Search

Search Results

• 1. [Article] Coupling the Hydrodynamic and Water Quality Model CE-QUAL-W2 With a Multi-Trophic Fish Bio-Energetics Model for Lake Roosevelt, Washington

  Grand Coulee Dam created Franklin D. Roosevelt Lake as part of the Columbia Basin Project. Located in northeastern Washington State, the Project provides economically important hydropower (19 billion kilowatt ...

  Citation × Citation Citation Abstract Copy Title: Coupling the Hydrodynamic and Water Quality Model CE-QUAL-W2 With a Multi-Trophic Fish Bio-Energetics Model for Lake Roosevelt, Washington Author: McKillip, Michael Lee Year: 2008 Grand Coulee Dam created Franklin D. Roosevelt Lake as part of the Columbia Basin Project. Located in northeastern Washington State, the Project provides economically important hydropower (19 billion kilowatt hours per year), irrigation (225,000 ha), flood control, and sport fishing ($5 to 20 million annually). A good system understanding aids in balancing these beneficial uses for the 230 km long reservoir. The reservoir's atypical 45-day mean residence time is much shorter than a typical lake, and much longer than for a riverine dam. The spring freshet requires drawdowns of 15 to 20 m for flood control—the driving characteristic of reservoir operations. A physically based two-dimensional hydrodynamic and water quality model, CE-QUAL-W2 Version 3.5 (Cole and Wells, 2006), is coupled with a fish bioenergetics model based on the Stockwell and Johnson model (1997, 1999) to examine the effects of hydrodynamics on the reservoir algae-zooplankton-kokanee food web. This model was applied and calibrated to Lake Roosevelt with model improvements of multiple zooplankton compartments and zooplankton omnivory. Calibration parameters included temperature, dissolved oxygen, nutrients, algae, and zooplankton. The fish bioenergetics model is applied over the entire reservoir model space to generate a spatial and temporal fish growth potential distribution. The fish model refinements include sub-daily time-steps and an optimized vertical foraging strategy. The linked model suggests that kokanee fish growth potential is seasonally limited by both warm water and prey densities. While the lake ecology is significantly affected by the reservoir operations in general, the pelagic fish growth potential did not appear sensitive to minor changes in reservoir operations. However, the model suggests that the advantageous foraging locations shift seasonally and that optimal foraging strategies are dependent on fish size. Title: Coupling the Hydrodynamic and Water Quality Model CE-QUAL-W2 With a Multi-Trophic Fish Bio-Energetics Model for Lake Roosevelt, Washington Author: McKillip, Michael Lee Year: 2008 Grand Coulee Dam created Franklin D. Roosevelt Lake as part of the Columbia Basin Project. Located in northeastern Washington State, the Project provides economically important hydropower (19 billion kilowatt hours per year), irrigation (225,000 ha), flood control, and sport fishing ($5 to 20 million annually). A good system understanding aids in balancing these beneficial uses for the 230 km long reservoir. The reservoir's atypical 45-day mean residence time is much shorter than a typical lake, and much longer than for a riverine dam. The spring freshet requires drawdowns of 15 to 20 m for flood control—the driving characteristic of reservoir operations. A physically based two-dimensional hydrodynamic and water quality model, CE-QUAL-W2 Version 3.5 (Cole and Wells, 2006), is coupled with a fish bioenergetics model based on the Stockwell and Johnson model (1997, 1999) to examine the effects of hydrodynamics on the reservoir algae-zooplankton-kokanee food web. This model was applied and calibrated to Lake Roosevelt with model improvements of multiple zooplankton compartments and zooplankton omnivory. Calibration parameters included temperature, dissolved oxygen, nutrients, algae, and zooplankton. The fish bioenergetics model is applied over the entire reservoir model space to generate a spatial and temporal fish growth potential distribution. The fish model refinements include sub-daily time-steps and an optimized vertical foraging strategy. The linked model suggests that kokanee fish growth potential is seasonally limited by both warm water and prey densities. While the lake ecology is significantly affected by the reservoir operations in general, the pelagic fish growth potential did not appear sensitive to minor changes in reservoir operations. However, the model suggests that the advantageous foraging locations shift seasonally and that optimal foraging strategies are dependent on fish size. Close

• 2. [Article] Lake Roosevelt Water Quality and Hydrodynamic Model Calibration with Fish Bioenergetics

  An understanding of the effects of hydrodynamics and reservoir operations on the Franklin D. Roosevelt Lake (Lake Roosevelt) aquatic food web allows for better management of the reservoir. A CE-QUAL-W2, ...

  Citation × Citation Citation Abstract Copy Title: Lake Roosevelt Water Quality and Hydrodynamic Model Calibration with Fish Bioenergetics Author: McKillip, Michael Lee Year: 2007 An understanding of the effects of hydrodynamics and reservoir operations on the Franklin D. Roosevelt Lake (Lake Roosevelt) aquatic food web allows for better management of the reservoir. A CE-QUAL-W2, v.3.5, hydrodynamic and water quality model (Cole and Wells, 20061) is being applied to the reservoir. The models zooplankton algorithms are expanded and a fish bioenergetics model is incorporated. The Lake Roosevelt model extent is shown in Figure 1. The model includes the lacustrine arms up to full pool on the Sanpoil, Kettle, and Colville Rivers; the Spokane River arm up to Little Falls Dam; and the Columbia River from Grand Coulee Dam to the U.S.-Canadian border. The previous companion report, “Boundary Conditions and Set-up” (McKillip, Annear, and Wells, 2006), covered • A limnological overview • Hydrodynamic boundary condition data and model inputs • Grand Coulee Dam structures (powerhouse and spillway characteristics) • Water temperature boundary condition data and model inputs • Meteorological data and model inputs • Water quality boundary condition data • Model bathymetry data and model grid development • Topographic shading • Primary and secondary production data • Kokanee hatchery release data This report discusses the model calibration and issues related to the calibration. This report discusses the topics of: 1) Hydrodynamic calibration: Hydrodynamic calibration focuses on matching the water surface elevation at Grand Coulee Dam. 2) Temperature calibration: Temperature calibration focuses on matching temperature profiles throughout the reservoir and continuous data below Grand Coulee Dam. Many of the calibration issues centered on properly characterizing the localized wind and powerhouse withdrawals. 3) Abiotic water quality calibration: Abiotic water quality calibration focused on matching water quality profile data in the reservoir. The selection of proper rate kinetics and understanding the impact of hydrodynamics on water quality state variables was critical to proper calibration. 4) Bioenergetic (algae, zooplankton, kokanee) modeling approach and calibration 5) Sensitivity analyses Title: Lake Roosevelt Water Quality and Hydrodynamic Model Calibration with Fish Bioenergetics Author: McKillip, Michael Lee Year: 2007 An understanding of the effects of hydrodynamics and reservoir operations on the Franklin D. Roosevelt Lake (Lake Roosevelt) aquatic food web allows for better management of the reservoir. A CE-QUAL-W2, v.3.5, hydrodynamic and water quality model (Cole and Wells, 20061) is being applied to the reservoir. The models zooplankton algorithms are expanded and a fish bioenergetics model is incorporated. The Lake Roosevelt model extent is shown in Figure 1. The model includes the lacustrine arms up to full pool on the Sanpoil, Kettle, and Colville Rivers; the Spokane River arm up to Little Falls Dam; and the Columbia River from Grand Coulee Dam to the U.S.-Canadian border. The previous companion report, “Boundary Conditions and Set-up” (McKillip, Annear, and Wells, 2006), covered • A limnological overview • Hydrodynamic boundary condition data and model inputs • Grand Coulee Dam structures (powerhouse and spillway characteristics) • Water temperature boundary condition data and model inputs • Meteorological data and model inputs • Water quality boundary condition data • Model bathymetry data and model grid development • Topographic shading • Primary and secondary production data • Kokanee hatchery release data This report discusses the model calibration and issues related to the calibration. This report discusses the topics of: 1) Hydrodynamic calibration: Hydrodynamic calibration focuses on matching the water surface elevation at Grand Coulee Dam. 2) Temperature calibration: Temperature calibration focuses on matching temperature profiles throughout the reservoir and continuous data below Grand Coulee Dam. Many of the calibration issues centered on properly characterizing the localized wind and powerhouse withdrawals. 3) Abiotic water quality calibration: Abiotic water quality calibration focused on matching water quality profile data in the reservoir. The selection of proper rate kinetics and understanding the impact of hydrodynamics on water quality state variables was critical to proper calibration. 4) Bioenergetic (algae, zooplankton, kokanee) modeling approach and calibration 5) Sensitivity analyses Close

• 3. [Article] Willamette River Basin Temperature TMDL Model: Model Calibration

  The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all ...

  Citation × Citation Citation Abstract Copy Title: Willamette River Basin Temperature TMDL Model: Model Calibration Author: Berger, Chris, McKillip, Michael Lee, Annear, Robert Leslie, Khan, Sher Jamal, Wells, Scott A. Year: 2004 The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all major tributaries (except the Tualatin River where a TMDL process was already concluded). A large section of the Columbia River was also modeled to provide adequate boundary representation of tidal flows in the lower Willamette River. The Willamette River below the Oregon City Falls in the Portland metropolitan area has a typical diurnal tidal range of 1 m. The development of a dynamic model of temperature and hydrodynamics of the entire river basin incorporating shading were primary requirements of this modeling study. The model would be used by DEQ to set temperature limits on point source dischargers and to evaluate the impact of management strategies on river temperatures to improve fish habitat. Some of these strategies included modifications of the dam at the Willamette River Falls south of Portland and channel reconfigurations. The river basin model was originally divided into several reaches. Individual models were developed for each reach. The models were set-up for each section of the Willamette basin as described in Annear et al. (2004a), the models were calibrated to field data and management strategies were evaluated as described in Annear et al (2004b). This report outlines the model calibration of each of these model sections or elements for both the calibration time periods. The calibration period for each model section differs due to the availability of boundary condition data. The model management simulation scenarios (Annear et al, 2004b) also required boundary condition data that extended past the calibration periods. Title: Willamette River Basin Temperature TMDL Model: Model Calibration Author: Berger, Chris, McKillip, Michael Lee, Annear, Robert Leslie, Khan, Sher Jamal, Wells, Scott A. Year: 2004 The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all major tributaries (except the Tualatin River where a TMDL process was already concluded). A large section of the Columbia River was also modeled to provide adequate boundary representation of tidal flows in the lower Willamette River. The Willamette River below the Oregon City Falls in the Portland metropolitan area has a typical diurnal tidal range of 1 m. The development of a dynamic model of temperature and hydrodynamics of the entire river basin incorporating shading were primary requirements of this modeling study. The model would be used by DEQ to set temperature limits on point source dischargers and to evaluate the impact of management strategies on river temperatures to improve fish habitat. Some of these strategies included modifications of the dam at the Willamette River Falls south of Portland and channel reconfigurations. The river basin model was originally divided into several reaches. Individual models were developed for each reach. The models were set-up for each section of the Willamette basin as described in Annear et al. (2004a), the models were calibrated to field data and management strategies were evaluated as described in Annear et al (2004b). This report outlines the model calibration of each of these model sections or elements for both the calibration time periods. The calibration period for each model section differs due to the availability of boundary condition data. The model management simulation scenarios (Annear et al, 2004b) also required boundary condition data that extended past the calibration periods. Close

• 4. [Article] Willamette River Basin Temperature TMDL Model: Model Scenarios

  The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all ...

  Citation × Citation Citation Abstract Copy Title: Willamette River Basin Temperature TMDL Model: Model Scenarios Author: Annear, Robert Leslie, McKillip, Michael Lee, Khan, Sher Jamal, Berger, Chris, Wells, Scott A. Year: 2004 The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all major tributaries (except the Tualatin River where a TMDL process was already concluded). A large section of the Columbia River was also modeled to provide adequate boundary representation of tidal flows in the lower Willamette River. The Willamette River below the Oregon City Falls in the Portland metropolitan area has a typical diurnal tidal range of 1 m. The development of a dynamic model of temperature and hydrodynamics of the entire river basin incorporating shading were primary requirements of this modeling study. The model would be used by DEQ to set temperature limits on point source dischargers and to evaluate the impact of management strategies on river temperatures to improve fish habitat. Some of these strategies included modifications of the dam at the Willamette River Falls south of Portland and channel reconfigurations. Once the models were set-up for each section of the Willamette basin, the model was calibrated to field data and management strategies were evaluated. These are the subjects of two other reports: Annear et al. (2004) and Berger et al. (2004). This report outlines the results of implementing model scenarios for each of the model sections or elements for specific time periods. The model scenario simulation periods used to investigate management scenarios required boundary condition data that extended past the model calibration periods. The model simulation period for year 2001 was from June 1 to October 31 and for year 2002 from April 1 to October 31. Title: Willamette River Basin Temperature TMDL Model: Model Scenarios Author: Annear, Robert Leslie, McKillip, Michael Lee, Khan, Sher Jamal, Berger, Chris, Wells, Scott A. Year: 2004 The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all major tributaries (except the Tualatin River where a TMDL process was already concluded). A large section of the Columbia River was also modeled to provide adequate boundary representation of tidal flows in the lower Willamette River. The Willamette River below the Oregon City Falls in the Portland metropolitan area has a typical diurnal tidal range of 1 m. The development of a dynamic model of temperature and hydrodynamics of the entire river basin incorporating shading were primary requirements of this modeling study. The model would be used by DEQ to set temperature limits on point source dischargers and to evaluate the impact of management strategies on river temperatures to improve fish habitat. Some of these strategies included modifications of the dam at the Willamette River Falls south of Portland and channel reconfigurations. Once the models were set-up for each section of the Willamette basin, the model was calibrated to field data and management strategies were evaluated. These are the subjects of two other reports: Annear et al. (2004) and Berger et al. (2004). This report outlines the results of implementing model scenarios for each of the model sections or elements for specific time periods. The model scenario simulation periods used to investigate management scenarios required boundary condition data that extended past the model calibration periods. The model simulation period for year 2001 was from June 1 to October 31 and for year 2002 from April 1 to October 31. Close

• 5. [Article] Willamette River Basin Temperature TMDL Model: Boundary Conditions and Model Setup

  The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all ...

  Citation × Citation Citation Abstract Copy Title: Willamette River Basin Temperature TMDL Model: Boundary Conditions and Model Setup Author: Annear, Robert Leslie, McKillip, Michael Lee, Khan, Sher Jamal, Berger, Chris, Wells, Scott A. Year: 2004 The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all major tributaries (except the Tualatin River where a TMDL process was already concluded). A large section of the Columbia River was also modeled to provide adequate boundary representation of tidal flows in the lower Willamette River. The Willamette River below the Oregon City Falls in the Portland metropolitan area has a typical diurnal tidal range of 1 m. The development of a dynamic model of temperature and hydrodynamics of the entire river basin incorporating shading were primary requirements of this modeling study. The model would be used by DEQ to set temperature limits on point source dischargers and to evaluate the impact of management strategies on river temperatures to improve fish habitat. Some of these strategies included modifications of the dam at the Willamette River Falls south of Portland and channel reconfigurations. Once the models were set-up for each section of the Willamette basin, the model was calibrated to field data and management strategies were evaluated. These are the subjects of two other reports: Annear et al. (2004b) and Berger et al. (2004). This report outlines the model development of each of these model sections or elements for both the calibration time periods and the management scenario time periods. The calibration period for each model section differs due to the availability of boundary condition data. The model simulation periods used to investigate management scenarios (Annear et al, 2004b) also required boundary condition data that extended past the calibration periods. Title: Willamette River Basin Temperature TMDL Model: Boundary Conditions and Model Setup Author: Annear, Robert Leslie, McKillip, Michael Lee, Khan, Sher Jamal, Berger, Chris, Wells, Scott A. Year: 2004 The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all major tributaries (except the Tualatin River where a TMDL process was already concluded). A large section of the Columbia River was also modeled to provide adequate boundary representation of tidal flows in the lower Willamette River. The Willamette River below the Oregon City Falls in the Portland metropolitan area has a typical diurnal tidal range of 1 m. The development of a dynamic model of temperature and hydrodynamics of the entire river basin incorporating shading were primary requirements of this modeling study. The model would be used by DEQ to set temperature limits on point source dischargers and to evaluate the impact of management strategies on river temperatures to improve fish habitat. Some of these strategies included modifications of the dam at the Willamette River Falls south of Portland and channel reconfigurations. Once the models were set-up for each section of the Willamette basin, the model was calibrated to field data and management strategies were evaluated. These are the subjects of two other reports: Annear et al. (2004b) and Berger et al. (2004). This report outlines the model development of each of these model sections or elements for both the calibration time periods and the management scenario time periods. The calibration period for each model section differs due to the availability of boundary condition data. The model simulation periods used to investigate management scenarios (Annear et al, 2004b) also required boundary condition data that extended past the calibration periods. Close