Search

Search Results

• 41. [Article] Shock-Induced Mobilization of Metal and Sulfide in Planetesimals: Evidence From the Buck Mountains 005 (L6 S4) Dike-Bearing Chondrite

  The conditions under which metal cores formed in silicate-metal planetary bodies in the early Solar System are poorly known. We studied the Buck Mountains 005 (L6) chondrite with serial sectioning, X‑ray ...

  Citation × Citation Citation Abstract Copy Title: Shock-Induced Mobilization of Metal and Sulfide in Planetesimals: Evidence From the Buck Mountains 005 (L6 S4) Dike-Bearing Chondrite Author: Ruzicka, Alexander M., Brown, Ryan, Friedrich, Jon, Hutson, Melinda, Hugo, Richard, Rivers, Mark Year: 2015 The conditions under which metal cores formed in silicate-metal planetary bodies in the early Solar System are poorly known. We studied the Buck Mountains 005 (L6) chondrite with serial sectioning, X‑ray computed microtomography, and optical and electron microscopy to better understand how metal and troilite were redistributed as a result of a moderately strong (shock stage S4) shock event, as an example of how collisional processes could have contributed to differentiation. The chondrite was recovered on Earth in multiple small pieces, some of which have a prominent, 1.5-3 mm wide holocrystalline shock melt dike that forms a jointed, sheet-like structure, as well as an associated shock vein network. The data suggest that metal and troilite within the dike were melted, sheared, and transported as small parcels of melt, with metal moving out of the dike and along branching veins to become deposited as coarser nodules and veins within largely unmelted host. Troilite also mobilized but partly separated from metal to become embedded as finer-grained particles, vein networks, and emulsions intimately intergrown with silicates. Rock textures and metal compositions imply that shock melts cooled rapidly against relatively cool parent body materials, but that low-temperature annealing occurred by deep burial within the parent body. Our results demonstrate the ability of shock processes to create larger metal accumulations in substantially unmelted meteorite parent bodies, and they have implications for the formation of iron meteorites and for core formation within colliding planetesimals. Title: Shock-Induced Mobilization of Metal and Sulfide in Planetesimals: Evidence From the Buck Mountains 005 (L6 S4) Dike-Bearing Chondrite Author: Ruzicka, Alexander M., Brown, Ryan, Friedrich, Jon, Hutson, Melinda, Hugo, Richard, Rivers, Mark Year: 2015 The conditions under which metal cores formed in silicate-metal planetary bodies in the early Solar System are poorly known. We studied the Buck Mountains 005 (L6) chondrite with serial sectioning, X‑ray computed microtomography, and optical and electron microscopy to better understand how metal and troilite were redistributed as a result of a moderately strong (shock stage S4) shock event, as an example of how collisional processes could have contributed to differentiation. The chondrite was recovered on Earth in multiple small pieces, some of which have a prominent, 1.5-3 mm wide holocrystalline shock melt dike that forms a jointed, sheet-like structure, as well as an associated shock vein network. The data suggest that metal and troilite within the dike were melted, sheared, and transported as small parcels of melt, with metal moving out of the dike and along branching veins to become deposited as coarser nodules and veins within largely unmelted host. Troilite also mobilized but partly separated from metal to become embedded as finer-grained particles, vein networks, and emulsions intimately intergrown with silicates. Rock textures and metal compositions imply that shock melts cooled rapidly against relatively cool parent body materials, but that low-temperature annealing occurred by deep burial within the parent body. Our results demonstrate the ability of shock processes to create larger metal accumulations in substantially unmelted meteorite parent bodies, and they have implications for the formation of iron meteorites and for core formation within colliding planetesimals. Close

• 42. [Article] Impacts of Permafrost Degradation on a Stream in Taylor Valley, Antarctica

  The McMurdo Dry Valleys (MDV) of Antarctica are an ice-free landscape that supports a complex, microbially dominated ecosystem despite a severely arid, cold environment (< 5 cm water equivalent/y, − 18 ...

  Citation × Citation Citation Abstract Copy Title: Impacts of Permafrost Degradation on a Stream in Taylor Valley, Antarctica Author: Sudman, Zachary, Gooseff, Michael N., Fountain, Andrew G., Levy, Joseph S. Year: 2017 The McMurdo Dry Valleys (MDV) of Antarctica are an ice-free landscape that supports a complex, microbially dominated ecosystem despite a severely arid, cold environment (< 5 cm water equivalent/y, − 18 °C mean annual air temperature). Recent observations of permafrost degradation in the coastal zones of the MDV suggest that this region is nearing a threshold of rapid landscape change. In 2012, substantial thermokarst development was observed along several kilometers of the west branch of Crescent Stream in Taylor Valley mostly in the form of bank failures, whereas the adjacent east branch was unaffected. The objective of this study was to quantify the changes to the stream banks of the west branch of Crescent Stream and to determine the impacts on the composition of the stream bed material. Three annually repeated terrestrial LiDAR scans were compared to determine the rates of ground surface change caused by thermokarst formation on the stream bank. The areal extent of the thermokarst was shown to be decreasing; however, the average vertical rate of retreat remained constant. Field measurements of bed materials indicated that the west branch and the reach downstream of the confluence (of east and west branches) consistently contained more fines than the unaffected east branch. This suggests that the finer bed material is a result of the thermokarst development on the west branch. These finer bed material compositions are likely to increase the mobility of the bed material, which will have implications for stream morphology, stream algal mat communities, and downstream aquatic ecosystems. Title: Impacts of Permafrost Degradation on a Stream in Taylor Valley, Antarctica Author: Sudman, Zachary, Gooseff, Michael N., Fountain, Andrew G., Levy, Joseph S. Year: 2017 The McMurdo Dry Valleys (MDV) of Antarctica are an ice-free landscape that supports a complex, microbially dominated ecosystem despite a severely arid, cold environment (< 5 cm water equivalent/y, − 18 °C mean annual air temperature). Recent observations of permafrost degradation in the coastal zones of the MDV suggest that this region is nearing a threshold of rapid landscape change. In 2012, substantial thermokarst development was observed along several kilometers of the west branch of Crescent Stream in Taylor Valley mostly in the form of bank failures, whereas the adjacent east branch was unaffected. The objective of this study was to quantify the changes to the stream banks of the west branch of Crescent Stream and to determine the impacts on the composition of the stream bed material. Three annually repeated terrestrial LiDAR scans were compared to determine the rates of ground surface change caused by thermokarst formation on the stream bank. The areal extent of the thermokarst was shown to be decreasing; however, the average vertical rate of retreat remained constant. Field measurements of bed materials indicated that the west branch and the reach downstream of the confluence (of east and west branches) consistently contained more fines than the unaffected east branch. This suggests that the finer bed material is a result of the thermokarst development on the west branch. These finer bed material compositions are likely to increase the mobility of the bed material, which will have implications for stream morphology, stream algal mat communities, and downstream aquatic ecosystems. Close

• 43. [Article] Relationships Among Physical Properties as Indicators of High Temperature Deformation or Post-Shock Thermal Annealing in Ordinary Chondrites

  Collisions and attendant shock compaction must have been important for the accretion and lithification of planetesimals, including the parent bodies of chondrites, but the conditions under which these ...

  Citation × Citation Citation Abstract Copy Title: Relationships Among Physical Properties as Indicators of High Temperature Deformation or Post-Shock Thermal Annealing in Ordinary Chondrites Author: Friedrich, John M., Ruzicka, Alex, Macke, Robert J., Thostenson, James O. Year: 2017 Collisions and attendant shock compaction must have been important for the accretion and lithification of planetesimals, including the parent bodies of chondrites, but the conditions under which these occurred are not well constrained. A simple model for the compaction of chondrites predicts that shock intensity as recorded by shock stage should be related to porosity and grain fabric. To test this model, we studied sixteen ordinary chondrites of different groups (H, L, LL) using X-ray computed microtomography (μCT) to measure porosity and metal fabric, ideal gas pycnometry and 3D laser scanning to determine porosity, and optical microscopy (OM) to determine shock stage. These included a subsample of six chondrites previously studied using transmission electron microscopy (TEM) to characterize microstructures in olivine. Combining with previous data, results support the simple model in general, but not for chondrites with low shock-porosity-foliation (low-SPF chondrites). These include Kernouvé (H6), Portales Valley (H6/7), Butsura (H6), Park (L6), GRO 85209 (L6), Estacado (H6), MIL 99301 (LL6), Spade (H6), and Queen's Mercy (H6), among others. The data for these meteorites are best explained by high ambient heat during or after shock. Low-SPF chondrites tend to have older 40Ar/39Ar ages (∼4435–4526 Ma) than other, non-low-SPF type 6 chondrites in this study. We conclude that the H, L, and LL asteroids all were shock-compacted at an early stage while warm, with collisions occurring during metamorphic heating of the parent bodies. Results ultimately bear on whether chondrite parent bodies have internal structures more akin to a metamorphosed onion shell or metamorphosed rubble pile, and on the nature of accretion and lithification processes for planetesimals. © 2017 Elsevier Ltd Title: Relationships Among Physical Properties as Indicators of High Temperature Deformation or Post-Shock Thermal Annealing in Ordinary Chondrites Author: Friedrich, John M., Ruzicka, Alex, Macke, Robert J., Thostenson, James O. Year: 2017 Collisions and attendant shock compaction must have been important for the accretion and lithification of planetesimals, including the parent bodies of chondrites, but the conditions under which these occurred are not well constrained. A simple model for the compaction of chondrites predicts that shock intensity as recorded by shock stage should be related to porosity and grain fabric. To test this model, we studied sixteen ordinary chondrites of different groups (H, L, LL) using X-ray computed microtomography (μCT) to measure porosity and metal fabric, ideal gas pycnometry and 3D laser scanning to determine porosity, and optical microscopy (OM) to determine shock stage. These included a subsample of six chondrites previously studied using transmission electron microscopy (TEM) to characterize microstructures in olivine. Combining with previous data, results support the simple model in general, but not for chondrites with low shock-porosity-foliation (low-SPF chondrites). These include Kernouvé (H6), Portales Valley (H6/7), Butsura (H6), Park (L6), GRO 85209 (L6), Estacado (H6), MIL 99301 (LL6), Spade (H6), and Queen's Mercy (H6), among others. The data for these meteorites are best explained by high ambient heat during or after shock. Low-SPF chondrites tend to have older 40Ar/39Ar ages (∼4435–4526 Ma) than other, non-low-SPF type 6 chondrites in this study. We conclude that the H, L, and LL asteroids all were shock-compacted at an early stage while warm, with collisions occurring during metamorphic heating of the parent bodies. Results ultimately bear on whether chondrite parent bodies have internal structures more akin to a metamorphosed onion shell or metamorphosed rubble pile, and on the nature of accretion and lithification processes for planetesimals. © 2017 Elsevier Ltd Close

• 44. [Article] Decadal Ecosystem Response to an Anomalous Melt Season in a Polar Desert in Antarctica

  Amplified climate change in polar regions is significantly altering regional ecosystems, yet there are few long-term records documenting these responses. The McMurdo Dry Valleys (MDV) cold desert ecosystem ...

  Citation × Citation Citation Abstract Copy Title: Decadal Ecosystem Response to an Anomalous Melt Season in a Polar Desert in Antarctica Author: Gooseff, Michael N., Barrett, John E., Adams, Byron J., Doran, Peter T., Fountain, Andrew J., Lyons, W. Berry, McKnight, Diana M., Priscu, John C., Sokol, Eric R., Takacs-Vesbach, Cristina, Vandegehuchte, Martijn L., Virginia, Ross A., Wall, Diana H. Year: 2017 Amplified climate change in polar regions is significantly altering regional ecosystems, yet there are few long-term records documenting these responses. The McMurdo Dry Valleys (MDV) cold desert ecosystem is the largest ice-free area of Antarctica, comprising soils, glaciers, meltwater streams and permanently ice-covered lakes. Multi-decadal records indicate that the MDV exhibited a distinct ecosystem response to an uncharacteristic austral summer and ensuing climatic shift. A decadal summer cooling phase ended in 2002 with intense glacial melt (‘flood year’)—a step-change in water availability triggering distinct changes in the ecosystem. Before 2002, the ecosystem exhibited synchronous behaviour: declining stream flow, decreasing lake levels, thickening lake ice cover, decreasing primary production in lakes and streams, and diminishing soil secondary production. Since 2002, summer air temperatures and solar flux have been relatively consistent, leading to lake level rise, lake ice thinning and elevated stream flow. Biological responses varied; one stream cyanobacterial mat type immediately increased production, but another stream mat type, soil invertebrates and lake primary productivity responded asynchronously a few years after 2002. This ecosystem response to a climatic anomaly demonstrates differential biological community responses to substantial perturbations, and the mediation of biological responses to climate change by changes in physical ecosystem properties. Title: Decadal Ecosystem Response to an Anomalous Melt Season in a Polar Desert in Antarctica Author: Gooseff, Michael N., Barrett, John E., Adams, Byron J., Doran, Peter T., Fountain, Andrew J., Lyons, W. Berry, McKnight, Diana M., Priscu, John C., Sokol, Eric R., Takacs-Vesbach, Cristina, Vandegehuchte, Martijn L., Virginia, Ross A., Wall, Diana H. Year: 2017 Amplified climate change in polar regions is significantly altering regional ecosystems, yet there are few long-term records documenting these responses. The McMurdo Dry Valleys (MDV) cold desert ecosystem is the largest ice-free area of Antarctica, comprising soils, glaciers, meltwater streams and permanently ice-covered lakes. Multi-decadal records indicate that the MDV exhibited a distinct ecosystem response to an uncharacteristic austral summer and ensuing climatic shift. A decadal summer cooling phase ended in 2002 with intense glacial melt (‘flood year’)—a step-change in water availability triggering distinct changes in the ecosystem. Before 2002, the ecosystem exhibited synchronous behaviour: declining stream flow, decreasing lake levels, thickening lake ice cover, decreasing primary production in lakes and streams, and diminishing soil secondary production. Since 2002, summer air temperatures and solar flux have been relatively consistent, leading to lake level rise, lake ice thinning and elevated stream flow. Biological responses varied; one stream cyanobacterial mat type immediately increased production, but another stream mat type, soil invertebrates and lake primary productivity responded asynchronously a few years after 2002. This ecosystem response to a climatic anomaly demonstrates differential biological community responses to substantial perturbations, and the mediation of biological responses to climate change by changes in physical ecosystem properties. Close

• 45. [Article] Effects of Aerial Exposure on Preservation of Low-Temperature Calothrix Biosignatures in Silica Sinter from Queen's Laundry, Yellowstone National Park, USA

  Mineral-depositing hydrothermal ecosystems, such as the hot springs in Yellowstone National Park, provide an unparalleled opportunity to document how microbial biosignatures form and contribute to the ...

  Citation × Citation Citation Abstract Copy Title: Effects of Aerial Exposure on Preservation of Low-Temperature Calothrix Biosignatures in Silica Sinter from Queen's Laundry, Yellowstone National Park, USA Author: Kendall, Shana Year: 2015 Mineral-depositing hydrothermal ecosystems, such as the hot springs in Yellowstone National Park, provide an unparalleled opportunity to document how microbial biosignatures form and contribute to the body of evidence indicative of the microbial inhabitants of active hot springs. Mineralization of microbial communities in silica-depositing hot springs can result in the preservation of microbial biofacies in the geologic record. To determine the effects of prolonged aerial exposure on the preservation potential of mid-to-low temperature cyanobacteria dominated microbial communities that are typically permineralized in the siliceous sinter, modern biofacies samples of such communities were collected from the active and inactive parts of Queen's Laundry hot spring in Yellowstone National Park. The strategy of the research was to: (1) perform qualitative and quantitative characterization of structural and morphometric attributes of subaqueous and aerially exposed Calothrix biofacies samples collected from terraces; and (2) determine whether prolonged subaerial exposure affected the fidelity of morphological biosignatures (i.e., biofabrics and microbial cells) in the aerially exposed samples. To ensure that the permanently subaqueous and aerially exposed samples were comparable, a protocol developed to describe structural and morphological attributes of stromatolites was utilized to characterize the hot spring samples. Morphometric analysis of both types of Calothrix biofacies samples (i.e., partly silicified subaqueous and aerially exposed samples) revealed the presence of: distinct microbially influenced structures; thicker lamina at or near the base of the terraces; the greatest density of microorganisms in microbial structures; and increased microbial structure flatness as height of the microbial structures within the terrace proper increased. These characteristics were also used to provide a means to interpret the environmental conditions within which the terrace structures developed. To determine whether prolonged subaerial exposure affected the morphological fidelity of the biosignatures in the aerially exposed samples, the microstructure of these samples was studied in detail petrographically. A silica layer defined the boundary between laminae and was referred to as the "capping" silica deposit because it was found to "cap" all of the laminae in the Calothrix biofacies samples. The top most capping silica deposit of the aerially exposed Calothrix biofacies samples was found to be distinctly different from the capping silica deposits in the interior of the same sample and in the partly mineralized subaqueous Calothrix biofacies samples. The aerially exposed capping silica deposit was milky and glassy in appearance and contained fine laminations. The fine laminations were not found in any laminae of the biofacies samples. Another key finding of the project is a new evaluation of the preservation potential of the Calothrix terrace samples. Petrographic observations revealed that preservation of the morphological fidelity of the laminae and the microstructures within them was significantly higher within the microbial shrub and domical structures in both the partially silicified subaqueous and aerially exposed Calothrix biofacies samples than other microstructure types observed. In summary, a detailed morphometric characterization protocol confirmed that it is possible to identify similar features in Calothrix biofacies found inside the active part of the hot spring as well as beyond the perimeter (i.e., aerially exposed for ≥ 3 years) at multiple spatial scales; only the top-most capping silica deposit of the aerially exposed samples is altered by subaerial exposure; the preservation potential for Calothrix biofabrics is highest within shrub and domical structures; and morphometric analysis on a variety of Calothrix terraced structures could lend insight into the factor(s) responsible for terrace formation. This research lays the foundation for analyzing similar structures in geologically older rocks and for recognizing how microbial organisms can and likely have influenced terrace formation. The work also suggests that aerial processes can alter such samples and biosignatures within them. It is recommended that additional non-destructive and spatially correlated analytical methods be considered in the search for chemofossils in the sinter surrounding filaments past and present. Title: Effects of Aerial Exposure on Preservation of Low-Temperature Calothrix Biosignatures in Silica Sinter from Queen's Laundry, Yellowstone National Park, USA Author: Kendall, Shana Year: 2015 Mineral-depositing hydrothermal ecosystems, such as the hot springs in Yellowstone National Park, provide an unparalleled opportunity to document how microbial biosignatures form and contribute to the body of evidence indicative of the microbial inhabitants of active hot springs. Mineralization of microbial communities in silica-depositing hot springs can result in the preservation of microbial biofacies in the geologic record. To determine the effects of prolonged aerial exposure on the preservation potential of mid-to-low temperature cyanobacteria dominated microbial communities that are typically permineralized in the siliceous sinter, modern biofacies samples of such communities were collected from the active and inactive parts of Queen's Laundry hot spring in Yellowstone National Park. The strategy of the research was to: (1) perform qualitative and quantitative characterization of structural and morphometric attributes of subaqueous and aerially exposed Calothrix biofacies samples collected from terraces; and (2) determine whether prolonged subaerial exposure affected the fidelity of morphological biosignatures (i.e., biofabrics and microbial cells) in the aerially exposed samples. To ensure that the permanently subaqueous and aerially exposed samples were comparable, a protocol developed to describe structural and morphological attributes of stromatolites was utilized to characterize the hot spring samples. Morphometric analysis of both types of Calothrix biofacies samples (i.e., partly silicified subaqueous and aerially exposed samples) revealed the presence of: distinct microbially influenced structures; thicker lamina at or near the base of the terraces; the greatest density of microorganisms in microbial structures; and increased microbial structure flatness as height of the microbial structures within the terrace proper increased. These characteristics were also used to provide a means to interpret the environmental conditions within which the terrace structures developed. To determine whether prolonged subaerial exposure affected the morphological fidelity of the biosignatures in the aerially exposed samples, the microstructure of these samples was studied in detail petrographically. A silica layer defined the boundary between laminae and was referred to as the "capping" silica deposit because it was found to "cap" all of the laminae in the Calothrix biofacies samples. The top most capping silica deposit of the aerially exposed Calothrix biofacies samples was found to be distinctly different from the capping silica deposits in the interior of the same sample and in the partly mineralized subaqueous Calothrix biofacies samples. The aerially exposed capping silica deposit was milky and glassy in appearance and contained fine laminations. The fine laminations were not found in any laminae of the biofacies samples. Another key finding of the project is a new evaluation of the preservation potential of the Calothrix terrace samples. Petrographic observations revealed that preservation of the morphological fidelity of the laminae and the microstructures within them was significantly higher within the microbial shrub and domical structures in both the partially silicified subaqueous and aerially exposed Calothrix biofacies samples than other microstructure types observed. In summary, a detailed morphometric characterization protocol confirmed that it is possible to identify similar features in Calothrix biofacies found inside the active part of the hot spring as well as beyond the perimeter (i.e., aerially exposed for ≥ 3 years) at multiple spatial scales; only the top-most capping silica deposit of the aerially exposed samples is altered by subaerial exposure; the preservation potential for Calothrix biofabrics is highest within shrub and domical structures; and morphometric analysis on a variety of Calothrix terraced structures could lend insight into the factor(s) responsible for terrace formation. This research lays the foundation for analyzing similar structures in geologically older rocks and for recognizing how microbial organisms can and likely have influenced terrace formation. The work also suggests that aerial processes can alter such samples and biosignatures within them. It is recommended that additional non-destructive and spatially correlated analytical methods be considered in the search for chemofossils in the sinter surrounding filaments past and present. Close

• 46. [Image] Petrology of the Quaternary Volcanics of the Roosevelt KGRA, and Adjoining Area, Utah. Final Report, Volume 1

  	The Roosevelt KGRA (Known Geothermal Resource Area) located near Milford, Utah, is associated with a suite of quaternary silicic volcanics distributed for 15 km along the crest and western flank of the ...
  	Citation × Citation Citation Abstract Copy Title: Petrology of the Quaternary Volcanics of the Roosevelt KGRA, and Adjoining Area, Utah. Final Report, Volume 1 Author: Nash, W.P. Year: 1976 The Roosevelt KGRA (Known Geothermal Resource Area) located near Milford, Utah, is associated with a suite of quaternary silicic volcanics distributed for 15 km along the crest and western flank of the Mineral Mountains, a large tertiary granite batholith. The volcanics are high-silica rhyolites and occur as domes, flows and tuffs. Initial eruptions resulted in two flows of low viscosity, phenocryst-poor rhyolite. Later activity consisted of pyroclastic eruptions and the emplacement of at least 9 viscous domes. In addition to abundant glass the rhyolites contain alkali feldspar, plagioclase, biotite, iron-titanium oxides and small amounts of hornblende, allanite, apatite, zircon, sphene and topaz. Magmatic temperatures were about 700C and water fugacities ranged from 350 to 3450 bars. Based on water fugacity calculations it is concluded that there may have been one or more shallow magma chambers in the Mineral Range at depths of about 1.6 km. Title: Petrology of the Quaternary Volcanics of the Roosevelt KGRA, and Adjoining Area, Utah. Final Report, Volume 1 Author: Nash, W.P. Year: 1976 The Roosevelt KGRA (Known Geothermal Resource Area) located near Milford, Utah, is associated with a suite of quaternary silicic volcanics distributed for 15 km along the crest and western flank of the Mineral Mountains, a large tertiary granite batholith. The volcanics are high-silica rhyolites and occur as domes, flows and tuffs. Initial eruptions resulted in two flows of low viscosity, phenocryst-poor rhyolite. Later activity consisted of pyroclastic eruptions and the emplacement of at least 9 viscous domes. In addition to abundant glass the rhyolites contain alkali feldspar, plagioclase, biotite, iron-titanium oxides and small amounts of hornblende, allanite, apatite, zircon, sphene and topaz. Magmatic temperatures were about 700C and water fugacities ranged from 350 to 3450 bars. Based on water fugacity calculations it is concluded that there may have been one or more shallow magma chambers in the Mineral Range at depths of about 1.6 km. Close

• 47. [Article] Geology of the Breitenbush Hot Springs area, Cascade Range, Oregon

  The Breitenbush Hot Springs area lies on the boundary of folded middle to late Tertiary Western Cascade rocks and younger High Cascade rocks. Within the mapped area the Western Cascade rocks are represented ...

  Citation × Citation Citation Abstract Copy Title: Geology of the Breitenbush Hot Springs area, Cascade Range, Oregon Author: Clayton, Clifford Michael Year: 1976 The Breitenbush Hot Springs area lies on the boundary of folded middle to late Tertiary Western Cascade rocks and younger High Cascade rocks. Within the mapped area the Western Cascade rocks are represented by four formations. The Detroit Beds, a sequence of interstratified tuffaceous sandstone, mudflow breccia, and tuff, is overlain unconformably by the Breitenbush Tuff. The Breitenbush Tuff consists of three units of welded pumice-rich crystal-vitric ash-flow tuffs interbedded with tuffaceous sedimentary rocks. The Outerson Formation unconformably overlies the Breitenbush Tuff and consists primarily of basaltic lava and breccia. The Outerson Formation includes three localized members: a basal, glassy, aphanitic basalt, the Lake Leone Sediments, and the Outerson Tuff. The Outerson Formation is cut by a number of feeder dikes and plugs and is unconformably overlain by the Cheat Creek Sediments, composed of volcanic sedimentary rocks and a distinctive basaltic tuff. The Western Cascade formations total more than 1660 m {5500 ft) of strata and range from Oligocene to Pliocene in age. The High Cascade rocks are represented by two formations: the Triangulation Peak Volcanics of basalt and andesite lava and breccia, lying unconformably atop the Cheat Creek Sediments; and unconformably beneath the Collowash Volcanics, a series of thin basaltic lava flows and breccias. The Western and High Cascade rocks are covered extensively by surficial deposits, primarily glacial drift. The High Cascade formations are at least 840 m (2800 ft) thick, ranging in age from Pliocene to Pliestocene. The Western Cascade rocks have been folded and faulted in the Breitenbush Hot Springs area, and form the eastern limb of the north-trending Breitenbush Anticline. The folded rocks and the erosional unconformities between the rock units probably represent two local episodes of orogeny: one in early to middle Miocene and another in late Pliocene to Pleistocene time. The Outerson Formation represents a depositional sequence between the periods of uplift and deformation. Faulting accompanied the orogenic sequences. The primary volcanic landforms in the area have been destroyed by erosion but skeletal remains of High Cascade volcanoes are recognized. Stream erosion and glaciation are responsible for the present landforms. Breitenbush Hot Springs occurs, in part, along basaltic dikes which channel the water through impermeable Breitenbush Tuff. The dikes are believed to be associated with the Outerson basalts. The Hot Springs discharge upwards at 3400 l/min. (900 gpm) of water at temperatures up to 92°C (198°F). Title: Geology of the Breitenbush Hot Springs area, Cascade Range, Oregon Author: Clayton, Clifford Michael Year: 1976 The Breitenbush Hot Springs area lies on the boundary of folded middle to late Tertiary Western Cascade rocks and younger High Cascade rocks. Within the mapped area the Western Cascade rocks are represented by four formations. The Detroit Beds, a sequence of interstratified tuffaceous sandstone, mudflow breccia, and tuff, is overlain unconformably by the Breitenbush Tuff. The Breitenbush Tuff consists of three units of welded pumice-rich crystal-vitric ash-flow tuffs interbedded with tuffaceous sedimentary rocks. The Outerson Formation unconformably overlies the Breitenbush Tuff and consists primarily of basaltic lava and breccia. The Outerson Formation includes three localized members: a basal, glassy, aphanitic basalt, the Lake Leone Sediments, and the Outerson Tuff. The Outerson Formation is cut by a number of feeder dikes and plugs and is unconformably overlain by the Cheat Creek Sediments, composed of volcanic sedimentary rocks and a distinctive basaltic tuff. The Western Cascade formations total more than 1660 m {5500 ft) of strata and range from Oligocene to Pliocene in age. The High Cascade rocks are represented by two formations: the Triangulation Peak Volcanics of basalt and andesite lava and breccia, lying unconformably atop the Cheat Creek Sediments; and unconformably beneath the Collowash Volcanics, a series of thin basaltic lava flows and breccias. The Western and High Cascade rocks are covered extensively by surficial deposits, primarily glacial drift. The High Cascade formations are at least 840 m (2800 ft) thick, ranging in age from Pliocene to Pliestocene. The Western Cascade rocks have been folded and faulted in the Breitenbush Hot Springs area, and form the eastern limb of the north-trending Breitenbush Anticline. The folded rocks and the erosional unconformities between the rock units probably represent two local episodes of orogeny: one in early to middle Miocene and another in late Pliocene to Pleistocene time. The Outerson Formation represents a depositional sequence between the periods of uplift and deformation. Faulting accompanied the orogenic sequences. The primary volcanic landforms in the area have been destroyed by erosion but skeletal remains of High Cascade volcanoes are recognized. Stream erosion and glaciation are responsible for the present landforms. Breitenbush Hot Springs occurs, in part, along basaltic dikes which channel the water through impermeable Breitenbush Tuff. The dikes are believed to be associated with the Outerson basalts. The Hot Springs discharge upwards at 3400 l/min. (900 gpm) of water at temperatures up to 92°C (198°F). Close

• 48. [Article] Quaternary Chronology and Stratigraphy of Mickey Springs, Oregon

  Mickey Springs in the Alvord Desert, southeast Oregon, is analogous to other Basin and Range hydrothermal systems where the requisite conditions of heat source and permeable pathways are met through crustal ...

  Citation × Citation Citation Abstract Copy Title: Quaternary Chronology and Stratigraphy of Mickey Springs, Oregon Author: Mowbray, Leslie Allen Year: 2015 Mickey Springs in the Alvord Desert, southeast Oregon, is analogous to other Basin and Range hydrothermal systems where the requisite conditions of heat source and permeable pathways are met through crustal thinning due to normal faulting. This study examines the morphology and lifespan of near-surface spring features through use of ground penetrating radar, thermoluminescence (TL) dating, and elevation modeling. Duration of hydrothermal activity at Mickey Springs has not previously been determined, and age determinations of sinter at the site are conflicting. The reason for and timing of this change in silica saturation in the hydrothermal fluid has not been resolved. Three morphologies of silica sinter deposition have been identified at Mickey Springs. These are (1) well-sorted, fine-grained sandstone with ripple marks, cross beds and preserved root casts, to poorly-sorted conglomerate of primarily basalt clasts, both cemented by coeval silica deposition, (2) large depressions (12-32 m diameter) rimmed with sinter, characterized by fine silt and clay blanketing a sinter apron and infilling the central depression, and (3) quaquaversal sinter mounds identified by outcropping pool-edge sinter typically surrounding a shallow depression of loose sediment. Silica-cemented sandstone and conglomerate were the first features formed by coeval hydrothermal processes at the site, and were emplaced prior to 30 kya as suggested by structural and stratigraphic relationships. Structure between two interacting fault tips may have constrained the extent of silica cementation. By 30 kya, a left-stepping fault oriented roughly north/south further constrained the near-surface permeable zone. TL dates from sediment stratigraphically below and above sinter aprons around mounds and depressions (former spring vents) indicate sinter deposition between 30 and 20 kya. Location of these features was dictated by development of the left-stepping fault. As pluvial Lake Alvord filled at the end of the Pleistocene, lake sediment filled most vents, which were largely inactive, with fine-grained silt and clay. Today, hydrothermal activity persists in two modes: (1) The current high-temperature springs, steam vents and mudpots concentrated in a 50 x 50 m area south of the sinter mounds and depressions, and (2) scattered springs and steam vents that exploit previous permeable pathways that once provided the hydrothermal fluid which precipitated the sinter aprons. Currently there is no active silica sinter deposition at Mickey Springs. Structures and stratigraphic relationships identified through this study favor a transport-limited and structurally controlled model of fluid transport. Sinter deposition is determined to have occurred before the most recent highstand of pluvial Lake Alvord. A climate driven model, where groundwater recharge from pluvial Lake Alvord circulates to a deep heat source and enhances spring discharge, is not supported by these findings, as no evidence was found for sinter precipitation after the drying of the lake. Future studies of other hydrothermal systems in the Basin and Range may reveal that permeable pathways along local structures are the primary drivers in this region. Title: Quaternary Chronology and Stratigraphy of Mickey Springs, Oregon Author: Mowbray, Leslie Allen Year: 2015 Mickey Springs in the Alvord Desert, southeast Oregon, is analogous to other Basin and Range hydrothermal systems where the requisite conditions of heat source and permeable pathways are met through crustal thinning due to normal faulting. This study examines the morphology and lifespan of near-surface spring features through use of ground penetrating radar, thermoluminescence (TL) dating, and elevation modeling. Duration of hydrothermal activity at Mickey Springs has not previously been determined, and age determinations of sinter at the site are conflicting. The reason for and timing of this change in silica saturation in the hydrothermal fluid has not been resolved. Three morphologies of silica sinter deposition have been identified at Mickey Springs. These are (1) well-sorted, fine-grained sandstone with ripple marks, cross beds and preserved root casts, to poorly-sorted conglomerate of primarily basalt clasts, both cemented by coeval silica deposition, (2) large depressions (12-32 m diameter) rimmed with sinter, characterized by fine silt and clay blanketing a sinter apron and infilling the central depression, and (3) quaquaversal sinter mounds identified by outcropping pool-edge sinter typically surrounding a shallow depression of loose sediment. Silica-cemented sandstone and conglomerate were the first features formed by coeval hydrothermal processes at the site, and were emplaced prior to 30 kya as suggested by structural and stratigraphic relationships. Structure between two interacting fault tips may have constrained the extent of silica cementation. By 30 kya, a left-stepping fault oriented roughly north/south further constrained the near-surface permeable zone. TL dates from sediment stratigraphically below and above sinter aprons around mounds and depressions (former spring vents) indicate sinter deposition between 30 and 20 kya. Location of these features was dictated by development of the left-stepping fault. As pluvial Lake Alvord filled at the end of the Pleistocene, lake sediment filled most vents, which were largely inactive, with fine-grained silt and clay. Today, hydrothermal activity persists in two modes: (1) The current high-temperature springs, steam vents and mudpots concentrated in a 50 x 50 m area south of the sinter mounds and depressions, and (2) scattered springs and steam vents that exploit previous permeable pathways that once provided the hydrothermal fluid which precipitated the sinter aprons. Currently there is no active silica sinter deposition at Mickey Springs. Structures and stratigraphic relationships identified through this study favor a transport-limited and structurally controlled model of fluid transport. Sinter deposition is determined to have occurred before the most recent highstand of pluvial Lake Alvord. A climate driven model, where groundwater recharge from pluvial Lake Alvord circulates to a deep heat source and enhances spring discharge, is not supported by these findings, as no evidence was found for sinter precipitation after the drying of the lake. Future studies of other hydrothermal systems in the Basin and Range may reveal that permeable pathways along local structures are the primary drivers in this region. Close

• 49. [Article] Compositional and Physical Gradients in the Magmas of the Devine Canyon Tuff, Eastern Oregon: Constraints for Evolution Models of Voluminous High-silica Rhyolites

  Large-volume silicic ignimbrites erupt from reservoirs that vary in composition, temperature, volatile content and crystallinity. The 9.7 Ma Devine Canyon Tuff (DCT) of eastern Oregon is a large-volume ...

  Citation × Citation Citation Abstract Copy Title: Compositional and Physical Gradients in the Magmas of the Devine Canyon Tuff, Eastern Oregon: Constraints for Evolution Models of Voluminous High-silica Rhyolites Author: Isom, Shelby Lee Year: 2017 Large-volume silicic ignimbrites erupt from reservoirs that vary in composition, temperature, volatile content and crystallinity. The 9.7 Ma Devine Canyon Tuff (DCT) of eastern Oregon is a large-volume (>250 km3), compositionally zoned and variably welded ignimbrite. The ignimbrite exhibits heterogeneous trace element compositions, variable volatile content and crystallinity. These observations were utilized in the investigation into the generation, accumulation and evolution of the magmas composing the DCT. Building off previous research, pumices were selected from the range of trace element compositions and analyzed with respect to crystallinity, mineral abundances and assemblages. The DCT displays a gradational trace element enrichment and decrease in crystallinity from least evolved, dacite, at ~22% crystals to most evolved high-silica rhyolite at 3% crystals. Two distinct mineral populations of feldspar and clinopyroxene were identified in previous work, one belonging to the rhyolitic magma and the other to the dacitic magma. Volatile content derived from melt inclusion Fourier Transform Infrared (FTIR) spectrometer analysis revealed an increase in water content from 1.2 to 3.7 wt.% in the most evolved rhyolite. The DCT exhibits low and variable δ18O signatures, 4.52% to 5.76%, based on δ18O values measured on quartz and sanidine. Low δ18O signatures of all DCT rhyolites suggest the incorporation of hydrothermally altered crust into the melt. Furthermore, quartz phenocrysts from all high-silica rhyolite groups display dark oscillatory zoned cores and Ti-rich bright rims. These data provide insight into how these magmas were generated and subsequently stored in the crust. Commonalities of petrographic and compositional features among rhyolites, especially the zoning characteristics of quartz phenocrysts, exclude the possibility of storage and evolution in multiple reservoirs. Envisioning a scenario where all magmas are stored within a single reservoir prior to eruption and assuming rhyolites A and D are the product of partial melting. The mixing of A and D rhyolites produced rhyolite B, and subsequent mixing of intermediate rhyolite B and end-member rhyolite D generated rhyolite C. However, some trace element inconsistencies, between mixing model and observed intermediate rhyolites suggest a secondary process. Post mixing, rhyolites B and C require some modification by fractional crystallization to account for LREE and other inconsistencies between mixed models and observed rhyolites. Finally, the origin of the dacite is likely through mixing of group D rhyolite and an intrusive fractionated basalt, which could have led to the eruption of the Devine Canyon Tuff. Title: Compositional and Physical Gradients in the Magmas of the Devine Canyon Tuff, Eastern Oregon: Constraints for Evolution Models of Voluminous High-silica Rhyolites Author: Isom, Shelby Lee Year: 2017 Large-volume silicic ignimbrites erupt from reservoirs that vary in composition, temperature, volatile content and crystallinity. The 9.7 Ma Devine Canyon Tuff (DCT) of eastern Oregon is a large-volume (>250 km3), compositionally zoned and variably welded ignimbrite. The ignimbrite exhibits heterogeneous trace element compositions, variable volatile content and crystallinity. These observations were utilized in the investigation into the generation, accumulation and evolution of the magmas composing the DCT. Building off previous research, pumices were selected from the range of trace element compositions and analyzed with respect to crystallinity, mineral abundances and assemblages. The DCT displays a gradational trace element enrichment and decrease in crystallinity from least evolved, dacite, at ~22% crystals to most evolved high-silica rhyolite at 3% crystals. Two distinct mineral populations of feldspar and clinopyroxene were identified in previous work, one belonging to the rhyolitic magma and the other to the dacitic magma. Volatile content derived from melt inclusion Fourier Transform Infrared (FTIR) spectrometer analysis revealed an increase in water content from 1.2 to 3.7 wt.% in the most evolved rhyolite. The DCT exhibits low and variable δ18O signatures, 4.52% to 5.76%, based on δ18O values measured on quartz and sanidine. Low δ18O signatures of all DCT rhyolites suggest the incorporation of hydrothermally altered crust into the melt. Furthermore, quartz phenocrysts from all high-silica rhyolite groups display dark oscillatory zoned cores and Ti-rich bright rims. These data provide insight into how these magmas were generated and subsequently stored in the crust. Commonalities of petrographic and compositional features among rhyolites, especially the zoning characteristics of quartz phenocrysts, exclude the possibility of storage and evolution in multiple reservoirs. Envisioning a scenario where all magmas are stored within a single reservoir prior to eruption and assuming rhyolites A and D are the product of partial melting. The mixing of A and D rhyolites produced rhyolite B, and subsequent mixing of intermediate rhyolite B and end-member rhyolite D generated rhyolite C. However, some trace element inconsistencies, between mixing model and observed intermediate rhyolites suggest a secondary process. Post mixing, rhyolites B and C require some modification by fractional crystallization to account for LREE and other inconsistencies between mixed models and observed rhyolites. Finally, the origin of the dacite is likely through mixing of group D rhyolite and an intrusive fractionated basalt, which could have led to the eruption of the Devine Canyon Tuff. Close

• 50. [Article] Hydrogeologic Characterization of Dutch Canyon, Scappoose, Oregon

  Dutch Canyon is located directly west of the City of Scappoose in Columbia County Oregon. This area is proximate to Highway 30, a major access corridor to downtown Portland, and is experiencing a population ...

  Citation × Citation Citation Abstract Copy Title: Hydrogeologic Characterization of Dutch Canyon, Scappoose, Oregon Author: Wagner, Derrick Lee Year: 2013 Dutch Canyon is located directly west of the City of Scappoose in Columbia County Oregon. This area is proximate to Highway 30, a major access corridor to downtown Portland, and is experiencing a population increase, which is expected to continue and likely accelerate. As a result, there is growing pressure on water resources. Individual and community efforts to utilize groundwater resources have been hampered by generally poor groundwater yields and water quality concerns outside of the Columbia River corridor and a lack of published hydrogeologic information for the region. The intent of this study is to identify the water-bearing units present in Dutch Canyon and to characterize water quality within these units. The physical hydrogeology of Dutch Canyon was assessed mainly through the collation of 196 local well reports that contained lithologic information from which individual hydrostratigraphic units were identified and characterized. Hydraulic parameters for individual units were estimated using pump rates and drawdowns provided in select well reports. Water quality for the units identified was assessed through the collection of 48 samples of well, spring, and stream water from Dutch Canyon. Measurements of pH, specific conductivity, temperature, dissolved oxygen, reduction potential, and alkalinity were recorded in the field and samples were analyzed for major ions, arsenic, and stable isotopes. The major water-bearing units of Dutch Canyon were separated into five physically distinct hydrostratigrapic units: the lower, middle, and upper units of the sedimentary Lower Miocene Scappoose Formation, and the Wapshilla Ridge and Ortley members of the Lower to Middle Miocene Grande Ronde Basalt. Groundwater flow likely occurs in discrete, relatively thin (~2- to 10-m thick) zones within the Grand Ronde Basalt members. These units only occur along the slopes and ridges of Dutch Canyon west of the Portland Hills Fault, which parallels the eastern margin of the study area. The Scappoose Formation units contain clay- and silt-rich layers and lenses that limit the useable aquifer volume and vertical movement of groundwaters. In general, all hydrostratrigraphic units east of the Portland Hills Fault have low transmissivities and water wells completed in each of them are commonly low- yielding wells, though there are some exceptions. Geochemically, the lower and middle units of the Scappoose Formation were similar to one another with many wells yielding groundwater with high total dissolved solids (TDS) contents (mean TDS = 330 mg L-1; n = 27). Nearly 20% of the wells sampled that were screened in these units (5 of 27) yielded groundwater that exceeded the U.S. Environmental Protection Agency's National Secondary (non-enforceable) Drinking Water Regulation standard of 500 mg L-1 TDS. The upper unit of the Scappoose Formation and the overlying Grande Ronde Basalt members generally yield water with lower TDS contents (mean < 200 mg L-1; maximum = 342 mg L-1; n = 20). Groundwater resources in Dutch Canyon are limited and low well yields are common. The primary water quality concern is saline water, which is generally found in the lower and middle units of the Scappoose Formation near the valley floor. Low recharge rates determined from hydrograph analysis of stream discharge measurements are consistent with the geology and steep terrain of the area and further limit the available groundwater and the degree of flushing of what may be connate waters in the deeper units. Title: Hydrogeologic Characterization of Dutch Canyon, Scappoose, Oregon Author: Wagner, Derrick Lee Year: 2013 Dutch Canyon is located directly west of the City of Scappoose in Columbia County Oregon. This area is proximate to Highway 30, a major access corridor to downtown Portland, and is experiencing a population increase, which is expected to continue and likely accelerate. As a result, there is growing pressure on water resources. Individual and community efforts to utilize groundwater resources have been hampered by generally poor groundwater yields and water quality concerns outside of the Columbia River corridor and a lack of published hydrogeologic information for the region. The intent of this study is to identify the water-bearing units present in Dutch Canyon and to characterize water quality within these units. The physical hydrogeology of Dutch Canyon was assessed mainly through the collation of 196 local well reports that contained lithologic information from which individual hydrostratigraphic units were identified and characterized. Hydraulic parameters for individual units were estimated using pump rates and drawdowns provided in select well reports. Water quality for the units identified was assessed through the collection of 48 samples of well, spring, and stream water from Dutch Canyon. Measurements of pH, specific conductivity, temperature, dissolved oxygen, reduction potential, and alkalinity were recorded in the field and samples were analyzed for major ions, arsenic, and stable isotopes. The major water-bearing units of Dutch Canyon were separated into five physically distinct hydrostratigrapic units: the lower, middle, and upper units of the sedimentary Lower Miocene Scappoose Formation, and the Wapshilla Ridge and Ortley members of the Lower to Middle Miocene Grande Ronde Basalt. Groundwater flow likely occurs in discrete, relatively thin (~2- to 10-m thick) zones within the Grand Ronde Basalt members. These units only occur along the slopes and ridges of Dutch Canyon west of the Portland Hills Fault, which parallels the eastern margin of the study area. The Scappoose Formation units contain clay- and silt-rich layers and lenses that limit the useable aquifer volume and vertical movement of groundwaters. In general, all hydrostratrigraphic units east of the Portland Hills Fault have low transmissivities and water wells completed in each of them are commonly low- yielding wells, though there are some exceptions. Geochemically, the lower and middle units of the Scappoose Formation were similar to one another with many wells yielding groundwater with high total dissolved solids (TDS) contents (mean TDS = 330 mg L-1; n = 27). Nearly 20% of the wells sampled that were screened in these units (5 of 27) yielded groundwater that exceeded the U.S. Environmental Protection Agency's National Secondary (non-enforceable) Drinking Water Regulation standard of 500 mg L-1 TDS. The upper unit of the Scappoose Formation and the overlying Grande Ronde Basalt members generally yield water with lower TDS contents (mean < 200 mg L-1; maximum = 342 mg L-1; n = 20). Groundwater resources in Dutch Canyon are limited and low well yields are common. The primary water quality concern is saline water, which is generally found in the lower and middle units of the Scappoose Formation near the valley floor. Low recharge rates determined from hydrograph analysis of stream discharge measurements are consistent with the geology and steep terrain of the area and further limit the available groundwater and the degree of flushing of what may be connate waters in the deeper units. Close