Search

Search Results

• 1. [Article] CE-QUAL-W2, Version 3

  CE-QUAL-W2 is a two-dimensional water quality and hydrodynamic code supported by the U.S. Army Engineer Research and Development Center (Cole and Buchak 1995). The model has been widely applied to stratified ...

  Citation × Citation Citation Abstract Copy Title: CE-QUAL-W2, Version 3 Author: Wells, Scott A., Cole, Thomas M. Year: 2000 CE-QUAL-W2 is a two-dimensional water quality and hydrodynamic code supported by the U.S. Army Engineer Research and Development Center (Cole and Buchak 1995). The model has been widely applied to stratified surface water systems such as lakes, reservoirs, and estuaries and computes water levels, horizontal and vertical velocities, temperature, and 21 other water quality parameters (such as dissolved oxygen, nutrients, organic matter, algae, pH, the carbonate cycle, bacteria, and dissolved and suspended solids). A typical model grid is shown in Figure 1 where the vertical axis is aligned with gravity. This technical note documents the development of CE-QUAL-W2, Version 3, which incorporates sloping riverine sections. Version 3 has the capability of modeling entire river basins with rivers and interconnected lakes, reservoirs, and/or estuaries. Four example applications illustrate the use of Version 3. Title: CE-QUAL-W2, Version 3 Author: Wells, Scott A., Cole, Thomas M. Year: 2000 CE-QUAL-W2 is a two-dimensional water quality and hydrodynamic code supported by the U.S. Army Engineer Research and Development Center (Cole and Buchak 1995). The model has been widely applied to stratified surface water systems such as lakes, reservoirs, and estuaries and computes water levels, horizontal and vertical velocities, temperature, and 21 other water quality parameters (such as dissolved oxygen, nutrients, organic matter, algae, pH, the carbonate cycle, bacteria, and dissolved and suspended solids). A typical model grid is shown in Figure 1 where the vertical axis is aligned with gravity. This technical note documents the development of CE-QUAL-W2, Version 3, which incorporates sloping riverine sections. Version 3 has the capability of modeling entire river basins with rivers and interconnected lakes, reservoirs, and/or estuaries. Four example applications illustrate the use of Version 3. Close

• 2. [Article] Validation of the CE-QUAL-W2 Version 3 River Basin Hydrodynamic and Water Quality Model

  CE-QUAL-W2 Version 3, a 2-D (longitudinal-vertical) hydrodynamic and water quality model for river basins combining both river and stratified river-estuary and lakereservoir flow, is a development product ...

  Citation × Citation Citation Abstract Copy Title: Validation of the CE-QUAL-W2 Version 3 River Basin Hydrodynamic and Water Quality Model Author: Wells, Scott A. Year: 2002 CE-QUAL-W2 Version 3, a 2-D (longitudinal-vertical) hydrodynamic and water quality model for river basins combining both river and stratified river-estuary and lakereservoir flow, is a development product of the Waterways Experiment Station in Vicksburg, MS, USA. With the development and release of any revised or reformulated model codes, significant model validation is required. This includes comparison of model results to simple analytical solutions for hydrodynamics and water quality transport, as well as comparison to laboratory and field data. In this paper, the model is compared to numerous analytical solutions for mass transport (1-D advective mass transport) and hydrodynamics (impulsive wind stress on water surface, seiching). Suggestions are presented for proper validation protocols for hydrodynamic and water quality models. Title: Validation of the CE-QUAL-W2 Version 3 River Basin Hydrodynamic and Water Quality Model Author: Wells, Scott A. Year: 2002 CE-QUAL-W2 Version 3, a 2-D (longitudinal-vertical) hydrodynamic and water quality model for river basins combining both river and stratified river-estuary and lakereservoir flow, is a development product of the Waterways Experiment Station in Vicksburg, MS, USA. With the development and release of any revised or reformulated model codes, significant model validation is required. This includes comparison of model results to simple analytical solutions for hydrodynamics and water quality transport, as well as comparison to laboratory and field data. In this paper, the model is compared to numerous analytical solutions for mass transport (1-D advective mass transport) and hydrodynamics (impulsive wind stress on water surface, seiching). Suggestions are presented for proper validation protocols for hydrodynamic and water quality models. Close

• 3. [Article] Basis of the CE-QUAL-W2 Version 3 River Basin Hydrodynamic and Water Quality Model

  CE-QUAL-W2 Version 3, a 2-D (longitudinal-vertical) hydrodynamic and water quality model for river basins combining both river and stratified river-estuary and lake-reservoir flow, is a development product ...

  Citation × Citation Citation Abstract Copy Title: Basis of the CE-QUAL-W2 Version 3 River Basin Hydrodynamic and Water Quality Model Author: Wells, Scott A. Year: 2002 CE-QUAL-W2 Version 3, a 2-D (longitudinal-vertical) hydrodynamic and water quality model for river basins combining both river and stratified river-estuary and lake-reservoir flow, is a development product of the Waterways Experiment Station in Vicksburg, MS, USA. With the development and release of any revised or reformulated model codes, significant model validation is required. This includes comparison of model results to simple analytical solutions for hydrodynamics and water quality transport, as well as comparison to laboratory and field data. In this paper, the model is compared to numerous analytical solutions for mass transport (1- D advective mass transport) and hydrodynamics (impulsive wind stress on water surface, seiching). Suggestions are presented for proper validation protocols for hydrodynamic and water quality models. Title: Basis of the CE-QUAL-W2 Version 3 River Basin Hydrodynamic and Water Quality Model Author: Wells, Scott A. Year: 2002 CE-QUAL-W2 Version 3, a 2-D (longitudinal-vertical) hydrodynamic and water quality model for river basins combining both river and stratified river-estuary and lake-reservoir flow, is a development product of the Waterways Experiment Station in Vicksburg, MS, USA. With the development and release of any revised or reformulated model codes, significant model validation is required. This includes comparison of model results to simple analytical solutions for hydrodynamics and water quality transport, as well as comparison to laboratory and field data. In this paper, the model is compared to numerous analytical solutions for mass transport (1- D advective mass transport) and hydrodynamics (impulsive wind stress on water surface, seiching). Suggestions are presented for proper validation protocols for hydrodynamic and water quality models. Close

• 4. [Article] CE-QUAL-W2 Version 3: Hydrodynamic and Water Quality River Basin Modeling

  CE-QUAL-W2 is a two-dimensional (longitudinal-vertical) water quality and hydrodynamic computer simulation model that was originally developed for deep, long, and narrow waterbodies. The current model, ...

  Citation × Citation Citation Abstract Copy Title: CE-QUAL-W2 Version 3: Hydrodynamic and Water Quality River Basin Modeling Author: Wells, Scott A. Year: 2000 CE-QUAL-W2 is a two-dimensional (longitudinal-vertical) water quality and hydrodynamic computer simulation model that was originally developed for deep, long, and narrow waterbodies. The current model, Version 2, has been used in over 200 river, reservoir/lake, and estuary applications throughout the U.S. and abroad. Version 2, though, cannot accommodate systems that have a significant sloping water surface since the vertical coordinate system is aligned with gravity and vertical accelerations are neglected. The governing equations for CE-QUAL-W2 were re-derived so that it could be applied to entire river basins including river-estuary, lake-river, and reservoir-river systems with channel slopes. This re-derivation is one of many improvements for the Version 3 code. Other improvements include improved numerical schemes, improved and additional water quality algorithms, and algorithms for addition of hydraulic structures (weirs, gates, culverts) between model segments. Test cases for this new code include a 244 km section of the Lower Snake River in Idaho and Oregon; the Bull Run River basin composed of 3 water supply reservoirs and 2 river sections with a 2.2% and a 1.4% average slope in the Oregon Cascade mountains; and the Columbia Slough system in Portland, OR, composed of 33 separate lake systems connected by hydraulic structures and a fresh-water tidal region. Title: CE-QUAL-W2 Version 3: Hydrodynamic and Water Quality River Basin Modeling Author: Wells, Scott A. Year: 2000 CE-QUAL-W2 is a two-dimensional (longitudinal-vertical) water quality and hydrodynamic computer simulation model that was originally developed for deep, long, and narrow waterbodies. The current model, Version 2, has been used in over 200 river, reservoir/lake, and estuary applications throughout the U.S. and abroad. Version 2, though, cannot accommodate systems that have a significant sloping water surface since the vertical coordinate system is aligned with gravity and vertical accelerations are neglected. The governing equations for CE-QUAL-W2 were re-derived so that it could be applied to entire river basins including river-estuary, lake-river, and reservoir-river systems with channel slopes. This re-derivation is one of many improvements for the Version 3 code. Other improvements include improved numerical schemes, improved and additional water quality algorithms, and algorithms for addition of hydraulic structures (weirs, gates, culverts) between model segments. Test cases for this new code include a 244 km section of the Lower Snake River in Idaho and Oregon; the Bull Run River basin composed of 3 water supply reservoirs and 2 river sections with a 2.2% and a 1.4% average slope in the Oregon Cascade mountains; and the Columbia Slough system in Portland, OR, composed of 33 separate lake systems connected by hydraulic structures and a fresh-water tidal region. Close

• 5. [Article] Idaho Pend Oreille River Model: Model Development and Calibration

  The objectives of this project were to: • Develop a hydrodynamic and temperature model of Pend Oreille River using CE-QUAL-W2 Version 3.2 • Calibrate the CE-QUAL-W2 model to field data collected during ...

  Citation × Citation Citation Abstract Copy Title: Idaho Pend Oreille River Model: Model Development and Calibration Author: Annear, Robert Leslie, Berger, Chris, Wells, Scott A. Year: 2006 The objectives of this project were to: • Develop a hydrodynamic and temperature model of Pend Oreille River using CE-QUAL-W2 Version 3.2 • Calibrate the CE-QUAL-W2 model to field data collected during 2004 and 2005 using the following water quality variables: flow, water surface elevation, and velocity temperature o dissolved oxygen nutrients (NO3-N+NO2-N, NH4-N, PO4-P) algae – chlorophyll a BOD5 and dissolved organic matter and particulate organic matter compartments (both labile and refractory) for the organic matter cycling with algae periphyton The model chosen for development was CE-QUAL-W2 Version 3.2 (Cole and Wells, 2004). This is a two-dimensional unsteady hydrodynamic and water quality model that includes typical eutrophication constituents (algae, nutrients, temperature, organic matter, dissolved oxygen, pH). Portland State University’s Water Quality Research Group is a center for development of this modeling tool (see http://www.cee.pdx.edu/w2). The model simulation was run from January 1st, 2004 to September 25th, 2005. The calibration period focused on the summers during each year when water quality data were obtained. Title: Idaho Pend Oreille River Model: Model Development and Calibration Author: Annear, Robert Leslie, Berger, Chris, Wells, Scott A. Year: 2006 The objectives of this project were to: • Develop a hydrodynamic and temperature model of Pend Oreille River using CE-QUAL-W2 Version 3.2 • Calibrate the CE-QUAL-W2 model to field data collected during 2004 and 2005 using the following water quality variables: flow, water surface elevation, and velocity temperature o dissolved oxygen nutrients (NO3-N+NO2-N, NH4-N, PO4-P) algae – chlorophyll a BOD5 and dissolved organic matter and particulate organic matter compartments (both labile and refractory) for the organic matter cycling with algae periphyton The model chosen for development was CE-QUAL-W2 Version 3.2 (Cole and Wells, 2004). This is a two-dimensional unsteady hydrodynamic and water quality model that includes typical eutrophication constituents (algae, nutrients, temperature, organic matter, dissolved oxygen, pH). Portland State University’s Water Quality Research Group is a center for development of this modeling tool (see http://www.cee.pdx.edu/w2). The model simulation was run from January 1st, 2004 to September 25th, 2005. The calibration period focused on the summers during each year when water quality data were obtained. Close