Search

Search Results

• 1. [Article] Green River CE-QUAL-W2 Project: A Hydrodynamic and Water Quality Study of the Green River King County, Washington

  This report describes the data processing and model calibration performed for a hydrodynamic and water quality model of the Green River, located in King County, Washington. Figure 1 shows the location ...

  Citation × Citation Citation Abstract Copy Title: Green River CE-QUAL-W2 Project: A Hydrodynamic and Water Quality Study of the Green River King County, Washington Author: Kraft, Tim, Annear, Robert Leslie, Berger, Chris, Wells, Scott A. Year: 2004 This report describes the data processing and model calibration performed for a hydrodynamic and water quality model of the Green River, located in King County, Washington. Figure 1 shows the location of the river, and the limits of the section of river that was modeled. The Green River flows from its headwaters in the Cascade Mountain foothills through the King County, Washington communities of Auburn, Kent, and Tukwila before discharging into the Duwamish River. Two sections of the river were modeled in this project. The Middle Green River begins in the Cascade Mountain foothills east of Tacoma, and continues downstream to the city of Auburn, WA. The Lower Green River continues from Auburn to the confluence with the Duwamish River, in the town of Tukwila. The Green/Duwamish River system is unique in that it flows through a heavily urbanized and industrialized environment yet supports a large salmon population (Green/Duwamish Ecosystem Restoration Study, 2003). To protect the river and its prime salmon habitat, King County and the US Army Corps of Engineers have joined together on a study to identify and implement strategies for restoring and protecting the Green/Duwamish River System and its tributaries (Green/Duwamish Ecosystem Restoration Study, 2003). As part of the Green-Duwamish Watershed Water Quality Assessment Program, King County contracted with Portland State University to develop a hydrodynamic and water quality model for the Lower and Middle Green River. This model will be used in Total Maximum Daily Load (TMDL) development, in assessing current water quality conditions in the river, and as a planning tool for evaluating the impacts of future development in the basin. Title: Green River CE-QUAL-W2 Project: A Hydrodynamic and Water Quality Study of the Green River King County, Washington Author: Kraft, Tim, Annear, Robert Leslie, Berger, Chris, Wells, Scott A. Year: 2004 This report describes the data processing and model calibration performed for a hydrodynamic and water quality model of the Green River, located in King County, Washington. Figure 1 shows the location of the river, and the limits of the section of river that was modeled. The Green River flows from its headwaters in the Cascade Mountain foothills through the King County, Washington communities of Auburn, Kent, and Tukwila before discharging into the Duwamish River. Two sections of the river were modeled in this project. The Middle Green River begins in the Cascade Mountain foothills east of Tacoma, and continues downstream to the city of Auburn, WA. The Lower Green River continues from Auburn to the confluence with the Duwamish River, in the town of Tukwila. The Green/Duwamish River system is unique in that it flows through a heavily urbanized and industrialized environment yet supports a large salmon population (Green/Duwamish Ecosystem Restoration Study, 2003). To protect the river and its prime salmon habitat, King County and the US Army Corps of Engineers have joined together on a study to identify and implement strategies for restoring and protecting the Green/Duwamish River System and its tributaries (Green/Duwamish Ecosystem Restoration Study, 2003). As part of the Green-Duwamish Watershed Water Quality Assessment Program, King County contracted with Portland State University to develop a hydrodynamic and water quality model for the Lower and Middle Green River. This model will be used in Total Maximum Daily Load (TMDL) development, in assessing current water quality conditions in the river, and as a planning tool for evaluating the impacts of future development in the basin. Close

• 2. [Article] Willamette River Basin Temperature TMDL Model: Model Calibration

  The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all ...

  Citation × Citation Citation Abstract Copy Title: Willamette River Basin Temperature TMDL Model: Model Calibration Author: Berger, Chris, McKillip, Michael Lee, Annear, Robert Leslie, Khan, Sher Jamal, Wells, Scott A. Year: 2004 The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all major tributaries (except the Tualatin River where a TMDL process was already concluded). A large section of the Columbia River was also modeled to provide adequate boundary representation of tidal flows in the lower Willamette River. The Willamette River below the Oregon City Falls in the Portland metropolitan area has a typical diurnal tidal range of 1 m. The development of a dynamic model of temperature and hydrodynamics of the entire river basin incorporating shading were primary requirements of this modeling study. The model would be used by DEQ to set temperature limits on point source dischargers and to evaluate the impact of management strategies on river temperatures to improve fish habitat. Some of these strategies included modifications of the dam at the Willamette River Falls south of Portland and channel reconfigurations. The river basin model was originally divided into several reaches. Individual models were developed for each reach. The models were set-up for each section of the Willamette basin as described in Annear et al. (2004a), the models were calibrated to field data and management strategies were evaluated as described in Annear et al (2004b). This report outlines the model calibration of each of these model sections or elements for both the calibration time periods. The calibration period for each model section differs due to the availability of boundary condition data. The model management simulation scenarios (Annear et al, 2004b) also required boundary condition data that extended past the calibration periods. Title: Willamette River Basin Temperature TMDL Model: Model Calibration Author: Berger, Chris, McKillip, Michael Lee, Annear, Robert Leslie, Khan, Sher Jamal, Wells, Scott A. Year: 2004 The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all major tributaries (except the Tualatin River where a TMDL process was already concluded). A large section of the Columbia River was also modeled to provide adequate boundary representation of tidal flows in the lower Willamette River. The Willamette River below the Oregon City Falls in the Portland metropolitan area has a typical diurnal tidal range of 1 m. The development of a dynamic model of temperature and hydrodynamics of the entire river basin incorporating shading were primary requirements of this modeling study. The model would be used by DEQ to set temperature limits on point source dischargers and to evaluate the impact of management strategies on river temperatures to improve fish habitat. Some of these strategies included modifications of the dam at the Willamette River Falls south of Portland and channel reconfigurations. The river basin model was originally divided into several reaches. Individual models were developed for each reach. The models were set-up for each section of the Willamette basin as described in Annear et al. (2004a), the models were calibrated to field data and management strategies were evaluated as described in Annear et al (2004b). This report outlines the model calibration of each of these model sections or elements for both the calibration time periods. The calibration period for each model section differs due to the availability of boundary condition data. The model management simulation scenarios (Annear et al, 2004b) also required boundary condition data that extended past the calibration periods. Close

• 3. [Article] Willamette River Basin Temperature TMDL Model: Model Scenarios

  The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all ...

  Citation × Citation Citation Abstract Copy Title: Willamette River Basin Temperature TMDL Model: Model Scenarios Author: Annear, Robert Leslie, McKillip, Michael Lee, Khan, Sher Jamal, Berger, Chris, Wells, Scott A. Year: 2004 The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all major tributaries (except the Tualatin River where a TMDL process was already concluded). A large section of the Columbia River was also modeled to provide adequate boundary representation of tidal flows in the lower Willamette River. The Willamette River below the Oregon City Falls in the Portland metropolitan area has a typical diurnal tidal range of 1 m. The development of a dynamic model of temperature and hydrodynamics of the entire river basin incorporating shading were primary requirements of this modeling study. The model would be used by DEQ to set temperature limits on point source dischargers and to evaluate the impact of management strategies on river temperatures to improve fish habitat. Some of these strategies included modifications of the dam at the Willamette River Falls south of Portland and channel reconfigurations. Once the models were set-up for each section of the Willamette basin, the model was calibrated to field data and management strategies were evaluated. These are the subjects of two other reports: Annear et al. (2004) and Berger et al. (2004). This report outlines the results of implementing model scenarios for each of the model sections or elements for specific time periods. The model scenario simulation periods used to investigate management scenarios required boundary condition data that extended past the model calibration periods. The model simulation period for year 2001 was from June 1 to October 31 and for year 2002 from April 1 to October 31. Title: Willamette River Basin Temperature TMDL Model: Model Scenarios Author: Annear, Robert Leslie, McKillip, Michael Lee, Khan, Sher Jamal, Berger, Chris, Wells, Scott A. Year: 2004 The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all major tributaries (except the Tualatin River where a TMDL process was already concluded). A large section of the Columbia River was also modeled to provide adequate boundary representation of tidal flows in the lower Willamette River. The Willamette River below the Oregon City Falls in the Portland metropolitan area has a typical diurnal tidal range of 1 m. The development of a dynamic model of temperature and hydrodynamics of the entire river basin incorporating shading were primary requirements of this modeling study. The model would be used by DEQ to set temperature limits on point source dischargers and to evaluate the impact of management strategies on river temperatures to improve fish habitat. Some of these strategies included modifications of the dam at the Willamette River Falls south of Portland and channel reconfigurations. Once the models were set-up for each section of the Willamette basin, the model was calibrated to field data and management strategies were evaluated. These are the subjects of two other reports: Annear et al. (2004) and Berger et al. (2004). This report outlines the results of implementing model scenarios for each of the model sections or elements for specific time periods. The model scenario simulation periods used to investigate management scenarios required boundary condition data that extended past the model calibration periods. The model simulation period for year 2001 was from June 1 to October 31 and for year 2002 from April 1 to October 31. Close

• 4. [Article] Willamette River Basin Temperature TMDL Model: Boundary Conditions and Model Setup

  The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all ...

  Citation × Citation Citation Abstract Copy Title: Willamette River Basin Temperature TMDL Model: Boundary Conditions and Model Setup Author: Annear, Robert Leslie, McKillip, Michael Lee, Khan, Sher Jamal, Berger, Chris, Wells, Scott A. Year: 2004 The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all major tributaries (except the Tualatin River where a TMDL process was already concluded). A large section of the Columbia River was also modeled to provide adequate boundary representation of tidal flows in the lower Willamette River. The Willamette River below the Oregon City Falls in the Portland metropolitan area has a typical diurnal tidal range of 1 m. The development of a dynamic model of temperature and hydrodynamics of the entire river basin incorporating shading were primary requirements of this modeling study. The model would be used by DEQ to set temperature limits on point source dischargers and to evaluate the impact of management strategies on river temperatures to improve fish habitat. Some of these strategies included modifications of the dam at the Willamette River Falls south of Portland and channel reconfigurations. Once the models were set-up for each section of the Willamette basin, the model was calibrated to field data and management strategies were evaluated. These are the subjects of two other reports: Annear et al. (2004b) and Berger et al. (2004). This report outlines the model development of each of these model sections or elements for both the calibration time periods and the management scenario time periods. The calibration period for each model section differs due to the availability of boundary condition data. The model simulation periods used to investigate management scenarios (Annear et al, 2004b) also required boundary condition data that extended past the calibration periods. Title: Willamette River Basin Temperature TMDL Model: Boundary Conditions and Model Setup Author: Annear, Robert Leslie, McKillip, Michael Lee, Khan, Sher Jamal, Berger, Chris, Wells, Scott A. Year: 2004 The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all major tributaries (except the Tualatin River where a TMDL process was already concluded). A large section of the Columbia River was also modeled to provide adequate boundary representation of tidal flows in the lower Willamette River. The Willamette River below the Oregon City Falls in the Portland metropolitan area has a typical diurnal tidal range of 1 m. The development of a dynamic model of temperature and hydrodynamics of the entire river basin incorporating shading were primary requirements of this modeling study. The model would be used by DEQ to set temperature limits on point source dischargers and to evaluate the impact of management strategies on river temperatures to improve fish habitat. Some of these strategies included modifications of the dam at the Willamette River Falls south of Portland and channel reconfigurations. Once the models were set-up for each section of the Willamette basin, the model was calibrated to field data and management strategies were evaluated. These are the subjects of two other reports: Annear et al. (2004b) and Berger et al. (2004). This report outlines the model development of each of these model sections or elements for both the calibration time periods and the management scenario time periods. The calibration period for each model section differs due to the availability of boundary condition data. The model simulation periods used to investigate management scenarios (Annear et al, 2004b) also required boundary condition data that extended past the calibration periods. Close

• 5. [Article] Lake Whatcom Water Quality Model

  A water quality model of Lake Whatcom, Washington was developed as part of a Total Maximum Daily Load Study for the Washington Department of Ecology. Lake Whatcom is a large natural lake which is listed ...

  Citation × Citation Citation Abstract Copy Title: Lake Whatcom Water Quality Model Author: Berger, Chris Year: 2005 A water quality model of Lake Whatcom, Washington was developed as part of a Total Maximum Daily Load Study for the Washington Department of Ecology. Lake Whatcom is a large natural lake which is listed on the 1998 Washington State 303(d) list of waterbodies which do not meet the criterion for dissolved oxygen. Located next to the city of Bellingham, it is approximately 10 miles long and has a surface area of approximately 5000 acres and a maximum depth of over 100 meters. Eutrophication processes in the lake have been accelerated in recent years perhaps by the availability of nutrients from tributary discharges to the basin. Many of these tributaries have accelerated their nutrient loading to the system as a result of development in the watershed. The lake is being modeled using the Corps of Engineer’s model CE-QUAL-W2, which is a two-dimensional, hydrodynamic and water quality model. The project is managed by the Washington Department of Ecology which plans to make recommendations for reduction and allocation of pollutant loads. The objectives of this study were then to develop a hydrodynamic and water quality model of Lake Whatcom, calibrate the model to field data collected from February 2002 through December 2003, and use the model to evaluate strategies for water quality improvement. Title: Lake Whatcom Water Quality Model Author: Berger, Chris Year: 2005 A water quality model of Lake Whatcom, Washington was developed as part of a Total Maximum Daily Load Study for the Washington Department of Ecology. Lake Whatcom is a large natural lake which is listed on the 1998 Washington State 303(d) list of waterbodies which do not meet the criterion for dissolved oxygen. Located next to the city of Bellingham, it is approximately 10 miles long and has a surface area of approximately 5000 acres and a maximum depth of over 100 meters. Eutrophication processes in the lake have been accelerated in recent years perhaps by the availability of nutrients from tributary discharges to the basin. Many of these tributaries have accelerated their nutrient loading to the system as a result of development in the watershed. The lake is being modeled using the Corps of Engineer’s model CE-QUAL-W2, which is a two-dimensional, hydrodynamic and water quality model. The project is managed by the Washington Department of Ecology which plans to make recommendations for reduction and allocation of pollutant loads. The objectives of this study were then to develop a hydrodynamic and water quality model of Lake Whatcom, calibrate the model to field data collected from February 2002 through December 2003, and use the model to evaluate strategies for water quality improvement. Close

• 6. [Article] Application of CE-QUAL-W2 on Tigris River in Iraq

  The Tigris River is the eastern member of the two great rivers in Iraq. Two big rivers pass through Iraq, Mesopotamia. Tigris and Euphrates Rivers with their tributaries form a major river system in the ...

  Citation × Citation Citation Abstract Copy Title: Application of CE-QUAL-W2 on Tigris River in Iraq Author: Al-Murib, Muhanned Year: 2014 The Tigris River is the eastern member of the two great rivers in Iraq. Two big rivers pass through Iraq, Mesopotamia. Tigris and Euphrates Rivers with their tributaries form a major river system in the Middle East. Four riparian countries, Turkey, Syria, Iran, and Iraq, share the Tigris River basin area and Iraq has the majority of this basin area. The total length of the Tigris is 1850 km from which 1418 km is within Iraq. A study area of 880 km from Mosul dam to Kut barrage is modeled using a water quality CE-QUAL-W2 model. CE-QUAL-W2 is a two-dimensional (longitudinal and vertical) water quality model developed by the U.S. Army Corps of Engineers and Portland State University. W2 simulates river circulation, stage, vertical and horizontal velocities, water temperature, and a host of water quality constituents. Total dissolved solids (TDS) is the main concern in Iraq because Iraq heavily depends on its water for irrigation purposes. Therefore, this project discusses the implementation of CE-QUAL-W2 model on Tigris River to simulate flow, temperature, and TDS. Title: Application of CE-QUAL-W2 on Tigris River in Iraq Author: Al-Murib, Muhanned Year: 2014 The Tigris River is the eastern member of the two great rivers in Iraq. Two big rivers pass through Iraq, Mesopotamia. Tigris and Euphrates Rivers with their tributaries form a major river system in the Middle East. Four riparian countries, Turkey, Syria, Iran, and Iraq, share the Tigris River basin area and Iraq has the majority of this basin area. The total length of the Tigris is 1850 km from which 1418 km is within Iraq. A study area of 880 km from Mosul dam to Kut barrage is modeled using a water quality CE-QUAL-W2 model. CE-QUAL-W2 is a two-dimensional (longitudinal and vertical) water quality model developed by the U.S. Army Corps of Engineers and Portland State University. W2 simulates river circulation, stage, vertical and horizontal velocities, water temperature, and a host of water quality constituents. Total dissolved solids (TDS) is the main concern in Iraq because Iraq heavily depends on its water for irrigation purposes. Therefore, this project discusses the implementation of CE-QUAL-W2 model on Tigris River to simulate flow, temperature, and TDS. Close