Search

Search Results

• 1. [Image] Stratigraphy and Alteration, 15 Shallow Thermal Gradient Holes, Roosevelt Hot Springs KGRA and Vicinity, Millard and Beaver Counties, Utah

  	Fifteen shallow thermal gradient drill holes were recently completed by Geothermal Power Corporation (GPCR) in the vicinity of the Roosevelt Hot Springs KGRA. Five holes penetrated Tertiary granitic rocks ...
  	Citation × Citation Citation Abstract Copy Title: Stratigraphy and Alteration, 15 Shallow Thermal Gradient Holes, Roosevelt Hot Springs KGRA and Vicinity, Millard and Beaver Counties, Utah Author: Hulen, J.B. Year: 1978 Fifteen shallow thermal gradient drill holes were recently completed by Geothermal Power Corporation (GPCR) in the vicinity of the Roosevelt Hot Springs KGRA. Five holes penetrated Tertiary granitic rocks and Precambrian gneiss east of the KGRA. Seven holes completed entirely in alluvium near the southwestern corner of the KGRA encountered a near-surface marker horizon of Pleistocene pumice and perlite. Maximum calculated alluvial sedimentation rates since initial deposition of this pumice and perlite range from 1 foot in 12,500 years to 1 foot in 2,300 years. Three holes east of the Mineral Mountains penetrated late Cenozoic basaltic andesite beneath a thin veneer of alluvium. All 15 GPCR drill holes appear to be peripheral to a central zone of anomalously high thermal gradient and low resisitivity delineated by previous investigations. GPCR-8 and -14, however, are characterized by high heat flow and relatively abundant manganese oxide mineralization, which may reflect a favorable hydrologic system controlling thermal fluid flow at depth. These holes thus seem most encouraging for discovery of a deeper high-temperature geothermal resource Title: Stratigraphy and Alteration, 15 Shallow Thermal Gradient Holes, Roosevelt Hot Springs KGRA and Vicinity, Millard and Beaver Counties, Utah Author: Hulen, J.B. Year: 1978 Fifteen shallow thermal gradient drill holes were recently completed by Geothermal Power Corporation (GPCR) in the vicinity of the Roosevelt Hot Springs KGRA. Five holes penetrated Tertiary granitic rocks and Precambrian gneiss east of the KGRA. Seven holes completed entirely in alluvium near the southwestern corner of the KGRA encountered a near-surface marker horizon of Pleistocene pumice and perlite. Maximum calculated alluvial sedimentation rates since initial deposition of this pumice and perlite range from 1 foot in 12,500 years to 1 foot in 2,300 years. Three holes east of the Mineral Mountains penetrated late Cenozoic basaltic andesite beneath a thin veneer of alluvium. All 15 GPCR drill holes appear to be peripheral to a central zone of anomalously high thermal gradient and low resisitivity delineated by previous investigations. GPCR-8 and -14, however, are characterized by high heat flow and relatively abundant manganese oxide mineralization, which may reflect a favorable hydrologic system controlling thermal fluid flow at depth. These holes thus seem most encouraging for discovery of a deeper high-temperature geothermal resource Close

• 2. [Image] The 1980-1982 Geothermal Resource Assessment Program in Washington

  	Since 1978, the Division of Geology and Earth Resources of the Washington Department of Natural Resources has participated in the U.S. Department of Energy's (USDOE) StateCoupled Geothermal Resource Program. ...
  	Citation × Citation Citation Abstract Copy Title: The 1980-1982 Geothermal Resource Assessment Program in Washington Author: Korosec, M. A. Year: 1983 Since 1978, the Division of Geology and Earth Resources of the Washington Department of Natural Resources has participated in the U.S. Department of Energy's (USDOE) StateCoupled Geothermal Resource Program. Federal and state funds have been used to investigate and evaluate the potential for geothermal resources, on both a reconnaissance and area-specific level. Preliminary results and progress reports for the period up through mid-1980 have already been released as a Division Open File Report (Korosec, Schuster, and others, 1981). Preliminary results and progress summaries of work carried out from mid-1980 through the end of 1982 are presented in this report Title: The 1980-1982 Geothermal Resource Assessment Program in Washington Author: Korosec, M. A. Year: 1983 Since 1978, the Division of Geology and Earth Resources of the Washington Department of Natural Resources has participated in the U.S. Department of Energy's (USDOE) StateCoupled Geothermal Resource Program. Federal and state funds have been used to investigate and evaluate the potential for geothermal resources, on both a reconnaissance and area-specific level. Preliminary results and progress reports for the period up through mid-1980 have already been released as a Division Open File Report (Korosec, Schuster, and others, 1981). Preliminary results and progress summaries of work carried out from mid-1980 through the end of 1982 are presented in this report Close

• 3. [Article] Geology of the Breitenbush Hot Springs area, Cascade Range, Oregon

  The Breitenbush Hot Springs area lies on the boundary of folded middle to late Tertiary Western Cascade rocks and younger High Cascade rocks. Within the mapped area the Western Cascade rocks are represented ...

  Citation × Citation Citation Abstract Copy Title: Geology of the Breitenbush Hot Springs area, Cascade Range, Oregon Author: Clayton, Clifford Michael Year: 1976 The Breitenbush Hot Springs area lies on the boundary of folded middle to late Tertiary Western Cascade rocks and younger High Cascade rocks. Within the mapped area the Western Cascade rocks are represented by four formations. The Detroit Beds, a sequence of interstratified tuffaceous sandstone, mudflow breccia, and tuff, is overlain unconformably by the Breitenbush Tuff. The Breitenbush Tuff consists of three units of welded pumice-rich crystal-vitric ash-flow tuffs interbedded with tuffaceous sedimentary rocks. The Outerson Formation unconformably overlies the Breitenbush Tuff and consists primarily of basaltic lava and breccia. The Outerson Formation includes three localized members: a basal, glassy, aphanitic basalt, the Lake Leone Sediments, and the Outerson Tuff. The Outerson Formation is cut by a number of feeder dikes and plugs and is unconformably overlain by the Cheat Creek Sediments, composed of volcanic sedimentary rocks and a distinctive basaltic tuff. The Western Cascade formations total more than 1660 m {5500 ft) of strata and range from Oligocene to Pliocene in age. The High Cascade rocks are represented by two formations: the Triangulation Peak Volcanics of basalt and andesite lava and breccia, lying unconformably atop the Cheat Creek Sediments; and unconformably beneath the Collowash Volcanics, a series of thin basaltic lava flows and breccias. The Western and High Cascade rocks are covered extensively by surficial deposits, primarily glacial drift. The High Cascade formations are at least 840 m (2800 ft) thick, ranging in age from Pliocene to Pliestocene. The Western Cascade rocks have been folded and faulted in the Breitenbush Hot Springs area, and form the eastern limb of the north-trending Breitenbush Anticline. The folded rocks and the erosional unconformities between the rock units probably represent two local episodes of orogeny: one in early to middle Miocene and another in late Pliocene to Pleistocene time. The Outerson Formation represents a depositional sequence between the periods of uplift and deformation. Faulting accompanied the orogenic sequences. The primary volcanic landforms in the area have been destroyed by erosion but skeletal remains of High Cascade volcanoes are recognized. Stream erosion and glaciation are responsible for the present landforms. Breitenbush Hot Springs occurs, in part, along basaltic dikes which channel the water through impermeable Breitenbush Tuff. The dikes are believed to be associated with the Outerson basalts. The Hot Springs discharge upwards at 3400 l/min. (900 gpm) of water at temperatures up to 92°C (198°F). Title: Geology of the Breitenbush Hot Springs area, Cascade Range, Oregon Author: Clayton, Clifford Michael Year: 1976 The Breitenbush Hot Springs area lies on the boundary of folded middle to late Tertiary Western Cascade rocks and younger High Cascade rocks. Within the mapped area the Western Cascade rocks are represented by four formations. The Detroit Beds, a sequence of interstratified tuffaceous sandstone, mudflow breccia, and tuff, is overlain unconformably by the Breitenbush Tuff. The Breitenbush Tuff consists of three units of welded pumice-rich crystal-vitric ash-flow tuffs interbedded with tuffaceous sedimentary rocks. The Outerson Formation unconformably overlies the Breitenbush Tuff and consists primarily of basaltic lava and breccia. The Outerson Formation includes three localized members: a basal, glassy, aphanitic basalt, the Lake Leone Sediments, and the Outerson Tuff. The Outerson Formation is cut by a number of feeder dikes and plugs and is unconformably overlain by the Cheat Creek Sediments, composed of volcanic sedimentary rocks and a distinctive basaltic tuff. The Western Cascade formations total more than 1660 m {5500 ft) of strata and range from Oligocene to Pliocene in age. The High Cascade rocks are represented by two formations: the Triangulation Peak Volcanics of basalt and andesite lava and breccia, lying unconformably atop the Cheat Creek Sediments; and unconformably beneath the Collowash Volcanics, a series of thin basaltic lava flows and breccias. The Western and High Cascade rocks are covered extensively by surficial deposits, primarily glacial drift. The High Cascade formations are at least 840 m (2800 ft) thick, ranging in age from Pliocene to Pliestocene. The Western Cascade rocks have been folded and faulted in the Breitenbush Hot Springs area, and form the eastern limb of the north-trending Breitenbush Anticline. The folded rocks and the erosional unconformities between the rock units probably represent two local episodes of orogeny: one in early to middle Miocene and another in late Pliocene to Pleistocene time. The Outerson Formation represents a depositional sequence between the periods of uplift and deformation. Faulting accompanied the orogenic sequences. The primary volcanic landforms in the area have been destroyed by erosion but skeletal remains of High Cascade volcanoes are recognized. Stream erosion and glaciation are responsible for the present landforms. Breitenbush Hot Springs occurs, in part, along basaltic dikes which channel the water through impermeable Breitenbush Tuff. The dikes are believed to be associated with the Outerson basalts. The Hot Springs discharge upwards at 3400 l/min. (900 gpm) of water at temperatures up to 92°C (198°F). Close

• 4. [Article] Quaternary Chronology and Stratigraphy of Mickey Springs, Oregon

  Mickey Springs in the Alvord Desert, southeast Oregon, is analogous to other Basin and Range hydrothermal systems where the requisite conditions of heat source and permeable pathways are met through crustal ...

  Citation × Citation Citation Abstract Copy Title: Quaternary Chronology and Stratigraphy of Mickey Springs, Oregon Author: Mowbray, Leslie Allen Year: 2015 Mickey Springs in the Alvord Desert, southeast Oregon, is analogous to other Basin and Range hydrothermal systems where the requisite conditions of heat source and permeable pathways are met through crustal thinning due to normal faulting. This study examines the morphology and lifespan of near-surface spring features through use of ground penetrating radar, thermoluminescence (TL) dating, and elevation modeling. Duration of hydrothermal activity at Mickey Springs has not previously been determined, and age determinations of sinter at the site are conflicting. The reason for and timing of this change in silica saturation in the hydrothermal fluid has not been resolved. Three morphologies of silica sinter deposition have been identified at Mickey Springs. These are (1) well-sorted, fine-grained sandstone with ripple marks, cross beds and preserved root casts, to poorly-sorted conglomerate of primarily basalt clasts, both cemented by coeval silica deposition, (2) large depressions (12-32 m diameter) rimmed with sinter, characterized by fine silt and clay blanketing a sinter apron and infilling the central depression, and (3) quaquaversal sinter mounds identified by outcropping pool-edge sinter typically surrounding a shallow depression of loose sediment. Silica-cemented sandstone and conglomerate were the first features formed by coeval hydrothermal processes at the site, and were emplaced prior to 30 kya as suggested by structural and stratigraphic relationships. Structure between two interacting fault tips may have constrained the extent of silica cementation. By 30 kya, a left-stepping fault oriented roughly north/south further constrained the near-surface permeable zone. TL dates from sediment stratigraphically below and above sinter aprons around mounds and depressions (former spring vents) indicate sinter deposition between 30 and 20 kya. Location of these features was dictated by development of the left-stepping fault. As pluvial Lake Alvord filled at the end of the Pleistocene, lake sediment filled most vents, which were largely inactive, with fine-grained silt and clay. Today, hydrothermal activity persists in two modes: (1) The current high-temperature springs, steam vents and mudpots concentrated in a 50 x 50 m area south of the sinter mounds and depressions, and (2) scattered springs and steam vents that exploit previous permeable pathways that once provided the hydrothermal fluid which precipitated the sinter aprons. Currently there is no active silica sinter deposition at Mickey Springs. Structures and stratigraphic relationships identified through this study favor a transport-limited and structurally controlled model of fluid transport. Sinter deposition is determined to have occurred before the most recent highstand of pluvial Lake Alvord. A climate driven model, where groundwater recharge from pluvial Lake Alvord circulates to a deep heat source and enhances spring discharge, is not supported by these findings, as no evidence was found for sinter precipitation after the drying of the lake. Future studies of other hydrothermal systems in the Basin and Range may reveal that permeable pathways along local structures are the primary drivers in this region. Title: Quaternary Chronology and Stratigraphy of Mickey Springs, Oregon Author: Mowbray, Leslie Allen Year: 2015 Mickey Springs in the Alvord Desert, southeast Oregon, is analogous to other Basin and Range hydrothermal systems where the requisite conditions of heat source and permeable pathways are met through crustal thinning due to normal faulting. This study examines the morphology and lifespan of near-surface spring features through use of ground penetrating radar, thermoluminescence (TL) dating, and elevation modeling. Duration of hydrothermal activity at Mickey Springs has not previously been determined, and age determinations of sinter at the site are conflicting. The reason for and timing of this change in silica saturation in the hydrothermal fluid has not been resolved. Three morphologies of silica sinter deposition have been identified at Mickey Springs. These are (1) well-sorted, fine-grained sandstone with ripple marks, cross beds and preserved root casts, to poorly-sorted conglomerate of primarily basalt clasts, both cemented by coeval silica deposition, (2) large depressions (12-32 m diameter) rimmed with sinter, characterized by fine silt and clay blanketing a sinter apron and infilling the central depression, and (3) quaquaversal sinter mounds identified by outcropping pool-edge sinter typically surrounding a shallow depression of loose sediment. Silica-cemented sandstone and conglomerate were the first features formed by coeval hydrothermal processes at the site, and were emplaced prior to 30 kya as suggested by structural and stratigraphic relationships. Structure between two interacting fault tips may have constrained the extent of silica cementation. By 30 kya, a left-stepping fault oriented roughly north/south further constrained the near-surface permeable zone. TL dates from sediment stratigraphically below and above sinter aprons around mounds and depressions (former spring vents) indicate sinter deposition between 30 and 20 kya. Location of these features was dictated by development of the left-stepping fault. As pluvial Lake Alvord filled at the end of the Pleistocene, lake sediment filled most vents, which were largely inactive, with fine-grained silt and clay. Today, hydrothermal activity persists in two modes: (1) The current high-temperature springs, steam vents and mudpots concentrated in a 50 x 50 m area south of the sinter mounds and depressions, and (2) scattered springs and steam vents that exploit previous permeable pathways that once provided the hydrothermal fluid which precipitated the sinter aprons. Currently there is no active silica sinter deposition at Mickey Springs. Structures and stratigraphic relationships identified through this study favor a transport-limited and structurally controlled model of fluid transport. Sinter deposition is determined to have occurred before the most recent highstand of pluvial Lake Alvord. A climate driven model, where groundwater recharge from pluvial Lake Alvord circulates to a deep heat source and enhances spring discharge, is not supported by these findings, as no evidence was found for sinter precipitation after the drying of the lake. Future studies of other hydrothermal systems in the Basin and Range may reveal that permeable pathways along local structures are the primary drivers in this region. Close

• 5. [Article] Origins of Late- Pleistocene Coastal Dune Sheets, Magdalena and Guerrero Negro, from Continental Shelf Low-stand Supply (70-20 ka), under Conditions of Southeast Littoral- and Eolian-Sand Transport, in Baja California Sur, Mexico

  Shallow morpho-stratigraphic sections (n = 11) in each of two large coastal dune sheets including the Magdalena (7000 km2) and Guerrero Negro (8000 km2) dune sheets, from the Pacific Ocean side of Baja ...

  Citation × Citation Citation Abstract Copy Title: Origins of Late- Pleistocene Coastal Dune Sheets, Magdalena and Guerrero Negro, from Continental Shelf Low-stand Supply (70-20 ka), under Conditions of Southeast Littoral- and Eolian-Sand Transport, in Baja California Sur, Mexico Author: Peterson, Curt D., Murillo-Jiminez, Janette, Stock, Errol, Price, David M., Hostetler, Steve W., Percy, David Year: 2017 Shallow morpho-stratigraphic sections (n = 11) in each of two large coastal dune sheets including the Magdalena (7000 km2) and Guerrero Negro (8000 km2) dune sheets, from the Pacific Ocean side of Baja California Sur, Mexico, have been analyzed for dune deposit age. The shallow morpho-stratigraphic sections (∼2-10 m depth) include 11 new TL and 14C ages, and paleosol chronosequences, that differentiate cemented late Pleistocene dune deposits (20.7 ± 2.1 to 99.8 ± 9.4 ka) from uncemented Holocene dune deposits (0.7 ± 0.05 to at least 3.2 ± 0.3 ka). Large linear dune ridges (5-10 m in height) in the dune sheet interiors trend southeast and are generally of late Pleistocene age (∼70-20 ka). The late Pleistocene dune deposits reflect eolian transport of marine sand across the emerged continental shelf (30-50 km southeast distance) from low-stand paleo-shorelines (-100 ± 25 m elevation), which were locally oriented nearly orthogonal to modeled deep-water wave directions (∼300° TN). During the Holocene marine transgression, onshore and alongshore wave transport delivered remobilized shelf-sand deposits to the nearshore areas of the large dune sheets, building extensive barrier islands and sand spits. Submerged back-barrier lagoons generally precluded marine sand supply to dune sheet interiors in middle to late Holocene time, though exceptions occur along some ocean and lagoon shorelines. Reactivation of the late Pleistocene dune deposits in the dune sheet interiors lead to generally thin (1-3 m thickness), but widespread, covers of Holocene dune deposits (0.41 ± 0.05 to 10.5 ± 1.6 ka). Mechanical drilling will be required to penetrate indurated subsoil caliche layers to reach basal Pleistocene dune deposits. Title: Origins of Late- Pleistocene Coastal Dune Sheets, Magdalena and Guerrero Negro, from Continental Shelf Low-stand Supply (70-20 ka), under Conditions of Southeast Littoral- and Eolian-Sand Transport, in Baja California Sur, Mexico Author: Peterson, Curt D., Murillo-Jiminez, Janette, Stock, Errol, Price, David M., Hostetler, Steve W., Percy, David Year: 2017 Shallow morpho-stratigraphic sections (n = 11) in each of two large coastal dune sheets including the Magdalena (7000 km2) and Guerrero Negro (8000 km2) dune sheets, from the Pacific Ocean side of Baja California Sur, Mexico, have been analyzed for dune deposit age. The shallow morpho-stratigraphic sections (∼2-10 m depth) include 11 new TL and 14C ages, and paleosol chronosequences, that differentiate cemented late Pleistocene dune deposits (20.7 ± 2.1 to 99.8 ± 9.4 ka) from uncemented Holocene dune deposits (0.7 ± 0.05 to at least 3.2 ± 0.3 ka). Large linear dune ridges (5-10 m in height) in the dune sheet interiors trend southeast and are generally of late Pleistocene age (∼70-20 ka). The late Pleistocene dune deposits reflect eolian transport of marine sand across the emerged continental shelf (30-50 km southeast distance) from low-stand paleo-shorelines (-100 ± 25 m elevation), which were locally oriented nearly orthogonal to modeled deep-water wave directions (∼300° TN). During the Holocene marine transgression, onshore and alongshore wave transport delivered remobilized shelf-sand deposits to the nearshore areas of the large dune sheets, building extensive barrier islands and sand spits. Submerged back-barrier lagoons generally precluded marine sand supply to dune sheet interiors in middle to late Holocene time, though exceptions occur along some ocean and lagoon shorelines. Reactivation of the late Pleistocene dune deposits in the dune sheet interiors lead to generally thin (1-3 m thickness), but widespread, covers of Holocene dune deposits (0.41 ± 0.05 to 10.5 ± 1.6 ka). Mechanical drilling will be required to penetrate indurated subsoil caliche layers to reach basal Pleistocene dune deposits. Close

• 6. [Article] Coastal Eolian Sand-Ramp Development Related to Paleo-Sea-Level Changes during the Latest Pleistocene and Holocene (21–0 ka) in San Miguel Island, California, U.S.A.

  Coastal eolian sand ramps (5–130 m elevation) on the northern slope (windward) side of the small San Miguel Island (13 km in W-E length) range in age from late Pleistocene to modern time, though a major ...

  Citation × Citation Citation Abstract Copy Title: Coastal Eolian Sand-Ramp Development Related to Paleo-Sea-Level Changes during the Latest Pleistocene and Holocene (21–0 ka) in San Miguel Island, California, U.S.A. Author: Peterson, Curt D., Erlandson, Jon M., Stock, Errol, Hostetler, Steve W., Price, David M. Year: 2017 Coastal eolian sand ramps (5–130 m elevation) on the northern slope (windward) side of the small San Miguel Island (13 km in W-E length) range in age from late Pleistocene to modern time, though a major hiatus in sand-ramp growth occurred during the early Holocene marine transgression (16–9 ka). The Holocene sand ramps (1–5 m measured thicknesses) currently lack large dune forms, thereby representing deflated erosional remnants, locally covering thicker late Pleistocene sand-ramp deposits. The ramp sand was initially supplied from the adjacent island-shelf platform, extending about 20 km north of the present coastline. The sand-ramp deposits and interbedded loess soils were 14C dated using 112 samples from 32 archaeological sites and other geologic sections. Latest Pleistocene sand ramps (66–18 ka) were derived from across-shelf eolian sand transport during marine low stands. Shoreward wave transport supplied remobilized late Pleistocene sand from the inner shelf to Holocene beaches, where dominant NW winds supplied sand to the sand ramps. The onset dates of the sand-ramp deposition in San Miguel are 7.2 ± 1.5 ka (sample n = 14). The internal strata dates in the vertically accreting sand ramps are 3.4 ± 1.7 ka (n = 34). The sand ramps in San Miguel show wide-scale termination of sand supply in the latest Holocene time. The sand-ramp top dates or burial dates are 1.7 ± 0.9 ka (n = 28). The latest Holocene sand ramps are truncated along most of the island's northern coastline, indicating recent losses of nearshore sand reserves to onshore, alongshore, and, possibly, offshore sand sinks. The truncated sand ramps in San Miguel Island and in other sand-depleted marine coastlines provide warnings about future beach erosion and/or shoreline retreat from accelerated sea-level rise accompanying predicted global warming. Title: Coastal Eolian Sand-Ramp Development Related to Paleo-Sea-Level Changes during the Latest Pleistocene and Holocene (21–0 ka) in San Miguel Island, California, U.S.A. Author: Peterson, Curt D., Erlandson, Jon M., Stock, Errol, Hostetler, Steve W., Price, David M. Year: 2017 Coastal eolian sand ramps (5–130 m elevation) on the northern slope (windward) side of the small San Miguel Island (13 km in W-E length) range in age from late Pleistocene to modern time, though a major hiatus in sand-ramp growth occurred during the early Holocene marine transgression (16–9 ka). The Holocene sand ramps (1–5 m measured thicknesses) currently lack large dune forms, thereby representing deflated erosional remnants, locally covering thicker late Pleistocene sand-ramp deposits. The ramp sand was initially supplied from the adjacent island-shelf platform, extending about 20 km north of the present coastline. The sand-ramp deposits and interbedded loess soils were 14C dated using 112 samples from 32 archaeological sites and other geologic sections. Latest Pleistocene sand ramps (66–18 ka) were derived from across-shelf eolian sand transport during marine low stands. Shoreward wave transport supplied remobilized late Pleistocene sand from the inner shelf to Holocene beaches, where dominant NW winds supplied sand to the sand ramps. The onset dates of the sand-ramp deposition in San Miguel are 7.2 ± 1.5 ka (sample n = 14). The internal strata dates in the vertically accreting sand ramps are 3.4 ± 1.7 ka (n = 34). The sand ramps in San Miguel show wide-scale termination of sand supply in the latest Holocene time. The sand-ramp top dates or burial dates are 1.7 ± 0.9 ka (n = 28). The latest Holocene sand ramps are truncated along most of the island's northern coastline, indicating recent losses of nearshore sand reserves to onshore, alongshore, and, possibly, offshore sand sinks. The truncated sand ramps in San Miguel Island and in other sand-depleted marine coastlines provide warnings about future beach erosion and/or shoreline retreat from accelerated sea-level rise accompanying predicted global warming. Close

• 7. [Article] Mapping of Unstable and Potentially Unstable Slopes in Sogne og Fjordane

  For the past three years NGU has worked on 25 unstable and potentially unstable rock slopes in Sogn og Fjordane. In addition Fjærlandsfjord, Hyenfjord and Årdalsvatnet were systematically mapped for deposits ...

  Citation × Citation Citation Abstract Copy Title: Mapping of Unstable and Potentially Unstable Slopes in Sogne og Fjordane Author: Hermanns, Reginald L., Fischer, Luzia, Oppikofer, Thierry, Bøhme, M., Dehls, John F., Henriksen, H., Booth, Adam M., Eilertsen, R., Longva, O., Eiken, Trond Year: 2011 For the past three years NGU has worked on 25 unstable and potentially unstable rock slopes in Sogn og Fjordane. In addition Fjærlandsfjord, Hyenfjord and Årdalsvatnet were systematically mapped for deposits of prehistoric and historic rock slope failures onshore and with help of a bathymetry. Mapping on land included structural mapping of ten sites by on-site field mapping and nine sites by remote structural mapping using terrestrial laser scanning technology (TLS). Field work also included periodic monitoring of 14 sites using differential Global Positioning Systems (dGPS) and TLS at 4 sites. Synthetic Aperture Radar was app lied for the entire county but slide velocities could only be mapped out at one locality at Osmundneset (Gloppen municipality). A large amount of work was carried out on the slope east of Flåm in the Aurland valley, and results have been reported separately (NGU 20 11 .025). Three large instabilities have been discovered or taken into the monitoring program. These are Osmundneset in Gloppen municipality, Skrednipa in Sogndal municipality, and the Ovris valley in Vik municipality. The largest movements with 1.5 cm horizontal and 1.5 cm vertical displacement were measured on the instability with a volume of approx. 1 Mm3 in Ovris valley. Opening of cracks has been measured at that site also in the 1960’s, 1970’s and 1980’s. Our data suggest a slight acceleration of this instability. Acceleration was also documented for a 100.000 m3 large instability called Lifjellet, although velocity of that site is less than half of the velocity of the block in Ovris valley. However at that site a collapse of a rockslope with a volume of 25.000 to 30.000 m3 occurred only 19 years ago. Installation of continuous monitoring and early-warning systems should be considered at both of those sites as well as at similar sites where relatively small instabilities that might fail without a long acceleration phase are positioned above settlements (Gråberget in Høyanger municipality). Similarly all other monitored instabilities in Sogn og Fjordane are in the order of mm/yr and not considered to be critical on a short term. However, periodic monitoring has to be continued. Cosmogenic nuclide dating (CN) has been applied to determine ages of rockslide deposits in Fjærlandfjord (Sogne municipality) and at the slope E of Flåm (Aurland community), resulting in Late Pleistocene and Holocene ages. CN dating has also applied to the sliding planes at Skjeringahaugane (Luste municipality). The results indicate that the movement initiated at the beginning of the Holocene and is progressive. Long term slip rates are in the same order of slip rates measured by dGPS. Title: Mapping of Unstable and Potentially Unstable Slopes in Sogne og Fjordane Author: Hermanns, Reginald L., Fischer, Luzia, Oppikofer, Thierry, Bøhme, M., Dehls, John F., Henriksen, H., Booth, Adam M., Eilertsen, R., Longva, O., Eiken, Trond Year: 2011 For the past three years NGU has worked on 25 unstable and potentially unstable rock slopes in Sogn og Fjordane. In addition Fjærlandsfjord, Hyenfjord and Årdalsvatnet were systematically mapped for deposits of prehistoric and historic rock slope failures onshore and with help of a bathymetry. Mapping on land included structural mapping of ten sites by on-site field mapping and nine sites by remote structural mapping using terrestrial laser scanning technology (TLS). Field work also included periodic monitoring of 14 sites using differential Global Positioning Systems (dGPS) and TLS at 4 sites. Synthetic Aperture Radar was app lied for the entire county but slide velocities could only be mapped out at one locality at Osmundneset (Gloppen municipality). A large amount of work was carried out on the slope east of Flåm in the Aurland valley, and results have been reported separately (NGU 20 11 .025). Three large instabilities have been discovered or taken into the monitoring program. These are Osmundneset in Gloppen municipality, Skrednipa in Sogndal municipality, and the Ovris valley in Vik municipality. The largest movements with 1.5 cm horizontal and 1.5 cm vertical displacement were measured on the instability with a volume of approx. 1 Mm3 in Ovris valley. Opening of cracks has been measured at that site also in the 1960’s, 1970’s and 1980’s. Our data suggest a slight acceleration of this instability. Acceleration was also documented for a 100.000 m3 large instability called Lifjellet, although velocity of that site is less than half of the velocity of the block in Ovris valley. However at that site a collapse of a rockslope with a volume of 25.000 to 30.000 m3 occurred only 19 years ago. Installation of continuous monitoring and early-warning systems should be considered at both of those sites as well as at similar sites where relatively small instabilities that might fail without a long acceleration phase are positioned above settlements (Gråberget in Høyanger municipality). Similarly all other monitored instabilities in Sogn og Fjordane are in the order of mm/yr and not considered to be critical on a short term. However, periodic monitoring has to be continued. Cosmogenic nuclide dating (CN) has been applied to determine ages of rockslide deposits in Fjærlandfjord (Sogne municipality) and at the slope E of Flåm (Aurland community), resulting in Late Pleistocene and Holocene ages. CN dating has also applied to the sliding planes at Skjeringahaugane (Luste municipality). The results indicate that the movement initiated at the beginning of the Holocene and is progressive. Long term slip rates are in the same order of slip rates measured by dGPS. Close

• 8. [Article] A Characterization of Lake Abert Tufa Mounds Lake Abert, Oregon

  A series of tufa mounds is found within the northern basin of Lake Abert, located within southeastern Oregon. The mounds have been divided into 3 main groups and 1 sub-group (A1, A2, B, and C) based upon ...

  Citation × Citation Citation Abstract Copy Title: A Characterization of Lake Abert Tufa Mounds Lake Abert, Oregon Author: Bartruff, Anthony Lynn Year: 2013 A series of tufa mounds is found within the northern basin of Lake Abert, located within southeastern Oregon. The mounds have been divided into 3 main groups and 1 sub-group (A1, A2, B, and C) based upon spatial and textural considerations. Mound groups appear at two different elevations: the 1310 meter elevation (Groups A2, B, and C), and the 1318 meter elevation (Group A1). Published carbon age dating of the Lake Abert 1325 meter strandline and the 1310 meter strandline indicates that the mounds were formed during the Late Pleistocene/Early Holocene. Facies analysis and mineralogical analysis of the mounds indicates that the mounds were primarily formed subaqueously during a lake regression, supporting oxygen isotope data from previous researchers. Magnetometer data within Groups A1 and A2 suggests that the mounds are associated with a series of magnetic lows which are oriented in joint sets (NW-SE, and N-S) which match the orientation of faulting within the region. While there appears to be another early mound building episode, no direct evidence confirms this. Title: A Characterization of Lake Abert Tufa Mounds Lake Abert, Oregon Author: Bartruff, Anthony Lynn Year: 2013 A series of tufa mounds is found within the northern basin of Lake Abert, located within southeastern Oregon. The mounds have been divided into 3 main groups and 1 sub-group (A1, A2, B, and C) based upon spatial and textural considerations. Mound groups appear at two different elevations: the 1310 meter elevation (Groups A2, B, and C), and the 1318 meter elevation (Group A1). Published carbon age dating of the Lake Abert 1325 meter strandline and the 1310 meter strandline indicates that the mounds were formed during the Late Pleistocene/Early Holocene. Facies analysis and mineralogical analysis of the mounds indicates that the mounds were primarily formed subaqueously during a lake regression, supporting oxygen isotope data from previous researchers. Magnetometer data within Groups A1 and A2 suggests that the mounds are associated with a series of magnetic lows which are oriented in joint sets (NW-SE, and N-S) which match the orientation of faulting within the region. While there appears to be another early mound building episode, no direct evidence confirms this. Close

• 9. [Article] Ancient Cataclysmic Floods in the Pacific Northwest: Ancestors to the Missoula Floods

  Ancient Cataclysmic Floods were the Ice Age Floods that left erosional and depositional features and preceded the Missoula Floods (15-18,000 ka) in the Pacific Northwest of the United States (Allen et ...

  Citation × Citation Citation Abstract Copy Title: Ancient Cataclysmic Floods in the Pacific Northwest: Ancestors to the Missoula Floods Author: Medley, Erica Year: 2012 Ancient Cataclysmic Floods were the Ice Age Floods that left erosional and depositional features and preceded the Missoula Floods (15-18,000 ka) in the Pacific Northwest of the United States (Allen et al., 2009). All previously studied ancient sites were visited (14) and new sites (11) were found; four Missoula Flood quarries were also visited; a total of 29 sites were studied in this thesis. The use of calcrete paleosols to provide relative age dates for flood deposits was analyzed in this thesis. Missoula Flood gravel pits were sampled in order to examine the degree of calcrete development in flood deposits of known ages. All of the Missoula Flood deposits tested contain Stage 1 calcrete soil development. Calcrete paleosols at sites with evidence for older floods were all analyzed. Eight sites have paleosols with Stage II development (3-12% CaCO3): Rulo Outcrop, Potholes Coulee, Leslie Road, Benge, E. Callaway Road, Collier Coulee, Palouse, and Connell. Five sites have paleosols with Stage II+ development (12-17% CaCO3): Brown Road, Leslie Road, Benge, Reese Coulee, and Connell. Fourteen sites have paleosols with Stage III development (17-35% CaCO3): The Dalles, Rulo Outcrop, Winans Road 1, Poplar Heights, Yakima Bluffs, Canal Outcrop, Othello Canal, Reese Coulee, Potholes Coulee, E. Callaway Road, Frenchmen Coulee, Macall, Ritzville, and East Connell. One site has a paleosol with Stage III+ development (35-50% CaCO3): Othello Canal. Ancient Cataclysmic flooding initiated in the Early Pleistocene, at least 1.5 Ma. Sixteen field sites show evidence for Early Pleistocene flooding, preserved in all six provinces: Othello Channels, Columbia River Gorge, Cheney-Palouse Scabland, Quincy Basin, Pasco Basin, and the Walla Walla Valley. There are 26 field sites with evidence for Middle Pleistocene flooding, present in all regions except Othello Channels. Eleven of those 26 sites also show evidence for Early Pleistocene floods. Evidence for Early and Middle Pleistocene floods is present over a wide distribution of elevations from 117 to 524 meters. Title: Ancient Cataclysmic Floods in the Pacific Northwest: Ancestors to the Missoula Floods Author: Medley, Erica Year: 2012 Ancient Cataclysmic Floods were the Ice Age Floods that left erosional and depositional features and preceded the Missoula Floods (15-18,000 ka) in the Pacific Northwest of the United States (Allen et al., 2009). All previously studied ancient sites were visited (14) and new sites (11) were found; four Missoula Flood quarries were also visited; a total of 29 sites were studied in this thesis. The use of calcrete paleosols to provide relative age dates for flood deposits was analyzed in this thesis. Missoula Flood gravel pits were sampled in order to examine the degree of calcrete development in flood deposits of known ages. All of the Missoula Flood deposits tested contain Stage 1 calcrete soil development. Calcrete paleosols at sites with evidence for older floods were all analyzed. Eight sites have paleosols with Stage II development (3-12% CaCO3): Rulo Outcrop, Potholes Coulee, Leslie Road, Benge, E. Callaway Road, Collier Coulee, Palouse, and Connell. Five sites have paleosols with Stage II+ development (12-17% CaCO3): Brown Road, Leslie Road, Benge, Reese Coulee, and Connell. Fourteen sites have paleosols with Stage III development (17-35% CaCO3): The Dalles, Rulo Outcrop, Winans Road 1, Poplar Heights, Yakima Bluffs, Canal Outcrop, Othello Canal, Reese Coulee, Potholes Coulee, E. Callaway Road, Frenchmen Coulee, Macall, Ritzville, and East Connell. One site has a paleosol with Stage III+ development (35-50% CaCO3): Othello Canal. Ancient Cataclysmic flooding initiated in the Early Pleistocene, at least 1.5 Ma. Sixteen field sites show evidence for Early Pleistocene flooding, preserved in all six provinces: Othello Channels, Columbia River Gorge, Cheney-Palouse Scabland, Quincy Basin, Pasco Basin, and the Walla Walla Valley. There are 26 field sites with evidence for Middle Pleistocene flooding, present in all regions except Othello Channels. Eleven of those 26 sites also show evidence for Early Pleistocene floods. Evidence for Early and Middle Pleistocene floods is present over a wide distribution of elevations from 117 to 524 meters. Close

• 10. [Article] Accommodation Space Controls on the Latest Pleistocene and Holocene (16–0 ka) Sediment Size and Bypassing in the Lower Columbia River Valley: A Large Fluvial–Tidal System in Oregon and Washington, USA

  In this study, we establish the roles that increasing basin accommodation space have on sediment size and bypassing in the transgressive fill (16–0 ka) in the submerged Lower Columbia River Valley (LCRV). ...

  Citation × Citation Citation Abstract Copy Title: Accommodation Space Controls on the Latest Pleistocene and Holocene (16–0 ka) Sediment Size and Bypassing in the Lower Columbia River Valley: A Large Fluvial–Tidal System in Oregon and Washington, USA Author: Peterson, Curt D. Year: 2013 In this study, we establish the roles that increasing basin accommodation space have on sediment size and bypassing in the transgressive fill (16–0 ka) in the submerged Lower Columbia River Valley (LCRV). The antecedent forearc valley (225 km in length, 4–8 km in width, and 60–115 m in axial valley depth) is characterized by high sediment supply rates (10–15 million t y-1) but no delta at its mouth to the Pacific Ocean. Core sample sediment textures (N ¼ 1600) are analyzed from 3000 m of borehole sections in 58 representative boreholes to characterize the ancestral valley fill: 57% sand, 17% muddy sand, 12% sandy mud, and 14% mud (total fill volume¼77 km3). Decreasing mud endmember texture from between 30 and 60% (early Holocene) to 18% (late Holocene) is directly related to (1) declining rates of increasing basin accommodation space and (2) increasing sediment bypassing through the LCRV. Both conditions result from decreasing rates of sea level rise (15.0–1.5 mm y-1) in Holocene time. The overall coarsening of sediments, both upvalley and upsection, is controlled by declining rates of increasing basin accommodation space (5.66 million–0.57 million m3 y-1) during middle to late Holocene time. Differences between middle and late Holocene sediment accumulation rates yield bedload bypassing rates of 5– 6 million m3 y-1, under assumed conditions of constant sediment supply rates in middle to late Holocene time. Title: Accommodation Space Controls on the Latest Pleistocene and Holocene (16–0 ka) Sediment Size and Bypassing in the Lower Columbia River Valley: A Large Fluvial–Tidal System in Oregon and Washington, USA Author: Peterson, Curt D. Year: 2013 In this study, we establish the roles that increasing basin accommodation space have on sediment size and bypassing in the transgressive fill (16–0 ka) in the submerged Lower Columbia River Valley (LCRV). The antecedent forearc valley (225 km in length, 4–8 km in width, and 60–115 m in axial valley depth) is characterized by high sediment supply rates (10–15 million t y-1) but no delta at its mouth to the Pacific Ocean. Core sample sediment textures (N ¼ 1600) are analyzed from 3000 m of borehole sections in 58 representative boreholes to characterize the ancestral valley fill: 57% sand, 17% muddy sand, 12% sandy mud, and 14% mud (total fill volume¼77 km3). Decreasing mud endmember texture from between 30 and 60% (early Holocene) to 18% (late Holocene) is directly related to (1) declining rates of increasing basin accommodation space and (2) increasing sediment bypassing through the LCRV. Both conditions result from decreasing rates of sea level rise (15.0–1.5 mm y-1) in Holocene time. The overall coarsening of sediments, both upvalley and upsection, is controlled by declining rates of increasing basin accommodation space (5.66 million–0.57 million m3 y-1) during middle to late Holocene time. Differences between middle and late Holocene sediment accumulation rates yield bedload bypassing rates of 5– 6 million m3 y-1, under assumed conditions of constant sediment supply rates in middle to late Holocene time. Close