Search

Search Results

• 1. [Article] Reversible Control of the Magnetization of Fe₃O₄ via Lithium Ions

  In this report, a reversible control of Fe₃O₄ saturated magnetization by Li ions is demonstrated. A miniature Li ion battery (LIB) was assembled using a Fe₃O₄ nanoparticle layer as the active cathode. ...

  Citation × Citation Citation Abstract Copy Title: Reversible Control of the Magnetization of Fe₃O₄ via Lithium Ions Author: Wei, Guodong, Wei, Lin, Wang, Dong, Tian, Yufeng, Chen, Yanxue, Yan, Shishen, Mei, Liangmo, Jiao, Jun Year: 2017 In this report, a reversible control of Fe₃O₄ saturated magnetization by Li ions is demonstrated. A miniature Li ion battery (LIB) was assembled using a Fe₃O₄ nanoparticle layer as the active cathode. A stable magnetism modulation is realized by a nondestructive electrochemical process in which the lithium insertion results in a valence change and partial redistribution of Fe cations in the crystal structure. The relation between the discharge voltage and the chemical phases were studied by ex situ X-ray diffraction and magnetic measurement. In a suitable discharge potential range, a reversible control of Fe₃O₄ saturated magnetization was obtained without structural damage to the magnetic electrode. The experimental results indicate by further optimizing the LIB's performance, a large reversible change in magnetization could be realized at room temperature, suggesting the potential for future practical applications. Title: Reversible Control of the Magnetization of Fe₃O₄ via Lithium Ions Author: Wei, Guodong, Wei, Lin, Wang, Dong, Tian, Yufeng, Chen, Yanxue, Yan, Shishen, Mei, Liangmo, Jiao, Jun Year: 2017 In this report, a reversible control of Fe₃O₄ saturated magnetization by Li ions is demonstrated. A miniature Li ion battery (LIB) was assembled using a Fe₃O₄ nanoparticle layer as the active cathode. A stable magnetism modulation is realized by a nondestructive electrochemical process in which the lithium insertion results in a valence change and partial redistribution of Fe cations in the crystal structure. The relation between the discharge voltage and the chemical phases were studied by ex situ X-ray diffraction and magnetic measurement. In a suitable discharge potential range, a reversible control of Fe₃O₄ saturated magnetization was obtained without structural damage to the magnetic electrode. The experimental results indicate by further optimizing the LIB's performance, a large reversible change in magnetization could be realized at room temperature, suggesting the potential for future practical applications. Close

• 2. [Article] ZnO Nanosheet Arrays Constructed on Weaved Titanium Wire for CdS-Sensitized Solar Cells

  Ordered ZnO nanosheet arrays were grown on weaved titanium wires by a low-temperature hydrothermal method. CdS nanoparticles were deposited onto the ZnO nanosheet arrays using the successive ionic layer ...

  Citation × Citation Citation Abstract Copy Title: ZnO Nanosheet Arrays Constructed on Weaved Titanium Wire for CdS-Sensitized Solar Cells Author: Wu, Cuncun, Wei, Lin, Li, Yitan, Liu, Chang, Jiao, Jun, Chen, Yanxue, Mei, Liangmo Year: 2014 Ordered ZnO nanosheet arrays were grown on weaved titanium wires by a low-temperature hydrothermal method. CdS nanoparticles were deposited onto the ZnO nanosheet arrays using the successive ionic layer adsorption and reaction method to make a photoanode. Nanoparticle-sensitized solar cells were assembled using these CdS/ZnO nanostructured photoanodes, and their photovoltaic performance was studied systematically. The best light-to-electricity conversion efficiency was obtained to be 2.17% under 100 mW/cm/cm2 illumination, and a remarkable shortcircuit photocurrent density of approximately 20.1 mA/cm2 was recorded, which could attribute to the relatively direct pathways for transportation of electrons provided by ZnO nanosheet arrays as well as the direct contact between ZnO and weaved titanium wires. These results indicate that CdS/ZnO nanostructures on weaved titanium wires would open a novel possibility for applications of low-cost solar cells. Title: ZnO Nanosheet Arrays Constructed on Weaved Titanium Wire for CdS-Sensitized Solar Cells Author: Wu, Cuncun, Wei, Lin, Li, Yitan, Liu, Chang, Jiao, Jun, Chen, Yanxue, Mei, Liangmo Year: 2014 Ordered ZnO nanosheet arrays were grown on weaved titanium wires by a low-temperature hydrothermal method. CdS nanoparticles were deposited onto the ZnO nanosheet arrays using the successive ionic layer adsorption and reaction method to make a photoanode. Nanoparticle-sensitized solar cells were assembled using these CdS/ZnO nanostructured photoanodes, and their photovoltaic performance was studied systematically. The best light-to-electricity conversion efficiency was obtained to be 2.17% under 100 mW/cm/cm2 illumination, and a remarkable shortcircuit photocurrent density of approximately 20.1 mA/cm2 was recorded, which could attribute to the relatively direct pathways for transportation of electrons provided by ZnO nanosheet arrays as well as the direct contact between ZnO and weaved titanium wires. These results indicate that CdS/ZnO nanostructures on weaved titanium wires would open a novel possibility for applications of low-cost solar cells. Close

• 3. [Article] CdS Quantum Dot-Sensitized Solar Cells Based on Nano-Branched TiO2 Arrays

  Nano-branched rutile TiO2 nanorod arrays were grown on F:SnO2 conductive glass (FTO) by a facile, two-step wet chemical synthesis process at low temperature. The length of the nanobranches was tailored ...

  Citation × Citation Citation Abstract Copy Title: CdS Quantum Dot-Sensitized Solar Cells Based on Nano-Branched TiO2 Arrays Author: Liu, Chang, Li, Yitan, Wei, Lin, Wu, Cuncun, Chen, Yanxue, Mei, Liangmo, Jiao, Jun Year: 2014 Nano-branched rutile TiO2 nanorod arrays were grown on F:SnO2 conductive glass (FTO) by a facile, two-step wet chemical synthesis process at low temperature. The length of the nanobranches was tailored by controlling the growth time, after which CdS quantum dots were deposited on the nano-branched TiO2 arrays using the successive ionic layer adsorption and reaction method to make a photoanode for quantum dot-sensitized solar cells (QDSCs). The photovoltaic properties of the CdS-sensitized nano-branched TiO2 solar cells were studied systematically. A short-circuit current intensity of approximately 7 mA/cm2 and a light-to-electricity conversion efficiency of 0.95% were recorded for cells based on optimized nano-branched TiO2 arrays, indicating an increase of 138% compared to those based on unbranched TiO2 nanorod arrays. The improved performance is attributed to a markedly enlarged surface area provided by the nanobranches and better electron conductivity in the one-dimensional, well-aligned TiO2 nanorod trunks Title: CdS Quantum Dot-Sensitized Solar Cells Based on Nano-Branched TiO2 Arrays Author: Liu, Chang, Li, Yitan, Wei, Lin, Wu, Cuncun, Chen, Yanxue, Mei, Liangmo, Jiao, Jun Year: 2014 Nano-branched rutile TiO2 nanorod arrays were grown on F:SnO2 conductive glass (FTO) by a facile, two-step wet chemical synthesis process at low temperature. The length of the nanobranches was tailored by controlling the growth time, after which CdS quantum dots were deposited on the nano-branched TiO2 arrays using the successive ionic layer adsorption and reaction method to make a photoanode for quantum dot-sensitized solar cells (QDSCs). The photovoltaic properties of the CdS-sensitized nano-branched TiO2 solar cells were studied systematically. A short-circuit current intensity of approximately 7 mA/cm2 and a light-to-electricity conversion efficiency of 0.95% were recorded for cells based on optimized nano-branched TiO2 arrays, indicating an increase of 138% compared to those based on unbranched TiO2 nanorod arrays. The improved performance is attributed to a markedly enlarged surface area provided by the nanobranches and better electron conductivity in the one-dimensional, well-aligned TiO2 nanorod trunks Close