waters and stratigraphic uni ts indicate the fluid reservoir is located in volcanic rocks beneath Steens Basalt. Equilibration of fluids in these units argues for thermal water circulation depths of 2 to 2.5 km in the Borax Lake thermal area, greater than 3 km in the Alvord Hot Springs area and 1 to 2 km in the Mickey Springs area. Data presented in this study do not preclude a single large deep reservoir system discharging at these three thermal areas in the Alvord basin. Differences in the chemical and isotopic composition of discharge from the three thermal areas are produced during upf low from the reservoir. During upflow, thermal waters follow a complex pathway of vertical and lateral fractures which includes short residence times in shallow reservoirs before reaching the surface. Boiling, mixing with condensate, oxidation, mixing with 1-3% tritium-bearing, near-surface cold water, relative differences in flow rate and volume, and slow cooling without vigorous boiling are processes that modify fluid composition during upflow from the deep geothermal reservoir. Close

• 8. [Article] The Morphology of Lava Flows in Planetary Environments: Predictions From Analog Experiments

  The rates of surface cooling and lateral spreading are evaluated for lava flows on the surface of Earth, Venus, Mars, the Moon, and 10. Differences between the flow morphologies expected in these environments ...

  Citation × Citation Citation Abstract Copy Title: The Morphology of Lava Flows in Planetary Environments: Predictions From Analog Experiments Author: Griffiths, Ross W., Fink, Jonathan H. Year: 1992 The rates of surface cooling and lateral spreading are evaluated for lava flows on the surface of Earth, Venus, Mars, the Moon, and 10. Differences between the flow morphologies expected in these environments are then predicted under the assumption that the results of recent laboratory simulations oflavas using wax extruded beneath cold water (Fink and Griffiths, 1990) can be carried over. These experiments involved the spreading of viscous liquid under gravity in the presence of a solidifying surface crust and revealed a set of four distinct surface morphologies. Transitions from one morphology to the next occurred in a well-defined sequence when the relative rates of surface solidification and lateral spreading were varied. In comparison with subaerial flows on Earth, the surface of lavas solidifies faster on Venus, where the dense atmosphere provides additional convective heat transfer. Lateral flow oflava is much slower under the smaller gravity of the Moon. Hence, for a given extrusion rate and viscosity, solid crust is predicted to form closer to the vent on both the Moon and Venus than on Earth. Equivalently, faster extrusion rates than those on Earth are required on the Moon, 10, and Venus in order to produce a given surface morphology. A comparison of observed structure, flow rates, and estimated viscosities for some well-documented terrestrial lava flows shows reasonable agreement with the predictions of the model. Extrapolation to extraterrestrial lavas is then illustrated by constraining the effusion rate for a Martian lava flow whose composition is assumed. Spectral information on the chemical composition of Martian flows to be sought by the thermal emission spectrometer on the Mars Observer mission, in conjunction with detailed morphologic observations from the Mars Observer camera, could allow much more accurate estimates of effusion rates for Martian lavas. Title: The Morphology of Lava Flows in Planetary Environments: Predictions From Analog Experiments Author: Griffiths, Ross W., Fink, Jonathan H. Year: 1992 The rates of surface cooling and lateral spreading are evaluated for lava flows on the surface of Earth, Venus, Mars, the Moon, and 10. Differences between the flow morphologies expected in these environments are then predicted under the assumption that the results of recent laboratory simulations oflavas using wax extruded beneath cold water (Fink and Griffiths, 1990) can be carried over. These experiments involved the spreading of viscous liquid under gravity in the presence of a solidifying surface crust and revealed a set of four distinct surface morphologies. Transitions from one morphology to the next occurred in a well-defined sequence when the relative rates of surface solidification and lateral spreading were varied. In comparison with subaerial flows on Earth, the surface of lavas solidifies faster on Venus, where the dense atmosphere provides additional convective heat transfer. Lateral flow oflava is much slower under the smaller gravity of the Moon. Hence, for a given extrusion rate and viscosity, solid crust is predicted to form closer to the vent on both the Moon and Venus than on Earth. Equivalently, faster extrusion rates than those on Earth are required on the Moon, 10, and Venus in order to produce a given surface morphology. A comparison of observed structure, flow rates, and estimated viscosities for some well-documented terrestrial lava flows shows reasonable agreement with the predictions of the model. Extrapolation to extraterrestrial lavas is then illustrated by constraining the effusion rate for a Martian lava flow whose composition is assumed. Spectral information on the chemical composition of Martian flows to be sought by the thermal emission spectrometer on the Mars Observer mission, in conjunction with detailed morphologic observations from the Mars Observer camera, could allow much more accurate estimates of effusion rates for Martian lavas. Close

• 9. [Article] Investigating the Link Between Surface Water and Groundwater in the Tule Lake Subbasin, Oregon and California

  Water allocation in the upper Klamath Basin of Oregon and California has been challenging. Irrigators have increasingly turned to groundwater to make up for surface water shortages because of shifts in ...

  Citation × Citation Citation Abstract Copy Title: Investigating the Link Between Surface Water and Groundwater in the Tule Lake Subbasin, Oregon and California Author: Pischel, Esther Maria Year: 2014 Water allocation in the upper Klamath Basin of Oregon and California has been challenging. Irrigators have increasingly turned to groundwater to make up for surface water shortages because of shifts in allocation toward in-stream flows for Endangered Species Act listed fishes. The largest increase in groundwater pumping has been in and around the Bureau of Reclamation's Klamath Irrigation Project, which includes the Tule Lake subbasin in the southern part of the upper Klamath Basin. Previous groundwater flow model simulations indicate that water level declines from pumping may result in decreased flow to agricultural drains in the Tule Lake subbasin. Agricultural drains on the Klamath Project are an important source of water for downstream irrigators and for the Tule Lake and Lower Klamath Lake National Wildlife Refuges. To better assess the impact of increased pumping on drain flow and on the water balance of the groundwater system, flow data from agricultural drains were evaluated to investigate the changes that have taken place in groundwater discharge to drains since pumping volumes increased. Additionally, a fine-grid groundwater model of the Tule Lake subbasin was developed based on the existing regional flow model. The fine-grid model has sufficient vertical and horizontal resolution to simulate vertical head gradients, takes advantage of time-series data from 38 observation wells for model calibration, and allows agricultural drains to be more explicitly represented. Results of the drain flow analysis show that the groundwater discharge to agricultural drains has decreased by approximately 4000 hectare-meters from the 1997-2000 average discharge. Most of this decrease takes place in the northern and southeastern portions of the subbasin. Results of the groundwater model show that the initial source of water to wells is groundwater storage. By 2006, approximately 56% of the water from wells is sourced from agricultural drains. Title: Investigating the Link Between Surface Water and Groundwater in the Tule Lake Subbasin, Oregon and California Author: Pischel, Esther Maria Year: 2014 Water allocation in the upper Klamath Basin of Oregon and California has been challenging. Irrigators have increasingly turned to groundwater to make up for surface water shortages because of shifts in allocation toward in-stream flows for Endangered Species Act listed fishes. The largest increase in groundwater pumping has been in and around the Bureau of Reclamation's Klamath Irrigation Project, which includes the Tule Lake subbasin in the southern part of the upper Klamath Basin. Previous groundwater flow model simulations indicate that water level declines from pumping may result in decreased flow to agricultural drains in the Tule Lake subbasin. Agricultural drains on the Klamath Project are an important source of water for downstream irrigators and for the Tule Lake and Lower Klamath Lake National Wildlife Refuges. To better assess the impact of increased pumping on drain flow and on the water balance of the groundwater system, flow data from agricultural drains were evaluated to investigate the changes that have taken place in groundwater discharge to drains since pumping volumes increased. Additionally, a fine-grid groundwater model of the Tule Lake subbasin was developed based on the existing regional flow model. The fine-grid model has sufficient vertical and horizontal resolution to simulate vertical head gradients, takes advantage of time-series data from 38 observation wells for model calibration, and allows agricultural drains to be more explicitly represented. Results of the drain flow analysis show that the groundwater discharge to agricultural drains has decreased by approximately 4000 hectare-meters from the 1997-2000 average discharge. Most of this decrease takes place in the northern and southeastern portions of the subbasin. Results of the groundwater model show that the initial source of water to wells is groundwater storage. By 2006, approximately 56% of the water from wells is sourced from agricultural drains. Close

• 10. [Article] Tributaries to West Antarctic ice Streams: Characteristics Deduced from Numerical Modelling of Ice Flow

  A network of relatively fast-flowing tributaries in the catchment basins of the West Antarctic ice streams transport ice from the inland reservoir to the heads of the ice streams. Branches of the network ...

  Citation × Citation Citation Abstract Copy Title: Tributaries to West Antarctic ice Streams: Characteristics Deduced from Numerical Modelling of Ice Flow Author: Hulbe, Christina L., Joughin, Ian R., Morse, David L., Bindschadler, R. A. Year: 2000 A network of relatively fast-flowing tributaries in the catchment basins of the West Antarctic ice streams transport ice from the inland reservoir to the heads of the ice streams. Branches of the network follow valleys in basal topography, but not all valleys contain tributaries. We investigate the circumstances favoring tributary flow upstream of Ice Streams D and E, using a combination of observation and numerical modelling. No consistent pattern emerges. The transition from tributary to ice-stream flow occurs smoothly along the main tributary feeding into the onset of Ice Stream D, with ice thickness being relatively more important upstream, and sliding being relatively more important downstream. Elsewhere, the downstream pattern of flow is more complicated, with local increases and decreases in the contribution of sliding to ice speed. Those changes may be due to variations in basal water storage, subglacial geologic properties or a combination of the two. Title: Tributaries to West Antarctic ice Streams: Characteristics Deduced from Numerical Modelling of Ice Flow Author: Hulbe, Christina L., Joughin, Ian R., Morse, David L., Bindschadler, R. A. Year: 2000 A network of relatively fast-flowing tributaries in the catchment basins of the West Antarctic ice streams transport ice from the inland reservoir to the heads of the ice streams. Branches of the network follow valleys in basal topography, but not all valleys contain tributaries. We investigate the circumstances favoring tributary flow upstream of Ice Streams D and E, using a combination of observation and numerical modelling. No consistent pattern emerges. The transition from tributary to ice-stream flow occurs smoothly along the main tributary feeding into the onset of Ice Stream D, with ice thickness being relatively more important upstream, and sliding being relatively more important downstream. Elsewhere, the downstream pattern of flow is more complicated, with local increases and decreases in the contribution of sliding to ice speed. Those changes may be due to variations in basal water storage, subglacial geologic properties or a combination of the two. Close