Search

Search Results

• 1. [Article] Upper Spokane River Model: Boundary Conditions and Model Setup, 2001

  The Washington Department of Ecology is interested in a water quality model for the Upper Spokane River system for use in developing Total Maximum Daily Loads (TMDLs). The goals of this modeling effort ...

  Citation × Citation Citation Abstract Copy Title: Upper Spokane River Model: Boundary Conditions and Model Setup, 2001 Author: Slominski, Spencer, Annear, Robert Leslie, Berger, Chris, Wells, Scott A. Year: 2002 The Washington Department of Ecology is interested in a water quality model for the Upper Spokane River system for use in developing Total Maximum Daily Loads (TMDLs). The goals of this modeling effort are to: • Gather data to construct a computer simulation model of the Spokane River system including Long Lake Reservoir and the pools behind Nine Mile dam, Upper Falls dam and Upriver dam for 2001 based on the calibration conducted for 1991 and 2000 data sets, (Annear et al, 2001). • Ensure that the model accurately represents the system hydrodynamics and water quality (flow, temperature, dissolved oxygen and nutrient dynamics) for the three simulation years A hydrodynamic and water quality model, CE-QUAL-W2 Version 3 (Wells, 1997), is being applied to model the Spokane River system. CE-QUAL-W2 is a two dimensional (longitudinal-vertical), laterally averaged, hydrodynamic and water quality model that has been under development by the Corps of Engineers Waterways Experiment Station (Cole and Wells, 2000). In order to model the system, the following data were required: • Spokane River flow, water level and water quality data at the upstream system boundary (the State of Idaho boundary) • Tributary inflows and water quality • Meteorological conditions • Bathymetry of the Spokane River, the dam pools along the river, and Long Lake Reservoir • Point source (wastewater treatment plants, WWTPs) inflows and water quality characteristics Data have been primarily collected from 1991 to 1992, during 2000, and more recently during 2001. This report summarizes the 2001 data used in the modeling effort to expand the model calibration period. Title: Upper Spokane River Model: Boundary Conditions and Model Setup, 2001 Author: Slominski, Spencer, Annear, Robert Leslie, Berger, Chris, Wells, Scott A. Year: 2002 The Washington Department of Ecology is interested in a water quality model for the Upper Spokane River system for use in developing Total Maximum Daily Loads (TMDLs). The goals of this modeling effort are to: • Gather data to construct a computer simulation model of the Spokane River system including Long Lake Reservoir and the pools behind Nine Mile dam, Upper Falls dam and Upriver dam for 2001 based on the calibration conducted for 1991 and 2000 data sets, (Annear et al, 2001). • Ensure that the model accurately represents the system hydrodynamics and water quality (flow, temperature, dissolved oxygen and nutrient dynamics) for the three simulation years A hydrodynamic and water quality model, CE-QUAL-W2 Version 3 (Wells, 1997), is being applied to model the Spokane River system. CE-QUAL-W2 is a two dimensional (longitudinal-vertical), laterally averaged, hydrodynamic and water quality model that has been under development by the Corps of Engineers Waterways Experiment Station (Cole and Wells, 2000). In order to model the system, the following data were required: • Spokane River flow, water level and water quality data at the upstream system boundary (the State of Idaho boundary) • Tributary inflows and water quality • Meteorological conditions • Bathymetry of the Spokane River, the dam pools along the river, and Long Lake Reservoir • Point source (wastewater treatment plants, WWTPs) inflows and water quality characteristics Data have been primarily collected from 1991 to 1992, during 2000, and more recently during 2001. This report summarizes the 2001 data used in the modeling effort to expand the model calibration period. Close

• 2. [Article] Upper Spokane River Model: Boundary Conditions and Model Setup, 1991 and 2000

  The Washington Department of Ecology is interested in a water quality model for the Upper Spokane River system for use in developing Total Maximum Daily Loads (TMDLs). The goals of this modeling effort ...

  Citation × Citation Citation Abstract Copy Title: Upper Spokane River Model: Boundary Conditions and Model Setup, 1991 and 2000 Author: Annear, Robert Leslie, Berger, Chris, Wells, Scott A. Year: 2001 The Washington Department of Ecology is interested in a water quality model for the Upper Spokane River system for use in developing Total Maximum Daily Loads (TMDLs). The goals of this modeling effort are to: • Gather data to construct a computer simulation model of the Spokane River system including Long Lake Reservoir and the pools behind Nine Mile dam, Upper Falls dam and Upriver dam • Ensure that the model accurately represents the system hydrodynamics and water quality (flow, temperature, dissolved oxygen and nutrient dynamics) A hydrodynamic and water quality model, CE-QUAL-W2 Version 3 (Wells, 1997), is being applied to model the Spokane River system. CE-QUAL-W2 is a two dimensional (longitudinal-vertical), laterally averaged, hydrodynamic and water quality model that has been under development by the Corps of Engineers Waterways Experiments Station (Cole and Wells, 2000). In order to model the system, the following data were required: • Spokane River flow, water level and water quality data at the upstream system boundary (the State of Idaho boundary) • Tributary inflows and water quality • Meteorological conditions • Bathymetry of the Spokane River, the dam pools along the river, and Long Lake Reservoir • Point source (wastewater treatment plants, WWTPs) inflows and water quality characteristics Data have been primarily collected from 1991 to 1992 and again during 2000. This report summarizes the data used in the modeling effort. Title: Upper Spokane River Model: Boundary Conditions and Model Setup, 1991 and 2000 Author: Annear, Robert Leslie, Berger, Chris, Wells, Scott A. Year: 2001 The Washington Department of Ecology is interested in a water quality model for the Upper Spokane River system for use in developing Total Maximum Daily Loads (TMDLs). The goals of this modeling effort are to: • Gather data to construct a computer simulation model of the Spokane River system including Long Lake Reservoir and the pools behind Nine Mile dam, Upper Falls dam and Upriver dam • Ensure that the model accurately represents the system hydrodynamics and water quality (flow, temperature, dissolved oxygen and nutrient dynamics) A hydrodynamic and water quality model, CE-QUAL-W2 Version 3 (Wells, 1997), is being applied to model the Spokane River system. CE-QUAL-W2 is a two dimensional (longitudinal-vertical), laterally averaged, hydrodynamic and water quality model that has been under development by the Corps of Engineers Waterways Experiments Station (Cole and Wells, 2000). In order to model the system, the following data were required: • Spokane River flow, water level and water quality data at the upstream system boundary (the State of Idaho boundary) • Tributary inflows and water quality • Meteorological conditions • Bathymetry of the Spokane River, the dam pools along the river, and Long Lake Reservoir • Point source (wastewater treatment plants, WWTPs) inflows and water quality characteristics Data have been primarily collected from 1991 to 1992 and again during 2000. This report summarizes the data used in the modeling effort. Close

• 3. [Article] Upper Spokane River Model: Model Calibration, 1991 and 2000

  The Washington Department of Ecology is interested in a water quality model for the Upper Spokane River system for use in developing Total Maximum Daily Loads (TMDLs). The goals of this modeling effort ...

  Citation × Citation Citation Abstract Copy Title: Upper Spokane River Model: Model Calibration, 1991 and 2000 Author: Berger, Chris, Annear, Robert Leslie, Wells, Scott A. Year: 2002 The Washington Department of Ecology is interested in a water quality model for the Upper Spokane River system for use in developing Total Maximum Daily Loads (TMDLs). The goals of this modeling effort are to: • Gather data to construct a computer simulation model of the Spokane River system including Long Lake Reservoir and the pools behind Nine Mile dam, Upper Falls dam and Upriver dam. • Ensure that the model accurately represents the system hydrodynamics and water quality (flow, temperature, dissolved oxygen and nutrient dynamics) This report evaluates the model calibration and discusses issues relative to that calibration effort. The calibration effort focused on model predictions of hydrodynamics (flow and water level), temperature, and eutrophication model parameters (such as nutrients, algae, dissolved oxygen, organic matter, coliform). The model calibration periods were from February 1, 1991 to October 31, 1991 and from January 1, 2000 to October 31, 2000. Title: Upper Spokane River Model: Model Calibration, 1991 and 2000 Author: Berger, Chris, Annear, Robert Leslie, Wells, Scott A. Year: 2002 The Washington Department of Ecology is interested in a water quality model for the Upper Spokane River system for use in developing Total Maximum Daily Loads (TMDLs). The goals of this modeling effort are to: • Gather data to construct a computer simulation model of the Spokane River system including Long Lake Reservoir and the pools behind Nine Mile dam, Upper Falls dam and Upriver dam. • Ensure that the model accurately represents the system hydrodynamics and water quality (flow, temperature, dissolved oxygen and nutrient dynamics) This report evaluates the model calibration and discusses issues relative to that calibration effort. The calibration effort focused on model predictions of hydrodynamics (flow and water level), temperature, and eutrophication model parameters (such as nutrients, algae, dissolved oxygen, organic matter, coliform). The model calibration periods were from February 1, 1991 to October 31, 1991 and from January 1, 2000 to October 31, 2000. Close

• 4. [Article] Idaho Pend Oreille River Model: Model Development and Calibration

  The objectives of this project were to: • Develop a hydrodynamic and temperature model of Pend Oreille River using CE-QUAL-W2 Version 3.2 • Calibrate the CE-QUAL-W2 model to field data collected during ...

  Citation × Citation Citation Abstract Copy Title: Idaho Pend Oreille River Model: Model Development and Calibration Author: Annear, Robert Leslie, Berger, Chris, Wells, Scott A. Year: 2006 The objectives of this project were to: • Develop a hydrodynamic and temperature model of Pend Oreille River using CE-QUAL-W2 Version 3.2 • Calibrate the CE-QUAL-W2 model to field data collected during 2004 and 2005 using the following water quality variables: flow, water surface elevation, and velocity temperature o dissolved oxygen nutrients (NO3-N+NO2-N, NH4-N, PO4-P) algae – chlorophyll a BOD5 and dissolved organic matter and particulate organic matter compartments (both labile and refractory) for the organic matter cycling with algae periphyton The model chosen for development was CE-QUAL-W2 Version 3.2 (Cole and Wells, 2004). This is a two-dimensional unsteady hydrodynamic and water quality model that includes typical eutrophication constituents (algae, nutrients, temperature, organic matter, dissolved oxygen, pH). Portland State University’s Water Quality Research Group is a center for development of this modeling tool (see http://www.cee.pdx.edu/w2). The model simulation was run from January 1st, 2004 to September 25th, 2005. The calibration period focused on the summers during each year when water quality data were obtained. Title: Idaho Pend Oreille River Model: Model Development and Calibration Author: Annear, Robert Leslie, Berger, Chris, Wells, Scott A. Year: 2006 The objectives of this project were to: • Develop a hydrodynamic and temperature model of Pend Oreille River using CE-QUAL-W2 Version 3.2 • Calibrate the CE-QUAL-W2 model to field data collected during 2004 and 2005 using the following water quality variables: flow, water surface elevation, and velocity temperature o dissolved oxygen nutrients (NO3-N+NO2-N, NH4-N, PO4-P) algae – chlorophyll a BOD5 and dissolved organic matter and particulate organic matter compartments (both labile and refractory) for the organic matter cycling with algae periphyton The model chosen for development was CE-QUAL-W2 Version 3.2 (Cole and Wells, 2004). This is a two-dimensional unsteady hydrodynamic and water quality model that includes typical eutrophication constituents (algae, nutrients, temperature, organic matter, dissolved oxygen, pH). Portland State University’s Water Quality Research Group is a center for development of this modeling tool (see http://www.cee.pdx.edu/w2). The model simulation was run from January 1st, 2004 to September 25th, 2005. The calibration period focused on the summers during each year when water quality data were obtained. Close

• 5. [Article] Lower Willamette River Model: Model Calibration

  Water Environment Services of Clackamas County is in the process of planning upgrades on several of its wastewater treatment plants (WWTPs) which discharge into the Lower Willamette River. The goals of ...

  Citation × Citation Citation Abstract Copy Title: Lower Willamette River Model: Model Calibration Author: Berger, Chris, Annear, Robert Leslie, Wells, Scott A. Year: 2001 Water Environment Services of Clackamas County is in the process of planning upgrades on several of its wastewater treatment plants (WWTPs) which discharge into the Lower Willamette River. The goals of the modeling effort were to: • Gather data to construct a computer simulation model of the Lower Willamette River system in order to evaluate the impact of the WWTP discharges on water quality • Ensure that the model accurately represents the system physics and chemistry (flow, temperature, dissolved oxygen and nutrient dynamics) by model calibration • Use the model to evaluate how to meet various future discharge scenarios for Water Environment Services of Clackamas County. This report evaluates the model calibration and discusses issues relative to that calibration effort. The calibration effort focused on model predictions of hydrodynamics (flow and water level), temperature, and eutrophication model parameters (such as nutrients, algae, dissolved oxygen, organic matter, coliform). Title: Lower Willamette River Model: Model Calibration Author: Berger, Chris, Annear, Robert Leslie, Wells, Scott A. Year: 2001 Water Environment Services of Clackamas County is in the process of planning upgrades on several of its wastewater treatment plants (WWTPs) which discharge into the Lower Willamette River. The goals of the modeling effort were to: • Gather data to construct a computer simulation model of the Lower Willamette River system in order to evaluate the impact of the WWTP discharges on water quality • Ensure that the model accurately represents the system physics and chemistry (flow, temperature, dissolved oxygen and nutrient dynamics) by model calibration • Use the model to evaluate how to meet various future discharge scenarios for Water Environment Services of Clackamas County. This report evaluates the model calibration and discusses issues relative to that calibration effort. The calibration effort focused on model predictions of hydrodynamics (flow and water level), temperature, and eutrophication model parameters (such as nutrients, algae, dissolved oxygen, organic matter, coliform). Close

• 6. [Article] Lower Willamette River Model: Boundary Conditions and Model Setup

  Water Environment Services of Clackamas County is in the process of planning upgrades on several of its sewage treatment plants which discharge into the Lower Willamette River. The goals of the modeling ...

  Citation × Citation Citation Abstract Copy Title: Lower Willamette River Model: Boundary Conditions and Model Setup Author: Rodriguez, Herman G., Annear, Robert Leslie, Wells, Scott A., Berger, Chris Year: 2001 Water Environment Services of Clackamas County is in the process of planning upgrades on several of its sewage treatment plants which discharge into the Lower Willamette River. The goals of the modeling effort are to: • Gather data to construct a computer simulation model of the Lower Willamette River system including part of the Lower Columbia River and the Willamette River above the Oregon City Falls; Because of the tidal influence in the Lower Willamette River, portions of the Columbia River that might affect the Lower Willamette River water quality were also modeled. Also, a section of the Willamette River above the head of tide, the Oregon City Falls, was modeled because of the lack of good boundary condition data at the Falls. • Ensure that the model accurately represents the system physics and chemistry (flow, temperature, dissolved oxygen and nutrient dynamics); • Use the model to evaluate how to meet various future discharge scenarios for the sewage district. A hydrodynamic and water quality model, CE-QUAL-W2 Version 3 (Wells, 1997), is being applied to model the Willamette-Columbia system. CE-QUAL-W2 is a two dimensional (longitudinal-vertical), laterally averaged, hydrodynamic and water quality model that has been under development by the Corps of Engineers Waterways Experiments Station (Cole and Wells, 2000). In order to model the system, the following data were required: • Willamette and Columbia River flow, water level and water quality data • Tributary inflows and water quality • Meteorological conditions • Bathymetry of the Columbia and Willamette Rivers and several side channels • Point source inflows and water quality characteristics Many local, state and federal agencies have been collecting data in the Lower Willamette and Columbia Rivers. This report summarizes data used in the modeling effort. Title: Lower Willamette River Model: Boundary Conditions and Model Setup Author: Rodriguez, Herman G., Annear, Robert Leslie, Wells, Scott A., Berger, Chris Year: 2001 Water Environment Services of Clackamas County is in the process of planning upgrades on several of its sewage treatment plants which discharge into the Lower Willamette River. The goals of the modeling effort are to: • Gather data to construct a computer simulation model of the Lower Willamette River system including part of the Lower Columbia River and the Willamette River above the Oregon City Falls; Because of the tidal influence in the Lower Willamette River, portions of the Columbia River that might affect the Lower Willamette River water quality were also modeled. Also, a section of the Willamette River above the head of tide, the Oregon City Falls, was modeled because of the lack of good boundary condition data at the Falls. • Ensure that the model accurately represents the system physics and chemistry (flow, temperature, dissolved oxygen and nutrient dynamics); • Use the model to evaluate how to meet various future discharge scenarios for the sewage district. A hydrodynamic and water quality model, CE-QUAL-W2 Version 3 (Wells, 1997), is being applied to model the Willamette-Columbia system. CE-QUAL-W2 is a two dimensional (longitudinal-vertical), laterally averaged, hydrodynamic and water quality model that has been under development by the Corps of Engineers Waterways Experiments Station (Cole and Wells, 2000). In order to model the system, the following data were required: • Willamette and Columbia River flow, water level and water quality data • Tributary inflows and water quality • Meteorological conditions • Bathymetry of the Columbia and Willamette Rivers and several side channels • Point source inflows and water quality characteristics Many local, state and federal agencies have been collecting data in the Lower Willamette and Columbia Rivers. This report summarizes data used in the modeling effort. Close

• 7. [Article] Modeling Macrophytes of the Columbia Slough, Oregon

  The Columbia Slough is a tidally influenced freshwater system of wetlands, channels, and lakes located within the Portland, Oregon metropolitan area at the confluence of the Willamette and Columbia Rivers. ...

  Citation × Citation Citation Abstract Copy Title: Modeling Macrophytes of the Columbia Slough, Oregon Author: Berger, Chris, Wells, Scott A. Year: 1999 The Columbia Slough is a tidally influenced freshwater system of wetlands, channels, and lakes located within the Portland, Oregon metropolitan area at the confluence of the Willamette and Columbia Rivers. It is a eutrophic water body susceptible to algae blooms and crashes and periods of high pH which violate water quality standards. High nutrient loads from groundwater principally controls algae productivity. Past structural changes to the Columbia Slough have included filling of wetlands and lakes and the construction of levees, dikes, culverts and irrigation channels. These changes have altered the natural flow dynamics creating an environment more conducive to eutrophication. A hydrodynamic and water quality model was used to evaluate management alternatives to improve water quality in the system. The model was developed using the Corps of Engineers two-dimensional, laterally averaged, dynamic water quality model, CE-QUAL-W2. CE-QUAL-W2 consists of directly coupled hydrodynamic and water quality transport. Recently, a management strategy of flow augmentation using groundwater coupled with shorter in-pool detention times has reduced algae growth. However, the resulting increase in water clarity has created an environment favorable to the growth of aquatic plants. The aquatic plants, or macrophytes, have increased water levels and detention time by increasing channel friction and blockage. Accurate predictions of hydrodynamics were essential for evaluating the water quality impact of flow management strategies. Macrophytes and epiphyton affect nutrient cycling by removing nutrients from the water column and sediment. To help evaluate the study of new management alternatives, the Columbia Slough model was expanded to simulate the water quality and hydrodynamic effects of macrophytes and epiphyton. Title: Modeling Macrophytes of the Columbia Slough, Oregon Author: Berger, Chris, Wells, Scott A. Year: 1999 The Columbia Slough is a tidally influenced freshwater system of wetlands, channels, and lakes located within the Portland, Oregon metropolitan area at the confluence of the Willamette and Columbia Rivers. It is a eutrophic water body susceptible to algae blooms and crashes and periods of high pH which violate water quality standards. High nutrient loads from groundwater principally controls algae productivity. Past structural changes to the Columbia Slough have included filling of wetlands and lakes and the construction of levees, dikes, culverts and irrigation channels. These changes have altered the natural flow dynamics creating an environment more conducive to eutrophication. A hydrodynamic and water quality model was used to evaluate management alternatives to improve water quality in the system. The model was developed using the Corps of Engineers two-dimensional, laterally averaged, dynamic water quality model, CE-QUAL-W2. CE-QUAL-W2 consists of directly coupled hydrodynamic and water quality transport. Recently, a management strategy of flow augmentation using groundwater coupled with shorter in-pool detention times has reduced algae growth. However, the resulting increase in water clarity has created an environment favorable to the growth of aquatic plants. The aquatic plants, or macrophytes, have increased water levels and detention time by increasing channel friction and blockage. Accurate predictions of hydrodynamics were essential for evaluating the water quality impact of flow management strategies. Macrophytes and epiphyton affect nutrient cycling by removing nutrients from the water column and sediment. To help evaluate the study of new management alternatives, the Columbia Slough model was expanded to simulate the water quality and hydrodynamic effects of macrophytes and epiphyton. Close

• 8. [Article] Upper Spokane River Model in Idaho: Boundary Conditions and Model Setup for 2001

  The Spokane River in Idaho originates in Coeur d’Alene Lake (Figure 1 and Figure 2). The section of the Spokane River from Coeur d’Alene Lake to the Washington state line is the subject of a water quality ...

  Citation × Citation Citation Abstract Copy Title: Upper Spokane River Model in Idaho: Boundary Conditions and Model Setup for 2001 Author: Wells, Scott A., Annear, Robert Leslie, Berger, Chris Year: 2003 The Spokane River in Idaho originates in Coeur d’Alene Lake (Figure 1 and Figure 2). The section of the Spokane River from Coeur d’Alene Lake to the Washington state line is the subject of a water quality study for the US Environmental Protection Agency. The objective of this study is to create a water quality and hydrodynamic model of the Spokane River in Idaho using CE-QUAL-W2 Version 3.1 (Cole and Wells, 2002). Since the Spokane River is water quality limited, a hydrodynamic and water quality model for the Spokane River in Washington was developed by Portland State University for the Corps of Engineers and the Washington Department of Ecology from the Idaho border to the outlet of Long Lake. An earlier study of the Spokane River was undertaken by Limno-Tech (2001a, 2001b) for the domain shown in Figure 3. Limno-Tech used an earlier version of CE-QUAL-W2, Version 2, for the Reservoir portion of the Spokane River from Post Falls Dam to Coeur d’Alene Lake and a steady-state EPA model, QUAL2E, for the riverine section from Post Falls Dam to the Idaho-Washington border. The steady-state QUAL2E model was not adequate to deal with flow and water quality dynamics. Hence, the riverine portion of the model and the reservoir portion were both upgraded to CE-QUAL-W2 Version 3.1. Because of the necessity of looking at the entire water basin, a model using CE-QUAL-W2 Version 3.1 of the Idaho portion of the Spokane River model was developed to assess water quality management strategies for the Idaho side of the Spokane River. Title: Upper Spokane River Model in Idaho: Boundary Conditions and Model Setup for 2001 Author: Wells, Scott A., Annear, Robert Leslie, Berger, Chris Year: 2003 The Spokane River in Idaho originates in Coeur d’Alene Lake (Figure 1 and Figure 2). The section of the Spokane River from Coeur d’Alene Lake to the Washington state line is the subject of a water quality study for the US Environmental Protection Agency. The objective of this study is to create a water quality and hydrodynamic model of the Spokane River in Idaho using CE-QUAL-W2 Version 3.1 (Cole and Wells, 2002). Since the Spokane River is water quality limited, a hydrodynamic and water quality model for the Spokane River in Washington was developed by Portland State University for the Corps of Engineers and the Washington Department of Ecology from the Idaho border to the outlet of Long Lake. An earlier study of the Spokane River was undertaken by Limno-Tech (2001a, 2001b) for the domain shown in Figure 3. Limno-Tech used an earlier version of CE-QUAL-W2, Version 2, for the Reservoir portion of the Spokane River from Post Falls Dam to Coeur d’Alene Lake and a steady-state EPA model, QUAL2E, for the riverine section from Post Falls Dam to the Idaho-Washington border. The steady-state QUAL2E model was not adequate to deal with flow and water quality dynamics. Hence, the riverine portion of the model and the reservoir portion were both upgraded to CE-QUAL-W2 Version 3.1. Because of the necessity of looking at the entire water basin, a model using CE-QUAL-W2 Version 3.1 of the Idaho portion of the Spokane River model was developed to assess water quality management strategies for the Idaho side of the Spokane River. Close

• 9. [Article] Upper Spokane River Model: Model Calibration, 2001

  The Upper Spokane River system under consideration is located in the Northeastern part of Washington State and runs from the Stateline with Idaho, River mile (RM) 96.0, downstream to Long Lake dam at RM ...

  Citation × Citation Citation Abstract Copy Title: Upper Spokane River Model: Model Calibration, 2001 Author: Berger, Chris, Annear, Robert Leslie, Welle, Benjamin Year: 2003 The Upper Spokane River system under consideration is located in the Northeastern part of Washington State and runs from the Stateline with Idaho, River mile (RM) 96.0, downstream to Long Lake dam at RM 32.5. Figure 1 shows the river system and an outline the boundaries of the City of Spokane. The Washington Department of Ecology (Ecology) is interested in a water quality model for the Upper Spokane River system for use in developing Total Maximum Daily Loads (TMDLs). As a result, Ecology and the Corps of Engineers funded a study to develop a water quality and hydrodynamic model of the Spokane River system for the years 1991 and 2000. Since the City of Spokane and other point dischargers to the Spokane River have taken considerable field data in the Spokane River system during 2001, the City of Spokane funded this study primarily to: • Continue the development of the Spokane River model for the year 2001, and • Ensure that the model retains its calibration for the year 2001 A hydrodynamic and water quality model, CE-QUAL-W2 Version 3 (Wells, 1997), was applied to the Spokane River system for the years 1991 and 2000. CE-QUAL-W2 is a two dimensional (longitudinalvertical), laterally averaged, hydrodynamic and water quality model that has been under development by the Corps of Engineers Waterways Experiments Station (Cole and Wells, 2000). This report evaluates the 2001 model calibration and discusses issues relative to that calibration effort. The calibration effort focused on model predictions of hydrodynamics (flow and water level), temperature, and eutrophication model parameters (such as nutrients, algae, dissolved oxygen, organic matter, coliform). The model calibration period was from March 15, 2001 to October 31, 2001. Title: Upper Spokane River Model: Model Calibration, 2001 Author: Berger, Chris, Annear, Robert Leslie, Welle, Benjamin Year: 2003 The Upper Spokane River system under consideration is located in the Northeastern part of Washington State and runs from the Stateline with Idaho, River mile (RM) 96.0, downstream to Long Lake dam at RM 32.5. Figure 1 shows the river system and an outline the boundaries of the City of Spokane. The Washington Department of Ecology (Ecology) is interested in a water quality model for the Upper Spokane River system for use in developing Total Maximum Daily Loads (TMDLs). As a result, Ecology and the Corps of Engineers funded a study to develop a water quality and hydrodynamic model of the Spokane River system for the years 1991 and 2000. Since the City of Spokane and other point dischargers to the Spokane River have taken considerable field data in the Spokane River system during 2001, the City of Spokane funded this study primarily to: • Continue the development of the Spokane River model for the year 2001, and • Ensure that the model retains its calibration for the year 2001 A hydrodynamic and water quality model, CE-QUAL-W2 Version 3 (Wells, 1997), was applied to the Spokane River system for the years 1991 and 2000. CE-QUAL-W2 is a two dimensional (longitudinalvertical), laterally averaged, hydrodynamic and water quality model that has been under development by the Corps of Engineers Waterways Experiments Station (Cole and Wells, 2000). This report evaluates the 2001 model calibration and discusses issues relative to that calibration effort. The calibration effort focused on model predictions of hydrodynamics (flow and water level), temperature, and eutrophication model parameters (such as nutrients, algae, dissolved oxygen, organic matter, coliform). The model calibration period was from March 15, 2001 to October 31, 2001. Close

• 10. [Article] Upper Spokane River Model in Idaho: Boundary Conditions and Model Setup and Calibration for 2001 and 2004

  As a result of a Total Maximum Daily Load (TMDL) study of the Spokane River in Washington, a hydrodynamic and water quality model for the Spokane River was developed by Portland State University (PSU) ...

  Citation × Citation Citation Abstract Copy Title: Upper Spokane River Model in Idaho: Boundary Conditions and Model Setup and Calibration for 2001 and 2004 Author: Annear, Robert Leslie, Wells, Scott A., Berger, Chris Year: 2005 As a result of a Total Maximum Daily Load (TMDL) study of the Spokane River in Washington, a hydrodynamic and water quality model for the Spokane River was developed by Portland State University (PSU) for the Corps of Engineers and the Washington Department of Ecology from the Washington-Idaho state line to the outlet of Long Lake. An earlier study of the Spokane River was undertaken by Limno-Tech (2001a, 2001b) for the domain shown in Figure 3. Limno-Tech used an earlier version of CE-QUAL-W2, Version 2, for the Reservoir portion of the Spokane River from Post Falls Dam to Coeur d’Alene Lake and a steady-state EPA model, QUAL2E, for the riverine section from Post Falls Dam to the Idaho-Washington State Line. The steady-state QUAL2E model was not adequate to deal with flow and water quality dynamics. Hence, the riverine portion of the model and the reservoir portion were both upgraded to CE-QUAL-W2 Version 3.1. PSU developed the CE-QUAL-W2 model, but did not have adequate data for model calibration. The set-up of this model was described in the following report: * Wells et al. (2003) - Upper Spokane River Model in Idaho: Boundary Conditions and Model Setup for 2001 Because of the necessity of looking at the entire river basin, a model using CE-QUAL-W2 Version 3.1 of the Idaho portion of the Spokane River model was developed to assess water quality management strategies for the Idaho side of the Spokane River. The objective of this study was to use new field data from 2001 and 2004 to improve the model calibration for the Idaho portion of the Spokane River and reevaluate the work done by Wells et al. (2003). Title: Upper Spokane River Model in Idaho: Boundary Conditions and Model Setup and Calibration for 2001 and 2004 Author: Annear, Robert Leslie, Wells, Scott A., Berger, Chris Year: 2005 As a result of a Total Maximum Daily Load (TMDL) study of the Spokane River in Washington, a hydrodynamic and water quality model for the Spokane River was developed by Portland State University (PSU) for the Corps of Engineers and the Washington Department of Ecology from the Washington-Idaho state line to the outlet of Long Lake. An earlier study of the Spokane River was undertaken by Limno-Tech (2001a, 2001b) for the domain shown in Figure 3. Limno-Tech used an earlier version of CE-QUAL-W2, Version 2, for the Reservoir portion of the Spokane River from Post Falls Dam to Coeur d’Alene Lake and a steady-state EPA model, QUAL2E, for the riverine section from Post Falls Dam to the Idaho-Washington State Line. The steady-state QUAL2E model was not adequate to deal with flow and water quality dynamics. Hence, the riverine portion of the model and the reservoir portion were both upgraded to CE-QUAL-W2 Version 3.1. PSU developed the CE-QUAL-W2 model, but did not have adequate data for model calibration. The set-up of this model was described in the following report: * Wells et al. (2003) - Upper Spokane River Model in Idaho: Boundary Conditions and Model Setup for 2001 Because of the necessity of looking at the entire river basin, a model using CE-QUAL-W2 Version 3.1 of the Idaho portion of the Spokane River model was developed to assess water quality management strategies for the Idaho side of the Spokane River. The objective of this study was to use new field data from 2001 and 2004 to improve the model calibration for the Idaho portion of the Spokane River and reevaluate the work done by Wells et al. (2003). Close