Search

Search Results

• 1. [Image] Instruments for Subsurface Monitoring of Geothermal Subsidence

  	The requirements for a subsurface geothermal subsidence instrument were reviewed. Available instruments for monitoring subsurface displacements, both vertical and horizontal, were studied and the most ...
  	Citation × Citation Citation Abstract Copy Title: Instruments for Subsurface Monitoring of Geothermal Subsidence Author: O'Rourke, J.E. Year: 1979 The requirements for a subsurface geothermal subsidence instrument were reviewed. Available instruments for monitoring subsurface displacements, both vertical and horizontal, were studied and the most capable instruments identified. Techniques and materials for improving existing or developing new instruments were evaluated. Elements of sensor and signal technology with potential for high temperature monitoring of subsidence were identified. Drawing from these studies, methods to adapt production Wells for monitoring were proposed and several new instrumentation systems were conceptually designed. Finally, four instrumentation systems were selected for future development. These systems are: triple sensor induction sensor probe (with casing collar markers); triple sensor gamma ray detector probe (with radioactive markers); triple sensor reed switch probe (with magnet markers); and triple sensor oscillator-type magnet detector probe (with magnet markers). All are designed for use in well casing incorporating slip couplings or bellows sections, although the gamma ray detector probe may also be used in unlined holes. These systems all measure vertical movement. Instruments to measure horizontal displacement due to geothermal subsidence were studied and the required instrument performance was judged to be beyond the state-of-the-art. Thus, no conceptual designs for instruments to monitor horizontal movement are included Title: Instruments for Subsurface Monitoring of Geothermal Subsidence Author: O'Rourke, J.E. Year: 1979 The requirements for a subsurface geothermal subsidence instrument were reviewed. Available instruments for monitoring subsurface displacements, both vertical and horizontal, were studied and the most capable instruments identified. Techniques and materials for improving existing or developing new instruments were evaluated. Elements of sensor and signal technology with potential for high temperature monitoring of subsidence were identified. Drawing from these studies, methods to adapt production Wells for monitoring were proposed and several new instrumentation systems were conceptually designed. Finally, four instrumentation systems were selected for future development. These systems are: triple sensor induction sensor probe (with casing collar markers); triple sensor gamma ray detector probe (with radioactive markers); triple sensor reed switch probe (with magnet markers); and triple sensor oscillator-type magnet detector probe (with magnet markers). All are designed for use in well casing incorporating slip couplings or bellows sections, although the gamma ray detector probe may also be used in unlined holes. These systems all measure vertical movement. Instruments to measure horizontal displacement due to geothermal subsidence were studied and the required instrument performance was judged to be beyond the state-of-the-art. Thus, no conceptual designs for instruments to monitor horizontal movement are included Close

• 2. [Image] Geothermal Environmental Impact Assessment, Ground Water Monitoring Guidelines for Geothermal Development

  	Potential ground water pollution from geothermal resource development, conversion, and waste disposal are discussed and guidelines for developing a ground water monitoring plan for any such development ...
  	Citation × Citation Citation Abstract Copy Title: Geothermal Environmental Impact Assessment, Ground Water Monitoring Guidelines for Geothermal Development Author: Weiss, R.B. Year: 1979 Potential ground water pollution from geothermal resource development, conversion, and waste disposal are discussed and guidelines for developing a ground water monitoring plan for any such development are proposed. Geothermal processes, borehole logging, and injection well technology as they relate to geothermal development and ground water monitoring are also outlined Title: Geothermal Environmental Impact Assessment, Ground Water Monitoring Guidelines for Geothermal Development Author: Weiss, R.B. Year: 1979 Potential ground water pollution from geothermal resource development, conversion, and waste disposal are discussed and guidelines for developing a ground water monitoring plan for any such development are proposed. Geothermal processes, borehole logging, and injection well technology as they relate to geothermal development and ground water monitoring are also outlined Close

• 3. [Image] Environmental Monitoring for the Hot Dry Rock Geothermal Energy Development Project, Annual Report for the Period July 1975-June 1976

  	For the last four years, the Los Alamos Scientific Laboratory has been investigating the feasibility demonstration of a technique for extracting geothermal energy from hot dry rock existing at moderate ...
  	Citation × Citation Citation Abstract Copy Title: Environmental Monitoring for the Hot Dry Rock Geothermal Energy Development Project, Annual Report for the Period July 1975-June 1976 Author: Pettitt, Roland A. Year: 1976 For the last four years, the Los Alamos Scientific Laboratory has been investigating the feasibility demonstration of a technique for extracting geothermal energy from hot dry rock existing at moderate depths beneath the surface of the earth. In the hot dry rock (HDR) concept, a manmade geothermal reservoir would be formed by drilling an initial borehole into a region of hot rock, creating a large fracture at the bottom of the hole, then intersecting the fractured area with a second borehole. The heat contained in this underground reservoir would then be brought to the surface by the circulation of water through the system. The objectives of this environmental monitoring report are to provide a brief conceptual and historical summary of the Hot Dry Rock Geothermal Project, a brief overview of the environmental monitoring responsibilities and activities of the Los Alamos Scientific Laboratory, and descriptions of the studies, problems, and results obtained from the various monitoring programs. Included are descriptions of the work that has been done in three major monitoring areas: (1) water quality, both surface and subsurface; (2) seismicity, with a discussion of the monitoring strategy of regional, local, and close-in detection networks; and (3) climatology. The purpose of these programs is to record baseline data, define potential effects from the project activities, and determine and record any impacts that may occur. The development of the hot dry rock geothermal energy resource and associated energy extraction technology is a new field of endeavor, with no established environmental guidelines. It is doubtful if the problems encountered and solutions devised in traditional geothermal systems will apply directly to hot dry rock development. Therefore, the impacts that are encountered in this project will be of particular value in making future environmental Assessments for this type of energy resource development in other locations in different geologic settings. By the end of the reporting period, there had been no unacceptable impacts on the environment in any of the three monitoring areas Title: Environmental Monitoring for the Hot Dry Rock Geothermal Energy Development Project, Annual Report for the Period July 1975-June 1976 Author: Pettitt, Roland A. Year: 1976 For the last four years, the Los Alamos Scientific Laboratory has been investigating the feasibility demonstration of a technique for extracting geothermal energy from hot dry rock existing at moderate depths beneath the surface of the earth. In the hot dry rock (HDR) concept, a manmade geothermal reservoir would be formed by drilling an initial borehole into a region of hot rock, creating a large fracture at the bottom of the hole, then intersecting the fractured area with a second borehole. The heat contained in this underground reservoir would then be brought to the surface by the circulation of water through the system. The objectives of this environmental monitoring report are to provide a brief conceptual and historical summary of the Hot Dry Rock Geothermal Project, a brief overview of the environmental monitoring responsibilities and activities of the Los Alamos Scientific Laboratory, and descriptions of the studies, problems, and results obtained from the various monitoring programs. Included are descriptions of the work that has been done in three major monitoring areas: (1) water quality, both surface and subsurface; (2) seismicity, with a discussion of the monitoring strategy of regional, local, and close-in detection networks; and (3) climatology. The purpose of these programs is to record baseline data, define potential effects from the project activities, and determine and record any impacts that may occur. The development of the hot dry rock geothermal energy resource and associated energy extraction technology is a new field of endeavor, with no established environmental guidelines. It is doubtful if the problems encountered and solutions devised in traditional geothermal systems will apply directly to hot dry rock development. Therefore, the impacts that are encountered in this project will be of particular value in making future environmental Assessments for this type of energy resource development in other locations in different geologic settings. By the end of the reporting period, there had been no unacceptable impacts on the environment in any of the three monitoring areas Close

• 4. [Image] Geothermal Progress Monitor Report No. 5. Progress Report, June 1981

  	Updated information is presented on activities and progress in the areas of electric power plants, direct heat applications, deep well drilling, leasing of federal lands, legislative and regulatory actions, ...
  	Citation × Citation Citation Abstract Copy Title: Geothermal Progress Monitor Report No. 5. Progress Report, June 1981 Author: Assistant Secretary for Conservation and Renewable Energy, Division of Geothermal Energy Year: 1981 Updated information is presented on activities and progress in the areas of electric power plants, direct heat applications, deep well drilling, leasing of federal lands, legislative and regulatory actions, research and development, and others. Special attention is given in this report to 1980 highlights, particularly in the areas of electric and direct heat uses, drilling, and the Federal lands leasing program. This report also includes a summary of the DOE FY 1982 geothermal budget request to Congress Title: Geothermal Progress Monitor Report No. 5. Progress Report, June 1981 Author: Assistant Secretary for Conservation and Renewable Energy, Division of Geothermal Energy Year: 1981 Updated information is presented on activities and progress in the areas of electric power plants, direct heat applications, deep well drilling, leasing of federal lands, legislative and regulatory actions, research and development, and others. Special attention is given in this report to 1980 highlights, particularly in the areas of electric and direct heat uses, drilling, and the Federal lands leasing program. This report also includes a summary of the DOE FY 1982 geothermal budget request to Congress Close

• 5. [Image] Geothermal Progress Monitor. Report No. 15, December 1993

  	Two themes dominate this issue of the Geothermal Progress Monitor, the 15th since its inception in 1980. The first of these is the significance of the government/industry partnership role in geothermal ...
  	Citation × Citation Citation Abstract Copy Title: Geothermal Progress Monitor. Report No. 15, December 1993 Author: Assistant Secretary for Energy and Efficiency and Renewable Energy, Geothermal Division Year: 1993 Two themes dominate this issue of the Geothermal Progress Monitor, the 15th since its inception in 1980. The first of these is the significance of the government/industry partnership role in geothermal development. This joint effort is reflected in the continued, measured growth in the use of geothermal energy, for both power generation and direct use applications, in this country and abroad, as well as in the development of new, innovative technologies to ensure a bright future for the resource. The second theme is the growing popularity of geothermal heat pumps (GHPs) among utilities, their customers, and federal agencies, all with disparate interests in the technology Title: Geothermal Progress Monitor. Report No. 15, December 1993 Author: Assistant Secretary for Energy and Efficiency and Renewable Energy, Geothermal Division Year: 1993 Two themes dominate this issue of the Geothermal Progress Monitor, the 15th since its inception in 1980. The first of these is the significance of the government/industry partnership role in geothermal development. This joint effort is reflected in the continued, measured growth in the use of geothermal energy, for both power generation and direct use applications, in this country and abroad, as well as in the development of new, innovative technologies to ensure a bright future for the resource. The second theme is the growing popularity of geothermal heat pumps (GHPs) among utilities, their customers, and federal agencies, all with disparate interests in the technology Close

• 6. [Image] Geothermal Progress Monitor: Report No. 14, December 1992

  	This issue of the Geothermal Progress Monitor, the 14th since its inception in 1980, highlights the anticipated rapid growth in the use of geothermal heat pumps and documents the continued growth in the ...
  	Citation × Citation Citation Abstract Copy Title: Geothermal Progress Monitor: Report No. 14, December 1992 Author: Assistant Secretary for Conservation and Renewable Energy, Geothermal Division Year: 1992 This issue of the Geothermal Progress Monitor, the 14th since its inception in 1980, highlights the anticipated rapid growth in the use of geothermal heat pumps and documents the continued growth in the use of geothermal energy for power generation, both in this country and abroad. In countries with a relatively large demand for new generation capacity, geothermal, if available, is being called on as a preferable alternative to the use of domestic or imported oil. On the other hand, in this country where current demand for new capacity is less, geothermal energy is commonly being put to Use in small power generation units operating on the hot water resource Title: Geothermal Progress Monitor: Report No. 14, December 1992 Author: Assistant Secretary for Conservation and Renewable Energy, Geothermal Division Year: 1992 This issue of the Geothermal Progress Monitor, the 14th since its inception in 1980, highlights the anticipated rapid growth in the use of geothermal heat pumps and documents the continued growth in the use of geothermal energy for power generation, both in this country and abroad. In countries with a relatively large demand for new generation capacity, geothermal, if available, is being called on as a preferable alternative to the use of domestic or imported oil. On the other hand, in this country where current demand for new capacity is less, geothermal energy is commonly being put to Use in small power generation units operating on the hot water resource Close

• 7. [Image] Geothermal Reservoir Engineering Research at Stanford University

  	The Stanford Geothermal Program conducts interdisciplinary research and training in engineering and earth sciences. The central objective of the Program is to carry out research in geothermal reservoir ...
  	Citation × Citation Citation Abstract Copy Title: Geothermal Reservoir Engineering Research at Stanford University Author: Ramey, H. J., Jr. Year: 1983 The Stanford Geothermal Program conducts interdisciplinary research and training in engineering and earth sciences. The central objective of the Program is to carry out research in geothermal reservoir engineering techniques that will be useful to the geothermal industry. A parallel objective is the training of geothermal engineers and scientists for employment in the industry. The research is focused toward accelerated development of hydrothermal resources through the evaluation of fluid reserves, and the forecasting of field behavior with time. Injection technology is a research area receiving special attention. The Programs geared to maintain a balance between laboratory studies and matching field applications Title: Geothermal Reservoir Engineering Research at Stanford University Author: Ramey, H. J., Jr. Year: 1983 The Stanford Geothermal Program conducts interdisciplinary research and training in engineering and earth sciences. The central objective of the Program is to carry out research in geothermal reservoir engineering techniques that will be useful to the geothermal industry. A parallel objective is the training of geothermal engineers and scientists for employment in the industry. The research is focused toward accelerated development of hydrothermal resources through the evaluation of fluid reserves, and the forecasting of field behavior with time. Injection technology is a research area receiving special attention. The Programs geared to maintain a balance between laboratory studies and matching field applications Close

• 8. [Image] Development of the high-temperature redox electrode. Interim report ending March 1980

  	The oxidation-reduction (known as redox) electrode was studied in a pH range corresponding to that found in a CO/sub 2/-silicate buffered system at temperatures ranging from 100 to 250/sup 0/C. Oxidizing ...
  	Citation × Citation Citation Abstract Copy Title: Development of the high-temperature redox electrode. Interim report ending March 1980 Author: Danielson, M.J. Year: 1980 The oxidation-reduction (known as redox) electrode was studied in a pH range corresponding to that found in a CO/sub 2/-silicate buffered system at temperatures ranging from 100 to 250/sup 0/C. Oxidizing conditions were created by injecting oxygen; the greatest reducing conditions, by using hydrogen. The sulfur system (H/sub 2/S, HS/sup -/, S/sup 2/) was not examined at this time, but future work will include this system since it is an important component of the geothermal brine. Both a platinized platinum (Pt-Pt) and a bare platinum (Pt-foil) electrode respond to the redox environment. The response does not appear to indicate thermodynamic equilibrium with the chemical environment; instead a mixed potential response is indicated. The difference in potential between a strong oxidizing environment (0.4-ppM O/sub 2/) and a strong reducing environment (0.5-atm H/sub 2/) is typically > 1 volt at all temperatures. The magnitude of this response makes the platinum electrode a suitable sensor for continuous monitoring of the geothermal environment for oxygen intrusions. The platinized platinum redox electrode is superior to the bare platinum electrode; PNL-3377 Title: Development of the high-temperature redox electrode. Interim report ending March 1980 Author: Danielson, M.J. Year: 1980 The oxidation-reduction (known as redox) electrode was studied in a pH range corresponding to that found in a CO/sub 2/-silicate buffered system at temperatures ranging from 100 to 250/sup 0/C. Oxidizing conditions were created by injecting oxygen; the greatest reducing conditions, by using hydrogen. The sulfur system (H/sub 2/S, HS/sup -/, S/sup 2/) was not examined at this time, but future work will include this system since it is an important component of the geothermal brine. Both a platinized platinum (Pt-Pt) and a bare platinum (Pt-foil) electrode respond to the redox environment. The response does not appear to indicate thermodynamic equilibrium with the chemical environment; instead a mixed potential response is indicated. The difference in potential between a strong oxidizing environment (0.4-ppM O/sub 2/) and a strong reducing environment (0.5-atm H/sub 2/) is typically > 1 volt at all temperatures. The magnitude of this response makes the platinum electrode a suitable sensor for continuous monitoring of the geothermal environment for oxygen intrusions. The platinized platinum redox electrode is superior to the bare platinum electrode; PNL-3377 Close

• 9. [Image] Hot Dry Rock Geothermal Energy Development Project. Annual Report, Fiscal Year 1977

  	The feasibility of extracting geothermal energy from hot dry rock in the earth's crust was investigated. The concept being investigated involves drilling a deep hole, creating an artificial geothermal ...
  	Citation × Citation Citation Abstract Copy Title: Hot Dry Rock Geothermal Energy Development Project. Annual Report, Fiscal Year 1977 Author: Los Alamos Scientific Laboratory HDR Project Staff Year: 1978 The feasibility of extracting geothermal energy from hot dry rock in the earth's crust was investigated. The concept being investigated involves drilling a deep hole, creating an artificial geothermal reservoir at the bottom of the hole by hydraulic fracturing, and then intersecting the fracture with a second borehole. At the beginning of FY77, the downhole system was complete, but the impedance to the flow of fluid was too high to proceed confidently with the planned energy extraction demonstration. Therefore, in FY77 work focused on an intensive investigation of the characteristics of the downhole system and on the development of the necessary tools and techniques for understanding and improving it. Research results are presented under the following section headings: introduction and history; hot dry rock resource assessment and site selection; instrumentation and equipment development; drilling and fracturing; reservoir engineering; energy extraction system; environmental studies; project management and liaison; and, looking back and ahead. (JGB) Title: Hot Dry Rock Geothermal Energy Development Project. Annual Report, Fiscal Year 1977 Author: Los Alamos Scientific Laboratory HDR Project Staff Year: 1978 The feasibility of extracting geothermal energy from hot dry rock in the earth's crust was investigated. The concept being investigated involves drilling a deep hole, creating an artificial geothermal reservoir at the bottom of the hole by hydraulic fracturing, and then intersecting the fracture with a second borehole. At the beginning of FY77, the downhole system was complete, but the impedance to the flow of fluid was too high to proceed confidently with the planned energy extraction demonstration. Therefore, in FY77 work focused on an intensive investigation of the characteristics of the downhole system and on the development of the necessary tools and techniques for understanding and improving it. Research results are presented under the following section headings: introduction and history; hot dry rock resource assessment and site selection; instrumentation and equipment development; drilling and fracturing; reservoir engineering; energy extraction system; environmental studies; project management and liaison; and, looking back and ahead. (JGB) Close

• 10. [Image] Testing Operations Plan: Coso Geothermal Exploratory Hole No. 1 (CGEH-1)

  	Coso Geothermal Exploratory Hole No. 1 (CGEH-1) was drilled to investigate the potential of the Coso Hot Springs Known Geothermal Resource Area (KGRA) in southeastern California. Detailed background information ...
  	Citation × Citation Citation Abstract Copy Title: Testing Operations Plan: Coso Geothermal Exploratory Hole No. 1 (CGEH-1) Author: Nevada Operations Office; Naval Weapons Center, China Lake Year: 1978 Coso Geothermal Exploratory Hole No. 1 (CGEH-1) was drilled to investigate the potential of the Coso Hot Springs Known Geothermal Resource Area (KGRA) in southeastern California. Detailed background information is contained in the drilling plan, ''Coso Geothermal Exploratory Hole No. 1 (CGEH-1),'' NVO-184, dated June 1977. The purpose of this supplement to NVO-184 is to establish a plan of operations for testing the resource after completion of well drilling activities. Major elements of this plan include setting forth the management and organizational concept to be followed, describing the generalized site activities required and the well testing operations, and establishing schedules, environmental considerations, and technical documentation requirements. The objective of this testing is to determine the well productivity and geothermal reservoir parameters. The testing will consist of both static and dynamic measurements. The static measurements will include wellhead pressure monitoring plus downhole temperature and pressure surveys conducted with the well shut in. The dynamic measurements will include downhole and surface pressure, temperature, and flow rate data with the well producing at varying rates. Two types of dynamic tests are contemplated; the first utilizing the James Method and the second utilizing a separator test system, if justified by an evaluation of the resource potential Title: Testing Operations Plan: Coso Geothermal Exploratory Hole No. 1 (CGEH-1) Author: Nevada Operations Office; Naval Weapons Center, China Lake Year: 1978 Coso Geothermal Exploratory Hole No. 1 (CGEH-1) was drilled to investigate the potential of the Coso Hot Springs Known Geothermal Resource Area (KGRA) in southeastern California. Detailed background information is contained in the drilling plan, ''Coso Geothermal Exploratory Hole No. 1 (CGEH-1),'' NVO-184, dated June 1977. The purpose of this supplement to NVO-184 is to establish a plan of operations for testing the resource after completion of well drilling activities. Major elements of this plan include setting forth the management and organizational concept to be followed, describing the generalized site activities required and the well testing operations, and establishing schedules, environmental considerations, and technical documentation requirements. The objective of this testing is to determine the well productivity and geothermal reservoir parameters. The testing will consist of both static and dynamic measurements. The static measurements will include wellhead pressure monitoring plus downhole temperature and pressure surveys conducted with the well shut in. The dynamic measurements will include downhole and surface pressure, temperature, and flow rate data with the well producing at varying rates. Two types of dynamic tests are contemplated; the first utilizing the James Method and the second utilizing a separator test system, if justified by an evaluation of the resource potential Close