Search

Search Results

• 1. [Article] Annealing Effect on SB2S3-TiO2 Nanostructures for Solar Cell Applications

  Nanostructures composited of vertical rutile TiO₂ nanorod arrays and Sb₂S₃ nanoparticles were prepared on an F:SnO₂ conductive glass by hydrothermal method and successive ionic layer adsorption and reaction ...

  Citation × Citation Citation Abstract Copy Title: Annealing Effect on SB2S3-TiO2 Nanostructures for Solar Cell Applications Author: Li, Yitan, Wei, Lin, Zhang, Ruizi, Chen, Yanxue, Mei, Liangmo, Jiao, Jun Year: 2013 Nanostructures composited of vertical rutile TiO₂ nanorod arrays and Sb₂S₃ nanoparticles were prepared on an F:SnO₂ conductive glass by hydrothermal method and successive ionic layer adsorption and reaction method at low temperature. Sb₂S₃-sensitized TiO₂ nanorod solar cells were assembled using the SB₂S₃-TiO₂ nanostructure as the photoanode and a polysulfide solution as an electrolyte. Annealing effects on the optical and photovoltaic properties of SB₂S₃-TiO₂ nanostructure were studied systematically. As the annealing temperatures increased, a regular red shift of the bandgap of Sb₂S₃ nanoparticles was observed, where the bandgap decreased from 2.25 to 1.73 eV. At the same time, the photovoltaic conversion efficiency for the nanostructured solar cells increased from 0.46% up to 1.47% as a consequence of the annealing effect. This improvement can be explained by considering the changes in the morphology, the crystalline quality, and the optical properties caused by the annealing treatment. Title: Annealing Effect on SB2S3-TiO2 Nanostructures for Solar Cell Applications Author: Li, Yitan, Wei, Lin, Zhang, Ruizi, Chen, Yanxue, Mei, Liangmo, Jiao, Jun Year: 2013 Nanostructures composited of vertical rutile TiO₂ nanorod arrays and Sb₂S₃ nanoparticles were prepared on an F:SnO₂ conductive glass by hydrothermal method and successive ionic layer adsorption and reaction method at low temperature. Sb₂S₃-sensitized TiO₂ nanorod solar cells were assembled using the SB₂S₃-TiO₂ nanostructure as the photoanode and a polysulfide solution as an electrolyte. Annealing effects on the optical and photovoltaic properties of SB₂S₃-TiO₂ nanostructure were studied systematically. As the annealing temperatures increased, a regular red shift of the bandgap of Sb₂S₃ nanoparticles was observed, where the bandgap decreased from 2.25 to 1.73 eV. At the same time, the photovoltaic conversion efficiency for the nanostructured solar cells increased from 0.46% up to 1.47% as a consequence of the annealing effect. This improvement can be explained by considering the changes in the morphology, the crystalline quality, and the optical properties caused by the annealing treatment. Close

• 2. [Article] Controlled Fabrication of High-Yield CdS Nanostructures by Compartment Arrangement

  High-yield, high-purity CdS nanostructures were synthesized in a turf-like configuration using an improved vapor-liquid-solid method. To increase the yield, a compartment arrangement was employed. The ...

  Citation × Citation Citation Abstract Copy Title: Controlled Fabrication of High-Yield CdS Nanostructures by Compartment Arrangement Author: Green, Joshua M., Lawrance, Juno, Jiao, Jun Year: 2008 High-yield, high-purity CdS nanostructures were synthesized in a turf-like configuration using an improved vapor-liquid-solid method. To increase the yield, a compartment arrangement was employed. The specific kind of nanostructure fabricated was found to be directly dependent on the temperature in the compartment. Along with the high-yield growth of CdS nanorods, nanowires, and nanobelts, intertwined structures were also observed, and the electron field emission property of the intertwined structures was investigated and compared with that of other type of nanostructures. Photoluminescence measurements at 10 K showed a peak emission from the CdS nanostructures at 485 nm. Title: Controlled Fabrication of High-Yield CdS Nanostructures by Compartment Arrangement Author: Green, Joshua M., Lawrance, Juno, Jiao, Jun Year: 2008 High-yield, high-purity CdS nanostructures were synthesized in a turf-like configuration using an improved vapor-liquid-solid method. To increase the yield, a compartment arrangement was employed. The specific kind of nanostructure fabricated was found to be directly dependent on the temperature in the compartment. Along with the high-yield growth of CdS nanorods, nanowires, and nanobelts, intertwined structures were also observed, and the electron field emission property of the intertwined structures was investigated and compared with that of other type of nanostructures. Photoluminescence measurements at 10 K showed a peak emission from the CdS nanostructures at 485 nm. Close

• 3. [Article] ZnO Nanoneedle/H2O Solid-Liquid Heterojunction-Based Self-Powered Ultraviolet Detector

  ZnO nanoneedle arrays were grown vertically on a fluorine-doped tin oxide-coated glass by hydrothermal method at a relatively low temperature. A self-powered photoelectrochemical cell-type UV detector ...

  Citation × Citation Citation Abstract Copy Title: ZnO Nanoneedle/H2O Solid-Liquid Heterojunction-Based Self-Powered Ultraviolet Detector Author: Li, Qinghao, Wei, Lin, Xie, Yanru, Zhang, Kai, Liu, Lei, Zhu, Dapeng, Jiao, Jun, Chen, Yanxue, Yan, Shishen, Liu, Guolei, Mei, Liangmo Year: 2013 ZnO nanoneedle arrays were grown vertically on a fluorine-doped tin oxide-coated glass by hydrothermal method at a relatively low temperature. A self-powered photoelectrochemical cell-type UV detector was fabricated using the ZnO nanoneedles as the active photoanode and H2O as the electrolyte. This solid-liquid heterojunction offers an enlarged ZnO/water contact area and a direct pathway for electron transport simultaneously. By connecting this UV photodetector to an ammeter, the intensity of UV light can be quantified using the output short-circuit photocurrent without a power source. High photosensitivity, excellent spectral selectivity, and fast photoresponse at zero bias are observed in this UV detector. The self-powered behavior can be well explained by the formation of a space charge layer near the interface of the solid-liquid heterojunction, which results in a built-in potential and makes the solid-liquid heterojunction work in photovoltaic mode. Title: ZnO Nanoneedle/H2O Solid-Liquid Heterojunction-Based Self-Powered Ultraviolet Detector Author: Li, Qinghao, Wei, Lin, Xie, Yanru, Zhang, Kai, Liu, Lei, Zhu, Dapeng, Jiao, Jun, Chen, Yanxue, Yan, Shishen, Liu, Guolei, Mei, Liangmo Year: 2013 ZnO nanoneedle arrays were grown vertically on a fluorine-doped tin oxide-coated glass by hydrothermal method at a relatively low temperature. A self-powered photoelectrochemical cell-type UV detector was fabricated using the ZnO nanoneedles as the active photoanode and H2O as the electrolyte. This solid-liquid heterojunction offers an enlarged ZnO/water contact area and a direct pathway for electron transport simultaneously. By connecting this UV photodetector to an ammeter, the intensity of UV light can be quantified using the output short-circuit photocurrent without a power source. High photosensitivity, excellent spectral selectivity, and fast photoresponse at zero bias are observed in this UV detector. The self-powered behavior can be well explained by the formation of a space charge layer near the interface of the solid-liquid heterojunction, which results in a built-in potential and makes the solid-liquid heterojunction work in photovoltaic mode. Close

• 4. [Article] Annealing Effect on Photovoltaic Performance of CdSe Quantum-Dots-Sensitized TiO2 Nanorod Solar Cells

  Large area rutile TiO₂ nanorod arrays were grown on F:SnO₂ (FTO) conductive glass using a hydrothermal method at low temperature. CdSe quantum dots (QDs) were deposited onto single-crystalline TiO₂ nanorod ...

  Citation × Citation Citation Abstract Copy Title: Annealing Effect on Photovoltaic Performance of CdSe Quantum-Dots-Sensitized TiO2 Nanorod Solar Cells Author: Li, Yitan, Wei, Lin, Zhang, Ruizi, Chen, Yanxue, Jiao, Jun Year: 2012 Large area rutile TiO₂ nanorod arrays were grown on F:SnO₂ (FTO) conductive glass using a hydrothermal method at low temperature. CdSe quantum dots (QDs) were deposited onto single-crystalline TiO₂ nanorod arrays by a chemical bath deposition (CBD) method to make a photoelectrode. The solar cell was assembled using a CdSe-TiO₂ nanostructure as the photoanode and polysulfide solution as the electrolyte. The annealing effect on optical and photovoltaic properties of CdSe quantum-dotssensitized TiO₂ nanorod solar cells was studied systematically. A significant change of the morphology and a regular red shift of band gap of CdSe nanoparticles were observed after annealing treatment. At the same time, an improved photovoltaic performance was obtained for quantum-dots-sensitized solar cell using the annealed CdSe-TiO₂ nanostructure electrode. The power conversion efficiency improved from 0.59% to 1.45% as a consequence of the annealing effect. This improvement can be explained by considering the changes in the morphology, the crystalline quality, and the optical properties caused by annealing treatment. Title: Annealing Effect on Photovoltaic Performance of CdSe Quantum-Dots-Sensitized TiO2 Nanorod Solar Cells Author: Li, Yitan, Wei, Lin, Zhang, Ruizi, Chen, Yanxue, Jiao, Jun Year: 2012 Large area rutile TiO₂ nanorod arrays were grown on F:SnO₂ (FTO) conductive glass using a hydrothermal method at low temperature. CdSe quantum dots (QDs) were deposited onto single-crystalline TiO₂ nanorod arrays by a chemical bath deposition (CBD) method to make a photoelectrode. The solar cell was assembled using a CdSe-TiO₂ nanostructure as the photoanode and polysulfide solution as the electrolyte. The annealing effect on optical and photovoltaic properties of CdSe quantum-dotssensitized TiO₂ nanorod solar cells was studied systematically. A significant change of the morphology and a regular red shift of band gap of CdSe nanoparticles were observed after annealing treatment. At the same time, an improved photovoltaic performance was obtained for quantum-dots-sensitized solar cell using the annealed CdSe-TiO₂ nanostructure electrode. The power conversion efficiency improved from 0.59% to 1.45% as a consequence of the annealing effect. This improvement can be explained by considering the changes in the morphology, the crystalline quality, and the optical properties caused by annealing treatment. Close

• 5. [Article] Aqueous Red-Emitting Silicon Nanoparticles for Cellular Imaging: Consequences of Protecting Against Surface Passivation by Hydroxide and Water for Stable Red Emission

  Stable, aqueous, red-to-near infrared emission is critical for the use of silicon nanoparticles (Si NPs) in biological fluorescence assays, but such Si NPs have been difficult to attain. We report a synthesis ...

  Citation × Citation Citation Abstract Copy Title: Aqueous Red-Emitting Silicon Nanoparticles for Cellular Imaging: Consequences of Protecting Against Surface Passivation by Hydroxide and Water for Stable Red Emission Author: Chiu, Sheng-Kuei, Manhat, Beth Ann, DeBenedetti, William J.I., Brown, Anna L., Fichter, Katye, Vu, Tania, Eastman, Micah, Jiao, Jun, Goforth, Andrea Mitchell Year: 2013 Stable, aqueous, red-to-near infrared emission is critical for the use of silicon nanoparticles (Si NPs) in biological fluorescence assays, but such Si NPs have been difficult to attain. We report a synthesis and surface modification strategy that protects Si NPs and preserves red photoluminescence (PL) in water for more than 6 mo. The Si NPs were synthesized via high temperature reaction, liberated from an oxide matrix, and functionalized via hydrosilylation to yield hydrophobic particles. The hydrophobic Si NPs were phase transferred to water using the surfactant cetyltrimethylammonium bromide (CTAB) with retention of red PL. CTAB apparently serves a double role in providing stable, aqueous, red-emitting Si NPs by (i) forming a hydrophobic barrier between the Si NPs and water and (ii) providing aqueous colloidal stability via the polar head group. We demonstrate preservation of the aqueous red emission of these Si NPs in biological media and examine the effects of pH on emission color. Title: Aqueous Red-Emitting Silicon Nanoparticles for Cellular Imaging: Consequences of Protecting Against Surface Passivation by Hydroxide and Water for Stable Red Emission Author: Chiu, Sheng-Kuei, Manhat, Beth Ann, DeBenedetti, William J.I., Brown, Anna L., Fichter, Katye, Vu, Tania, Eastman, Micah, Jiao, Jun, Goforth, Andrea Mitchell Year: 2013 Stable, aqueous, red-to-near infrared emission is critical for the use of silicon nanoparticles (Si NPs) in biological fluorescence assays, but such Si NPs have been difficult to attain. We report a synthesis and surface modification strategy that protects Si NPs and preserves red photoluminescence (PL) in water for more than 6 mo. The Si NPs were synthesized via high temperature reaction, liberated from an oxide matrix, and functionalized via hydrosilylation to yield hydrophobic particles. The hydrophobic Si NPs were phase transferred to water using the surfactant cetyltrimethylammonium bromide (CTAB) with retention of red PL. CTAB apparently serves a double role in providing stable, aqueous, red-emitting Si NPs by (i) forming a hydrophobic barrier between the Si NPs and water and (ii) providing aqueous colloidal stability via the polar head group. We demonstrate preservation of the aqueous red emission of these Si NPs in biological media and examine the effects of pH on emission color. Close