Search

Search Results

• 1. [Article] Willamette River and Columbia River Waste Load Allocation Model

  A hydrodynamic and water quality model of the Lower Willamette River was developed to evaluate management alternatives designed to improve water quality. The Lower Willamette River is located in Oregon ...

  Citation × Citation Citation Abstract Copy Title: Willamette River and Columbia River Waste Load Allocation Model Author: Berger, Chris, Annear, Robert Leslie, Wells, Scott A. Year: 2002 A hydrodynamic and water quality model of the Lower Willamette River was developed to evaluate management alternatives designed to improve water quality. The Lower Willamette River is located in Oregon and drains a watershed covering 11500 square miles consisting of forested, agricultural, and urban lands. Inflows include treated municipal wastes and industrial effluents along with non-point sources from agricultural, silvicultural and urbanized land. The model was designed to address temperature, dissolved oxygen, algae, pH and bacteria concerns. The Corps of Engineers two-dimensional, laterally averaged, hydrodynamic and water quality model CE-QUAL-W2, Version 3 was applied. CE-QUAL-W2 consists of directly coupled hydrodynamic and water quality transport models and simulates parameters such as temperature, algae concentration, dissolved oxygen concentration, pH, nutrient concentrations and residence time. The model domain covers a total of about 126 river miles, including the Lower Willamette River from its intersection with the Columbia River upstream to Canby Ferry (RM 35.0) and the Columbia River from Bonneville Dam (RM 144.5) to Beaver Army Terminal (River Mile 53.8). Modeling of the Columbia River was necessary to simulate tidal fluctuations and influxes of Columbia River water into the Lower Willamette. Major tributaries and major NPDES point sources were point inflows to the system model. The ability to model multiple water bodies was a feature of CE-QUAL-W2 Version 3 and allows the simulation of river, reservoir or estuary sections with varying bottom slopes separated by dams and other hydraulic structures. The model was calibrated for the summers of 1993, 1994, 1997, 1998, and 1999. Hydrodynamics were calibrated first followed by temperature and water quality. Root mean square error of model water level predictions was generally less than 0.05 m. Because of the short residence time within the model domain, the development of accurate boundary conditions was essential for good model calibration. Title: Willamette River and Columbia River Waste Load Allocation Model Author: Berger, Chris, Annear, Robert Leslie, Wells, Scott A. Year: 2002 A hydrodynamic and water quality model of the Lower Willamette River was developed to evaluate management alternatives designed to improve water quality. The Lower Willamette River is located in Oregon and drains a watershed covering 11500 square miles consisting of forested, agricultural, and urban lands. Inflows include treated municipal wastes and industrial effluents along with non-point sources from agricultural, silvicultural and urbanized land. The model was designed to address temperature, dissolved oxygen, algae, pH and bacteria concerns. The Corps of Engineers two-dimensional, laterally averaged, hydrodynamic and water quality model CE-QUAL-W2, Version 3 was applied. CE-QUAL-W2 consists of directly coupled hydrodynamic and water quality transport models and simulates parameters such as temperature, algae concentration, dissolved oxygen concentration, pH, nutrient concentrations and residence time. The model domain covers a total of about 126 river miles, including the Lower Willamette River from its intersection with the Columbia River upstream to Canby Ferry (RM 35.0) and the Columbia River from Bonneville Dam (RM 144.5) to Beaver Army Terminal (River Mile 53.8). Modeling of the Columbia River was necessary to simulate tidal fluctuations and influxes of Columbia River water into the Lower Willamette. Major tributaries and major NPDES point sources were point inflows to the system model. The ability to model multiple water bodies was a feature of CE-QUAL-W2 Version 3 and allows the simulation of river, reservoir or estuary sections with varying bottom slopes separated by dams and other hydraulic structures. The model was calibrated for the summers of 1993, 1994, 1997, 1998, and 1999. Hydrodynamics were calibrated first followed by temperature and water quality. Root mean square error of model water level predictions was generally less than 0.05 m. Because of the short residence time within the model domain, the development of accurate boundary conditions was essential for good model calibration. Close

• 2. [Article] Theoretical Basis for the CE-QUAL-W2 River Basin Model

  The primary objective of this research is to integrate a riverine model into the existing W2 code that would provide the capability for modeling entire watersheds. This task was accomplished by the following ...

  Citation × Citation Citation Abstract Copy Title: Theoretical Basis for the CE-QUAL-W2 River Basin Model Author: Wells, Scott A., Cole, Thomas M. Year: 2000 The primary objective of this research is to integrate a riverine model into the existing W2 code that would provide the capability for modeling entire watersheds. This task was accomplished by the following steps: • Formal derivation of governing equations and solution algorithm with general channel slope • Detailed analysis of algorithm for linking branches and smooth implementation of boundary conditions between branches • Algorithm development and changes to basic model code (including branch definitions with slope, slope correction to solution algorithm, transfer of momentum between internal branches) These tasks were performed with the following constraints and initiatives: • Utilize the same solution algorithms as the existing code for hydrodynamics and water quality for the riverine system • Allow momentum transfer between adjacent branches for internal head boundary conditions • Refine the turbulence closure hypothesis for riverine sections Title: Theoretical Basis for the CE-QUAL-W2 River Basin Model Author: Wells, Scott A., Cole, Thomas M. Year: 2000 The primary objective of this research is to integrate a riverine model into the existing W2 code that would provide the capability for modeling entire watersheds. This task was accomplished by the following steps: • Formal derivation of governing equations and solution algorithm with general channel slope • Detailed analysis of algorithm for linking branches and smooth implementation of boundary conditions between branches • Algorithm development and changes to basic model code (including branch definitions with slope, slope correction to solution algorithm, transfer of momentum between internal branches) These tasks were performed with the following constraints and initiatives: • Utilize the same solution algorithms as the existing code for hydrodynamics and water quality for the riverine system • Allow momentum transfer between adjacent branches for internal head boundary conditions • Refine the turbulence closure hypothesis for riverine sections Close

• 3. [Article] CE-QUAL-W2: A Two-dimensional, Laterally Averaged, Hydrodynamic and Water Quality Model, Version 3.1

  CE-QUAL-W2 is a two-dimensional, longitudinal/vertical, hydrodynamic and water quality model. Because the model assumes lateral homogeneity, it is best suited for relatively long and narrow waterbodies ...

  Citation × Citation Citation Abstract Copy Title: CE-QUAL-W2: A Two-dimensional, Laterally Averaged, Hydrodynamic and Water Quality Model, Version 3.1 Author: Cole, Thomas M., Wells, Scott A. Year: 2003 CE-QUAL-W2 is a two-dimensional, longitudinal/vertical, hydrodynamic and water quality model. Because the model assumes lateral homogeneity, it is best suited for relatively long and narrow waterbodies exhibiting longitudinal and vertical water quality gradients. The model has been applied to rivers, lakes, reservoirs, estuaries, and combinations thereof. The application of CE-QUAL-W2 requires knowledge in the following areas: 1. Hydrodynamics 2. Aquatic biology 3. Aquatic chemistry 4. Numerical methods 5. Computers and FORTRAN coding 6. Statistics 7. Data assembly and reconstruction. Water quality modeling is in many ways an art requiring not only knowledge in these areas but also experience in their integration. A word of caution to the first time user - model application is a complicated and time-consuming task. Title: CE-QUAL-W2: A Two-dimensional, Laterally Averaged, Hydrodynamic and Water Quality Model, Version 3.1 Author: Cole, Thomas M., Wells, Scott A. Year: 2003 CE-QUAL-W2 is a two-dimensional, longitudinal/vertical, hydrodynamic and water quality model. Because the model assumes lateral homogeneity, it is best suited for relatively long and narrow waterbodies exhibiting longitudinal and vertical water quality gradients. The model has been applied to rivers, lakes, reservoirs, estuaries, and combinations thereof. The application of CE-QUAL-W2 requires knowledge in the following areas: 1. Hydrodynamics 2. Aquatic biology 3. Aquatic chemistry 4. Numerical methods 5. Computers and FORTRAN coding 6. Statistics 7. Data assembly and reconstruction. Water quality modeling is in many ways an art requiring not only knowledge in these areas but also experience in their integration. A word of caution to the first time user - model application is a complicated and time-consuming task. Close

• 4. [Article] TMDLS: Statistical Correlations or Mechanistic Modeling?

  Western Idaho and Eastern Oregon, determinations of the assimilative capacity of the system and the impact of pollutant reduction strategies has been performed using both a statistical-correlation approach ...

  Citation × Citation Citation Abstract Copy Title: TMDLS: Statistical Correlations or Mechanistic Modeling? Author: Wells, Scott A., Cole, Thomas M. Year: 2002 Western Idaho and Eastern Oregon, determinations of the assimilative capacity of the system and the impact of pollutant reduction strategies has been performed using both a statistical-correlation approach and a mechanistic modeling approach. The system included the Lower Snake River, Brownlee Reservoir, Oxbow Reservoir, and Hells Canyon Reservoir with the focus was on Brownlee Reservoir. The statistical approach used on Brownlee Reservoir divided the system into riverine and lacustrine zones. Field data were then averaged over season and location to provide statistical correlations, such as between total phosphorus (TP) and chlorophyll a (chl a), between an anoxic factor (AF) and TP, and between a hypoxic factor (HP) and TP. The anoxic factor is defined as the number of days when dissolved oxygen was less than 2 mg/l and the hypoxic factor was defined as the number of days when dissolved oxygen was less than 6.5 mg/l. The mechanistic approach used a two-dimensional, unsteady, hydrodynamic and water quality model called CE-QUAL-W2. The model was calibrated to field data over a three year period for 1992 (a low flow year), 1995 (an average flow year), and 1997 (a high flow year). Some of the important questions that the TMDL process was to answer included the following. What level of TP is necessary in the river coming into Brownlee Reservoir to reduce the number of days of hypoxia in the reservoir? What are the causes of low2 dissolved oxygen in Brownlee Reservoir and what management strategies can be implemented to improve water quality? This paper examines the strengths and weaknesses of answering management questions using these two approaches. Recommendations are suggested for answering assimilative capacity questions that arise in TMDL studies. Title: TMDLS: Statistical Correlations or Mechanistic Modeling? Author: Wells, Scott A., Cole, Thomas M. Year: 2002 Western Idaho and Eastern Oregon, determinations of the assimilative capacity of the system and the impact of pollutant reduction strategies has been performed using both a statistical-correlation approach and a mechanistic modeling approach. The system included the Lower Snake River, Brownlee Reservoir, Oxbow Reservoir, and Hells Canyon Reservoir with the focus was on Brownlee Reservoir. The statistical approach used on Brownlee Reservoir divided the system into riverine and lacustrine zones. Field data were then averaged over season and location to provide statistical correlations, such as between total phosphorus (TP) and chlorophyll a (chl a), between an anoxic factor (AF) and TP, and between a hypoxic factor (HP) and TP. The anoxic factor is defined as the number of days when dissolved oxygen was less than 2 mg/l and the hypoxic factor was defined as the number of days when dissolved oxygen was less than 6.5 mg/l. The mechanistic approach used a two-dimensional, unsteady, hydrodynamic and water quality model called CE-QUAL-W2. The model was calibrated to field data over a three year period for 1992 (a low flow year), 1995 (an average flow year), and 1997 (a high flow year). Some of the important questions that the TMDL process was to answer included the following. What level of TP is necessary in the river coming into Brownlee Reservoir to reduce the number of days of hypoxia in the reservoir? What are the causes of low2 dissolved oxygen in Brownlee Reservoir and what management strategies can be implemented to improve water quality? This paper examines the strengths and weaknesses of answering management questions using these two approaches. Recommendations are suggested for answering assimilative capacity questions that arise in TMDL studies. Close