Oregon Explorer CrossSearch Search Results

1. [Image] Geothermal Environmental Impact Assessment: Subsurface Environmental Assessment for Four Geothermal Systems


	Geothermal systems are described for Imperial Valley and The Geysers, California; Klamath Falls, Oregon; and the Rio Grande Rift Zone, New Mexico; including information on location, area, depth, temperature, ...
	Citation Citation Citation Abstract Copy Title: Geothermal Environmental Impact Assessment: Subsurface Environmental Assessment for Four Geothermal Systems Author: Geonomics, Inc. Year: 1978 Geothermal systems are described for Imperial Valley and The Geysers, California; Klamath Falls, Oregon; and the Rio Grande Rift Zone, New Mexico; including information on location, area, depth, temperature, fluid phase and composition, resource base and status of development. The subsurface environmental assessment evaluates potential groundwater degradation, seismicity and subsidence. A general discussion on geothermal systems, pollution potential, chemical characteristics of geothermal fluids and environmental effects of geothermal water pollutants is presented as background material. For the Imperial Valley, all publicly available water quality and location data for geothermal and nongeothermal wells in and near the East Mesa, Salton Sea, Heber, Brawley, Dunes and Glamis KGRAs have been compiled and plotted. The geothermal fluids which will be reinjected range in salinity from a few thousand to more than a quarter million ppm. Although Imperial Valley is a major agricultural center, groundwater use in and near most of these KGRAs is minimal. Extensive seismicity and subsidence monitoring networks have been established in this area of high natural seismicity and subsidence. The vapor-dominated geysers geothermal field is the largest electricity producer in the world. Groundwater in this mountainous region flows with poor hydraulic continuity in fractured rock. Ground and surface water quality is generally good, but high boron concentrations in hot springs and geothermal effluents is of significant concern; however, spent condensate is reinjected. High microearthquake activity is noted around the geothermal reservoir and potential subsidence effects are considered minimal. In Klamath Falls, geothermal fluids up to 113 C (235 F) are used for space heating, mostly through downhole heat exchangers with only minor, relatively benign, geothermal fluid being produced at the surface. Seismicity is low and is not expected to increase. Subsidence is not recognized. Of all geothermal occurrences in the Rio Grande Rift, the Valles Caldera is currently of primary interest. injection of geothermal effluent from hydrothermal production Wells should remove any hydrologic hazard due to some potentially noxious constituents. Waters circulating in the LASL Hot Dry Rock experiment are potable. Seismic effects are expected to be minimal. Subsidence effects could develop Title: Geothermal Environmental Impact Assessment: Subsurface Environmental Assessment for Four Geothermal Systems Author: Geonomics, Inc. Year: 1978 Geothermal systems are described for Imperial Valley and The Geysers, California; Klamath Falls, Oregon; and the Rio Grande Rift Zone, New Mexico; including information on location, area, depth, temperature, fluid phase and composition, resource base and status of development. The subsurface environmental assessment evaluates potential groundwater degradation, seismicity and subsidence. A general discussion on geothermal systems, pollution potential, chemical characteristics of geothermal fluids and environmental effects of geothermal water pollutants is presented as background material. For the Imperial Valley, all publicly available water quality and location data for geothermal and nongeothermal wells in and near the East Mesa, Salton Sea, Heber, Brawley, Dunes and Glamis KGRAs have been compiled and plotted. The geothermal fluids which will be reinjected range in salinity from a few thousand to more than a quarter million ppm. Although Imperial Valley is a major agricultural center, groundwater use in and near most of these KGRAs is minimal. Extensive seismicity and subsidence monitoring networks have been established in this area of high natural seismicity and subsidence. The vapor-dominated geysers geothermal field is the largest electricity producer in the world. Groundwater in this mountainous region flows with poor hydraulic continuity in fractured rock. Ground and surface water quality is generally good, but high boron concentrations in hot springs and geothermal effluents is of significant concern; however, spent condensate is reinjected. High microearthquake activity is noted around the geothermal reservoir and potential subsidence effects are considered minimal. In Klamath Falls, geothermal fluids up to 113 C (235 F) are used for space heating, mostly through downhole heat exchangers with only minor, relatively benign, geothermal fluid being produced at the surface. Seismicity is low and is not expected to increase. Subsidence is not recognized. Of all geothermal occurrences in the Rio Grande Rift, the Valles Caldera is currently of primary interest. injection of geothermal effluent from hydrothermal production Wells should remove any hydrologic hazard due to some potentially noxious constituents. Waters circulating in the LASL Hot Dry Rock experiment are potable. Seismic effects are expected to be minimal. Subsidence effects could develop

2. [Image] Atlantic coastal plain geothermal test holes, New Jersey: Hole completion reports


	A description of the Atlantic Coastal Plains Geothermal Drilling Program and data for the following Geothermal test holes drilled in New Jersey are summarized: Site No. 40, Fort Monmouth; Site No. 41, ...
	Citation Citation Citation Abstract Copy Title: Atlantic coastal plain geothermal test holes, New Jersey: Hole completion reports Author: Cobb, L.B. Year: 1979 A description of the Atlantic Coastal Plains Geothermal Drilling Program and data for the following Geothermal test holes drilled in New Jersey are summarized: Site No. 40, Fort Monmouth; Site No. 41, Sea Girt; Site No. 39-A, Forked River; Site No. 38, Atlantic City; and Site No. 36, Cape May; NVO-1558-1 Title: Atlantic coastal plain geothermal test holes, New Jersey: Hole completion reports Author: Cobb, L.B. Year: 1979 A description of the Atlantic Coastal Plains Geothermal Drilling Program and data for the following Geothermal test holes drilled in New Jersey are summarized: Site No. 40, Fort Monmouth; Site No. 41, Sea Girt; Site No. 39-A, Forked River; Site No. 38, Atlantic City; and Site No. 36, Cape May; NVO-1558-1

3. [Image] Energy Research and Technology. Interim Bibliography of Reports, with Abstracts


	This 71 page document is a bibliography of reports, with abstracts of energy research and technology
	Citation Citation Citation Abstract Copy Title: Energy Research and Technology. Interim Bibliography of Reports, with Abstracts Author: National Science Foundation Year: 1974 This 71 page document is a bibliography of reports, with abstracts of energy research and technology Title: Energy Research and Technology. Interim Bibliography of Reports, with Abstracts Author: National Science Foundation Year: 1974 This 71 page document is a bibliography of reports, with abstracts of energy research and technology

4. [Image] Geothermal Potential in the Albuquerque Area, New Mexico


	Access to the near-surface fresh water zone of this enormous unconfined ground-water aquifer is Albuquerque's greatest economic asset to accommodate growth. Utilizing the vast subsurface hot-water system ...
	Citation Citation Citation Abstract Copy Title: Geothermal Potential in the Albuquerque Area, New Mexico Author: Grant, P.R. Jr. Year: 1982 Access to the near-surface fresh water zone of this enormous unconfined ground-water aquifer is Albuquerque's greatest economic asset to accommodate growth. Utilizing the vast subsurface hot-water system underlying the normal temperature, near-surface regime has the potential to make much of New Mexico's largest community independent of natural gas for its space-heating requirements Title: Geothermal Potential in the Albuquerque Area, New Mexico Author: Grant, P.R. Jr. Year: 1982 Access to the near-surface fresh water zone of this enormous unconfined ground-water aquifer is Albuquerque's greatest economic asset to accommodate growth. Utilizing the vast subsurface hot-water system underlying the normal temperature, near-surface regime has the potential to make much of New Mexico's largest community independent of natural gas for its space-heating requirements

5. [Image] Investigations of the Dunes Geothermal Anomaly, Imperial Valley, California: Part 1. Geochemistry of Geothermal Fluid


	A geothermal test borehole, DWR Dunes No. 1, was drilled in the Dunes geothermal anomaly by the State of California Department of Water Resources. Water samples from this geothermal system were collected ...
	Citation Citation Citation Abstract Copy Title: Investigations of the Dunes Geothermal Anomaly, Imperial Valley, California: Part 1. Geochemistry of Geothermal Fluid Author: Coplen, T.B. Year: 1974 A geothermal test borehole, DWR Dunes No. 1, was drilled in the Dunes geothermal anomaly by the State of California Department of Water Resources. Water samples from this geothermal system were collected from perforations at 109 and 260 meters depth. These water samples were analyzed for chemical and isotopic composition. These tests indicate that the source of the geothermal fluid is partially evaporated Colorado River water. An investigation of chloride/bromide ratios was used to determine the source of the salt in the geothermal fluid from Dunes. The result may suggest that the salt in the Salton Sea geothermal system and in the Dunes geothermal anomaly is derived from the Colorado River and that this water has not done any leaching or been mixed with water from other sources. It was determined that further geophysical Studies (gravity, seismic refraction, electrical resistivity, and magnetotelluric sounding) are needed to locate the reservoir of geothermal fluid in the Dunes system Title: Investigations of the Dunes Geothermal Anomaly, Imperial Valley, California: Part 1. Geochemistry of Geothermal Fluid Author: Coplen, T.B. Year: 1974 A geothermal test borehole, DWR Dunes No. 1, was drilled in the Dunes geothermal anomaly by the State of California Department of Water Resources. Water samples from this geothermal system were collected from perforations at 109 and 260 meters depth. These water samples were analyzed for chemical and isotopic composition. These tests indicate that the source of the geothermal fluid is partially evaporated Colorado River water. An investigation of chloride/bromide ratios was used to determine the source of the salt in the geothermal fluid from Dunes. The result may suggest that the salt in the Salton Sea geothermal system and in the Dunes geothermal anomaly is derived from the Colorado River and that this water has not done any leaching or been mixed with water from other sources. It was determined that further geophysical Studies (gravity, seismic refraction, electrical resistivity, and magnetotelluric sounding) are needed to locate the reservoir of geothermal fluid in the Dunes system

6. [Image] Utilization of geothermal energy in the mining and processing of tungsten ore: 2nd quarterly report


	The completed geochemical analysis of groundwater in the Pine Creek area for evaluation of the geothermal potential of this location is presented. Also included is an environmental constraints analysis ...
	Citation Citation Citation Abstract Copy Title: Utilization of geothermal energy in the mining and processing of tungsten ore: 2nd quarterly report Author: Erickson, M.V. Year: 1980 The completed geochemical analysis of groundwater in the Pine Creek area for evaluation of the geothermal potential of this location is presented. Also included is an environmental constraints analysis of Pine Creek noting any potential environmental problems if a geothermal system was developed onsite. Design of a geothermal system is discussed for site-specific applications and is discussed in detail with equipment recommendations and material specifications. A preliminary financial, economic, and institutional assessment of geothermal system located totally on Union Carbide property at Pine Creek is included. (MHR); DOE/ET/27232-T4 Title: Utilization of geothermal energy in the mining and processing of tungsten ore: 2nd quarterly report Author: Erickson, M.V. Year: 1980 The completed geochemical analysis of groundwater in the Pine Creek area for evaluation of the geothermal potential of this location is presented. Also included is an environmental constraints analysis of Pine Creek noting any potential environmental problems if a geothermal system was developed onsite. Design of a geothermal system is discussed for site-specific applications and is discussed in detail with equipment recommendations and material specifications. A preliminary financial, economic, and institutional assessment of geothermal system located totally on Union Carbide property at Pine Creek is included. (MHR); DOE/ET/27232-T4

7. [Image] Operations Research and Systems Analysis of Geopressured/Geothermal Resources in Louisiana. Final Report for Initiation Project


	The development activities for a plan for Louisiana's participation in a Gulf Coast regional research and systems analysis activity. In developing preliminary planning scenarios heavy emphasis was placed ...
	Citation Citation Citation Abstract Copy Title: Operations Research and Systems Analysis of Geopressured/Geothermal Resources in Louisiana. Final Report for Initiation Project Author: Wilkins, B., Jr. Year: 1978 The development activities for a plan for Louisiana's participation in a Gulf Coast regional research and systems analysis activity. In developing preliminary planning scenarios heavy emphasis was placed on data describing the resource base. The scenarios are produced using a computer-oriented planning program that is code-named GEODEV. Examples of development scenarios for four fairways in Louisiana are included in an appendix. Progress in identification of decision makers, a state-wide advisory group, coordination of activities with Texas, and regional operations research activity. Also included in appendices are: communications to identify Decision Makers, Report to Governor and Legislature on Status of GP/GT Energy in Louisiana, and a paper presented jointly by Louisiana and Texas Project Team at Third Geopressured Geothermal Energy Conference, University of Southwestern Louisiana, Lafayette, Louisiana. (MHR) Title: Operations Research and Systems Analysis of Geopressured/Geothermal Resources in Louisiana. Final Report for Initiation Project Author: Wilkins, B., Jr. Year: 1978 The development activities for a plan for Louisiana's participation in a Gulf Coast regional research and systems analysis activity. In developing preliminary planning scenarios heavy emphasis was placed on data describing the resource base. The scenarios are produced using a computer-oriented planning program that is code-named GEODEV. Examples of development scenarios for four fairways in Louisiana are included in an appendix. Progress in identification of decision makers, a state-wide advisory group, coordination of activities with Texas, and regional operations research activity. Also included in appendices are: communications to identify Decision Makers, Report to Governor and Legislature on Status of GP/GT Energy in Louisiana, and a paper presented jointly by Louisiana and Texas Project Team at Third Geopressured Geothermal Energy Conference, University of Southwestern Louisiana, Lafayette, Louisiana. (MHR)

8. [Image] Comparative assessment of five potential sites for hydrothermal-magma systems: summary


	A comparative assessment of five potential hydrothermal-magma sites for this facet of the Thermal Regimes part of the CSDP has been prepared for the DOE Office of Basic Energy Sciences. The five sites ...
	Citation Citation Citation Abstract Copy Title: Comparative assessment of five potential sites for hydrothermal-magma systems: summary Author: Luth, W.C Year: 1980 A comparative assessment of five potential hydrothermal-magma sites for this facet of the Thermal Regimes part of the CSDP has been prepared for the DOE Office of Basic Energy Sciences. The five sites are: The Geysers-Clear Lake, CA, Long Valley, CA, Rio Grande Rift, NM, Roosevelt Hot Springs, UT, and Salton Trough, CA. This site assessment study has drawn together background information (geology, geochemistry, geophysics, and energy transport) on the five sites as a preliminary stage to site selection. Criteria for site selection are that potential sites have identifiable, or likely, hydrothermal systems and associated magma sources, and the important scientific questions can be identified and answered by deep scientific holes. Recommendations were made.; DOE/TIC-11303 Title: Comparative assessment of five potential sites for hydrothermal-magma systems: summary Author: Luth, W.C Year: 1980 A comparative assessment of five potential hydrothermal-magma sites for this facet of the Thermal Regimes part of the CSDP has been prepared for the DOE Office of Basic Energy Sciences. The five sites are: The Geysers-Clear Lake, CA, Long Valley, CA, Rio Grande Rift, NM, Roosevelt Hot Springs, UT, and Salton Trough, CA. This site assessment study has drawn together background information (geology, geochemistry, geophysics, and energy transport) on the five sites as a preliminary stage to site selection. Criteria for site selection are that potential sites have identifiable, or likely, hydrothermal systems and associated magma sources, and the important scientific questions can be identified and answered by deep scientific holes. Recommendations were made.; DOE/TIC-11303

9. [Image] Comparative assessment of five potential sites for hydrothermal-magma systems: energy transport


	A comparative assessment of five sites is being prepared as part of a Continental Scientific Drilling Program (CSDP) review of thermal regimes for the purpose of scoping areas for future research and drilling ...
	Citation Citation Citation Abstract Copy Title: Comparative assessment of five potential sites for hydrothermal-magma systems: energy transport Author: Hardee, H.C. Year: 1980 A comparative assessment of five sites is being prepared as part of a Continental Scientific Drilling Program (CSDP) review of thermal regimes for the purpose of scoping areas for future research and drilling activities. This background report: discusses the various energy transport processes likely to be encountered in a hydrothermal-magma system, reviews related literature, discusses research and field data needs, and reviews the sites from an energy transport viewpoint. At least three major zones exist in the magma-hydrothermal transport system: the magma zone, the hydrothermal zone, and the transition zone between the two. Major energy transport questions relate to the nature and existence of these zones and their evolution with time. Additional energy transport questions are concerned with the possible existence of critical state and super-critical state permeable convection in deep geothermal systems. A review of thermal transport models emphasizes the fact that present transport models and computational techniques far outweigh the scarcity and quality of deep field data. Title: Comparative assessment of five potential sites for hydrothermal-magma systems: energy transport Author: Hardee, H.C. Year: 1980 A comparative assessment of five sites is being prepared as part of a Continental Scientific Drilling Program (CSDP) review of thermal regimes for the purpose of scoping areas for future research and drilling activities. This background report: discusses the various energy transport processes likely to be encountered in a hydrothermal-magma system, reviews related literature, discusses research and field data needs, and reviews the sites from an energy transport viewpoint. At least three major zones exist in the magma-hydrothermal transport system: the magma zone, the hydrothermal zone, and the transition zone between the two. Major energy transport questions relate to the nature and existence of these zones and their evolution with time. Additional energy transport questions are concerned with the possible existence of critical state and super-critical state permeable convection in deep geothermal systems. A review of thermal transport models emphasizes the fact that present transport models and computational techniques far outweigh the scarcity and quality of deep field data.

10. [Image] Investigation and evaluation of geopressured-geothermal wells. Fairfax Foster Sutter No. 2 well, St. Mary Parish, Louisiana. Volume I. Completion and testing. Final report


	The Fairfax Foster Sutter No. 2 well, located in the East Franklin area of St. Mary Parish, Louisiana, is the first successful test of a geopressured-geothermal aquifer under the Well-of-Opportunity program. ...
	Citation Citation Citation Abstract Copy Title: Investigation and evaluation of geopressured-geothermal wells. Fairfax Foster Sutter No. 2 well, St. Mary Parish, Louisiana. Volume I. Completion and testing. Final report Author: Willits, M.H. Year: 1979 The Fairfax Foster Sutter No. 2 well, located in the East Franklin area of St. Mary Parish, Louisiana, is the first successful test of a geopressured-geothermal aquifer under the Well-of-Opportunity program. The section tested was the MA-6 sand of lower Miocene age which has produced large quantities of gas from the adjacent but structurally separated Garden City field. In the subject well the observed temperature was 270{sup 0}F (132{sup 0}C) and the measured gradient was 0.77 psi/ft. The gross sand thickness was 270 feet, the net sand thickness 190 feet, and the tested interval 58 net feet. The temperatures and pressures encountered approached the limits of the surface-recording bottomhole pressure gauge and particularly the single-conductor cables on which the gauges were run. The objectives of the tests were all accomplished, and data were obtained which will contribute to the overall assessment of the geopressured-geothermal resource of the Upper Gulf of Mexico basin. In general, the gas solubility (22.8 scf/bbl) was as expected for the temperature, pressure, and salinity of the brine. The produced water was more saline than expected (160,000 mg/l). The high concentrations of dissolved solids, coupled with the evolution of CO{sub 2} from these waters during production, created a scaling problem in the tubular goods and surface equipment that will have to be addressed in future tests; DOE/ET/28460-1 Title: Investigation and evaluation of geopressured-geothermal wells. Fairfax Foster Sutter No. 2 well, St. Mary Parish, Louisiana. Volume I. Completion and testing. Final report Author: Willits, M.H. Year: 1979 The Fairfax Foster Sutter No. 2 well, located in the East Franklin area of St. Mary Parish, Louisiana, is the first successful test of a geopressured-geothermal aquifer under the Well-of-Opportunity program. The section tested was the MA-6 sand of lower Miocene age which has produced large quantities of gas from the adjacent but structurally separated Garden City field. In the subject well the observed temperature was 270{sup 0}F (132{sup 0}C) and the measured gradient was 0.77 psi/ft. The gross sand thickness was 270 feet, the net sand thickness 190 feet, and the tested interval 58 net feet. The temperatures and pressures encountered approached the limits of the surface-recording bottomhole pressure gauge and particularly the single-conductor cables on which the gauges were run. The objectives of the tests were all accomplished, and data were obtained which will contribute to the overall assessment of the geopressured-geothermal resource of the Upper Gulf of Mexico basin. In general, the gas solubility (22.8 scf/bbl) was as expected for the temperature, pressure, and salinity of the brine. The produced water was more saline than expected (160,000 mg/l). The high concentrations of dissolved solids, coupled with the evolution of CO{sub 2} from these waters during production, created a scaling problem in the tubular goods and surface equipment that will have to be addressed in future tests; DOE/ET/28460-1

11. [Image] A Geological and Geophysical Study of the Geothermal Energy Potential of Pilgrim Springs, Alaska


	The Pilgrim Springs geothermal area, located about 75 km north of Nome, was the subject of an intensive, reconnaissance-level geophysical and geological study during a 90-day period in the summer of 1979. ...
	Citation Citation Citation Abstract Copy Title: A Geological and Geophysical Study of the Geothermal Energy Potential of Pilgrim Springs, Alaska Author: Turner, Donald L. [ed.] Year: 1980 The Pilgrim Springs geothermal area, located about 75 km north of Nome, was the subject of an intensive, reconnaissance-level geophysical and geological study during a 90-day period in the summer of 1979. The thermal springs are located in a northeast-oriented, oval area of thawed ground approximately 1.5 km{sup 2} in size, bordered on the north by the Pilgrim River. A second, much smaller, thermal anomaly was discovered about 3 km northeast of the main thawed area. Continuous permafrost in the surrounding region is on the order of 100 m thick. Present surface thermal spring discharge is {approx} 4.2 x 10{sup -3} m{sup 3} s{sup -1} (67 gallons/minute) of alkali-chloride-type water at a temperature of 81 C. The reason for its high salinity is not yet understood because of conflicting evidence for seawater vs. other possible water sources. Preliminary Na-K-Ca geothermometry suggests deep reservoir temperatures approaching 150 C, but interpretation of these results is difficult because of their dependence on an unknown water mixing history. Based on these estimates, and present surface and drill hole water temperatures, Pilgrim Springs would be classified as an intermediate-temperature, liquid-dominated geothermal system; UAG-R-271 Title: A Geological and Geophysical Study of the Geothermal Energy Potential of Pilgrim Springs, Alaska Author: Turner, Donald L. [ed.] Year: 1980 The Pilgrim Springs geothermal area, located about 75 km north of Nome, was the subject of an intensive, reconnaissance-level geophysical and geological study during a 90-day period in the summer of 1979. The thermal springs are located in a northeast-oriented, oval area of thawed ground approximately 1.5 km{sup 2} in size, bordered on the north by the Pilgrim River. A second, much smaller, thermal anomaly was discovered about 3 km northeast of the main thawed area. Continuous permafrost in the surrounding region is on the order of 100 m thick. Present surface thermal spring discharge is {approx} 4.2 x 10{sup -3} m{sup 3} s{sup -1} (67 gallons/minute) of alkali-chloride-type water at a temperature of 81 C. The reason for its high salinity is not yet understood because of conflicting evidence for seawater vs. other possible water sources. Preliminary Na-K-Ca geothermometry suggests deep reservoir temperatures approaching 150 C, but interpretation of these results is difficult because of their dependence on an unknown water mixing history. Based on these estimates, and present surface and drill hole water temperatures, Pilgrim Springs would be classified as an intermediate-temperature, liquid-dominated geothermal system; UAG-R-271

12. [Image] Geothermal exploration assessment and interpretation, Upper Klamath Lake Area, Klamath Basin, Oregon


	Data from public and private sources on the Klamath Basin geothermal resource are reviewed, synthesized, and reinterpreted. In this, the second and final phase of the work, geological, remote sensing, ...
	Citation Citation Citation Abstract Copy Title: Geothermal exploration assessment and interpretation, Upper Klamath Lake Area, Klamath Basin, Oregon Author: Stark, M. Year: 1980 Data from public and private sources on the Klamath Basin geothermal resource are reviewed, synthesized, and reinterpreted. In this, the second and final phase of the work, geological, remote sensing, geochemical, temperature gradient, gravity, aeromagnetic, and electrical resistivity data sets are examined. These data were derived from surveys concentrated on the east and west shores of Upper Klamath Lake. The geological, remote sensing, and potential field data suggest a few northeast-trending discontinuities, which cross the regional north-westerly strike. The near-surface distribution of warm water appears to be related to the intersections of these lineaments and northwest-trending faults. The groundwater geochemical data are reviewed and the various reservoir temperature estimates compared. Particular attention is given to specific electrical conductivities of waters as an interpretational aid to the subsurface resistivity results. A clear trend emerges in the Klamath Falls/Olene Gap area; hotter waters are associated with higher specific conductivities. In the Nuss Lake/Stukel Mountain area the opposite trend prevails, although the relationship is somewhat equivocal; LBL-10140 Title: Geothermal exploration assessment and interpretation, Upper Klamath Lake Area, Klamath Basin, Oregon Author: Stark, M. Year: 1980 Data from public and private sources on the Klamath Basin geothermal resource are reviewed, synthesized, and reinterpreted. In this, the second and final phase of the work, geological, remote sensing, geochemical, temperature gradient, gravity, aeromagnetic, and electrical resistivity data sets are examined. These data were derived from surveys concentrated on the east and west shores of Upper Klamath Lake. The geological, remote sensing, and potential field data suggest a few northeast-trending discontinuities, which cross the regional north-westerly strike. The near-surface distribution of warm water appears to be related to the intersections of these lineaments and northwest-trending faults. The groundwater geochemical data are reviewed and the various reservoir temperature estimates compared. Particular attention is given to specific electrical conductivities of waters as an interpretational aid to the subsurface resistivity results. A clear trend emerges in the Klamath Falls/Olene Gap area; hotter waters are associated with higher specific conductivities. In the Nuss Lake/Stukel Mountain area the opposite trend prevails, although the relationship is somewhat equivocal; LBL-10140

13. [Image] Geothermal direct heat project, Marlin, Texas: Environmental assessment


	The Federal action addressed is retrofitting a heating and hot water system in a hospital at Marlin, Texas, with a geothermal preheat system. The project will be located within the existing hospital boiler ...
	Citation Citation Citation Abstract Copy Title: Geothermal direct heat project, Marlin, Texas: Environmental assessment Year: 1979 The Federal action addressed is retrofitting a heating and hot water system in a hospital at Marlin, Texas, with a geothermal preheat system. The project will be located within the existing hospital boiler room. One supply well will be drilled in an existing adjacent parking lot. Fluid disposal from operation will depend on fluid properties and may be by surface disposal to existing street drains, by surface disposal to a new drainage system, or by injection into a new injection well, depending on total dissolved solids (TDS) content. Environmental impacts of construction are expected to be small because of the existing structures and paved areas. Construction run-off and geothermal flow-test fluid will pass through a small pond in the city park, lowering its water quality, at least temporarily. Construction noise is not expected to be out of character with existing noises around the hospital. Project operation is not expected to produce significant impacts because of the decision point to determine fluid composition prior to designating a disposal method. Injection would be into a saline aquifer, and surface discharge would not appreciably lower water quality in the Brazos River; DOE/EA-0067 Title: Geothermal direct heat project, Marlin, Texas: Environmental assessment Year: 1979 The Federal action addressed is retrofitting a heating and hot water system in a hospital at Marlin, Texas, with a geothermal preheat system. The project will be located within the existing hospital boiler room. One supply well will be drilled in an existing adjacent parking lot. Fluid disposal from operation will depend on fluid properties and may be by surface disposal to existing street drains, by surface disposal to a new drainage system, or by injection into a new injection well, depending on total dissolved solids (TDS) content. Environmental impacts of construction are expected to be small because of the existing structures and paved areas. Construction run-off and geothermal flow-test fluid will pass through a small pond in the city park, lowering its water quality, at least temporarily. Construction noise is not expected to be out of character with existing noises around the hospital. Project operation is not expected to produce significant impacts because of the decision point to determine fluid composition prior to designating a disposal method. Injection would be into a saline aquifer, and surface discharge would not appreciably lower water quality in the Brazos River; DOE/EA-0067

14. [Image] Downhole Heat Exchanger for Shallow Geothermal Systems: Performance, Economics and Applicability


	Heat exchangers located within the wellbore of shallow geothermal resources are presently being used at several locations in the U.S. These heat exchangers are referred to as downhole heat exchangers. ...
	Citation Citation Citation Abstract Copy Title: Downhole Heat Exchanger for Shallow Geothermal Systems: Performance, Economics and Applicability Author: Reistad, G. M. Heat exchangers located within the wellbore of shallow geothermal resources are presently being used at several locations in the U.S. These heat exchangers are referred to as downhole heat exchangers. Such installations can have thermal energy output capacities as high as 1 MW for space heating with source water temperature of 90 to 100°C. This work reports on the performance and economics of downhole heat exchangers relative to the alternative geothermal system which pumps the fluid out of the ground and uses heat exchangers located at the earth's surface. Results indicate that the downhole heat exchange systems for capacity requirements less than about 500 to 100 kW are in general more desirable than the surface heat exchange systems for low capacity (less than about 500 to 1000 kW) requirements and shallow geothermal resources. For higher capacities the surface heat exchange systems become more economical. Furthermore, for large depths, the high capacities available from the surface systems are required in order to make the geothermal energy competitive with other sources Title: Downhole Heat Exchanger for Shallow Geothermal Systems: Performance, Economics and Applicability Author: Reistad, G. M. Heat exchangers located within the wellbore of shallow geothermal resources are presently being used at several locations in the U.S. These heat exchangers are referred to as downhole heat exchangers. Such installations can have thermal energy output capacities as high as 1 MW for space heating with source water temperature of 90 to 100°C. This work reports on the performance and economics of downhole heat exchangers relative to the alternative geothermal system which pumps the fluid out of the ground and uses heat exchangers located at the earth's surface. Results indicate that the downhole heat exchange systems for capacity requirements less than about 500 to 100 kW are in general more desirable than the surface heat exchange systems for low capacity (less than about 500 to 1000 kW) requirements and shallow geothermal resources. For higher capacities the surface heat exchange systems become more economical. Furthermore, for large depths, the high capacities available from the surface systems are required in order to make the geothermal energy competitive with other sources

15. [Image] Industry Participation in DOE-Sponsored Geopressured Geothermal Resource Development


	The Salt Water Disposal Study reviewed subsurface salt water disposal experience on the Texas and Louisiana Gulf Coast. This preliminary study concluded that subsurface brine disposal should be possible ...
	Citation Citation Citation Abstract Copy Title: Industry Participation in DOE-Sponsored Geopressured Geothermal Resource Development Author: Coffer, H. F Year: 1979 The Salt Water Disposal Study reviewed subsurface salt water disposal experience on the Texas and Louisiana Gulf Coast. This preliminary study concluded that subsurface brine disposal should be possible in the areas of interest with adequate evaluation of the geology of each area and a well designed and constructed surface and subsurface facility. The industry survey indicated general satisfactory with the technical design of the resource evaluation program but felt the program should be moving faster. Excellent communication with industry had been maintained through the forum meetings and the status reports Title: Industry Participation in DOE-Sponsored Geopressured Geothermal Resource Development Author: Coffer, H. F Year: 1979 The Salt Water Disposal Study reviewed subsurface salt water disposal experience on the Texas and Louisiana Gulf Coast. This preliminary study concluded that subsurface brine disposal should be possible in the areas of interest with adequate evaluation of the geology of each area and a well designed and constructed surface and subsurface facility. The industry survey indicated general satisfactory with the technical design of the resource evaluation program but felt the program should be moving faster. Excellent communication with industry had been maintained through the forum meetings and the status reports

16. [Image] Sweet Lake Geopressured-Geothermal Project, Magma Gulf-Technadril/DOE Amoco FEE Volume II: Surface Installations Reservoir Testing; Annual Report for the Period February 28, 1981-February 10, 1982


	The Magma Gulf-Technadril/Department of Energy Amoco Fee # 1 (production) and salt water disposal wells were drilled in the period from August, 1980 to February 1981. Surface facilities were designed and ...
	Citation Citation Citation Abstract Copy Title: Sweet Lake Geopressured-Geothermal Project, Magma Gulf-Technadril/DOE Amoco FEE Volume II: Surface Installations Reservoir Testing; Annual Report for the Period February 28, 1981-February 10, 1982 Author: Hoffman, K. S. (ed.) Year: 1982 The Magma Gulf-Technadril/Department of Energy Amoco Fee # 1 (production) and salt water disposal wells were drilled in the period from August, 1980 to February 1981. Surface facilities were designed and constructed during March-June 1981. Flow testing began in June 1981 and continued until February, 1982 Title: Sweet Lake Geopressured-Geothermal Project, Magma Gulf-Technadril/DOE Amoco FEE Volume II: Surface Installations Reservoir Testing; Annual Report for the Period February 28, 1981-February 10, 1982 Author: Hoffman, K. S. (ed.) Year: 1982 The Magma Gulf-Technadril/Department of Energy Amoco Fee # 1 (production) and salt water disposal wells were drilled in the period from August, 1980 to February 1981. Surface facilities were designed and constructed during March-June 1981. Flow testing began in June 1981 and continued until February, 1982

17. [Image] Environmental Monitoring for the Hot Dry Rock Geothermal Energy Development Project, Annual Report for the Period July 1975-June 1976


	For the last four years, the Los Alamos Scientific Laboratory has been investigating the feasibility demonstration of a technique for extracting geothermal energy from hot dry rock existing at moderate ...
	Citation Citation Citation Abstract Copy Title: Environmental Monitoring for the Hot Dry Rock Geothermal Energy Development Project, Annual Report for the Period July 1975-June 1976 Author: Pettitt, Roland A. Year: 1976 For the last four years, the Los Alamos Scientific Laboratory has been investigating the feasibility demonstration of a technique for extracting geothermal energy from hot dry rock existing at moderate depths beneath the surface of the earth. In the hot dry rock (HDR) concept, a manmade geothermal reservoir would be formed by drilling an initial borehole into a region of hot rock, creating a large fracture at the bottom of the hole, then intersecting the fractured area with a second borehole. The heat contained in this underground reservoir would then be brought to the surface by the circulation of water through the system. The objectives of this environmental monitoring report are to provide a brief conceptual and historical summary of the Hot Dry Rock Geothermal Project, a brief overview of the environmental monitoring responsibilities and activities of the Los Alamos Scientific Laboratory, and descriptions of the studies, problems, and results obtained from the various monitoring programs. Included are descriptions of the work that has been done in three major monitoring areas: (1) water quality, both surface and subsurface; (2) seismicity, with a discussion of the monitoring strategy of regional, local, and close-in detection networks; and (3) climatology. The purpose of these programs is to record baseline data, define potential effects from the project activities, and determine and record any impacts that may occur. The development of the hot dry rock geothermal energy resource and associated energy extraction technology is a new field of endeavor, with no established environmental guidelines. It is doubtful if the problems encountered and solutions devised in traditional geothermal systems will apply directly to hot dry rock development. Therefore, the impacts that are encountered in this project will be of particular value in making future environmental Assessments for this type of energy resource development in other locations in different geologic settings. By the end of the reporting period, there had been no unacceptable impacts on the environment in any of the three monitoring areas Title: Environmental Monitoring for the Hot Dry Rock Geothermal Energy Development Project, Annual Report for the Period July 1975-June 1976 Author: Pettitt, Roland A. Year: 1976 For the last four years, the Los Alamos Scientific Laboratory has been investigating the feasibility demonstration of a technique for extracting geothermal energy from hot dry rock existing at moderate depths beneath the surface of the earth. In the hot dry rock (HDR) concept, a manmade geothermal reservoir would be formed by drilling an initial borehole into a region of hot rock, creating a large fracture at the bottom of the hole, then intersecting the fractured area with a second borehole. The heat contained in this underground reservoir would then be brought to the surface by the circulation of water through the system. The objectives of this environmental monitoring report are to provide a brief conceptual and historical summary of the Hot Dry Rock Geothermal Project, a brief overview of the environmental monitoring responsibilities and activities of the Los Alamos Scientific Laboratory, and descriptions of the studies, problems, and results obtained from the various monitoring programs. Included are descriptions of the work that has been done in three major monitoring areas: (1) water quality, both surface and subsurface; (2) seismicity, with a discussion of the monitoring strategy of regional, local, and close-in detection networks; and (3) climatology. The purpose of these programs is to record baseline data, define potential effects from the project activities, and determine and record any impacts that may occur. The development of the hot dry rock geothermal energy resource and associated energy extraction technology is a new field of endeavor, with no established environmental guidelines. It is doubtful if the problems encountered and solutions devised in traditional geothermal systems will apply directly to hot dry rock development. Therefore, the impacts that are encountered in this project will be of particular value in making future environmental Assessments for this type of energy resource development in other locations in different geologic settings. By the end of the reporting period, there had been no unacceptable impacts on the environment in any of the three monitoring areas

18. [Image] Low-Temperature Geothermal Potential of the Ojo Caliente Warm Springs Area, Northern New Mexico


	A detailed geochemical investigation of 17 waters (thermal and cold, mineralized and dilute) was performed in the Ojo Caliente-La Madera area. Two types of thermomineral waters have separate and distinctive ...
	Citation Citation Citation Abstract Copy Title: Low-Temperature Geothermal Potential of the Ojo Caliente Warm Springs Area, Northern New Mexico Author: Vuataz, F.D. Year: 1984 A detailed geochemical investigation of 17 waters (thermal and cold, mineralized and dilute) was performed in the Ojo Caliente-La Madera area. Two types of thermomineral waters have separate and distinctive geologic, geochemical, and geothermal characteristics. The water from Ojo Caliente Resort emerges with temperatures less than or equal to 54/sup 0/C from a Precambrian metarhyolite. Its chemistry, typically Na-HCO/sub 3/, has a total mineralization of 3600 mg/l. Isotopic studies have shown that the thermal water emerges from the springs and a hot well without significant mixing with the cold shallow aquifer of the valley alluvium. However, the cold aquifer adjacent to the resort does contain varying amounts of thermal water that originates from the warm spring system. Geothermometry calculations indicate that the thermal water may be as hot as 85/sup 0/C at depth before its ascent toward surface. Thermodynamic computations on the reaction states of numerous mineral phases suggest that the thermal water will not cause major scaling problems if the hot water is utilized for direct-use geothermal applications. By means of a network of very shallow holes, temperature and electrical conductivity anomalies have been found elsewhere in the valley around Ojo Caliente, and resistivity soundings have confirmed the presence of a plume of thermal water entering the shallow aquifer. The group of lukewarm springs around La Madera, with temperatures less than or equal to 29/sup 0/C, chemical type of NaCaMg-HCO/sub 3/Cl and with a total mineralization less than or equal to 1500 mg/l behaves as a different system without any Apparent relation to the Ojo Caliente system. Its temperature at depth is not believed to exceed 35 to 40/sup 0/C Title: Low-Temperature Geothermal Potential of the Ojo Caliente Warm Springs Area, Northern New Mexico Author: Vuataz, F.D. Year: 1984 A detailed geochemical investigation of 17 waters (thermal and cold, mineralized and dilute) was performed in the Ojo Caliente-La Madera area. Two types of thermomineral waters have separate and distinctive geologic, geochemical, and geothermal characteristics. The water from Ojo Caliente Resort emerges with temperatures less than or equal to 54/sup 0/C from a Precambrian metarhyolite. Its chemistry, typically Na-HCO/sub 3/, has a total mineralization of 3600 mg/l. Isotopic studies have shown that the thermal water emerges from the springs and a hot well without significant mixing with the cold shallow aquifer of the valley alluvium. However, the cold aquifer adjacent to the resort does contain varying amounts of thermal water that originates from the warm spring system. Geothermometry calculations indicate that the thermal water may be as hot as 85/sup 0/C at depth before its ascent toward surface. Thermodynamic computations on the reaction states of numerous mineral phases suggest that the thermal water will not cause major scaling problems if the hot water is utilized for direct-use geothermal applications. By means of a network of very shallow holes, temperature and electrical conductivity anomalies have been found elsewhere in the valley around Ojo Caliente, and resistivity soundings have confirmed the presence of a plume of thermal water entering the shallow aquifer. The group of lukewarm springs around La Madera, with temperatures less than or equal to 29/sup 0/C, chemical type of NaCaMg-HCO/sub 3/Cl and with a total mineralization less than or equal to 1500 mg/l behaves as a different system without any Apparent relation to the Ojo Caliente system. Its temperature at depth is not believed to exceed 35 to 40/sup 0/C

19. [Image] DHE (Downhole Heat Exchangers)


	The use of downhole heat exchangers (DHE) for residential or commercial space and domestic water heating and other applications has several desirable features. Systems are nearly or completely passive ...
	Citation Citation Citation Abstract Copy Title: DHE (Downhole Heat Exchangers) Author: Culver, G. Year: 1990 The use of downhole heat exchangers (DHE) for residential or commercial space and domestic water heating and other applications has several desirable features. Systems are nearly or completely passive -- that is, no or very little geothermal water or steam is produced from the well either reducing or completely eliminating surface environmental concerns and the need for disposal systems or injection wells. Initial cost of pumps and installation are eliminated or reduced along with pumping power costs and maintenance costs associated with pumping often corrosive geothermal fluids. Many residential and small commercial systems do not require circulating pumps because the density difference in the incoming and outgoing sides of the loop are sufficient to overcome circulating friction losses in the entire system. The major disadvantage of DHEs is their dependence on natural heat flow. In areas where geological conditions provide high permeability and a natural hydraulic gradient, DHEs can provide a substantial quantity of heat. A single 500-ft (152 m) well in Klamath Falls, Oregon, supplies over one megawatt thermal and output is apparently limited by the surface area of pipe that can be installed in the well bore. In contrast, DHEs used in conjunction with heat pumps may supply less than 8 KW from a well of similar depth. Here output is limited by conductive heat flow with perhaps a small contribution from convection near the well bore. The highest capacity DHE reported to date, in Turkey, supplies 6 MW thermal from an 820-ft (250 m) well. There were two main goals for this project. The first was to gather, disseminate and exchange internationally information on DHEs. The second was to perform experiments that would provide insight into well bore/aquifer interaction and thereby provide more information on which to base DHE designs. 27 refs., 31 figs., 3 tabs. Title: DHE (Downhole Heat Exchangers) Author: Culver, G. Year: 1990 The use of downhole heat exchangers (DHE) for residential or commercial space and domestic water heating and other applications has several desirable features. Systems are nearly or completely passive -- that is, no or very little geothermal water or steam is produced from the well either reducing or completely eliminating surface environmental concerns and the need for disposal systems or injection wells. Initial cost of pumps and installation are eliminated or reduced along with pumping power costs and maintenance costs associated with pumping often corrosive geothermal fluids. Many residential and small commercial systems do not require circulating pumps because the density difference in the incoming and outgoing sides of the loop are sufficient to overcome circulating friction losses in the entire system. The major disadvantage of DHEs is their dependence on natural heat flow. In areas where geological conditions provide high permeability and a natural hydraulic gradient, DHEs can provide a substantial quantity of heat. A single 500-ft (152 m) well in Klamath Falls, Oregon, supplies over one megawatt thermal and output is apparently limited by the surface area of pipe that can be installed in the well bore. In contrast, DHEs used in conjunction with heat pumps may supply less than 8 KW from a well of similar depth. Here output is limited by conductive heat flow with perhaps a small contribution from convection near the well bore. The highest capacity DHE reported to date, in Turkey, supplies 6 MW thermal from an 820-ft (250 m) well. There were two main goals for this project. The first was to gather, disseminate and exchange internationally information on DHEs. The second was to perform experiments that would provide insight into well bore/aquifer interaction and thereby provide more information on which to base DHE designs. 27 refs., 31 figs., 3 tabs.

20. [Image] Liquid-Fluidized-Bed Heat Exchanger Design Parameters


	Liquid-fluidized-bed heat exchangers prevent scale accumulation on heat transfer surfaces and reduce the required heat transfer surface when scaling fluids, such as geothermal water, are used as the primary ...
	Citation Citation Citation Abstract Copy Title: Liquid-Fluidized-Bed Heat Exchanger Design Parameters Author: Allen, C.A. Year: 1978 Liquid-fluidized-bed heat exchangers prevent scale accumulation on heat transfer surfaces and reduce the required heat transfer surface when scaling fluids, such as geothermal water, are used as the primary or working fluid. Liquid-fluidized-bed heat exchangers, principles of operation, and design parameters are described. Horizontal and vertical assemblies are discussed, including problems encountered with both designs. Bed-side heat transfer coefficients are given for limited cases, and a correlation is provided for calculating heat transfer coefficients for horizontal assemblies. A design example for a 60 kW/sub (e)/ (60 kW/sub (electric)/ preheater is included Title: Liquid-Fluidized-Bed Heat Exchanger Design Parameters Author: Allen, C.A. Year: 1978 Liquid-fluidized-bed heat exchangers prevent scale accumulation on heat transfer surfaces and reduce the required heat transfer surface when scaling fluids, such as geothermal water, are used as the primary or working fluid. Liquid-fluidized-bed heat exchangers, principles of operation, and design parameters are described. Horizontal and vertical assemblies are discussed, including problems encountered with both designs. Bed-side heat transfer coefficients are given for limited cases, and a correlation is provided for calculating heat transfer coefficients for horizontal assemblies. A design example for a 60 kW/sub (e)/ (60 kW/sub (electric)/ preheater is included

21. [Image] Thermal springs list for the United States; National Oceanic and Atmospheric Administration Key to Geophysical Records Documentation No. 12


	The compilation has 1702 thermal spring locations in 23 of the 50 States, arranged alphabetically by State (Postal Service abbreviation) and degrees of latitude and longitude within the State. It shows ...
	Citation Citation Citation Abstract Copy Title: Thermal springs list for the United States; National Oceanic and Atmospheric Administration Key to Geophysical Records Documentation No. 12 Author: Berry, G.W. Year: 1980 The compilation has 1702 thermal spring locations in 23 of the 50 States, arranged alphabetically by State (Postal Service abbreviation) and degrees of latitude and longitude within the State. It shows spring name, surface temperature in degrees Fahrenheit and degrees Celsius; USGS Professional Paper 492 number, USGS Circular 790 number, NOAA number, north to south on each degree of latitude and longitude of the listed. USGS 1:250,000-scale (AMS) map; and the USGS topographic map coverage, 1:63360- or 1:62500-scale (15-minute) or 1:24000-scale (7.5-minute) quadrangle also included is an alphabetized list showing only the spring name and the State in which it is located. Unnamed springs are omitted. The list includes natural surface hydrothermal features: springs, pools, mud pots, mud volcanoes, geysers, fumaroles, and steam vents at temperature of 20{sup 0}C (68[sup 0}F) or greater. It does not include wells or mines, except at sites where they supplement or replace natural vents presently or recently active, or, in some places, where orifices are not distinguishable as natural or artificial. The listed springs are located on the USGS 1:250,000 (AMS) topographic maps. (MHR) Title: Thermal springs list for the United States; National Oceanic and Atmospheric Administration Key to Geophysical Records Documentation No. 12 Author: Berry, G.W. Year: 1980 The compilation has 1702 thermal spring locations in 23 of the 50 States, arranged alphabetically by State (Postal Service abbreviation) and degrees of latitude and longitude within the State. It shows spring name, surface temperature in degrees Fahrenheit and degrees Celsius; USGS Professional Paper 492 number, USGS Circular 790 number, NOAA number, north to south on each degree of latitude and longitude of the listed. USGS 1:250,000-scale (AMS) map; and the USGS topographic map coverage, 1:63360- or 1:62500-scale (15-minute) or 1:24000-scale (7.5-minute) quadrangle also included is an alphabetized list showing only the spring name and the State in which it is located. Unnamed springs are omitted. The list includes natural surface hydrothermal features: springs, pools, mud pots, mud volcanoes, geysers, fumaroles, and steam vents at temperature of 20{sup 0}C (68[sup 0}F) or greater. It does not include wells or mines, except at sites where they supplement or replace natural vents presently or recently active, or, in some places, where orifices are not distinguishable as natural or artificial. The listed springs are located on the USGS 1:250,000 (AMS) topographic maps. (MHR)

22. [Image] Dipole-Dipole Resistivity Surveys, Roosevelt Hot Springs KGRA. Final Report, Volume 2


	Dipole-dipole Resistivity surveys were conducted at Roosevelt Hot Springs KGRA. Three different dipole spacings were used; 99km of traverse line were surveyed with 100m dipoles, 50km with 300m dipoles, ...
	Citation Citation Citation Abstract Copy Title: Dipole-Dipole Resistivity Surveys, Roosevelt Hot Springs KGRA. Final Report, Volume 2 Author: Ward, S.H. Year: 1976 Dipole-dipole Resistivity surveys were conducted at Roosevelt Hot Springs KGRA. Three different dipole spacings were used; 99km of traverse line were surveyed with 100m dipoles, 50km with 300m dipoles, and 44km with 1km dipoles. The objectives of the Resistivity surveying were to detect and delineate regions of low Resistivity associated with fracturing, brines, high temperatures, and clay alteration. The Resistivity of rocks that are typical of hydrothermal environments is due to two main conduction mechanisms: (1) electrolytic conduction through pores and fractures; and (2) surface conduction due to a thin zone of cations attracted to those mineral surfaces with net negative charges (especially clay minerals). For saturated rocks, the Resistivity due to electrolytic conduction is a function of the effective porosity of the fractured rock, of the temperature, and of the salinity of the fluid filling the pores and fractures. The Resistivity decreases as the effective porosity, water saturation, salinity, and temperature increase. The presence of clay minerals and pyrite will also decrease the Resistivity Title: Dipole-Dipole Resistivity Surveys, Roosevelt Hot Springs KGRA. Final Report, Volume 2 Author: Ward, S.H. Year: 1976 Dipole-dipole Resistivity surveys were conducted at Roosevelt Hot Springs KGRA. Three different dipole spacings were used; 99km of traverse line were surveyed with 100m dipoles, 50km with 300m dipoles, and 44km with 1km dipoles. The objectives of the Resistivity surveying were to detect and delineate regions of low Resistivity associated with fracturing, brines, high temperatures, and clay alteration. The Resistivity of rocks that are typical of hydrothermal environments is due to two main conduction mechanisms: (1) electrolytic conduction through pores and fractures; and (2) surface conduction due to a thin zone of cations attracted to those mineral surfaces with net negative charges (especially clay minerals). For saturated rocks, the Resistivity due to electrolytic conduction is a function of the effective porosity of the fractured rock, of the temperature, and of the salinity of the fluid filling the pores and fractures. The Resistivity decreases as the effective porosity, water saturation, salinity, and temperature increase. The presence of clay minerals and pyrite will also decrease the Resistivity

23. [Image] Geologic Interpretation of the Geothermal Potential of the North Bonneville Area


	Possible geothermal development for the township of North Bonneville, Washington is being investigated because of the proximity of the town to hot springs in a geologic province of good geothermal potential. ...
	Citation Citation Citation Abstract Copy Title: Geologic Interpretation of the Geothermal Potential of the North Bonneville Area Author: Nielson, D.L. Year: 1980 Possible geothermal development for the township of North Bonneville, Washington is being investigated because of the proximity of the town to hot springs in a geologic province of good geothermal potential. Surface expression of geothermal resources is provided by conduits through an impermeable reservoir cap and is therefore generally structurally controlled. Near North Bonneville the geologic formations that underlie potential drilling sites are the Eagle Creek formation and the Ohanpecosh Formation. The Lower Miocene Eagle Creek Formation is composed of poorly consolidated volcanic conglomerates, sandstOnes, tuffs, and includes a few minor interbedded lava flows. The Eocene-Oligiocene Ohanapecosh (Weigle) Formation in its nearest exposures to North Bonneville is composed of Volcaniclastics and lava flows. The Ohanapecosh has been altered to zeolites and clays and is therefore Well consolidated and impermeable. The lack of permeability provides the necessary reservoir cap for any geothermal system that may be present at depth. This formation, to the northeast, in the Wind River drainage is greater than 19,000 ft. thick. Circulation of geothermal heated water from this thick sequence of impermeable strata must be associated with penetrating fracture zones Title: Geologic Interpretation of the Geothermal Potential of the North Bonneville Area Author: Nielson, D.L. Year: 1980 Possible geothermal development for the township of North Bonneville, Washington is being investigated because of the proximity of the town to hot springs in a geologic province of good geothermal potential. Surface expression of geothermal resources is provided by conduits through an impermeable reservoir cap and is therefore generally structurally controlled. Near North Bonneville the geologic formations that underlie potential drilling sites are the Eagle Creek formation and the Ohanpecosh Formation. The Lower Miocene Eagle Creek Formation is composed of poorly consolidated volcanic conglomerates, sandstOnes, tuffs, and includes a few minor interbedded lava flows. The Eocene-Oligiocene Ohanapecosh (Weigle) Formation in its nearest exposures to North Bonneville is composed of Volcaniclastics and lava flows. The Ohanapecosh has been altered to zeolites and clays and is therefore Well consolidated and impermeable. The lack of permeability provides the necessary reservoir cap for any geothermal system that may be present at depth. This formation, to the northeast, in the Wind River drainage is greater than 19,000 ft. thick. Circulation of geothermal heated water from this thick sequence of impermeable strata must be associated with penetrating fracture zones

24. [Image] Packer injection test data from sites on fractured rock


	Packer tests conducted in drill holes in fractured rocks at dam and tunnel sites are the primary data for characterizing permeabilities, fracture spacings, apertures, and porosities. A collection of data, ...
	Citation Citation Citation Abstract Copy Title: Packer injection test data from sites on fractured rock Author: Snow, D.T. Year: 1979 Packer tests conducted in drill holes in fractured rocks at dam and tunnel sites are the primary data for characterizing permeabilities, fracture spacings, apertures, and porosities. A collection of data, numbering 5862 tests at 41 sites between the surface and 200 m depth in 12 different fractured crystalline rock types is reported on microfiche. In addition to the discharge and collar pressure, each entry records the angle and size of drill hole, the inclined depths to the top and bottom of the test interval, the depth to the static water level and the bottom of overburden. A summary of computed permeabilities, porosities, fracture spacings, and apertures averaged for several depth zons at each site are tabulated, and publications derived from the data are referenced; LBL-10080 Title: Packer injection test data from sites on fractured rock Author: Snow, D.T. Year: 1979 Packer tests conducted in drill holes in fractured rocks at dam and tunnel sites are the primary data for characterizing permeabilities, fracture spacings, apertures, and porosities. A collection of data, numbering 5862 tests at 41 sites between the surface and 200 m depth in 12 different fractured crystalline rock types is reported on microfiche. In addition to the discharge and collar pressure, each entry records the angle and size of drill hole, the inclined depths to the top and bottom of the test interval, the depth to the static water level and the bottom of overburden. A summary of computed permeabilities, porosities, fracture spacings, and apertures averaged for several depth zons at each site are tabulated, and publications derived from the data are referenced; LBL-10080

25. [Image] The Cody Hydrothermal System


	The hot springs of Colter's Hell are the surface manifestations of a much larger hydrothermal system. That system has been studied to define its extent, maximum temperature, and mechanism of operation. ...
	Citation Citation Citation Abstract Copy Title: The Cody Hydrothermal System Author: Heasler, H.P. Year: 1982 The hot springs of Colter's Hell are the surface manifestations of a much larger hydrothermal system. That system has been studied to define its extent, maximum temperature, and mechanism of operation. The study area covers 2700 km/sup 2/ (1040 mi/sup 2/) in northwest Wyoming. Research and field work included locating and sampling the hot springs, geologic mapping, thermal logging of available wells, measuring thermal conductivities, analyzing over 200 oil and gas well bottom-hole temperatures, and compiling and analyzing hydrologic data. These data were used to generate a model for the hydrothermal system Title: The Cody Hydrothermal System Author: Heasler, H.P. Year: 1982 The hot springs of Colter's Hell are the surface manifestations of a much larger hydrothermal system. That system has been studied to define its extent, maximum temperature, and mechanism of operation. The study area covers 2700 km/sup 2/ (1040 mi/sup 2/) in northwest Wyoming. Research and field work included locating and sampling the hot springs, geologic mapping, thermal logging of available wells, measuring thermal conductivities, analyzing over 200 oil and gas well bottom-hole temperatures, and compiling and analyzing hydrologic data. These data were used to generate a model for the hydrothermal system

26. [Image] Geothermal energy enhancement by thermal fracture. [REX (Rock Energy Extraction)]


	A large, vertical, circular fracture created deep within hot rock is connected to the surface through two holes. The inlet provides a source of cold water and the outlet extracts heated water. Cooling ...
	Citation Citation Citation Abstract Copy Title: Geothermal energy enhancement by thermal fracture. [REX (Rock Energy Extraction)] Author: Demuth, R.B. Year: 1980 A large, vertical, circular fracture created deep within hot rock is connected to the surface through two holes. The inlet provides a source of cold water and the outlet extracts heated water. Cooling of the rock produces thermal stresses that fracture the rock adjacent to the primary crack, thereby enhancing the heat extraction rate by means of convective transport. The properties of the thermal fracture network vary with position and time. The REX code for high-speed computer was written and used to study the coupled processes of primary-crack flow and lateral thermal fracture heat transport. Calculations for elapsed times of 100 y show that thermal fracture enhancement can double the heat extraction rate over the results from conduction alone. Long-term enhancement predictions depend on data from rock-mechanics studies, which the REX code is prepared to accept as they become available.; LA-8428 Title: Geothermal energy enhancement by thermal fracture. [REX (Rock Energy Extraction)] Author: Demuth, R.B. Year: 1980 A large, vertical, circular fracture created deep within hot rock is connected to the surface through two holes. The inlet provides a source of cold water and the outlet extracts heated water. Cooling of the rock produces thermal stresses that fracture the rock adjacent to the primary crack, thereby enhancing the heat extraction rate by means of convective transport. The properties of the thermal fracture network vary with position and time. The REX code for high-speed computer was written and used to study the coupled processes of primary-crack flow and lateral thermal fracture heat transport. Calculations for elapsed times of 100 y show that thermal fracture enhancement can double the heat extraction rate over the results from conduction alone. Long-term enhancement predictions depend on data from rock-mechanics studies, which the REX code is prepared to accept as they become available.; LA-8428

27. [Image] Dipole-Dipole Resistivity Survey of a Portion of the Coso Hot Springs KGRA, Inyo County, California


	A detailed electrical resistivity survey of 54 line-km was completed at the Coso Hot Springs KGRA in September 1977. This survey has defined a bedrock resistivity low at least 4 sq mi (10 sq km) in extent ...
	Citation Citation Citation Abstract Copy Title: Dipole-Dipole Resistivity Survey of a Portion of the Coso Hot Springs KGRA, Inyo County, California Author: Fox, R.C. Year: 1978 A detailed electrical resistivity survey of 54 line-km was completed at the Coso Hot Springs KGRA in September 1977. This survey has defined a bedrock resistivity low at least 4 sq mi (10 sq km) in extent associated with the geothermal system at Coso. The boundaries of this low are generally well defined to the north and west but not as well to the south where an approximate southern limit has been determined. The bedrock resistivity low merges with an observed resistivity low over gravel fill east of Coso Hot Springs. A complex horizontal and vertical resistivity structure of the surveyed area has been defined which precludes the use of layered-earth or two-dimensional interpretive models for much of the surveyed area. In general the survey data indicate that a 10 to 20 ohm-meter zone extends from near surface to a depth greater than 750 meters within the geothermal system. This zone is bordered to the north and west by bedrock resistivities greater than 200 ohm-meters and to the south by bedrock resistivities greater than 50 ohm-meters. A combination of observed increases in: (1) fracture density (higher permeability), (2) alteration (high clay content), and (3) temperatures (higher dissolved solid content of ground water) within the bedrock low explain its presence Title: Dipole-Dipole Resistivity Survey of a Portion of the Coso Hot Springs KGRA, Inyo County, California Author: Fox, R.C. Year: 1978 A detailed electrical resistivity survey of 54 line-km was completed at the Coso Hot Springs KGRA in September 1977. This survey has defined a bedrock resistivity low at least 4 sq mi (10 sq km) in extent associated with the geothermal system at Coso. The boundaries of this low are generally well defined to the north and west but not as well to the south where an approximate southern limit has been determined. The bedrock resistivity low merges with an observed resistivity low over gravel fill east of Coso Hot Springs. A complex horizontal and vertical resistivity structure of the surveyed area has been defined which precludes the use of layered-earth or two-dimensional interpretive models for much of the surveyed area. In general the survey data indicate that a 10 to 20 ohm-meter zone extends from near surface to a depth greater than 750 meters within the geothermal system. This zone is bordered to the north and west by bedrock resistivities greater than 200 ohm-meters and to the south by bedrock resistivities greater than 50 ohm-meters. A combination of observed increases in: (1) fracture density (higher permeability), (2) alteration (high clay content), and (3) temperatures (higher dissolved solid content of ground water) within the bedrock low explain its presence

28. [Image] Hot Dry Rock Geothermal Energy Development Program: Annual Report, Fiscal Year 1987


	During fiscal year 1987, emphasis in the Hot Dry Rock Geothermal Energy Development Program was on preparations for a " Long-Term Flow Test " of the "Phase II" or "Engineering" hot dry rock energy system ...
	Citation Citation Citation Abstract Copy Title: Hot Dry Rock Geothermal Energy Development Program: Annual Report, Fiscal Year 1987 Author: Smith, M.C. Year: 1989 During fiscal year 1987, emphasis in the Hot Dry Rock Geothermal Energy Development Program was on preparations for a " Long-Term Flow Test " of the "Phase II" or "Engineering" hot dry rock energy system at Fenton Hill, New Mexico. A successful 30 day flow test of the system during FY86 indicated that such a system would produce heat at at temperature and rate that could support operation of a commercial electrical power plant. However, it did not answer certain questions basic to the economics of long-term operation, including the rate of depletion of the thermal reservoir, the rate of water loss from the system, and the possibility of operating problems during extended continuous operation. Preparations for a one year flow test of the system to answer these and more fundamental questions concerning hot dry rock systems were made in FY87: design of the required surface facilities; procurement and installation of some of their components; development and testing of slim line logging tools for use through small-diameter production tubing; research on temperature-sensitive reactive chemical tracers to monitor thermal depletion of the reservoir; and computer simulations of the 30-day test, extended to modeling the planned Long-Term Flow Test Title: Hot Dry Rock Geothermal Energy Development Program: Annual Report, Fiscal Year 1987 Author: Smith, M.C. Year: 1989 During fiscal year 1987, emphasis in the Hot Dry Rock Geothermal Energy Development Program was on preparations for a " Long-Term Flow Test " of the "Phase II" or "Engineering" hot dry rock energy system at Fenton Hill, New Mexico. A successful 30 day flow test of the system during FY86 indicated that such a system would produce heat at at temperature and rate that could support operation of a commercial electrical power plant. However, it did not answer certain questions basic to the economics of long-term operation, including the rate of depletion of the thermal reservoir, the rate of water loss from the system, and the possibility of operating problems during extended continuous operation. Preparations for a one year flow test of the system to answer these and more fundamental questions concerning hot dry rock systems were made in FY87: design of the required surface facilities; procurement and installation of some of their components; development and testing of slim line logging tools for use through small-diameter production tubing; research on temperature-sensitive reactive chemical tracers to monitor thermal depletion of the reservoir; and computer simulations of the 30-day test, extended to modeling the planned Long-Term Flow Test

29. [Image] Initial Investigation of Soil Mercury Geochemistry as an Aid to Drill Site Selection in Geothermal Systems


	A mercury-in-soil survey was conducted at the Roosevelt Hot Springs Known Geothermal Resource Area (KGRA), Utah, to evaluate mercury soil geochemistry as a method of selecting exploration well sites in ...
	Citation Citation Citation Abstract Copy Title: Initial Investigation of Soil Mercury Geochemistry as an Aid to Drill Site Selection in Geothermal Systems Author: Capuano, R.M. Year: 1978 A mercury-in-soil survey was conducted at the Roosevelt Hot Springs Known Geothermal Resource Area (KGRA), Utah, to evaluate mercury soil geochemistry as a method of selecting exploration well sites in a hot-water geothermal system. Samples of -80 mesh soil were collected at 30.5 m intervals along traverses crossing known structures, surficial geothermal alteration, and exploration well sites, and were analyzed using a Gold Film Mercury Detector. Strong mercury anomalies occur at locations along known structures in close proximity to subsurface thermal activity; examples include areas over hot spring deposits and near a shallow producing well. In contrast, background mercury concentrations are present in nearby locations with little or no indication of subsurface thermal activity, such as areas around deep marginal producing wells and dry wells, and areas lacking hot spring deposits. These results indicate that mercury geochemical surveys can be useful for identifying and mapping structures controlling fluid flow in geothermal systems and for delineating areas overlying near-surface thermal activity. Soil mercury geochemistry thus provides information which may aid in the cost-effective selection of exploratory well sites Title: Initial Investigation of Soil Mercury Geochemistry as an Aid to Drill Site Selection in Geothermal Systems Author: Capuano, R.M. Year: 1978 A mercury-in-soil survey was conducted at the Roosevelt Hot Springs Known Geothermal Resource Area (KGRA), Utah, to evaluate mercury soil geochemistry as a method of selecting exploration well sites in a hot-water geothermal system. Samples of -80 mesh soil were collected at 30.5 m intervals along traverses crossing known structures, surficial geothermal alteration, and exploration well sites, and were analyzed using a Gold Film Mercury Detector. Strong mercury anomalies occur at locations along known structures in close proximity to subsurface thermal activity; examples include areas over hot spring deposits and near a shallow producing well. In contrast, background mercury concentrations are present in nearby locations with little or no indication of subsurface thermal activity, such as areas around deep marginal producing wells and dry wells, and areas lacking hot spring deposits. These results indicate that mercury geochemical surveys can be useful for identifying and mapping structures controlling fluid flow in geothermal systems and for delineating areas overlying near-surface thermal activity. Soil mercury geochemistry thus provides information which may aid in the cost-effective selection of exploratory well sites

30. [Image] Evaluation and Targeting of Geothermal Energy Resources in the Southeastern United States. Progress Report, May 1, 1976--October 31, 1976


	Progress is reported in the development of procedures for the evaluation of low-temperature radiogenically-derived geothermal resources in the eastern United States utilizing geological geochemical, and ...
	Citation Citation Citation Abstract Copy Title: Evaluation and Targeting of Geothermal Energy Resources in the Southeastern United States. Progress Report, May 1, 1976--October 31, 1976 Author: Costain, J.K. Year: 1976 Progress is reported in the development of procedures for the evaluation of low-temperature radiogenically-derived geothermal resources in the eastern United States utilizing geological geochemical, and geophysical data. An optimum site for geothermal development in the tectonically stable eastern United States will probably be associated with crustal igneous rocks containing relatively high concentrations of radiogenic heat-producing elements buried beneath an insulating blanket of sediments of low thermal conductivity. Evaluation of plutonic rocks exposed in the Piedmont will aid in the interpretation of gravity and magnetic data for the Atlantic Coastal Plain. Initial results of determination of heat generation from surface samples in South Caroline are encouraging, especially if granitic igneous rocks of similar heat generation can be found beneath sedimentary insulation. Continues logging of existing wells in Coastal Plain sediments supports earlier conclusion that these sediments do behave as efficient sedimentary insulators. Higher temperatures appear to be reached at shallower depths for wells drilled in Coastal Plain sediments in the vicinity of the Georgetown, South Carolina gravity law. Detailed structural mapping in the vicinity of the warm springs in northwestern Virginia has confirmed structural control of the warm springs, and has revealed the existence of kink bands. The kink bands could be related to the development of zones of vertical permeability which serve as conduits in sedimentary rocks for ascending hot water. Title: Evaluation and Targeting of Geothermal Energy Resources in the Southeastern United States. Progress Report, May 1, 1976--October 31, 1976 Author: Costain, J.K. Year: 1976 Progress is reported in the development of procedures for the evaluation of low-temperature radiogenically-derived geothermal resources in the eastern United States utilizing geological geochemical, and geophysical data. An optimum site for geothermal development in the tectonically stable eastern United States will probably be associated with crustal igneous rocks containing relatively high concentrations of radiogenic heat-producing elements buried beneath an insulating blanket of sediments of low thermal conductivity. Evaluation of plutonic rocks exposed in the Piedmont will aid in the interpretation of gravity and magnetic data for the Atlantic Coastal Plain. Initial results of determination of heat generation from surface samples in South Caroline are encouraging, especially if granitic igneous rocks of similar heat generation can be found beneath sedimentary insulation. Continues logging of existing wells in Coastal Plain sediments supports earlier conclusion that these sediments do behave as efficient sedimentary insulators. Higher temperatures appear to be reached at shallower depths for wells drilled in Coastal Plain sediments in the vicinity of the Georgetown, South Carolina gravity law. Detailed structural mapping in the vicinity of the warm springs in northwestern Virginia has confirmed structural control of the warm springs, and has revealed the existence of kink bands. The kink bands could be related to the development of zones of vertical permeability which serve as conduits in sedimentary rocks for ascending hot water.

Limit your search

Material Types

Subject

Author

Pivot Field

Database

Search

Search Results

1. [Image] Geothermal Environmental Impact Assessment: Subsurface Environmental Assessment for Four Geothermal Systems

2. [Image] Atlantic coastal plain geothermal test holes, New Jersey: Hole completion reports

3. [Image] Energy Research and Technology. Interim Bibliography of Reports, with Abstracts

4. [Image] Geothermal Potential in the Albuquerque Area, New Mexico

5. [Image] Investigations of the Dunes Geothermal Anomaly, Imperial Valley, California: Part 1. Geochemistry of Geothermal Fluid

6. [Image] Utilization of geothermal energy in the mining and processing of tungsten ore: 2nd quarterly report

7. [Image] Operations Research and Systems Analysis of Geopressured/Geothermal Resources in Louisiana. Final Report for Initiation Project

8. [Image] Comparative assessment of five potential sites for hydrothermal-magma systems: summary

9. [Image] Comparative assessment of five potential sites for hydrothermal-magma systems: energy transport

10. [Image] Investigation and evaluation of geopressured-geothermal wells. Fairfax Foster Sutter No. 2 well, St. Mary Parish, Louisiana. Volume I. Completion and testing. Final report

11. [Image] A Geological and Geophysical Study of the Geothermal Energy Potential of Pilgrim Springs, Alaska

12. [Image] Geothermal exploration assessment and interpretation, Upper Klamath Lake Area, Klamath Basin, Oregon

13. [Image] Geothermal direct heat project, Marlin, Texas: Environmental assessment

14. [Image] Downhole Heat Exchanger for Shallow Geothermal Systems: Performance, Economics and Applicability

15. [Image] Industry Participation in DOE-Sponsored Geopressured Geothermal Resource Development

16. [Image] Sweet Lake Geopressured-Geothermal Project, Magma Gulf-Technadril/DOE Amoco FEE Volume II: Surface Installations Reservoir Testing; Annual Report for the Period February 28, 1981-February 10, 1982

17. [Image] Environmental Monitoring for the Hot Dry Rock Geothermal Energy Development Project, Annual Report for the Period July 1975-June 1976

18. [Image] Low-Temperature Geothermal Potential of the Ojo Caliente Warm Springs Area, Northern New Mexico

19. [Image] DHE (Downhole Heat Exchangers)

20. [Image] Liquid-Fluidized-Bed Heat Exchanger Design Parameters

21. [Image] Thermal springs list for the United States; National Oceanic and Atmospheric Administration Key to Geophysical Records Documentation No. 12

22. [Image] Dipole-Dipole Resistivity Surveys, Roosevelt Hot Springs KGRA. Final Report, Volume 2

23. [Image] Geologic Interpretation of the Geothermal Potential of the North Bonneville Area

24. [Image] Packer injection test data from sites on fractured rock

25. [Image] The Cody Hydrothermal System

26. [Image] Geothermal energy enhancement by thermal fracture. [REX (Rock Energy Extraction)]

27. [Image] Dipole-Dipole Resistivity Survey of a Portion of the Coso Hot Springs KGRA, Inyo County, California

28. [Image] Hot Dry Rock Geothermal Energy Development Program: Annual Report, Fiscal Year 1987

29. [Image] Initial Investigation of Soil Mercury Geochemistry as an Aid to Drill Site Selection in Geothermal Systems

30. [Image] Evaluation and Targeting of Geothermal Energy Resources in the Southeastern United States. Progress Report, May 1, 1976--October 31, 1976