Search

Search Results

• 1. [Article] Continuous Deflection Separation of Stormwater Particulates

  Capture of stormwater particulate matter is of concern to watershed managers trying to meet water quality guidelines by removing toxics associated with particulates from natural water bodies. A laboratory ...

  Citation × Citation Citation Abstract Copy Title: Continuous Deflection Separation of Stormwater Particulates Author: Schwarz, Tracy S., Wells, Scott A. Year: 1999 Capture of stormwater particulate matter is of concern to watershed managers trying to meet water quality guidelines by removing toxics associated with particulates from natural water bodies. A laboratory investigation into particle removal efficiency of a prototype Continuous Deflective Separation (CDS) device was made in the laboratory. Particle size distributions were obtained for roadway drainage surfaces. These distributions were used to assess the predicted performance of a CDS unit in the field. Flow rates in the laboratory tests ranged from 125 GPM (7.9 l/s) to 270 GPM (17.0 l/s). Screen sizes used for testing were 1200 m and 2400 m. Using four different sand types and the two screen sizes, particle capture rates were determined for the CDS unit. Internal velocities were measured at seventy-two measuring positions within the main chamber of the CDS unit. At 270 GPM capture rates based on particle size ranged from 12% to 100% with the 2400 m screen, and 22% to 100% with the 1200 m screen. Cumulative mass capture rates were 73% and 70% for the 1200 m and 2400 m screens, respectively, at 270 gpm and 84% at 125 gpm for the given particle distribution used. Title: Continuous Deflection Separation of Stormwater Particulates Author: Schwarz, Tracy S., Wells, Scott A. Year: 1999 Capture of stormwater particulate matter is of concern to watershed managers trying to meet water quality guidelines by removing toxics associated with particulates from natural water bodies. A laboratory investigation into particle removal efficiency of a prototype Continuous Deflective Separation (CDS) device was made in the laboratory. Particle size distributions were obtained for roadway drainage surfaces. These distributions were used to assess the predicted performance of a CDS unit in the field. Flow rates in the laboratory tests ranged from 125 GPM (7.9 l/s) to 270 GPM (17.0 l/s). Screen sizes used for testing were 1200 m and 2400 m. Using four different sand types and the two screen sizes, particle capture rates were determined for the CDS unit. Internal velocities were measured at seventy-two measuring positions within the main chamber of the CDS unit. At 270 GPM capture rates based on particle size ranged from 12% to 100% with the 2400 m screen, and 22% to 100% with the 1200 m screen. Cumulative mass capture rates were 73% and 70% for the 1200 m and 2400 m screens, respectively, at 270 gpm and 84% at 125 gpm for the given particle distribution used. Close

• 2. [Article] TMDLS: Statistical Correlations or Mechanistic Modeling?

  Western Idaho and Eastern Oregon, determinations of the assimilative capacity of the system and the impact of pollutant reduction strategies has been performed using both a statistical-correlation approach ...

  Citation × Citation Citation Abstract Copy Title: TMDLS: Statistical Correlations or Mechanistic Modeling? Author: Wells, Scott A., Cole, Thomas M. Year: 2002 Western Idaho and Eastern Oregon, determinations of the assimilative capacity of the system and the impact of pollutant reduction strategies has been performed using both a statistical-correlation approach and a mechanistic modeling approach. The system included the Lower Snake River, Brownlee Reservoir, Oxbow Reservoir, and Hells Canyon Reservoir with the focus was on Brownlee Reservoir. The statistical approach used on Brownlee Reservoir divided the system into riverine and lacustrine zones. Field data were then averaged over season and location to provide statistical correlations, such as between total phosphorus (TP) and chlorophyll a (chl a), between an anoxic factor (AF) and TP, and between a hypoxic factor (HP) and TP. The anoxic factor is defined as the number of days when dissolved oxygen was less than 2 mg/l and the hypoxic factor was defined as the number of days when dissolved oxygen was less than 6.5 mg/l. The mechanistic approach used a two-dimensional, unsteady, hydrodynamic and water quality model called CE-QUAL-W2. The model was calibrated to field data over a three year period for 1992 (a low flow year), 1995 (an average flow year), and 1997 (a high flow year). Some of the important questions that the TMDL process was to answer included the following. What level of TP is necessary in the river coming into Brownlee Reservoir to reduce the number of days of hypoxia in the reservoir? What are the causes of low2 dissolved oxygen in Brownlee Reservoir and what management strategies can be implemented to improve water quality? This paper examines the strengths and weaknesses of answering management questions using these two approaches. Recommendations are suggested for answering assimilative capacity questions that arise in TMDL studies. Title: TMDLS: Statistical Correlations or Mechanistic Modeling? Author: Wells, Scott A., Cole, Thomas M. Year: 2002 Western Idaho and Eastern Oregon, determinations of the assimilative capacity of the system and the impact of pollutant reduction strategies has been performed using both a statistical-correlation approach and a mechanistic modeling approach. The system included the Lower Snake River, Brownlee Reservoir, Oxbow Reservoir, and Hells Canyon Reservoir with the focus was on Brownlee Reservoir. The statistical approach used on Brownlee Reservoir divided the system into riverine and lacustrine zones. Field data were then averaged over season and location to provide statistical correlations, such as between total phosphorus (TP) and chlorophyll a (chl a), between an anoxic factor (AF) and TP, and between a hypoxic factor (HP) and TP. The anoxic factor is defined as the number of days when dissolved oxygen was less than 2 mg/l and the hypoxic factor was defined as the number of days when dissolved oxygen was less than 6.5 mg/l. The mechanistic approach used a two-dimensional, unsteady, hydrodynamic and water quality model called CE-QUAL-W2. The model was calibrated to field data over a three year period for 1992 (a low flow year), 1995 (an average flow year), and 1997 (a high flow year). Some of the important questions that the TMDL process was to answer included the following. What level of TP is necessary in the river coming into Brownlee Reservoir to reduce the number of days of hypoxia in the reservoir? What are the causes of low2 dissolved oxygen in Brownlee Reservoir and what management strategies can be implemented to improve water quality? This paper examines the strengths and weaknesses of answering management questions using these two approaches. Recommendations are suggested for answering assimilative capacity questions that arise in TMDL studies. Close