Search

Search Results

• 1. [Article] Air-quality and Climatic Consequences of Bioenergy Crop Cultivation

  Bioenergy is expected to play an increasingly significant role in the global energy budget. In addition to the use of liquid energy forms such as ethanol and biodiesel, electricity generation using processed ...

  Citation × Citation Citation Abstract Copy Title: Air-quality and Climatic Consequences of Bioenergy Crop Cultivation Author: Porter, William Christian Year: 2013 Bioenergy is expected to play an increasingly significant role in the global energy budget. In addition to the use of liquid energy forms such as ethanol and biodiesel, electricity generation using processed energy crops as a partial or full coal alternative is expected to increase, requiring large-scale conversions of land for the cultivation of bioenergy feedstocks such as cane, grasses, or short rotation coppice. With land-use change identified as a major contributor to changes in the emission of biogenic volatile organic compounds (BVOCs), many of which are known contributors to the pollutants ozone (O3) and fine particulate matter (PM2.5), careful review of crop emission profiles and local atmospheric chemistry will be necessary to mitigate any unintended air-quality consequences. In this work, the atmospheric consequences of bioenergy crop replacement are examined using both the high-resolution regional chemical transport model WRF/Chem (Weather Research and Forecasting with Chemistry) and the global climate model CESM (Community Earth System Model). Regional sensitivities to several representative crop types are analyzed, and the impacts of each crop on air quality and climate are compared. Overall, the high emitting crops (eucalyptus and giant reed) were found to produce climate and human health costs totaling up to 40% of the value of CO2 emissions prevented, while the related costs of the lowest-emitting crop (switchgrass) were negligible. Title: Air-quality and Climatic Consequences of Bioenergy Crop Cultivation Author: Porter, William Christian Year: 2013 Bioenergy is expected to play an increasingly significant role in the global energy budget. In addition to the use of liquid energy forms such as ethanol and biodiesel, electricity generation using processed energy crops as a partial or full coal alternative is expected to increase, requiring large-scale conversions of land for the cultivation of bioenergy feedstocks such as cane, grasses, or short rotation coppice. With land-use change identified as a major contributor to changes in the emission of biogenic volatile organic compounds (BVOCs), many of which are known contributors to the pollutants ozone (O3) and fine particulate matter (PM2.5), careful review of crop emission profiles and local atmospheric chemistry will be necessary to mitigate any unintended air-quality consequences. In this work, the atmospheric consequences of bioenergy crop replacement are examined using both the high-resolution regional chemical transport model WRF/Chem (Weather Research and Forecasting with Chemistry) and the global climate model CESM (Community Earth System Model). Regional sensitivities to several representative crop types are analyzed, and the impacts of each crop on air quality and climate are compared. Overall, the high emitting crops (eucalyptus and giant reed) were found to produce climate and human health costs totaling up to 40% of the value of CO2 emissions prevented, while the related costs of the lowest-emitting crop (switchgrass) were negligible. Close

• 2. [Article] A 30-Year Record of the Isotopic Composition of Atmospheric Methane

  Methane (CH4) is one of the most important greenhouse gases after water vapor and carbon dioxide due to its high concentration and global warming potential 25 times than that of CO2 (based on a 100 year ...

  Citation × Citation Citation Abstract Copy Title: A 30-Year Record of the Isotopic Composition of Atmospheric Methane Author: Teama, Doaa Galal Mohammed Year: 2013 Methane (CH4) is one of the most important greenhouse gases after water vapor and carbon dioxide due to its high concentration and global warming potential 25 times than that of CO2 (based on a 100 year time horizon). Its atmospheric concentration has more than doubled from the preindustrial era due to anthropogenic activities such as rice cultivation, biomass burning, and fossil fuel production. However, the rate of increase of atmospheric CH4 (or the growth rate) slowed from 1980 until present. The main reason for this trend is a slowdown in the trend of CH4 sources. Measuring stable isotopes of atmospheric CH4 can constrain changes of CH4 sources. The main goal of this work is to interpret the CH4 trend from 1978-2010 in terms of its sources using measurements of CH4 mixing ratio and its isotopes. The current work presents the measurements and analysis of CH4 and its isotopes (δ13C and δD) of four air archive sample sets collected by the Oregon Graduate Institute (OGI). CH4 isotope ratios (δ13C and δD) were measured by a continuous flow isotope ratio mass spectrometer technique developed at PSU. The first set is for Cape Meares, Oregon which is the oldest and longest set and spans 1977-1999. The integrity of this sample set was evaluated by comparing between our measured CH4 mixing ratio values with those measured values by OGI and was found to be stable. Resulting CH4 seasonal cycle was evaluated from the Cape Meares data. The CH4 seasonal cycle shows a broad maximum during October-April and a minimum between July and August. The seasonal cycles of δ13C and δD have maximum values in May for δ13C and in July for δD and minimum values between September-October for δ13C and in October for δD. These results indicate a CH4 source that is more enriched January-May (e.g. biomass burning) and a source that is more depleted August-October (e.g. microbial). In addition to Cape Meares, air archive sets were analyzed from: South Pole (SPO), Samoa (SMO), Mauna Loa (MLO) 1992-1996. The presented δD measurements are unique measured values during these time periods at these stations. To obtain the long-term in isotopic CH4 from 1978-2010, other datasets of Northern Hemisphere mid-latitude sites are included with Cape Meares. These sites are Olympic Peninsula, Washington; Montaña de Oro, California; and Niwot Ridge, Colorado. The seasonal cycles of CH4 and its isotopes from the composite dataset have the same phase and amplitudes as the Cape Meares site. CH4 growth rate shows a decrease over time 1978-2010 with three main spikes in 1992, 1998, and 2003 consistent with the literature from the global trend. CH4 lifetime is estimated to 9.7 yrs. The δ13C trend in the composite data shows a slow increase from 1978-1987, a more rapid rate of change 1987-2005, and a gradual depletion during 2005-2010. The δD trend in the composite data shows a gradual increase during 1978-2001 and decrease from 2001-2005. From these results, the global CH4 emissions are estimated and show a leveling off sources 1982-2010 with two large peak anomalies in 1998 and 2003. The global average δ13C and δD of CH4 sources are estimated from measured values. The results of these calculations indicate that there is more than one source which controls the decrease in the global CH4 trend. From 1982-2001, δ13C and δD of CH4 sources becomes more depleted due to a decrease in fossil and/or biomass burning sources relative to microbial sources. From 2005-2010, δ13C of CH4 sources returns to its 1981 value. There are two significant peaks in δ13C and δD of CH4 sources in 1998 and 2003 due to the wildfire emissions in boreal areas and in Europe. Title: A 30-Year Record of the Isotopic Composition of Atmospheric Methane Author: Teama, Doaa Galal Mohammed Year: 2013 Methane (CH4) is one of the most important greenhouse gases after water vapor and carbon dioxide due to its high concentration and global warming potential 25 times than that of CO2 (based on a 100 year time horizon). Its atmospheric concentration has more than doubled from the preindustrial era due to anthropogenic activities such as rice cultivation, biomass burning, and fossil fuel production. However, the rate of increase of atmospheric CH4 (or the growth rate) slowed from 1980 until present. The main reason for this trend is a slowdown in the trend of CH4 sources. Measuring stable isotopes of atmospheric CH4 can constrain changes of CH4 sources. The main goal of this work is to interpret the CH4 trend from 1978-2010 in terms of its sources using measurements of CH4 mixing ratio and its isotopes. The current work presents the measurements and analysis of CH4 and its isotopes (δ13C and δD) of four air archive sample sets collected by the Oregon Graduate Institute (OGI). CH4 isotope ratios (δ13C and δD) were measured by a continuous flow isotope ratio mass spectrometer technique developed at PSU. The first set is for Cape Meares, Oregon which is the oldest and longest set and spans 1977-1999. The integrity of this sample set was evaluated by comparing between our measured CH4 mixing ratio values with those measured values by OGI and was found to be stable. Resulting CH4 seasonal cycle was evaluated from the Cape Meares data. The CH4 seasonal cycle shows a broad maximum during October-April and a minimum between July and August. The seasonal cycles of δ13C and δD have maximum values in May for δ13C and in July for δD and minimum values between September-October for δ13C and in October for δD. These results indicate a CH4 source that is more enriched January-May (e.g. biomass burning) and a source that is more depleted August-October (e.g. microbial). In addition to Cape Meares, air archive sets were analyzed from: South Pole (SPO), Samoa (SMO), Mauna Loa (MLO) 1992-1996. The presented δD measurements are unique measured values during these time periods at these stations. To obtain the long-term in isotopic CH4 from 1978-2010, other datasets of Northern Hemisphere mid-latitude sites are included with Cape Meares. These sites are Olympic Peninsula, Washington; Montaña de Oro, California; and Niwot Ridge, Colorado. The seasonal cycles of CH4 and its isotopes from the composite dataset have the same phase and amplitudes as the Cape Meares site. CH4 growth rate shows a decrease over time 1978-2010 with three main spikes in 1992, 1998, and 2003 consistent with the literature from the global trend. CH4 lifetime is estimated to 9.7 yrs. The δ13C trend in the composite data shows a slow increase from 1978-1987, a more rapid rate of change 1987-2005, and a gradual depletion during 2005-2010. The δD trend in the composite data shows a gradual increase during 1978-2001 and decrease from 2001-2005. From these results, the global CH4 emissions are estimated and show a leveling off sources 1982-2010 with two large peak anomalies in 1998 and 2003. The global average δ13C and δD of CH4 sources are estimated from measured values. The results of these calculations indicate that there is more than one source which controls the decrease in the global CH4 trend. From 1982-2001, δ13C and δD of CH4 sources becomes more depleted due to a decrease in fossil and/or biomass burning sources relative to microbial sources. From 2005-2010, δ13C of CH4 sources returns to its 1981 value. There are two significant peaks in δ13C and δD of CH4 sources in 1998 and 2003 due to the wildfire emissions in boreal areas and in Europe. Close

• 3. [Article] Defining Conservation Priorities for Freshwater Fishes According to Taxonomic, Functional, and Phylogenetic Diversity

  To date, the predominant use of systematic conservation planning has been to evaluate and conserve areas of high terrestrial biodiversity. Although studies in freshwater ecosystems have received recent ...

  Citation × Citation Citation Abstract Copy Title: Defining Conservation Priorities for Freshwater Fishes According to Taxonomic, Functional, and Phylogenetic Diversity Author: Strecker, Angela L., Olden, Julian D., Whittier, Joanna B., Paukert, Craig Patrick Year: 2011 To date, the predominant use of systematic conservation planning has been to evaluate and conserve areas of high terrestrial biodiversity. Although studies in freshwater ecosystems have received recent attention, research has rarely considered the potential trade-offs between protecting different dimensions of biodiversity and the ecological processes that maintain diversity. We provide the first systematic prioritization for freshwaters (focusing on the highly threatened and globally distinct fish fauna of the Lower Colorado River Basin, USA) simultaneously considering scenarios of: taxonomic, functional, and phylogenetic diversity; contemporary threats to biodiversity (including interactions with nonnative species); and future climate change and human population growth. There was 75% congruence between areas of highest conservation priority for different aspects of biodiversity, suggesting that conservation efforts can concurrently achieve strong complementarity among all types of diversity. However, sizable fractions of the landscape were incongruent across conservation priorities for different diversity scenarios, underscoring the importance of considering multiple dimensions of biodiversity and highlighting catchments that contribute disproportionately to taxonomic, functional, and phylogenetic diversity in the region. Regions of projected human population growth were not concordant with conservation priorities; however, higher human population abundance will likely have indirect effects on native biodiversity by increasing demand for water. This will come in direct conflict with projected reductions in precipitation and warmer temperatures, which have substantial overlap with regions of high contemporary diversity. Native and endemic fishes in arid ecosystems are critically endangered by both current and future threats, but our results highlight the use of systematic conservation planning for the optimal allocation of limited resources that incorporates multiple and complementary conservation values describing taxonomic, functional, and phylogenetic diversity. Title: Defining Conservation Priorities for Freshwater Fishes According to Taxonomic, Functional, and Phylogenetic Diversity Author: Strecker, Angela L., Olden, Julian D., Whittier, Joanna B., Paukert, Craig Patrick Year: 2011 To date, the predominant use of systematic conservation planning has been to evaluate and conserve areas of high terrestrial biodiversity. Although studies in freshwater ecosystems have received recent attention, research has rarely considered the potential trade-offs between protecting different dimensions of biodiversity and the ecological processes that maintain diversity. We provide the first systematic prioritization for freshwaters (focusing on the highly threatened and globally distinct fish fauna of the Lower Colorado River Basin, USA) simultaneously considering scenarios of: taxonomic, functional, and phylogenetic diversity; contemporary threats to biodiversity (including interactions with nonnative species); and future climate change and human population growth. There was 75% congruence between areas of highest conservation priority for different aspects of biodiversity, suggesting that conservation efforts can concurrently achieve strong complementarity among all types of diversity. However, sizable fractions of the landscape were incongruent across conservation priorities for different diversity scenarios, underscoring the importance of considering multiple dimensions of biodiversity and highlighting catchments that contribute disproportionately to taxonomic, functional, and phylogenetic diversity in the region. Regions of projected human population growth were not concordant with conservation priorities; however, higher human population abundance will likely have indirect effects on native biodiversity by increasing demand for water. This will come in direct conflict with projected reductions in precipitation and warmer temperatures, which have substantial overlap with regions of high contemporary diversity. Native and endemic fishes in arid ecosystems are critically endangered by both current and future threats, but our results highlight the use of systematic conservation planning for the optimal allocation of limited resources that incorporates multiple and complementary conservation values describing taxonomic, functional, and phylogenetic diversity. Close

• 4. [Article] Climate Change and Shifts in Water Related Ecosystem Services in the Tualatin and Yamhill River Basins

  Water related ecosystem services (WES), such as flow regulation, drinking water supply, temperature regulation, and water recreational activities, are affected by anthropogenic climate change. Forecasting ...

  Citation × Citation Citation Abstract Copy Title: Climate Change and Shifts in Water Related Ecosystem Services in the Tualatin and Yamhill River Basins Author: Chang, Heejun, Anthony, Terrance, Ennaanay, Driss, Sharma, Manu Year: 2011 Water related ecosystem services (WES), such as flow regulation, drinking water supply, temperature regulation, and water recreational activities, are affected by anthropogenic climate change. Forecasting potential shifts in such WES is critical to identifying the form and magnitude of likely impacts. We quantified the levels and values of WES under multiple climate change scenarios in the two watersheds located in the Portland metropolitan area, Oregon, USA using the combination of a hydrologic model Better Assessment Science Integrating point and Non-point Sources - Soil and Water Assessment Tool (BASINS-SWAT) and an ecosystem evaluation model ? Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST). Using the Intergovernmental Panel on Climate Change?s AR4 climate change simulation results, we found that there is a slight relative increase in annual water yield, sediment yield, and dissolved phosphorus, but storm peak management does not change substantially by the 2050s. Spatial analysis shows that the locations of hot and cold spots remain relatively stable. It is also shown that there are high spatial and temporal uncertainties associated with climate change projections due to variations in precipitation projections toward the middle of the 21st century. The findings of our study provide useful information for water and land managers in identifying target areas for conservation to best sustain WES provision, use, and value under a range of climate change scenarios. Title: Climate Change and Shifts in Water Related Ecosystem Services in the Tualatin and Yamhill River Basins Author: Chang, Heejun, Anthony, Terrance, Ennaanay, Driss, Sharma, Manu Year: 2011 Water related ecosystem services (WES), such as flow regulation, drinking water supply, temperature regulation, and water recreational activities, are affected by anthropogenic climate change. Forecasting potential shifts in such WES is critical to identifying the form and magnitude of likely impacts. We quantified the levels and values of WES under multiple climate change scenarios in the two watersheds located in the Portland metropolitan area, Oregon, USA using the combination of a hydrologic model Better Assessment Science Integrating point and Non-point Sources - Soil and Water Assessment Tool (BASINS-SWAT) and an ecosystem evaluation model ? Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST). Using the Intergovernmental Panel on Climate Change?s AR4 climate change simulation results, we found that there is a slight relative increase in annual water yield, sediment yield, and dissolved phosphorus, but storm peak management does not change substantially by the 2050s. Spatial analysis shows that the locations of hot and cold spots remain relatively stable. It is also shown that there are high spatial and temporal uncertainties associated with climate change projections due to variations in precipitation projections toward the middle of the 21st century. The findings of our study provide useful information for water and land managers in identifying target areas for conservation to best sustain WES provision, use, and value under a range of climate change scenarios. Close

• 5. [Article] The Terroir of Pinot Noir Wine in the Willamette Valley, Oregon : A Broad Analysis of Vineyard Soils, Grape Juice and Wine Chemistry

  Terroir is determined by a combination of factors in the vineyard including the grape varietal, geology and soil, soil hydrology, physiography, and climate. Although most studies have examined regional ...

  Citation × Citation Citation Abstract Copy Title: The Terroir of Pinot Noir Wine in the Willamette Valley, Oregon : A Broad Analysis of Vineyard Soils, Grape Juice and Wine Chemistry Author: Barnard, Kathryn Nora Year: 2016 Terroir is determined by a combination of factors in the vineyard including the grape varietal, geology and soil, soil hydrology, physiography, and climate. Although most studies have examined regional differences in wine flavors and associated provenance of wine based on chemistry, few have examined the chemistry of the soil and the ability to trace that chemistry to grape juice and, finally, to the wine. This dissertation examines what soil physical and chemical differences specific to this region might influence grape juice chemistry and wine chemistry. Wine-grapes in the Willamette Valley, Oregon, are grown on three major soil parent materials: volcanic, marine sediments, and loess/volcanic. Winemakers have observed differences in the flavor of Pinot Noir wine made from grapes grown on these different parent materials. This dissertation examines differences in the soil properties and elemental chemistry of the soil parent materials at various vineyards to document their effect on wine chemistry as a step towards understanding differences in flavor. All aspects of the terroir are controlled by carefully selecting vineyards with similar exposure and elevation, the same grape varietal and wine making techniques, and only the soils vary. The hypothesis is that the chemistry of the grape juice and wine reflect the soil in which the grapes were grown and that the three parent materials have soils that can be distinguished by their physical and chemical characteristics. Soil pits were excavated in 20 vineyards, soil properties were described in the field, and soil samples were later analyzed in the laboratory particle size, organic matter, color, pH, cation exchange capacity (ammonium acetate method), clay mineralogy (x-ray diffraction), and elemental chemistry (ICP-MS/AES). X-ray fluorescence was used to examine the pisolites. ICP-MS/AES was used for elemental analysis of grape juice and wines produced from these vineyards. Principal component analysis was used to compare soil physical and chemical characteristics, grape juice and wine chemistry. The physical characteristics of soils from all the three parent materials indicate: they are old (>50,000 years) based on their high clay content, low cation exchange capacity, red colors, and high Fe and Al content. These features indicate enough time has passed to reduce organic matter and other cations at depth, leave behind insoluble Fe and Al, and develop pedogenic clays. In my study region, volcanic and marine sediment soils are more developed with slightly lower acidity than the loess/volcanic soils. A new finding for this region is the presence of pisolites (Fe/Mg concretions) in the volcanic and the loess/volcanic soils, but absent in the marine sediment soils. Winemakers hypothesized that pisolites were present only in loess soils and influenced wine flavor in some way. Volcanic soils have the highest P, S, Fe, Co, Mn, and V concentrations and the lowest As and Sr values. Marine sediment soils have higher Cl and Sr and lower P, Co, Mn, Ba, and V concentrations than volcanic soils. Loess soils have the highest values of K and Mg and are similar to volcanic soils with higher P and V values and similar to marine sediment soils with higher Sr values. The main elements found to be significant in determining one parent material from another are V and Mn (volcanic soils), Mg and K (loess soils), and Sr (marine sediment or loess soils). Sr is slightly higher in grape juice and wine from vines grown on marine sediment parent material compared to volcanic and loess parent material, whereas Mn is higher in the juice and wine from grapes grown in volcanic parent material. P, S, Fe, Co, V, Cl, Ba, Mg, and K did not maintain their relative concentration levels from soil to grape juice to wine. The principal component analysis shows that soil and wine chemistry differs between parent material, but is inconclusive for grape juice chemistry. Title: The Terroir of Pinot Noir Wine in the Willamette Valley, Oregon : A Broad Analysis of Vineyard Soils, Grape Juice and Wine Chemistry Author: Barnard, Kathryn Nora Year: 2016 Terroir is determined by a combination of factors in the vineyard including the grape varietal, geology and soil, soil hydrology, physiography, and climate. Although most studies have examined regional differences in wine flavors and associated provenance of wine based on chemistry, few have examined the chemistry of the soil and the ability to trace that chemistry to grape juice and, finally, to the wine. This dissertation examines what soil physical and chemical differences specific to this region might influence grape juice chemistry and wine chemistry. Wine-grapes in the Willamette Valley, Oregon, are grown on three major soil parent materials: volcanic, marine sediments, and loess/volcanic. Winemakers have observed differences in the flavor of Pinot Noir wine made from grapes grown on these different parent materials. This dissertation examines differences in the soil properties and elemental chemistry of the soil parent materials at various vineyards to document their effect on wine chemistry as a step towards understanding differences in flavor. All aspects of the terroir are controlled by carefully selecting vineyards with similar exposure and elevation, the same grape varietal and wine making techniques, and only the soils vary. The hypothesis is that the chemistry of the grape juice and wine reflect the soil in which the grapes were grown and that the three parent materials have soils that can be distinguished by their physical and chemical characteristics. Soil pits were excavated in 20 vineyards, soil properties were described in the field, and soil samples were later analyzed in the laboratory particle size, organic matter, color, pH, cation exchange capacity (ammonium acetate method), clay mineralogy (x-ray diffraction), and elemental chemistry (ICP-MS/AES). X-ray fluorescence was used to examine the pisolites. ICP-MS/AES was used for elemental analysis of grape juice and wines produced from these vineyards. Principal component analysis was used to compare soil physical and chemical characteristics, grape juice and wine chemistry. The physical characteristics of soils from all the three parent materials indicate: they are old (>50,000 years) based on their high clay content, low cation exchange capacity, red colors, and high Fe and Al content. These features indicate enough time has passed to reduce organic matter and other cations at depth, leave behind insoluble Fe and Al, and develop pedogenic clays. In my study region, volcanic and marine sediment soils are more developed with slightly lower acidity than the loess/volcanic soils. A new finding for this region is the presence of pisolites (Fe/Mg concretions) in the volcanic and the loess/volcanic soils, but absent in the marine sediment soils. Winemakers hypothesized that pisolites were present only in loess soils and influenced wine flavor in some way. Volcanic soils have the highest P, S, Fe, Co, Mn, and V concentrations and the lowest As and Sr values. Marine sediment soils have higher Cl and Sr and lower P, Co, Mn, Ba, and V concentrations than volcanic soils. Loess soils have the highest values of K and Mg and are similar to volcanic soils with higher P and V values and similar to marine sediment soils with higher Sr values. The main elements found to be significant in determining one parent material from another are V and Mn (volcanic soils), Mg and K (loess soils), and Sr (marine sediment or loess soils). Sr is slightly higher in grape juice and wine from vines grown on marine sediment parent material compared to volcanic and loess parent material, whereas Mn is higher in the juice and wine from grapes grown in volcanic parent material. P, S, Fe, Co, V, Cl, Ba, Mg, and K did not maintain their relative concentration levels from soil to grape juice to wine. The principal component analysis shows that soil and wine chemistry differs between parent material, but is inconclusive for grape juice chemistry. Close

• 6. [Article] Turbidity Dynamics during High-Flow Storm Events in the Clackamas River, Oregon 2006-2012

  Turbidity is a useful parameter that can be utilized to help understand the water quality in a river and is an expression of the optical properties of a liquid that cause light rays to be scattered and ...

  Citation × Citation Citation Abstract Copy Title: Turbidity Dynamics during High-Flow Storm Events in the Clackamas River, Oregon 2006-2012 Author: Doyle, Micelis Clyde Year: 2017 Turbidity is a useful parameter that can be utilized to help understand the water quality in a river and is an expression of the optical properties of a liquid that cause light rays to be scattered and absorbed rather than transmitted in straight lines. A total of 41 storm events occurring during water years 2006-2012 were analyzed for this study. A hysteresis index (HI) was used to assess the difference in turbidity on the rising and falling limbs of a storm-hydrograph. The upstream Carter Bridge site exhibited a clockwise (C) hysteresis in 38 of 41 storm events and counter-clockwise (CC) hysteresis in three storm events. The downstream Oregon City site exhibited clockwise hysteresis in 29 of 41 storm events and counter-clockwise hysteresis in 12 storm events. Paired t-test comparisons of calculated HI measured during storm events showed that the upstream forested site Carter Bridge had a statistically significant higher HI than the downstream Oregon City site, suggesting that particles that contribute to increasing turbidity and suspended sediment at the upstream site are delivered to the river earlier in the storm event in comparison to the downstream Oregon City site. In contrast particulate matter and suspended sediment was more likely to be higher on the receding limb of the storm hydrograph at the downstream site in comparison to the upstream monitoring location. Multiple linear regression analysis determined the major hydrological and meteorological controls influencing turbidity over the period of a storm event. The log value of the change (Log ΔQ) in discharge explained 81% of the log value of change in turbidity (Log ΔTb) at Carter Bridge and 48% of the change in turbidity at Oregon City for all storms. Log ΔQ explained 85% and 50% variations of Log ΔTb at Carter Bridge and at Oregon City, respectively in the wet season. Log ΔQ explained 82% of Log ΔTb at Carter Bridge during the Dry Season and together with 3-day antecedent precipitation, Log ΔQ explained 84% of variation in Log ΔTb at Oregon City during the Dry Season. The findings of this study, which offers information about the dynamics that lead to increased turbidity events, could be helpful to researchers, regulatory agencies and water resource managers in maintaining high water quality in rivers. Title: Turbidity Dynamics during High-Flow Storm Events in the Clackamas River, Oregon 2006-2012 Author: Doyle, Micelis Clyde Year: 2017 Turbidity is a useful parameter that can be utilized to help understand the water quality in a river and is an expression of the optical properties of a liquid that cause light rays to be scattered and absorbed rather than transmitted in straight lines. A total of 41 storm events occurring during water years 2006-2012 were analyzed for this study. A hysteresis index (HI) was used to assess the difference in turbidity on the rising and falling limbs of a storm-hydrograph. The upstream Carter Bridge site exhibited a clockwise (C) hysteresis in 38 of 41 storm events and counter-clockwise (CC) hysteresis in three storm events. The downstream Oregon City site exhibited clockwise hysteresis in 29 of 41 storm events and counter-clockwise hysteresis in 12 storm events. Paired t-test comparisons of calculated HI measured during storm events showed that the upstream forested site Carter Bridge had a statistically significant higher HI than the downstream Oregon City site, suggesting that particles that contribute to increasing turbidity and suspended sediment at the upstream site are delivered to the river earlier in the storm event in comparison to the downstream Oregon City site. In contrast particulate matter and suspended sediment was more likely to be higher on the receding limb of the storm hydrograph at the downstream site in comparison to the upstream monitoring location. Multiple linear regression analysis determined the major hydrological and meteorological controls influencing turbidity over the period of a storm event. The log value of the change (Log ΔQ) in discharge explained 81% of the log value of change in turbidity (Log ΔTb) at Carter Bridge and 48% of the change in turbidity at Oregon City for all storms. Log ΔQ explained 85% and 50% variations of Log ΔTb at Carter Bridge and at Oregon City, respectively in the wet season. Log ΔQ explained 82% of Log ΔTb at Carter Bridge during the Dry Season and together with 3-day antecedent precipitation, Log ΔQ explained 84% of variation in Log ΔTb at Oregon City during the Dry Season. The findings of this study, which offers information about the dynamics that lead to increased turbidity events, could be helpful to researchers, regulatory agencies and water resource managers in maintaining high water quality in rivers. Close

• 7. [Article] Modeling of Ultrafine Particle Emissions and Ambient Levels for the Near Roadside Environment

  Various epidemiological studies have linked exposure to Ultrafine Particles (UFP; diameter< 100 nm) to adverse health impacts. Roadway traffic is one of the major sources of UFPs and heavily influences ...

  Citation × Citation Citation Abstract Copy Title: Modeling of Ultrafine Particle Emissions and Ambient Levels for the Near Roadside Environment Author: Ahmed, Sauda Year: 2017 Various epidemiological studies have linked exposure to Ultrafine Particles (UFP; diameter< 100 nm) to adverse health impacts. Roadway traffic is one of the major sources of UFPs and heavily influences UFP concentrations in the nearby vicinity of major roadways. Modeling efforts to predict UFPs have been limited due to the scarcity of reliable information on emissions, lack of monitoring data and limited understanding of complex processes affecting UFP concentrations near sources. In this study continuous measurement of ultrafine particle number concentrations (PNC) and mass concentrations of nitric oxide (NO), nitrogen dioxide (NO2) and PM2.5 was conducted near an arterial road and freeway at different seasons and meteorological conditions and integrated with traffic count data. PNC showed high correlation with NO (r=0.64 for arterial; 0.61 for freeway), NO2 (r=0.57 for arterial; 0.53 for freeway) and NOx (NOx=NO+NO2; r=0.63 for arterial; 0.59 for freeway) and moderate to low correlation with traffic volume (r=0.33 for arterial; 0.32 for freeway) and PM2.5 (r=0.28 for arterial; 0.23 for freeway); respectively; for both sites at 15 minute averages. The PNC-NOx relationship prevailed on a shorter term (15 min), hourly, and throughout the day basis. Both PNC and NOx showed comparatively higher correlation with traffic during the morning period but became lower during evening which can be attributed to the higher boundary layer and wind speeds. The variable meteorology in the evening affects both PNC and NOx concentrations in the same way and the correlation between NOx and PNC is maintained high both during morning (r=0.74 for arterial; 0.69 for freeway), and evening (r=0.62 for arterial; 0.59 for freeway) periods. Thus nitrogen oxides can be used as a proxy for traffic-related UFP number concentration reflecting the effect of both traffic intensity and meteorological dilution. The PNC-NOx relation was explored for various meteorological parameters i.e. wind speed and temperature. It is found that NOx emission is temperature independent and can be used to reflect the effect of traffic intensity and meteorological dilution. Once the effect of traffic intensity and dilution is removed, the effect of temperature on PNC-NOx ratio becomes important which can be attributed to the variation in PNC emission factors with temperature. The high morning PNC-NOx ratio found at the arterial road is a result of new particle formation due to lower temperature and low concentration of exhaust gases in the morning air favoring nucleation over condensation. This finding has important implication when calculating emission factors for UFP number concentrations. Thus it can be concluded that roadside concentration of ultrafine particles not only depends on traffic intensity but also on meteorological parameters affecting dilution or new particle formation. High concentrations of ultrafine particle number concentration close to a roadway is expected due to higher traffic intensity , as well as during low wind speed causing low dilution and low temperature conditions favoring new particle formation. Finally a simplified approach of calculating particle number emission factor was developed using existing and easily available emission inventory for traffic related tracer gases. Using NOx emission factors from MOVES emission model, the emission ratio of PNC to NOx was converted to develop particle number emission factors. NOx was selected as the traffic related tracer gas since the number concentration of particles is closely correlated to NOx, NOx and particles are diluted in the same way and NOx emission factors are available for a variety of traffic situations. To ensure contribution of fresh traffic exhaust, the average of the difference of pollutant concentrations at high traffic condition and background condition was used to calculate PNC-NOX ratio. Using nitrogen oxides to define background and high-traffic conditions and MOVES emission factor for NOX to convert corresponding PNC-NOX ratio, an average emission factor of (1.82 ± 0.17) E+ 14 particle/ vehicle-km was obtained, suitable for summertime. When compared to existing particle number emission factors derived from dynamometer tests, it was found that there exits reasonable agreement between the calculated real world particle number emission factors and emission factors from dynamometer tests. The calculated emission factor and R-Line dispersion model was tested in predicting near-road particle number concentrations. Although only 23% of the variability in PNC was explained by the dispersion model, 84.33% of the measurements fell within the factor of two envelope. This suggests that there is potential to effectively use these models and thus warrants more in-depth analysis. Finally, a simple map of PNC gradients from major roads of Portland was developed. The results of this study helped identify proxy-indicators to provide reference values for estimating UFP concentrations and emissions that can be used for simple evaluation of particle concentration near major roadways for environmental and urban planning purposes and to assess expected impact of UFP pollution on population living near roadways exposed to elevated concentrations. Title: Modeling of Ultrafine Particle Emissions and Ambient Levels for the Near Roadside Environment Author: Ahmed, Sauda Year: 2017 Various epidemiological studies have linked exposure to Ultrafine Particles (UFP; diameter< 100 nm) to adverse health impacts. Roadway traffic is one of the major sources of UFPs and heavily influences UFP concentrations in the nearby vicinity of major roadways. Modeling efforts to predict UFPs have been limited due to the scarcity of reliable information on emissions, lack of monitoring data and limited understanding of complex processes affecting UFP concentrations near sources. In this study continuous measurement of ultrafine particle number concentrations (PNC) and mass concentrations of nitric oxide (NO), nitrogen dioxide (NO2) and PM2.5 was conducted near an arterial road and freeway at different seasons and meteorological conditions and integrated with traffic count data. PNC showed high correlation with NO (r=0.64 for arterial; 0.61 for freeway), NO2 (r=0.57 for arterial; 0.53 for freeway) and NOx (NOx=NO+NO2; r=0.63 for arterial; 0.59 for freeway) and moderate to low correlation with traffic volume (r=0.33 for arterial; 0.32 for freeway) and PM2.5 (r=0.28 for arterial; 0.23 for freeway); respectively; for both sites at 15 minute averages. The PNC-NOx relationship prevailed on a shorter term (15 min), hourly, and throughout the day basis. Both PNC and NOx showed comparatively higher correlation with traffic during the morning period but became lower during evening which can be attributed to the higher boundary layer and wind speeds. The variable meteorology in the evening affects both PNC and NOx concentrations in the same way and the correlation between NOx and PNC is maintained high both during morning (r=0.74 for arterial; 0.69 for freeway), and evening (r=0.62 for arterial; 0.59 for freeway) periods. Thus nitrogen oxides can be used as a proxy for traffic-related UFP number concentration reflecting the effect of both traffic intensity and meteorological dilution. The PNC-NOx relation was explored for various meteorological parameters i.e. wind speed and temperature. It is found that NOx emission is temperature independent and can be used to reflect the effect of traffic intensity and meteorological dilution. Once the effect of traffic intensity and dilution is removed, the effect of temperature on PNC-NOx ratio becomes important which can be attributed to the variation in PNC emission factors with temperature. The high morning PNC-NOx ratio found at the arterial road is a result of new particle formation due to lower temperature and low concentration of exhaust gases in the morning air favoring nucleation over condensation. This finding has important implication when calculating emission factors for UFP number concentrations. Thus it can be concluded that roadside concentration of ultrafine particles not only depends on traffic intensity but also on meteorological parameters affecting dilution or new particle formation. High concentrations of ultrafine particle number concentration close to a roadway is expected due to higher traffic intensity , as well as during low wind speed causing low dilution and low temperature conditions favoring new particle formation. Finally a simplified approach of calculating particle number emission factor was developed using existing and easily available emission inventory for traffic related tracer gases. Using NOx emission factors from MOVES emission model, the emission ratio of PNC to NOx was converted to develop particle number emission factors. NOx was selected as the traffic related tracer gas since the number concentration of particles is closely correlated to NOx, NOx and particles are diluted in the same way and NOx emission factors are available for a variety of traffic situations. To ensure contribution of fresh traffic exhaust, the average of the difference of pollutant concentrations at high traffic condition and background condition was used to calculate PNC-NOX ratio. Using nitrogen oxides to define background and high-traffic conditions and MOVES emission factor for NOX to convert corresponding PNC-NOX ratio, an average emission factor of (1.82 ± 0.17) E+ 14 particle/ vehicle-km was obtained, suitable for summertime. When compared to existing particle number emission factors derived from dynamometer tests, it was found that there exits reasonable agreement between the calculated real world particle number emission factors and emission factors from dynamometer tests. The calculated emission factor and R-Line dispersion model was tested in predicting near-road particle number concentrations. Although only 23% of the variability in PNC was explained by the dispersion model, 84.33% of the measurements fell within the factor of two envelope. This suggests that there is potential to effectively use these models and thus warrants more in-depth analysis. Finally, a simple map of PNC gradients from major roads of Portland was developed. The results of this study helped identify proxy-indicators to provide reference values for estimating UFP concentrations and emissions that can be used for simple evaluation of particle concentration near major roadways for environmental and urban planning purposes and to assess expected impact of UFP pollution on population living near roadways exposed to elevated concentrations. Close

• 8. [Article] Hydrogeochemical Characterization of the Alvord Valley Known Geothermal Resources Area, Harney County, Oregon

  The Alvord Valley Known Geothermal Resources Area (KGRA) , located east of the Steens Mountain-Pueblo Mountains fault block in southeastern Oregon, is within the northern Basin and Range province. This ...

  Citation × Citation Citation Abstract Copy Title: Hydrogeochemical Characterization of the Alvord Valley Known Geothermal Resources Area, Harney County, Oregon Author: St. John, Anna Maria Year: 1993 The Alvord Valley Known Geothermal Resources Area (KGRA) , located east of the Steens Mountain-Pueblo Mountains fault block in southeastern Oregon, is within the northern Basin and Range province. This investigation focuses on three thermal areas in the Alvord Basin: Borax Lake and the hot springs north of Borax Lake, Alvord Hot Springs and Mickey Springs. Mickey Springs and the springs north of Borax Lake are boiling at the surface (94 and 95° C, respectively). Inflow temperatures to Borax Lake, measured at a depth of 30 m, are greater than 100° C. Surface temperatures for Alvord Hot Springs and a flowing well northeast of Borax Lake are 78 and 59° C, respectively. Thermal fluids issue from Quaternary lacustrine and alluvial deposits. While silica sinter deposits are present at all three thermal areas, sinter is not presently being deposited. Minor calcite is being deposited at the springs north of Borax Lake. The springs discharge from N to NEstriking, high-angle, basin-bounding faults along the base of Steens Mountain and Mickey Mountain and NE-striking intrabasinal faults south of Alvord Lake. The thermal waters are dilute sodium-bicarbonate waters with significant amounts of sulfate and chloride. Conservative element plots (B, F, and Li vs. Cl) indicate good correlation between Cl and the other conservative elements. These correlations could result from mixing of thermal water with a dilute cold water or fluid evolution due to increased fluid-rock interaction, evaporation, and steam loss due to boiling. The small variations in chloride concentrations of thermal fluids during the sampling period argues against mixing of thermal fluids with cold water. The geothermal system is a hot-water rather than a vapordominated system. The ỎD content of thermal fluids is similar to the ỎD content of local cold water wells, springs, basinal pore fluids at a depth of 4 to 5 m, and perennial streams. Similarities in ỎD values indicate recharge for geothermal fluids is precipitation from the Steens Mountain fault block. The Ỏ18 content of thermal fluids is shifted 2 to 3°/oo to the right of the world meteoric water line indicating fluid-rock interaction at elevated temperatures in the reservoir. Tritium contents indicate relatively long residence times and/or low-velocity circulation of meteoric water through basement rocks. Values range from 0 to 0.25 T.U. The application of two end-member models, which calculate fluid residence times, generate a minimum of 57 years and a maximum of greater than 10,000 years. Estimated reservoir temperatures based on cation and silica geothermometry are between 170 and 200°C. Oxygensulfate isotope geothermometer estimates indicate reservoir temperatures between 198 and 207' C for Borax Lake and Alvord Hot Springs. Mickey Springs and a flowing well northeast of Borax Lake yield temperature estimates of 168 and 150° C, respectively. These values indicate partial reequilibration of the isotopic system. The Ỏ13C contents of carbon dioxide and methane of gas discharges from the thermal areas are similar to geothermal fluids from other sites. The Ỏ13C of methane indicate "normal" geothermal methane for Alvord Hot Springs and Mickey Springs (-27.8 and -27.6, respectively). The Ỏ13C of CH4 for springs north of Borax Lake (-33.6) indicates a small amount of thermogenic methane may be contributed by thermal alteration of organics in basinal sediments. The Ỏ13C contents for C02 at Alvord Hot Springs and Borax Lake are within the range expected for atmospheric, fumarolic, or mantle derived C02 (-6.5 and -6.6, respectively). The Ỏ13C content of C02 from Mickey Springs is isotopically lighter than gas released from fumaroles or the mantle (-9.4). N2/Ar ratios for Mickey Springs and Borax Lake gases (39.2 and 40.8, respectively) indicate interaction with airsaturated ground water during flow through the the zone of aeration. Helium is enriched relative to Ar and N2 in gas discharges from Alvord Hot Springs, indicating longer fluid residence times and/or increased crustal interaction at high temperatures. Ratios of B/Cl indicate the fluid reservoir is hosted in volcanic rocks. The Li/Cs ratios for the Borax Lake thermal area are consistent with a reservoir located in rhyoli tic rocks. The 228Ra/226Ra content of Borax Lake thermal fluids (1.14 ± 0.13 dpm/kg) indicates interaction with volcanic rocks for Borax Lake. The 228Ra/226Ra content of thermal fluids from Alvord Hot Springs and Mickey Springs (0.38~0.02 and 0.17 ~ 0.09) are lower than those expected for volcanic rocks and may indicate local uranium accumulation in the reservoir or zones of upflow. The 87Sr / 86Sr values for thermal waters and stratigraphic uni ts indicate the fluid reservoir is located in volcanic rocks beneath Steens Basalt. Equilibration of fluids in these units argues for thermal water circulation depths of 2 to 2.5 km in the Borax Lake thermal area, greater than 3 km in the Alvord Hot Springs area and 1 to 2 km in the Mickey Springs area. Data presented in this study do not preclude a single large deep reservoir system discharging at these three thermal areas in the Alvord basin. Differences in the chemical and isotopic composition of discharge from the three thermal areas are produced during upf low from the reservoir. During upflow, thermal waters follow a complex pathway of vertical and lateral fractures which includes short residence times in shallow reservoirs before reaching the surface. Boiling, mixing with condensate, oxidation, mixing with 1-3% tritium-bearing, near-surface cold water, relative differences in flow rate and volume, and slow cooling without vigorous boiling are processes that modify fluid composition during upflow from the deep geothermal reservoir. Title: Hydrogeochemical Characterization of the Alvord Valley Known Geothermal Resources Area, Harney County, Oregon Author: St. John, Anna Maria Year: 1993 The Alvord Valley Known Geothermal Resources Area (KGRA) , located east of the Steens Mountain-Pueblo Mountains fault block in southeastern Oregon, is within the northern Basin and Range province. This investigation focuses on three thermal areas in the Alvord Basin: Borax Lake and the hot springs north of Borax Lake, Alvord Hot Springs and Mickey Springs. Mickey Springs and the springs north of Borax Lake are boiling at the surface (94 and 95° C, respectively). Inflow temperatures to Borax Lake, measured at a depth of 30 m, are greater than 100° C. Surface temperatures for Alvord Hot Springs and a flowing well northeast of Borax Lake are 78 and 59° C, respectively. Thermal fluids issue from Quaternary lacustrine and alluvial deposits. While silica sinter deposits are present at all three thermal areas, sinter is not presently being deposited. Minor calcite is being deposited at the springs north of Borax Lake. The springs discharge from N to NEstriking, high-angle, basin-bounding faults along the base of Steens Mountain and Mickey Mountain and NE-striking intrabasinal faults south of Alvord Lake. The thermal waters are dilute sodium-bicarbonate waters with significant amounts of sulfate and chloride. Conservative element plots (B, F, and Li vs. Cl) indicate good correlation between Cl and the other conservative elements. These correlations could result from mixing of thermal water with a dilute cold water or fluid evolution due to increased fluid-rock interaction, evaporation, and steam loss due to boiling. The small variations in chloride concentrations of thermal fluids during the sampling period argues against mixing of thermal fluids with cold water. The geothermal system is a hot-water rather than a vapordominated system. The ỎD content of thermal fluids is similar to the ỎD content of local cold water wells, springs, basinal pore fluids at a depth of 4 to 5 m, and perennial streams. Similarities in ỎD values indicate recharge for geothermal fluids is precipitation from the Steens Mountain fault block. The Ỏ18 content of thermal fluids is shifted 2 to 3°/oo to the right of the world meteoric water line indicating fluid-rock interaction at elevated temperatures in the reservoir. Tritium contents indicate relatively long residence times and/or low-velocity circulation of meteoric water through basement rocks. Values range from 0 to 0.25 T.U. The application of two end-member models, which calculate fluid residence times, generate a minimum of 57 years and a maximum of greater than 10,000 years. Estimated reservoir temperatures based on cation and silica geothermometry are between 170 and 200°C. Oxygensulfate isotope geothermometer estimates indicate reservoir temperatures between 198 and 207' C for Borax Lake and Alvord Hot Springs. Mickey Springs and a flowing well northeast of Borax Lake yield temperature estimates of 168 and 150° C, respectively. These values indicate partial reequilibration of the isotopic system. The Ỏ13C contents of carbon dioxide and methane of gas discharges from the thermal areas are similar to geothermal fluids from other sites. The Ỏ13C of methane indicate "normal" geothermal methane for Alvord Hot Springs and Mickey Springs (-27.8 and -27.6, respectively). The Ỏ13C of CH4 for springs north of Borax Lake (-33.6) indicates a small amount of thermogenic methane may be contributed by thermal alteration of organics in basinal sediments. The Ỏ13C contents for C02 at Alvord Hot Springs and Borax Lake are within the range expected for atmospheric, fumarolic, or mantle derived C02 (-6.5 and -6.6, respectively). The Ỏ13C content of C02 from Mickey Springs is isotopically lighter than gas released from fumaroles or the mantle (-9.4). N2/Ar ratios for Mickey Springs and Borax Lake gases (39.2 and 40.8, respectively) indicate interaction with airsaturated ground water during flow through the the zone of aeration. Helium is enriched relative to Ar and N2 in gas discharges from Alvord Hot Springs, indicating longer fluid residence times and/or increased crustal interaction at high temperatures. Ratios of B/Cl indicate the fluid reservoir is hosted in volcanic rocks. The Li/Cs ratios for the Borax Lake thermal area are consistent with a reservoir located in rhyoli tic rocks. The 228Ra/226Ra content of Borax Lake thermal fluids (1.14 ± 0.13 dpm/kg) indicates interaction with volcanic rocks for Borax Lake. The 228Ra/226Ra content of thermal fluids from Alvord Hot Springs and Mickey Springs (0.38~0.02 and 0.17 ~ 0.09) are lower than those expected for volcanic rocks and may indicate local uranium accumulation in the reservoir or zones of upflow. The 87Sr / 86Sr values for thermal waters and stratigraphic uni ts indicate the fluid reservoir is located in volcanic rocks beneath Steens Basalt. Equilibration of fluids in these units argues for thermal water circulation depths of 2 to 2.5 km in the Borax Lake thermal area, greater than 3 km in the Alvord Hot Springs area and 1 to 2 km in the Mickey Springs area. Data presented in this study do not preclude a single large deep reservoir system discharging at these three thermal areas in the Alvord basin. Differences in the chemical and isotopic composition of discharge from the three thermal areas are produced during upf low from the reservoir. During upflow, thermal waters follow a complex pathway of vertical and lateral fractures which includes short residence times in shallow reservoirs before reaching the surface. Boiling, mixing with condensate, oxidation, mixing with 1-3% tritium-bearing, near-surface cold water, relative differences in flow rate and volume, and slow cooling without vigorous boiling are processes that modify fluid composition during upflow from the deep geothermal reservoir. Close

• 9. [Article] Invertebrate Community Composition Across Inundation Regimes and Its Potential to Reduce Plant Stress

  Appreciation of the ecological and economic values associated with healthy salt marshes has led to a recent rise in the number of marshes that are being targeted for restoration by dike removal. The success ...

  Citation × Citation Citation Abstract Copy Title: Invertebrate Community Composition Across Inundation Regimes and Its Potential to Reduce Plant Stress Author: Lawson, Inez Ilicia Year: 2017 Appreciation of the ecological and economic values associated with healthy salt marshes has led to a recent rise in the number of marshes that are being targeted for restoration by dike removal. The success of restoration is often measured by the return of marsh plants, though this overlooks a key component of salt marshes, that of the invertebrate community within marsh sediments. To evaluate the short-term recovery of these invertebrates, sediment cores were collected across an elevational gradient in a recent dike removal marsh, one and two years post removal, and a nearby reference marsh. Abundance, richness and diversity as well as morphospecies community composition were compared across treatment groups (Reference, Removal) and elevation zone (High Marsh, Low Marsh). Morphospecies richness, abundance and diversity were significantly higher in Low Marsh samples than in High Marsh samples, though no statistically significant differences were found across treatments of the same elevation (e.g., Reference Low Marsh versus Removal Low Marsh). Pair-wise ANOSIM results found significant differences between community compositions across treatments, specifically Reference Low Marsh and Removal Low Marsh. The marsh edge, the lowest point of vascular plant growth before transitioning to tide flats, is considered a high stress environment for emergent vegetation. Plant establishment and survival in this low elevation zone is limited by the tolerance to inundation duration and frequency and anoxic sediments. Bioturbation and burrowing by macroinvertebrates increases the surface area exposed to surface water for gas exchange, increasing the depth of the redox potential discontinuity layer. Crabs that make stable, maintained burrows have been shown to increase oxygen penetration into sediment, improving plant productivity. Such crabs are not found in salt marshes of the Pacific Northwest of North America. However, other burrowing invertebrates may have a positive impact on plant health in these areas by reducing abiotic stress due to anoxic sediments, thereby allowing plants to establish and survive lower in the intertidal zone. To assess this potential relationship, study plots of Distichlis spicata were selected at equivalent elevations at the lowest point of plant establishment at the marsh edge. Focal plant rhizomes were severed from upland ramets and assigned an invertebrate abundance treatment based on a visual burrow count surrounding each plant (9 cm diameter). Focal plants were visited monthly from July to September 2016, plant health variables of chlorophyll content and chlorophyll fluorescence (photosynthetic efficiency), and sediment ORP readings were collected. Plant survivorship was significantly higher in plots with invertebrates, 96% of plants in "With Invertebrate" plots and 50% of plants in "No Invertebrates" plots survived the duration of the study. Plant health (chlorophyll content and chlorophyll fluorescence) generally increased with increased invertebrate presence though, not statistically significant. There may be potential for improved plant productivity and resilience to plants at the marsh edge due to invertebrate burrowing activity. This benefit could help mitigate projected losses in plant productivity due to sea level rise, though more research is needed to investigate the mechanism by which these invertebrates confer a health benefit to plants at the marsh edge. Title: Invertebrate Community Composition Across Inundation Regimes and Its Potential to Reduce Plant Stress Author: Lawson, Inez Ilicia Year: 2017 Appreciation of the ecological and economic values associated with healthy salt marshes has led to a recent rise in the number of marshes that are being targeted for restoration by dike removal. The success of restoration is often measured by the return of marsh plants, though this overlooks a key component of salt marshes, that of the invertebrate community within marsh sediments. To evaluate the short-term recovery of these invertebrates, sediment cores were collected across an elevational gradient in a recent dike removal marsh, one and two years post removal, and a nearby reference marsh. Abundance, richness and diversity as well as morphospecies community composition were compared across treatment groups (Reference, Removal) and elevation zone (High Marsh, Low Marsh). Morphospecies richness, abundance and diversity were significantly higher in Low Marsh samples than in High Marsh samples, though no statistically significant differences were found across treatments of the same elevation (e.g., Reference Low Marsh versus Removal Low Marsh). Pair-wise ANOSIM results found significant differences between community compositions across treatments, specifically Reference Low Marsh and Removal Low Marsh. The marsh edge, the lowest point of vascular plant growth before transitioning to tide flats, is considered a high stress environment for emergent vegetation. Plant establishment and survival in this low elevation zone is limited by the tolerance to inundation duration and frequency and anoxic sediments. Bioturbation and burrowing by macroinvertebrates increases the surface area exposed to surface water for gas exchange, increasing the depth of the redox potential discontinuity layer. Crabs that make stable, maintained burrows have been shown to increase oxygen penetration into sediment, improving plant productivity. Such crabs are not found in salt marshes of the Pacific Northwest of North America. However, other burrowing invertebrates may have a positive impact on plant health in these areas by reducing abiotic stress due to anoxic sediments, thereby allowing plants to establish and survive lower in the intertidal zone. To assess this potential relationship, study plots of Distichlis spicata were selected at equivalent elevations at the lowest point of plant establishment at the marsh edge. Focal plant rhizomes were severed from upland ramets and assigned an invertebrate abundance treatment based on a visual burrow count surrounding each plant (9 cm diameter). Focal plants were visited monthly from July to September 2016, plant health variables of chlorophyll content and chlorophyll fluorescence (photosynthetic efficiency), and sediment ORP readings were collected. Plant survivorship was significantly higher in plots with invertebrates, 96% of plants in "With Invertebrate" plots and 50% of plants in "No Invertebrates" plots survived the duration of the study. Plant health (chlorophyll content and chlorophyll fluorescence) generally increased with increased invertebrate presence though, not statistically significant. There may be potential for improved plant productivity and resilience to plants at the marsh edge due to invertebrate burrowing activity. This benefit could help mitigate projected losses in plant productivity due to sea level rise, though more research is needed to investigate the mechanism by which these invertebrates confer a health benefit to plants at the marsh edge. Close

• 10. [Article] Investigating the Potential of Land Use Modifications to Mitigate the Respiratory Health Impacts of NO2: A Case Study in the Portland-Vancouver Metropolitan Area

  The health impacts of urban air pollution are a growing concern in our rapidly urbanizing world. Urban air pollutants show high intra-urban spatial variability linked to urban land use and land cover (LULC). ...

  Citation × Citation Citation Abstract Copy Title: Investigating the Potential of Land Use Modifications to Mitigate the Respiratory Health Impacts of NO2: A Case Study in the Portland-Vancouver Metropolitan Area Author: Rao, Meenakshi Year: 2016 The health impacts of urban air pollution are a growing concern in our rapidly urbanizing world. Urban air pollutants show high intra-urban spatial variability linked to urban land use and land cover (LULC). This correlation of air pollutants with LULC is widely recognized; LULC data is an integral input into a wide range of models, especially land use regression models developed by epidemiologists to study the impact of air pollution on human health. Given the demonstrated links between LULC and urban air pollution, and between urban air pollution and health, an interesting question arises: what is the potential of LULC modifications to mitigate the health impacts of urban air pollution? In this dissertation we assess the potential of LULC modifications to mitigate the health impacts of NO2, a respiratory irritant and strong marker for combustion-related air pollution, in the Portland-Vancouver metropolitan area in northwestern USA. We begin by measuring summer and winter NO2 in the area using a spatially dense network of passive NO2 samplers. We next develop an annual average model for NO2 based on the observational data, using random forest -- for the first time in the realm of urban air pollution -- to disentangle the effects of highly correlated LULC variables on ambient NO2 concentrations. We apply this random forest (LURF) model to a 200m spatial grid covering the study area, and use this 200m LURF model to quantify the effect of different urban land use categories on ambient concentrations of NO2. Using the changes in ambient NO2 concentrations resulting from land use modifications as input to BenMAP (a health benefits assessment tool form the US EPA), we assess the NO2-related health impact associated with each land use category and its modifications. We demonstrate how the LURF model can be used to assess the respiratory health benefits of competing land use modifications, including city-wide and local-scale mitigation strategies based on modifying tree canopy and vehicle miles traveled (VMT). Planting trees is a common land cover modification strategy undertaken by cities to reduce air pollution. Statistical models such as LUR and LURF demonstrate a correlation between tree cover and reduced air pollution, but they cannot demonstrate causation. Hence, we run the atmospheric chemistry and transport model CMAQ to examine to what extent the dry deposition mechanism can explain the reduction of NO2 which statistical models associate with tree canopy. Results from our research indicate that even though the Portland-Vancouver area is in compliance with the US EPA NO2 standards, ambient concentrations of NO2 still create an annual health burden of at least $40 million USD. Our model suggests that NO2 associated with high intensity development and VMT may be creating an annual health burden of $7 million and $3.3 million USD respectively. Existing tree canopy, on the other hand, is associated with an annual health benefit of $1.4 million USD. LULC modifications can mitigate some fraction of this health burden. A 2% increase in tree canopy across the study area may reduce incidence rates of asthma exacerbation by as much as 7%. We also find that increasing tree canopy is a more effective strategy than reducing VMT in terms of mitigating the health burden of NO2. CMAQ indicates that the amount of NO2 removed by dry deposition is an order of magnitude smaller than that predicted by our statistical model. About one-third of the difference can be explained by the lower NO2 values predicted by CMAQ, and one-third may be attributable to parameterization of stomatal uptake. Title: Investigating the Potential of Land Use Modifications to Mitigate the Respiratory Health Impacts of NO2: A Case Study in the Portland-Vancouver Metropolitan Area Author: Rao, Meenakshi Year: 2016 The health impacts of urban air pollution are a growing concern in our rapidly urbanizing world. Urban air pollutants show high intra-urban spatial variability linked to urban land use and land cover (LULC). This correlation of air pollutants with LULC is widely recognized; LULC data is an integral input into a wide range of models, especially land use regression models developed by epidemiologists to study the impact of air pollution on human health. Given the demonstrated links between LULC and urban air pollution, and between urban air pollution and health, an interesting question arises: what is the potential of LULC modifications to mitigate the health impacts of urban air pollution? In this dissertation we assess the potential of LULC modifications to mitigate the health impacts of NO2, a respiratory irritant and strong marker for combustion-related air pollution, in the Portland-Vancouver metropolitan area in northwestern USA. We begin by measuring summer and winter NO2 in the area using a spatially dense network of passive NO2 samplers. We next develop an annual average model for NO2 based on the observational data, using random forest -- for the first time in the realm of urban air pollution -- to disentangle the effects of highly correlated LULC variables on ambient NO2 concentrations. We apply this random forest (LURF) model to a 200m spatial grid covering the study area, and use this 200m LURF model to quantify the effect of different urban land use categories on ambient concentrations of NO2. Using the changes in ambient NO2 concentrations resulting from land use modifications as input to BenMAP (a health benefits assessment tool form the US EPA), we assess the NO2-related health impact associated with each land use category and its modifications. We demonstrate how the LURF model can be used to assess the respiratory health benefits of competing land use modifications, including city-wide and local-scale mitigation strategies based on modifying tree canopy and vehicle miles traveled (VMT). Planting trees is a common land cover modification strategy undertaken by cities to reduce air pollution. Statistical models such as LUR and LURF demonstrate a correlation between tree cover and reduced air pollution, but they cannot demonstrate causation. Hence, we run the atmospheric chemistry and transport model CMAQ to examine to what extent the dry deposition mechanism can explain the reduction of NO2 which statistical models associate with tree canopy. Results from our research indicate that even though the Portland-Vancouver area is in compliance with the US EPA NO2 standards, ambient concentrations of NO2 still create an annual health burden of at least $40 million USD. Our model suggests that NO2 associated with high intensity development and VMT may be creating an annual health burden of $7 million and $3.3 million USD respectively. Existing tree canopy, on the other hand, is associated with an annual health benefit of $1.4 million USD. LULC modifications can mitigate some fraction of this health burden. A 2% increase in tree canopy across the study area may reduce incidence rates of asthma exacerbation by as much as 7%. We also find that increasing tree canopy is a more effective strategy than reducing VMT in terms of mitigating the health burden of NO2. CMAQ indicates that the amount of NO2 removed by dry deposition is an order of magnitude smaller than that predicted by our statistical model. About one-third of the difference can be explained by the lower NO2 values predicted by CMAQ, and one-third may be attributable to parameterization of stomatal uptake. Close