Search

Search Results

• 1. [Article] Durability of room-temperature-setting and intermediate-temperature-setting resin glues cured to different degrees in Yellow Birch plywood

  This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft design criteria under the supervision of the Aeronautical Board.

  Citation × Citation Citation Abstract Copy Title: Durability of room-temperature-setting and intermediate-temperature-setting resin glues cured to different degrees in Yellow Birch plywood Author: Forest Products Laboratory (U.S.), Olson, W. Z., Black, John M. This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft design criteria under the supervision of the Aeronautical Board. Title: Durability of room-temperature-setting and intermediate-temperature-setting resin glues cured to different degrees in Yellow Birch plywood Author: Forest Products Laboratory (U.S.), Olson, W. Z., Black, John M. This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft design criteria under the supervision of the Aeronautical Board. Close

• 2. [Article] Method of computing the rate of temperature change in wood and plywood panels when the two opposite surfaces are maintained at different temperatures

  Information reviewed and reaffirmed, September 1956.

  Citation × Citation Citation Abstract Copy Title: Method of computing the rate of temperature change in wood and plywood panels when the two opposite surfaces are maintained at different temperatures Author: MacLean, J. D. (James Donald), Forest Products Laboratory (U.S.) Information reviewed and reaffirmed, September 1956. Title: Method of computing the rate of temperature change in wood and plywood panels when the two opposite surfaces are maintained at different temperatures Author: MacLean, J. D. (James Donald), Forest Products Laboratory (U.S.) Information reviewed and reaffirmed, September 1956. Close

• 3. [Article] High temperature drying : its application to the drying of lumber

  Information reviewed and reaffirmed 1963

  Citation × Citation Citation Abstract Copy Title: High temperature drying : its application to the drying of lumber Author: Forest Products Laboratory (U.S.) Information reviewed and reaffirmed 1963 Title: High temperature drying : its application to the drying of lumber Author: Forest Products Laboratory (U.S.) Information reviewed and reaffirmed 1963 Close

• 4. [Article] Fatigue test of phenolic laminate at high stress levels and elevated temperatures

  This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce.

  Citation × Citation Citation Abstract Copy Title: Fatigue test of phenolic laminate at high stress levels and elevated temperatures Author: Stevens, Gordon H., Forest Products Laboratory (U.S.) This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce. Title: Fatigue test of phenolic laminate at high stress levels and elevated temperatures Author: Stevens, Gordon H., Forest Products Laboratory (U.S.) This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce. Close

• 5. [Article] Strength of aluminum lap joints at elevated temperatures (tests conducted immediately after the temperature was reached)

  This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on aircraft design criteria under the supervision of the Aircraft Committee of the Munitions Board. Information ...

  Citation × Citation Citation Abstract Copy Title: Strength of aluminum lap joints at elevated temperatures (tests conducted immediately after the temperature was reached) Author: Forest Products Laboratory (U.S.), Kuenzi, Edward W. This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on aircraft design criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed May 1954 and 1962. This report was originally published December 1949. Title: Strength of aluminum lap joints at elevated temperatures (tests conducted immediately after the temperature was reached) Author: Forest Products Laboratory (U.S.), Kuenzi, Edward W. This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on aircraft design criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed May 1954 and 1962. This report was originally published December 1949. Close

• 6. [Article] Effect of closed assembly time on joint strength in gluing with low-temperature-setting phenol, resorcinol, and melamine glues

  This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft design criteria under the supervision of the Aeronautical Board.

  Citation × Citation Citation Abstract Copy Title: Effect of closed assembly time on joint strength in gluing with low-temperature-setting phenol, resorcinol, and melamine glues Author: Forest Products Laboratory (U.S.), Olson, W. Z. This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft design criteria under the supervision of the Aeronautical Board. Title: Effect of closed assembly time on joint strength in gluing with low-temperature-setting phenol, resorcinol, and melamine glues Author: Forest Products Laboratory (U.S.), Olson, W. Z. This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft design criteria under the supervision of the Aeronautical Board. Close

• 7. [Article] Effects of elevated curing temperatures on the strength and durability of yellow birch plywood joints made with room-temperature-setting urea glues

  Information reviewed and reaffirmed, 1961. Original report dated 1945.

  Citation × Citation Citation Abstract Copy Title: Effects of elevated curing temperatures on the strength and durability of yellow birch plywood joints made with room-temperature-setting urea glues Author: Forest Products Laboratory (U.S.), Bruce, H. D., Olson, W. Z., Black, John M. Information reviewed and reaffirmed, 1961. Original report dated 1945. Title: Effects of elevated curing temperatures on the strength and durability of yellow birch plywood joints made with room-temperature-setting urea glues Author: Forest Products Laboratory (U.S.), Bruce, H. D., Olson, W. Z., Black, John M. Information reviewed and reaffirmed, 1961. Original report dated 1945. Close

• 8. [Article] Development of joint strength in birch plywood glued with phenol-, resorcinol-, and melamine-resin glues cured at several temperatures

  Information reviewed and reaffirmed August 1960.

  Citation × Citation Citation Abstract Copy Title: Development of joint strength in birch plywood glued with phenol-, resorcinol-, and melamine-resin glues cured at several temperatures Author: Forest Products Laboratory (U.S.), Bruce, H. D., Olson, W. Z., Rauch, A. H., Black, John M. Information reviewed and reaffirmed August 1960. Title: Development of joint strength in birch plywood glued with phenol-, resorcinol-, and melamine-resin glues cured at several temperatures Author: Forest Products Laboratory (U.S.), Bruce, H. D., Olson, W. Z., Rauch, A. H., Black, John M. Information reviewed and reaffirmed August 1960. Close

• 9. [Article] Curing of resorcinol-resin glues at temperatures from 40 degrees to 80 degrees F.

  Information reviewed and reaffirmed August 1958. Original report issued August 1946.

  Citation × Citation Citation Abstract Copy Title: Curing of resorcinol-resin glues at temperatures from 40 degrees to 80 degrees F. Author: Forest Products Laboratory (U.S.), Bruce, H. D., Olson, W. Z., Soper, V. R. Information reviewed and reaffirmed August 1958. Original report issued August 1946. Title: Curing of resorcinol-resin glues at temperatures from 40 degrees to 80 degrees F. Author: Forest Products Laboratory (U.S.), Bruce, H. D., Olson, W. Z., Soper, V. R. Information reviewed and reaffirmed August 1958. Original report issued August 1946. Close

• 10. [Article] Temperatures obtained in timbers when the surface temperature is changed after various periods of heating

  Citation × Citation Citation Abstract Copy Title: Temperatures obtained in timbers when the surface temperature is changed after various periods of heating Author: MacLean, J. D. (James Donald), Forest Products Laboratory (U.S.) Title: Temperatures obtained in timbers when the surface temperature is changed after various periods of heating Author: MacLean, J. D. (James Donald), Forest Products Laboratory (U.S.) Close

• 11. [Article] Effect of temperature and restraint during drying on the tensile properties of handsheets

  Citation × Citation Citation Abstract Copy Title: Effect of temperature and restraint during drying on the tensile properties of handsheets Author: Chilson, Warren A., Setterholm, Vance C., Forest Products Laboratory (U.S.), Luey, A. T. Title: Effect of temperature and restraint during drying on the tensile properties of handsheets Author: Chilson, Warren A., Setterholm, Vance C., Forest Products Laboratory (U.S.), Luey, A. T. Close

• 12. [Article] Need for uniformity of temperature in a forced-air-circulation, ventilated, compartment dry kiln

  Revised February 1956

  Citation × Citation Citation Abstract Copy Title: Need for uniformity of temperature in a forced-air-circulation, ventilated, compartment dry kiln Author: Forest Products Laboratory (U.S.), Rasmussen, Edmund F. Revised February 1956 Title: Need for uniformity of temperature in a forced-air-circulation, ventilated, compartment dry kiln Author: Forest Products Laboratory (U.S.), Rasmussen, Edmund F. Revised February 1956 Close

• 13. [Article] Statistical variations in the lap-joint strength of metal-bonding adhesives at elevated temperatures

  This report is one of a series issued in cooperation with the ANC-23 panel on composite construction for flight vehicles of the departments of the Air Force, Navy, and Commerce.

  Citation × Citation Citation Abstract Copy Title: Statistical variations in the lap-joint strength of metal-bonding adhesives at elevated temperatures Author: Eickner, Herbert W., Forest Products Laboratory (U.S.), Olson, W. Z. This report is one of a series issued in cooperation with the ANC-23 panel on composite construction for flight vehicles of the departments of the Air Force, Navy, and Commerce. Title: Statistical variations in the lap-joint strength of metal-bonding adhesives at elevated temperatures Author: Eickner, Herbert W., Forest Products Laboratory (U.S.), Olson, W. Z. This report is one of a series issued in cooperation with the ANC-23 panel on composite construction for flight vehicles of the departments of the Air Force, Navy, and Commerce. Close

• 14. [Article] Predicting the strength of reinforced plastic laminates with temperature gradients

  This report issued in cooperation with the Bureau of Naval Weapons, Departments of the Navy.

  Citation × Citation Citation Abstract Copy Title: Predicting the strength of reinforced plastic laminates with temperature gradients Author: Forest Products Laboratory (U.S.), Boller, Kenneth H. This report issued in cooperation with the Bureau of Naval Weapons, Departments of the Navy. Title: Predicting the strength of reinforced plastic laminates with temperature gradients Author: Forest Products Laboratory (U.S.), Boller, Kenneth H. This report issued in cooperation with the Bureau of Naval Weapons, Departments of the Navy. Close

• 15. [Article] The perpendicular-to-grain mechanical properties of red oak as related to temperature, moisture content, and time

  Citation × Citation Citation Abstract Copy Title: The perpendicular-to-grain mechanical properties of red oak as related to temperature, moisture content, and time Author: Forest Products Laboratory (U.S.), Youngs, R. L. (Robert Leland), 1924- Title: The perpendicular-to-grain mechanical properties of red oak as related to temperature, moisture content, and time Author: Forest Products Laboratory (U.S.), Youngs, R. L. (Robert Leland), 1924- Close

• 16. [Article] Effect of elevated temperatures on the strengths of small specimens of sandwich construction of the aircraft type : glass-cloth facings, balsa core -- tested immediately after the test temperature was reached

  This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on aircraft design criteria under the supervision of the Aircraft Committee of the Munitions Board. Information ...

  Citation × Citation Citation Abstract Copy Title: Effect of elevated temperatures on the strengths of small specimens of sandwich construction of the aircraft type : glass-cloth facings, balsa core -- tested immediately after the test temperature was reached Author: Forest Products Laboratory (U.S.), Kuenzi, Edward W. This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on aircraft design criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1958. Original report issued April 1952. Title: Effect of elevated temperatures on the strengths of small specimens of sandwich construction of the aircraft type : glass-cloth facings, balsa core -- tested immediately after the test temperature was reached Author: Forest Products Laboratory (U.S.), Kuenzi, Edward W. This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on aircraft design criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1958. Original report issued April 1952. Close

• 17. [Article] Effect of elevated temperatures on the strengths of small specimens of sandwich construction of the aircraft type : tests conducted after exposure to elevated temperatures for 192 hours

  This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on aircraft design criteria under the supervision of the Aircraft Committee of the Munitions Board. Information ...

  Citation × Citation Citation Abstract Copy Title: Effect of elevated temperatures on the strengths of small specimens of sandwich construction of the aircraft type : tests conducted after exposure to elevated temperatures for 192 hours Author: Forest Products Laboratory (U.S.), Kuenzi, Edward W. This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on aircraft design criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1958. Title: Effect of elevated temperatures on the strengths of small specimens of sandwich construction of the aircraft type : tests conducted after exposure to elevated temperatures for 192 hours Author: Forest Products Laboratory (U.S.), Kuenzi, Edward W. This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on aircraft design criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1958. Close

• 18. [Article] Study of temperature and moisture content in wood aircraft wings in different climates

  This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft design criteria under the supervision of the Aeronautical Board.

  Citation × Citation Citation Abstract Copy Title: Study of temperature and moisture content in wood aircraft wings in different climates Author: Forest Products Laboratory (U.S.), Schwebs, A. C., Downs, Leslie E., Browne, F. L. (Frederick Lincoln), 1895-, Laughnan, Don F. This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft design criteria under the supervision of the Aeronautical Board. Title: Study of temperature and moisture content in wood aircraft wings in different climates Author: Forest Products Laboratory (U.S.), Schwebs, A. C., Downs, Leslie E., Browne, F. L. (Frederick Lincoln), 1895-, Laughnan, Don F. This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft design criteria under the supervision of the Aeronautical Board. Close

• 19. [Article] Development of strength in yellow birch lap joints glued with six resorcinol-resin glues at temperatures from 40 degrees to 80 degrees F.

  Citation × Citation Citation Abstract Copy Title: Development of strength in yellow birch lap joints glued with six resorcinol-resin glues at temperatures from 40 degrees to 80 degrees F. Author: Forest Products Laboratory (U.S.), Olson, W. Z., Blomquist, Richard Frederick, 1912- Title: Development of strength in yellow birch lap joints glued with six resorcinol-resin glues at temperatures from 40 degrees to 80 degrees F. Author: Forest Products Laboratory (U.S.), Olson, W. Z., Blomquist, Richard Frederick, 1912- Close

• 20. [Article] Influence of temperature on relative humidity within confined spaces with and without a desiccant

  Information reviewed and reaffirmed 1959.

  Citation × Citation Citation Abstract Copy Title: Influence of temperature on relative humidity within confined spaces with and without a desiccant Author: Forest Products Laboratory (U.S.), Lassen, Leon E. Information reviewed and reaffirmed 1959. Title: Influence of temperature on relative humidity within confined spaces with and without a desiccant Author: Forest Products Laboratory (U.S.), Lassen, Leon E. Information reviewed and reaffirmed 1959. Close

• 21. [Article] Effect of high and low temperatures on resin glue joints in birch plywood

  Information reviewed and reaffirmed, March 1956. Revised January 1944.

  Citation × Citation Citation Abstract Copy Title: Effect of high and low temperatures on resin glue joints in birch plywood Author: Forest Products Laboratory (U.S.), Blomquist, Richard Frederick, 1912- Information reviewed and reaffirmed, March 1956. Revised January 1944. Title: Effect of high and low temperatures on resin glue joints in birch plywood Author: Forest Products Laboratory (U.S.), Blomquist, Richard Frederick, 1912- Information reviewed and reaffirmed, March 1956. Revised January 1944. Close

• 22. [Article] A study of temperatures attained in a dummy aircraft wing during the summer at Madison, Wisconsin

  Publication restriction has been removed. This report is one of a series issued to aid the nation's war program.

  Citation × Citation Citation Abstract Copy Title: A study of temperatures attained in a dummy aircraft wing during the summer at Madison, Wisconsin Author: Heebink, Bruce G., Forest Products Laboratory (U.S.), Fleischer, Herbert O., Browne, F. L. (Frederick Lincoln), 1895-, Laughnan, Don F. Publication restriction has been removed. This report is one of a series issued to aid the nation's war program. Title: A study of temperatures attained in a dummy aircraft wing during the summer at Madison, Wisconsin Author: Heebink, Bruce G., Forest Products Laboratory (U.S.), Fleischer, Herbert O., Browne, F. L. (Frederick Lincoln), 1895-, Laughnan, Don F. Publication restriction has been removed. This report is one of a series issued to aid the nation's war program. Close

• 23. [Article] Summary of a study of temperatures attained in a dummy aircraft wing during the summer at Madison, Wisconsin

  Publication restriction has been removed. This report is one of a series issued to aid the nation's war program.

  Citation × Citation Citation Abstract Copy Title: Summary of a study of temperatures attained in a dummy aircraft wing during the summer at Madison, Wisconsin Author: Heebink, Bruce G., Forest Products Laboratory (U.S.), Fleischer, Herbert O., Browne, F. L. (Frederick Lincoln), 1895-, Laughnan, Don F. Publication restriction has been removed. This report is one of a series issued to aid the nation's war program. Title: Summary of a study of temperatures attained in a dummy aircraft wing during the summer at Madison, Wisconsin Author: Heebink, Bruce G., Forest Products Laboratory (U.S.), Fleischer, Herbert O., Browne, F. L. (Frederick Lincoln), 1895-, Laughnan, Don F. Publication restriction has been removed. This report is one of a series issued to aid the nation's war program. Close

• 24. [Article] Determination of degree of cure of low-temperature phenolic-resin glues by solubility methods

  This report is one of a series issued in cooperation with the Army Air Forces and the Bureau of Aeronautics under the supervision of the Aeronautical Board.

  Citation × Citation Citation Abstract Copy Title: Determination of degree of cure of low-temperature phenolic-resin glues by solubility methods Author: Forest Products Laboratory (U.S.), Blomquist, Richard Frederick, 1912- This report is one of a series issued in cooperation with the Army Air Forces and the Bureau of Aeronautics under the supervision of the Aeronautical Board. Title: Determination of degree of cure of low-temperature phenolic-resin glues by solubility methods Author: Forest Products Laboratory (U.S.), Blomquist, Richard Frederick, 1912- This report is one of a series issued in cooperation with the Army Air Forces and the Bureau of Aeronautics under the supervision of the Aeronautical Board. Close

• 25. [Article] Tensile strength at elevated temperature of glued joints between aluminum and end-grain balsa

  This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft design criteria under the supervision of the Aeronautical Board.

  Citation × Citation Citation Abstract Copy Title: Tensile strength at elevated temperature of glued joints between aluminum and end-grain balsa Author: Eickner, Herbert W., Forest Products Laboratory (U.S.) This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft design criteria under the supervision of the Aeronautical Board. Title: Tensile strength at elevated temperature of glued joints between aluminum and end-grain balsa Author: Eickner, Herbert W., Forest Products Laboratory (U.S.) This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft design criteria under the supervision of the Aeronautical Board. Close

• 26. [Article] The effect of temperature on certain mechanical properties of Forest Products Laboratory, high-strength, cross-laminated paper plastic (papreg)

  Publication restrictions have been removed. This report is one of a series issued in cooperation with the Army Air Forces and the Bureau of Aeronautics under the supervision of the Aeronautical Board.

  Citation × Citation Citation Abstract Copy Title: The effect of temperature on certain mechanical properties of Forest Products Laboratory, high-strength, cross-laminated paper plastic (papreg) Author: Forest Products Laboratory (U.S.) Publication restrictions have been removed. This report is one of a series issued in cooperation with the Army Air Forces and the Bureau of Aeronautics under the supervision of the Aeronautical Board. Title: The effect of temperature on certain mechanical properties of Forest Products Laboratory, high-strength, cross-laminated paper plastic (papreg) Author: Forest Products Laboratory (U.S.) Publication restrictions have been removed. This report is one of a series issued in cooperation with the Army Air Forces and the Bureau of Aeronautics under the supervision of the Aeronautical Board. Close

• 27. [Article] Factors affecting the strength of papreg : Some strength properties at elevated and subnormal temperatures

  Information reviewed and reaffirmed January 1959 and 1965. Original report issued Jan. 1945.

  Citation × Citation Citation Abstract Copy Title: Factors affecting the strength of papreg : Some strength properties at elevated and subnormal temperatures Author: Forest Products Laboratory (U.S.), Meyer, H. R., Erickson, E. C. O. Information reviewed and reaffirmed January 1959 and 1965. Original report issued Jan. 1945. Title: Factors affecting the strength of papreg : Some strength properties at elevated and subnormal temperatures Author: Forest Products Laboratory (U.S.), Meyer, H. R., Erickson, E. C. O. Information reviewed and reaffirmed January 1959 and 1965. Original report issued Jan. 1945. Close

• 28. [Article] Effect of high pit temperature and of preheating of the wood on the grinding of loblolly pine

  Published in Paper Trade Journal, July 9, 1936

  Citation × Citation Citation Abstract Copy Title: Effect of high pit temperature and of preheating of the wood on the grinding of loblolly pine Author: Pew, John C., Forest Products Laboratory (U.S.), Schafer, Earl R., Knechtges, R. G. Published in Paper Trade Journal, July 9, 1936 Title: Effect of high pit temperature and of preheating of the wood on the grinding of loblolly pine Author: Pew, John C., Forest Products Laboratory (U.S.), Schafer, Earl R., Knechtges, R. G. Published in Paper Trade Journal, July 9, 1936 Close

• 29. [Article] Temperatures necessary to kill fungi in wood

  Published in Proceedings of the American Wood Preservers' Association, 1937

  Citation × Citation Citation Abstract Copy Title: Temperatures necessary to kill fungi in wood Author: Forest Products Laboratory (U.S.), Chidester, Mae Spradling Published in Proceedings of the American Wood Preservers' Association, 1937 Title: Temperatures necessary to kill fungi in wood Author: Forest Products Laboratory (U.S.), Chidester, Mae Spradling Published in Proceedings of the American Wood Preservers' Association, 1937 Close

• 30. [Article] Devices that measure and control temperature in dry kilns

  Revised December 1956

  Citation × Citation Citation Abstract Copy Title: Devices that measure and control temperature in dry kilns Author: Forest Products Laboratory (U.S.), Kimball, Kenneth Edmund Revised December 1956 Title: Devices that measure and control temperature in dry kilns Author: Forest Products Laboratory (U.S.), Kimball, Kenneth Edmund Revised December 1956 Close

• 31. [Article] Temperatures necessary to kill fungi in wood.

  Citation × Citation Citation Abstract Copy Title: Temperatures necessary to kill fungi in wood. Author: Forest Products Laboratory (U.S.) Title: Temperatures necessary to kill fungi in wood. Author: Forest Products Laboratory (U.S.) Close

• 32. [Article] Methods of testing sandwich construction at elevated temperatures

  Citation × Citation Citation Abstract Copy Title: Methods of testing sandwich construction at elevated temperatures Author: Forest Products Laboratory (U.S.), Kuenzi, Edward W. Title: Methods of testing sandwich construction at elevated temperatures Author: Forest Products Laboratory (U.S.), Kuenzi, Edward W. Close

• 33. [Article] Comparison of several freeness testers on board stock

  Citation × Citation Citation Abstract Copy Title: Comparison of several freeness testers on board stock Author: Forest Products Laboratory (U.S.), Hrubesky, Clarence Earl Title: Comparison of several freeness testers on board stock Author: Forest Products Laboratory (U.S.), Hrubesky, Clarence Earl Close

• 34. [Article] Kinetics of the hydrolysis of wood and of the decomposition of sugars in dilute acid at high temperatures

  Citation × Citation Citation Abstract Copy Title: Kinetics of the hydrolysis of wood and of the decomposition of sugars in dilute acid at high temperatures Author: Forest Products Laboratory (U.S.), Saeman, Jerome F. Title: Kinetics of the hydrolysis of wood and of the decomposition of sugars in dilute acid at high temperatures Author: Forest Products Laboratory (U.S.), Saeman, Jerome F. Close

• 35. [Article] Overheating reduces strength of animal glue.

  Citation × Citation Citation Abstract Copy Title: Overheating reduces strength of animal glue. Author: Forest Products Laboratory (U.S.) Title: Overheating reduces strength of animal glue. Author: Forest Products Laboratory (U.S.) Close

• 36. [Article] Ignition and charring temperatures of wood

  Slightly revised (author's name removed) January 1958.

  Citation × Citation Citation Abstract Copy Title: Ignition and charring temperatures of wood Author: Forest Products Laboratory (U.S.) Slightly revised (author's name removed) January 1958. Title: Ignition and charring temperatures of wood Author: Forest Products Laboratory (U.S.) Slightly revised (author's name removed) January 1958. Close

• 37. [Article] Thermodynamics of the swelling of wood

  Information reviewed and reaffirmed, June 1960.

  Citation × Citation Citation Abstract Copy Title: Thermodynamics of the swelling of wood Author: Forest Products Laboratory (U.S.) Information reviewed and reaffirmed, June 1960. Title: Thermodynamics of the swelling of wood Author: Forest Products Laboratory (U.S.) Information reviewed and reaffirmed, June 1960. Close

• 38. [Article] Effect of moisture content of wood on joint strength in gluing Birch veneer and Maple lumber with room-temperature-setting and intermediate-temperature-setting phenol, resorcinol, and melamine glues

  This report is one of a series issued in cooperation with Army-Navy-Civil Committee on aircraft design criteria under the supervision of the Aeronautical Board. Information reiewed and reaffirmed August ...

  Citation × Citation Citation Abstract Copy Title: Effect of moisture content of wood on joint strength in gluing Birch veneer and Maple lumber with room-temperature-setting and intermediate-temperature-setting phenol, resorcinol, and melamine glues Author: Forest Products Laboratory (U.S.), Olson, W. Z. This report is one of a series issued in cooperation with Army-Navy-Civil Committee on aircraft design criteria under the supervision of the Aeronautical Board. Information reiewed and reaffirmed August 1954. Title: Effect of moisture content of wood on joint strength in gluing Birch veneer and Maple lumber with room-temperature-setting and intermediate-temperature-setting phenol, resorcinol, and melamine glues Author: Forest Products Laboratory (U.S.), Olson, W. Z. This report is one of a series issued in cooperation with Army-Navy-Civil Committee on aircraft design criteria under the supervision of the Aeronautical Board. Information reiewed and reaffirmed August 1954. Close

• 39. [Article] The shear, fatigue, bend, impact, and long-time-load strength properties of structural metal-to-metal adhesives in bonds to 24S-T3 aluminum alloy

  Information reviewed and reaffirmed May 1959 and 1965. Report originally published June 1953.

  Citation × Citation Citation Abstract Copy Title: The shear, fatigue, bend, impact, and long-time-load strength properties of structural metal-to-metal adhesives in bonds to 24S-T3 aluminum alloy Author: Eickner, Herbert W., Forest Products Laboratory (U.S.) Information reviewed and reaffirmed May 1959 and 1965. Report originally published June 1953. Title: The shear, fatigue, bend, impact, and long-time-load strength properties of structural metal-to-metal adhesives in bonds to 24S-T3 aluminum alloy Author: Eickner, Herbert W., Forest Products Laboratory (U.S.) Information reviewed and reaffirmed May 1959 and 1965. Report originally published June 1953. Close

• 40. [Article] Effect of thermal gradients on the strength of phenolic and silicone reinforced plastic laminates

  This report is one of a series issued in cooperation with the ANC-17 panel on plastics for flight vehicles of the departments of the Air Force, Navy, and Commerce.

  Citation × Citation Citation Abstract Copy Title: Effect of thermal gradients on the strength of phenolic and silicone reinforced plastic laminates Author: Forest Products Laboratory (U.S.), Kimball, Kenneth Edmund This report is one of a series issued in cooperation with the ANC-17 panel on plastics for flight vehicles of the departments of the Air Force, Navy, and Commerce. Title: Effect of thermal gradients on the strength of phenolic and silicone reinforced plastic laminates Author: Forest Products Laboratory (U.S.), Kimball, Kenneth Edmund This report is one of a series issued in cooperation with the ANC-17 panel on plastics for flight vehicles of the departments of the Air Force, Navy, and Commerce. Close

• 41. [Article] Effect of infrared heat on 45 degree tensile strength of two reinforced phenolic laminates

  This report issued in cooperation with the Bureau of Naval Weapons, Department of the Navy.

  Citation × Citation Citation Abstract Copy Title: Effect of infrared heat on 45 degree tensile strength of two reinforced phenolic laminates Author: Forest Products Laboratory (U.S.), Boller, Kenneth H. This report issued in cooperation with the Bureau of Naval Weapons, Department of the Navy. Title: Effect of infrared heat on 45 degree tensile strength of two reinforced phenolic laminates Author: Forest Products Laboratory (U.S.), Boller, Kenneth H. This report issued in cooperation with the Bureau of Naval Weapons, Department of the Navy. Close

• 42. [Article] Development of adhesives with improved heat resistance in bonds of stainless steel

  This report issued in cooperation with the Bureau of Naval Weapons, Department of the Navy.

  Citation × Citation Citation Abstract Copy Title: Development of adhesives with improved heat resistance in bonds of stainless steel Author: Forest Products Laboratory (U.S.), Blomquist, Richard Frederick, 1912-, Black, John M. This report issued in cooperation with the Bureau of Naval Weapons, Department of the Navy. Title: Development of adhesives with improved heat resistance in bonds of stainless steel Author: Forest Products Laboratory (U.S.), Blomquist, Richard Frederick, 1912-, Black, John M. This report issued in cooperation with the Bureau of Naval Weapons, Department of the Navy. Close

• 43. [Article] Quality and performance of sliced shook from small ponderosa pine logs

  Information reviewed and reaffirmed 1963 and 1965. Original report issued April 1957.

  Citation × Citation Citation Abstract Copy Title: Quality and performance of sliced shook from small ponderosa pine logs Author: Immelman, W. F. E., Forest Products Laboratory (U.S.) Information reviewed and reaffirmed 1963 and 1965. Original report issued April 1957. Title: Quality and performance of sliced shook from small ponderosa pine logs Author: Immelman, W. F. E., Forest Products Laboratory (U.S.) Information reviewed and reaffirmed 1963 and 1965. Original report issued April 1957. Close

• 44. [Article] Thermal expansion of free films of house paint

  Citation × Citation Citation Abstract Copy Title: Thermal expansion of free films of house paint Author: Forest Products Laboratory (U.S.), Browne, F. L. (Frederick Lincoln), 1895- Title: Thermal expansion of free films of house paint Author: Forest Products Laboratory (U.S.), Browne, F. L. (Frederick Lincoln), 1895- Close

• 45. [Article] Effect of elevated temperatures of the strengths of small specimens of sandwich construction of the aircraft type

  This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on aircraft design criteria under the supervision of the Aircraft Committee of the Munitions Board. Information ...

  Citation × Citation Citation Abstract Copy Title: Effect of elevated temperatures of the strengths of small specimens of sandwich construction of the aircraft type Author: Forest Products Laboratory (U.S.), Kuenzi, Edward W. This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on aircraft design criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed May 1954 and 1962. This report was originally published in August 1949. Title: Effect of elevated temperatures of the strengths of small specimens of sandwich construction of the aircraft type Author: Forest Products Laboratory (U.S.), Kuenzi, Edward W. This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on aircraft design criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed May 1954 and 1962. This report was originally published in August 1949. Close

• 46. [Article] Creep tests of sandwich constructions subjected to shear at normal temperatures

  In cooperation with the U.S. Air Force.Information reviewed and reaffirmed May 1954. This report was originally published in May 1949.

  Citation × Citation Citation Abstract Copy Title: Creep tests of sandwich constructions subjected to shear at normal temperatures Author: Norris, Charles, B. (Charles Brazer), 1894-, Voss, Arnold W., Forest Products Laboratory (U.S.) In cooperation with the U.S. Air Force.Information reviewed and reaffirmed May 1954. This report was originally published in May 1949. Title: Creep tests of sandwich constructions subjected to shear at normal temperatures Author: Norris, Charles, B. (Charles Brazer), 1894-, Voss, Arnold W., Forest Products Laboratory (U.S.) In cooperation with the U.S. Air Force.Information reviewed and reaffirmed May 1954. This report was originally published in May 1949. Close

• 47. [Article] Effect of moisture absorption on flexural properties of a glass-fabric-polyester laminate

  Information reviewed and reaffirmed August 1962. Original report dated October 1950.

  Citation × Citation Citation Abstract Copy Title: Effect of moisture absorption on flexural properties of a glass-fabric-polyester laminate Author: Forest Products Laboratory (U.S.), Boller, Kenneth H. Information reviewed and reaffirmed August 1962. Original report dated October 1950. Title: Effect of moisture absorption on flexural properties of a glass-fabric-polyester laminate Author: Forest Products Laboratory (U.S.), Boller, Kenneth H. Information reviewed and reaffirmed August 1962. Original report dated October 1950. Close

• 48. [Article] Effect of clamp spacing on the quality of glue bond in laminated White Oak timbers glued with an intermediate-temperature-setting phenol-resin glue

  Information reviewed and reaffirmed March 1956

  Citation × Citation Citation Abstract Copy Title: Effect of clamp spacing on the quality of glue bond in laminated White Oak timbers glued with an intermediate-temperature-setting phenol-resin glue Author: Forest Products Laboratory (U.S.), Selbo, M. L. (Magnus Leonard), 1901- Information reviewed and reaffirmed March 1956 Title: Effect of clamp spacing on the quality of glue bond in laminated White Oak timbers glued with an intermediate-temperature-setting phenol-resin glue Author: Forest Products Laboratory (U.S.), Selbo, M. L. (Magnus Leonard), 1901- Information reviewed and reaffirmed March 1956 Close

• 49. [Article] Dimensional stability of glass-cloth-reinforced laminates

  This report is one of a series issued in cooperation with the ANC-17 panel on plastics for aircraft of the departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1962. Original ...

  Citation × Citation Citation Abstract Copy Title: Dimensional stability of glass-cloth-reinforced laminates Author: Heebink, Bruce G., Forest Products Laboratory (U.S.) This report is one of a series issued in cooperation with the ANC-17 panel on plastics for aircraft of the departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1962. Original report issued July 1956. Title: Dimensional stability of glass-cloth-reinforced laminates Author: Heebink, Bruce G., Forest Products Laboratory (U.S.) This report is one of a series issued in cooperation with the ANC-17 panel on plastics for aircraft of the departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1962. Original report issued July 1956. Close

• 50. [Article] Mechanical properties of glass-fabric honeycomb cores

  This report is one of a series issued in cooperation with the ANC-23 panel on sandwich construction for aircraft of the departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed ...

  Citation × Citation Citation Abstract Copy Title: Mechanical properties of glass-fabric honeycomb cores Author: Forest Products Laboratory (U.S.), Kuenzi, Edward W. This report is one of a series issued in cooperation with the ANC-23 panel on sandwich construction for aircraft of the departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1965. Original report issued March 1957. Title: Mechanical properties of glass-fabric honeycomb cores Author: Forest Products Laboratory (U.S.), Kuenzi, Edward W. This report is one of a series issued in cooperation with the ANC-23 panel on sandwich construction for aircraft of the departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1965. Original report issued March 1957. Close