Oregon Explorer CrossSearch Search Results

Search

You searched for: Start Over Temperature Remove constraint Temperature Subject GEOTHERMAL FIELDS Remove constraint Subject: GEOTHERMAL FIELDS Subject Geothermal engineering Remove constraint Subject: Geothermal engineering Subject NORTH AMERICA Remove constraint Subject: NORTH AMERICA

1 - 3 of 3

Search Results

1. [Image] Conceptual Design of Commercial 50 MWe(Net) Geothermal Power Plants at Heber and Niland, California. Final Report


	The scope of work of this study includes conceptual designs, corresponding capital cost estimates and engineering and construction schedules for two 50 MWe (net) commercial-scale geothermal power plants. ...
	Citation Citation Citation Abstract Copy Title: Conceptual Design of Commercial 50 MWe(Net) Geothermal Power Plants at Heber and Niland, California. Final Report Author: Bechtel Corporation Year: 1976 The scope of work of this study includes conceptual designs, corresponding capital cost estimates and engineering and construction schedules for two 50 MWe (net) commercial-scale geothermal power plants. In order to develop and illustrate the concepts involved, the reservoir and site conditions of the geothermal field near Heber, California, which has moderate-temperature low-salinity brine, were used for one of the power plants. The conditions of the field near Niland, California (or the Salton Sea Geothermal Field), which has high-temperature high-salinity brine, were used for the other plant. Both fields are located in the Imperial Valley in Southern California. The two plants give perspective on plant design and capital costs for the range of hydrothermal resources that are of economic interest for electric power generation Title: Conceptual Design of Commercial 50 MWe(Net) Geothermal Power Plants at Heber and Niland, California. Final Report Author: Bechtel Corporation Year: 1976 The scope of work of this study includes conceptual designs, corresponding capital cost estimates and engineering and construction schedules for two 50 MWe (net) commercial-scale geothermal power plants. In order to develop and illustrate the concepts involved, the reservoir and site conditions of the geothermal field near Heber, California, which has moderate-temperature low-salinity brine, were used for one of the power plants. The conditions of the field near Niland, California (or the Salton Sea Geothermal Field), which has high-temperature high-salinity brine, were used for the other plant. Both fields are located in the Imperial Valley in Southern California. The two plants give perspective on plant design and capital costs for the range of hydrothermal resources that are of economic interest for electric power generation

2. [Image] Geothermal Reservoir Categorization and Stimulation Study


	Analyses of the fraction of geothermal wells that are dry (dry-hole fraction) indicate that geothermal reservoirs can be fitted into four basic categories: (i) Quaternary to late Tertiary sediments (almost ...
	Citation Citation Citation Abstract Copy Title: Geothermal Reservoir Categorization and Stimulation Study Author: Overton, H.L. Year: 1977 Analyses of the fraction of geothermal wells that are dry (dry-hole fraction) indicate that geothermal reservoirs can be fitted into four basic categories: (i) Quaternary to late Tertiary sediments (almost no dry holes); (ii) Quaternary to late Tertiary extrusives (approximately 20 percent dry holes); (iii) Mesozoic or older metamorphic rocks (approximately 25-30 percent dry holes); and (iv) Precambrian or younger rocks (data limited to Roosevelt Springs where 33 percent of the wells were dry). Failure of geothermal wells to flow economically is due mainly to low-permeability formations in unfractured regions. Generally the permeability correlates inversely with the temperature-age product and directly with the original rock porosity and pore size. However, this correlation fails whenever high-stress fields provide vertical fracturing or faulting, and it is the high-stress/low-permeability category that is most amenable to artificial stimulation by hydraulic fracturing, propellant fracturing, or chemical explosive fracturing. Category (i) geothermal fields (e.g., Cerro Prieto, Mexico; Niland, CA; East Mesa, CA) are not recommended for artificial stimulation because these younger sediments almost always produce warm or hot water. Most geothermal fields fit into category (ii) (e.g., Wairakei, New Zealand; Matsukawa, Japan; Ahuachapan, El Salvador) and in the case of Mt. Home, ID, and Chandler, AZ, possess some potential for stimulation. The Geysers is a category (iii) field, and its highly stressed brittle rocks should make this site amenable to stimulation by explosive fracturing techniques. Roosevelt Springs, UT, Well 9-1 is in category (iv) and is a flow failure. It represents a prime candidate for stimulation by hydraulic fracturing because it has a measured temperature of 227/sup 0/C, is cased and available for experimentation, and is within 900 m of an excellent geothermal producing well Title: Geothermal Reservoir Categorization and Stimulation Study Author: Overton, H.L. Year: 1977 Analyses of the fraction of geothermal wells that are dry (dry-hole fraction) indicate that geothermal reservoirs can be fitted into four basic categories: (i) Quaternary to late Tertiary sediments (almost no dry holes); (ii) Quaternary to late Tertiary extrusives (approximately 20 percent dry holes); (iii) Mesozoic or older metamorphic rocks (approximately 25-30 percent dry holes); and (iv) Precambrian or younger rocks (data limited to Roosevelt Springs where 33 percent of the wells were dry). Failure of geothermal wells to flow economically is due mainly to low-permeability formations in unfractured regions. Generally the permeability correlates inversely with the temperature-age product and directly with the original rock porosity and pore size. However, this correlation fails whenever high-stress fields provide vertical fracturing or faulting, and it is the high-stress/low-permeability category that is most amenable to artificial stimulation by hydraulic fracturing, propellant fracturing, or chemical explosive fracturing. Category (i) geothermal fields (e.g., Cerro Prieto, Mexico; Niland, CA; East Mesa, CA) are not recommended for artificial stimulation because these younger sediments almost always produce warm or hot water. Most geothermal fields fit into category (ii) (e.g., Wairakei, New Zealand; Matsukawa, Japan; Ahuachapan, El Salvador) and in the case of Mt. Home, ID, and Chandler, AZ, possess some potential for stimulation. The Geysers is a category (iii) field, and its highly stressed brittle rocks should make this site amenable to stimulation by explosive fracturing techniques. Roosevelt Springs, UT, Well 9-1 is in category (iv) and is a flow failure. It represents a prime candidate for stimulation by hydraulic fracturing because it has a measured temperature of 227/sup 0/C, is cased and available for experimentation, and is within 900 m of an excellent geothermal producing well

3. [Image] Transient well testing in two-phase geothermal reservoirs


	A study of well test analysis techniques in two-phase geothermal reservoirs has been conducted using a three-dimensional, two-phase, wellbore and reservoir simulation model. Well tests from Cerro Prieto ...
	Citation Citation Citation Abstract Copy Title: Transient well testing in two-phase geothermal reservoirs Author: Aydelotte, S.R. Year: 1980 A study of well test analysis techniques in two-phase geothermal reservoirs has been conducted using a three-dimensional, two-phase, wellbore and reservoir simulation model. Well tests from Cerro Prieto and the Hawaiian Geothermal project have been history matched. Using these well tests as a base, the influence of reservoir permeability, porosity, thickness, and heat capacity, along with flow rate and fracturing were studied. Single and two-phase transient well test equations were used to analyze these tests with poor results due to rapidly changing fluid properties and inability to calculate the flowing steam saturation in the reservoir. The injection of cold water into the reservoir does give good data from which formation properties can be calculated. Title: Transient well testing in two-phase geothermal reservoirs Author: Aydelotte, S.R. Year: 1980 A study of well test analysis techniques in two-phase geothermal reservoirs has been conducted using a three-dimensional, two-phase, wellbore and reservoir simulation model. Well tests from Cerro Prieto and the Hawaiian Geothermal project have been history matched. Using these well tests as a base, the influence of reservoir permeability, porosity, thickness, and heat capacity, along with flow rate and fracturing were studied. Single and two-phase transient well test equations were used to analyze these tests with poor results due to rapidly changing fluid properties and inability to calculate the flowing steam saturation in the reservoir. The injection of cold water into the reservoir does give good data from which formation properties can be calculated.