Search

Search Results

• 11. [Image] Geological and Geophysical Study of the Origin of the Warm Springs in Bath County, Virginia. Final Report, June 1, 1975--April 30, 1976

  	The results of heat flow determinations and a reconnaissance dipole electrical resistivity survey in Bath County are described. A geologic map was compiled based on published maps and supported by reconnaissance ...
  	Citation × Citation Citation Abstract Copy Title: Geological and Geophysical Study of the Origin of the Warm Springs in Bath County, Virginia. Final Report, June 1, 1975--April 30, 1976 Author: Costain, J.K. Year: 1976 The results of heat flow determinations and a reconnaissance dipole electrical resistivity survey in Bath County are described. A geologic map was compiled based on published maps and supported by reconnaissance geologic mapping in areas where published maps were not available. A regional bipole--dipole electrical resistivity survey was made in order to detect the presence of resistivity lows that might be associated with a geothermal system at depth. A single hole was drilled to a depth of approximately 300 m (approx. 1000 feet) to obtain a heat flow value that is representative of the area. The data were used to attempt to arrive at a model that unambiguously explains the origin of the thermal springs Title: Geological and Geophysical Study of the Origin of the Warm Springs in Bath County, Virginia. Final Report, June 1, 1975--April 30, 1976 Author: Costain, J.K. Year: 1976 The results of heat flow determinations and a reconnaissance dipole electrical resistivity survey in Bath County are described. A geologic map was compiled based on published maps and supported by reconnaissance geologic mapping in areas where published maps were not available. A regional bipole--dipole electrical resistivity survey was made in order to detect the presence of resistivity lows that might be associated with a geothermal system at depth. A single hole was drilled to a depth of approximately 300 m (approx. 1000 feet) to obtain a heat flow value that is representative of the area. The data were used to attempt to arrive at a model that unambiguously explains the origin of the thermal springs Close

• 12. [Image] Low-Temperature Geothermal Reservoir Site Evaluation in Arizona. Quarterly Progress Report, August 1, 1977--October 31, 1977

  	Progress in the development of a cost-effective exploration program for low- to moderate-temperature geothermal resources is reported. As part of this program two or three demonstration projects in Arizona ...
  	Citation × Citation Citation Abstract Copy Title: Low-Temperature Geothermal Reservoir Site Evaluation in Arizona. Quarterly Progress Report, August 1, 1977--October 31, 1977 Author: Hahman, W.R. Sr. Year: 1977 Progress in the development of a cost-effective exploration program for low- to moderate-temperature geothermal resources is reported. As part of this program two or three demonstration projects in Arizona will be brought on stream. The site-specific exploration, evaluation and development program as well as the state wide reconnaissance exploration program is continuing. The compilation of data for a geothermal energy resource map of Arizona has commenced. Geological field work was directed towards obtaining a broad overview of Arizona geology and regional reconnaissance in the Springerville - St. Johns area. All outside projects are on schedule and the Landsat lineament map and report have been completed Title: Low-Temperature Geothermal Reservoir Site Evaluation in Arizona. Quarterly Progress Report, August 1, 1977--October 31, 1977 Author: Hahman, W.R. Sr. Year: 1977 Progress in the development of a cost-effective exploration program for low- to moderate-temperature geothermal resources is reported. As part of this program two or three demonstration projects in Arizona will be brought on stream. The site-specific exploration, evaluation and development program as well as the state wide reconnaissance exploration program is continuing. The compilation of data for a geothermal energy resource map of Arizona has commenced. Geological field work was directed towards obtaining a broad overview of Arizona geology and regional reconnaissance in the Springerville - St. Johns area. All outside projects are on schedule and the Landsat lineament map and report have been completed Close

• 13. [Image] Testing Operations Plan: Coso Geothermal Exploratory Hole No. 1 (CGEH-1)

  	Coso Geothermal Exploratory Hole No. 1 (CGEH-1) was drilled to investigate the potential of the Coso Hot Springs Known Geothermal Resource Area (KGRA) in southeastern California. Detailed background information ...
  	Citation × Citation Citation Abstract Copy Title: Testing Operations Plan: Coso Geothermal Exploratory Hole No. 1 (CGEH-1) Author: Nevada Operations Office; Naval Weapons Center, China Lake Year: 1978 Coso Geothermal Exploratory Hole No. 1 (CGEH-1) was drilled to investigate the potential of the Coso Hot Springs Known Geothermal Resource Area (KGRA) in southeastern California. Detailed background information is contained in the drilling plan, ''Coso Geothermal Exploratory Hole No. 1 (CGEH-1),'' NVO-184, dated June 1977. The purpose of this supplement to NVO-184 is to establish a plan of operations for testing the resource after completion of well drilling activities. Major elements of this plan include setting forth the management and organizational concept to be followed, describing the generalized site activities required and the well testing operations, and establishing schedules, environmental considerations, and technical documentation requirements. The objective of this testing is to determine the well productivity and geothermal reservoir parameters. The testing will consist of both static and dynamic measurements. The static measurements will include wellhead pressure monitoring plus downhole temperature and pressure surveys conducted with the well shut in. The dynamic measurements will include downhole and surface pressure, temperature, and flow rate data with the well producing at varying rates. Two types of dynamic tests are contemplated; the first utilizing the James Method and the second utilizing a separator test system, if justified by an evaluation of the resource potential Title: Testing Operations Plan: Coso Geothermal Exploratory Hole No. 1 (CGEH-1) Author: Nevada Operations Office; Naval Weapons Center, China Lake Year: 1978 Coso Geothermal Exploratory Hole No. 1 (CGEH-1) was drilled to investigate the potential of the Coso Hot Springs Known Geothermal Resource Area (KGRA) in southeastern California. Detailed background information is contained in the drilling plan, ''Coso Geothermal Exploratory Hole No. 1 (CGEH-1),'' NVO-184, dated June 1977. The purpose of this supplement to NVO-184 is to establish a plan of operations for testing the resource after completion of well drilling activities. Major elements of this plan include setting forth the management and organizational concept to be followed, describing the generalized site activities required and the well testing operations, and establishing schedules, environmental considerations, and technical documentation requirements. The objective of this testing is to determine the well productivity and geothermal reservoir parameters. The testing will consist of both static and dynamic measurements. The static measurements will include wellhead pressure monitoring plus downhole temperature and pressure surveys conducted with the well shut in. The dynamic measurements will include downhole and surface pressure, temperature, and flow rate data with the well producing at varying rates. Two types of dynamic tests are contemplated; the first utilizing the James Method and the second utilizing a separator test system, if justified by an evaluation of the resource potential Close

• 14. [Image] Non-Electric Applications of Geothermal Energy in Six Alaskan Towns. Final Report, October 1976--November 1977

  	The potential for direct (non-electric) utilization of local-gradient geothermal energy in six Alaskan towns is summarized. A major objective of this study was to stimulate development and Use of the geothermal ...
  	Citation × Citation Citation Abstract Copy Title: Non-Electric Applications of Geothermal Energy in Six Alaskan Towns. Final Report, October 1976--November 1977 Author: Farquhar, J. Year: 1977 The potential for direct (non-electric) utilization of local-gradient geothermal energy in six Alaskan towns is summarized. A major objective of this study was to stimulate development and Use of the geothermal resource provided by the earth's average thermal gradient, as opposed to the few anomalies that are typically chosen for geothermal development. Hence, six towns for study were selected as being representative of remote Alaskan conditions, rather than for their proximity to known geothermal resources. The moderate-temperature heat available almost everywhere at depths of two to four kilometers into the earth's mantle could satisfy a major portion of the nation's heating requirements--but the cost must be reduced. It is concluded that a geothermal demonstration in Nome would probably be successful and would promote this objective Title: Non-Electric Applications of Geothermal Energy in Six Alaskan Towns. Final Report, October 1976--November 1977 Author: Farquhar, J. Year: 1977 The potential for direct (non-electric) utilization of local-gradient geothermal energy in six Alaskan towns is summarized. A major objective of this study was to stimulate development and Use of the geothermal resource provided by the earth's average thermal gradient, as opposed to the few anomalies that are typically chosen for geothermal development. Hence, six towns for study were selected as being representative of remote Alaskan conditions, rather than for their proximity to known geothermal resources. The moderate-temperature heat available almost everywhere at depths of two to four kilometers into the earth's mantle could satisfy a major portion of the nation's heating requirements--but the cost must be reduced. It is concluded that a geothermal demonstration in Nome would probably be successful and would promote this objective Close

• 15. [Image] Innovation Versus Monopoly: Geothermal Energy in the West. Final Report

  	The following subjects are covered: geothermal energy and its use, electric utilities and the climate for geothermal development, the raw fuels industry and geothermal energy, and government and energy. ...
  	Citation × Citation Citation Abstract Copy Title: Innovation Versus Monopoly: Geothermal Energy in the West. Final Report Author: Bierman, S.L. Year: 1977 The following subjects are covered: geothermal energy and its use, electric utilities and the climate for geothermal development, the raw fuels industry and geothermal energy, and government and energy. The role of large petroleum companies and large public utilities is emphasized. (MHR) Title: Innovation Versus Monopoly: Geothermal Energy in the West. Final Report Author: Bierman, S.L. Year: 1977 The following subjects are covered: geothermal energy and its use, electric utilities and the climate for geothermal development, the raw fuels industry and geothermal energy, and government and energy. The role of large petroleum companies and large public utilities is emphasized. (MHR) Close

• 16. [Image] The Marysville, Montana Geothermal Project (Revised)

  	The object of the Marysville Geothermal Project is to investigate a region of abnormally high geothermal heat flow near Marysville, MT, about 20 miles northwest of Helena. The research should determine ...
  	Citation × Citation Citation Abstract Copy Title: The Marysville, Montana Geothermal Project (Revised) Author: McSpadden, W.R. Year: 1974 The object of the Marysville Geothermal Project is to investigate a region of abnormally high geothermal heat flow near Marysville, MT, about 20 miles northwest of Helena. The research should determine the nature and size of the resource, how the energy might be extracted, the potential monetary value of the energy, and how similar resources elsewhere might be located. The heat source was expected to be a granitic pluton or magmatic intrusion, 10,000 to 40,000 years old, with temperatures in the range of 300 to 500°C. Originally it was thought that the pluton was at relatively shallow depths, but at present its depth and exact location are unknown Title: The Marysville, Montana Geothermal Project (Revised) Author: McSpadden, W.R. Year: 1974 The object of the Marysville Geothermal Project is to investigate a region of abnormally high geothermal heat flow near Marysville, MT, about 20 miles northwest of Helena. The research should determine the nature and size of the resource, how the energy might be extracted, the potential monetary value of the energy, and how similar resources elsewhere might be located. The heat source was expected to be a granitic pluton or magmatic intrusion, 10,000 to 40,000 years old, with temperatures in the range of 300 to 500°C. Originally it was thought that the pluton was at relatively shallow depths, but at present its depth and exact location are unknown Close

• 17. [Image] Evaluation and Targeting of Geothermal Energy Resources in the Southeastern United States. Progress Report, May 1, 1976--October 31, 1976

  	Progress is reported in the development of procedures for the evaluation of low-temperature radiogenically-derived geothermal resources in the eastern United States utilizing geological geochemical, and ...
  	Citation × Citation Citation Abstract Copy Title: Evaluation and Targeting of Geothermal Energy Resources in the Southeastern United States. Progress Report, May 1, 1976--October 31, 1976 Author: Costain, J.K. Year: 1976 Progress is reported in the development of procedures for the evaluation of low-temperature radiogenically-derived geothermal resources in the eastern United States utilizing geological geochemical, and geophysical data. An optimum site for geothermal development in the tectonically stable eastern United States will probably be associated with crustal igneous rocks containing relatively high concentrations of radiogenic heat-producing elements buried beneath an insulating blanket of sediments of low thermal conductivity. Evaluation of plutonic rocks exposed in the Piedmont will aid in the interpretation of gravity and magnetic data for the Atlantic Coastal Plain. Initial results of determination of heat generation from surface samples in South Caroline are encouraging, especially if granitic igneous rocks of similar heat generation can be found beneath sedimentary insulation. Continues logging of existing wells in Coastal Plain sediments supports earlier conclusion that these sediments do behave as efficient sedimentary insulators. Higher temperatures appear to be reached at shallower depths for wells drilled in Coastal Plain sediments in the vicinity of the Georgetown, South Carolina gravity law. Detailed structural mapping in the vicinity of the warm springs in northwestern Virginia has confirmed structural control of the warm springs, and has revealed the existence of kink bands. The kink bands could be related to the development of zones of vertical permeability which serve as conduits in sedimentary rocks for ascending hot water. Title: Evaluation and Targeting of Geothermal Energy Resources in the Southeastern United States. Progress Report, May 1, 1976--October 31, 1976 Author: Costain, J.K. Year: 1976 Progress is reported in the development of procedures for the evaluation of low-temperature radiogenically-derived geothermal resources in the eastern United States utilizing geological geochemical, and geophysical data. An optimum site for geothermal development in the tectonically stable eastern United States will probably be associated with crustal igneous rocks containing relatively high concentrations of radiogenic heat-producing elements buried beneath an insulating blanket of sediments of low thermal conductivity. Evaluation of plutonic rocks exposed in the Piedmont will aid in the interpretation of gravity and magnetic data for the Atlantic Coastal Plain. Initial results of determination of heat generation from surface samples in South Caroline are encouraging, especially if granitic igneous rocks of similar heat generation can be found beneath sedimentary insulation. Continues logging of existing wells in Coastal Plain sediments supports earlier conclusion that these sediments do behave as efficient sedimentary insulators. Higher temperatures appear to be reached at shallower depths for wells drilled in Coastal Plain sediments in the vicinity of the Georgetown, South Carolina gravity law. Detailed structural mapping in the vicinity of the warm springs in northwestern Virginia has confirmed structural control of the warm springs, and has revealed the existence of kink bands. The kink bands could be related to the development of zones of vertical permeability which serve as conduits in sedimentary rocks for ascending hot water. Close

• 18. [Image] Subsurface investigations at the Roosevelt KGRA, Utah. Final report

  	An investigation of the geothermal reservoir in the Roosevelt Hot Springs Known Geothermal Resource Area in Utah was carried out. The objective of this effort was to develop predictions for well production ...
  	Citation × Citation Citation Abstract Copy Title: Subsurface investigations at the Roosevelt KGRA, Utah. Final report Author: Butz, J. Year: 1979 An investigation of the geothermal reservoir in the Roosevelt Hot Springs Known Geothermal Resource Area in Utah was carried out. The objective of this effort was to develop predictions for well production capacities, based on data taken during field tests and through use of a computer model. In turn, the production information could then be used in design optimization and economic analyses for development of the resource under study. Flow tests of a geothermal well, Utah State 14-2, were conducted. Data consisting of pressure and temperature logs as a function of depth were obtained. Maximum recorded temperature was 503/sup 0/F (262/sup 0/C) and maximum pressure, 954 psia (6.58MPa) as measured under flow conditions. Tests were run at rates up to 580,000 lb/hr (73.3 kg/sec) total flow. The information gathered during the testing was reduced and compared to results of a predictive computer model. Reservoir conditions in the Roosevelt Hot Springs KGRA are such that two-phase flow exists in the wellbore and, in some cases, also in the reservoir itself. The computer model employed in the analysis reflects current efforts to improve the state-of-the-art in the prediction of two-phase pressure drops in vertical systems. Predictions at flowrates of up to 300,000 lb/hr (38 kg/sec) matched quite well with test data, while modeling at higher flowrates (to maximum tested) showed progressively greater deviation from test data. Cause of the observed degradation is postulated to be the movement of the flash horizon into the reservoir, due to drawdown at high flowrates; DOE/ET/28389-1 Title: Subsurface investigations at the Roosevelt KGRA, Utah. Final report Author: Butz, J. Year: 1979 An investigation of the geothermal reservoir in the Roosevelt Hot Springs Known Geothermal Resource Area in Utah was carried out. The objective of this effort was to develop predictions for well production capacities, based on data taken during field tests and through use of a computer model. In turn, the production information could then be used in design optimization and economic analyses for development of the resource under study. Flow tests of a geothermal well, Utah State 14-2, were conducted. Data consisting of pressure and temperature logs as a function of depth were obtained. Maximum recorded temperature was 503/sup 0/F (262/sup 0/C) and maximum pressure, 954 psia (6.58MPa) as measured under flow conditions. Tests were run at rates up to 580,000 lb/hr (73.3 kg/sec) total flow. The information gathered during the testing was reduced and compared to results of a predictive computer model. Reservoir conditions in the Roosevelt Hot Springs KGRA are such that two-phase flow exists in the wellbore and, in some cases, also in the reservoir itself. The computer model employed in the analysis reflects current efforts to improve the state-of-the-art in the prediction of two-phase pressure drops in vertical systems. Predictions at flowrates of up to 300,000 lb/hr (38 kg/sec) matched quite well with test data, while modeling at higher flowrates (to maximum tested) showed progressively greater deviation from test data. Cause of the observed degradation is postulated to be the movement of the flash horizon into the reservoir, due to drawdown at high flowrates; DOE/ET/28389-1 Close

• 19. [Image] Downhole Electrical Detection of Hydraulic Fractures in GT-2 and EE-1

  	Electrical geophysical methods including mise a la masse and self-potential (SP) for determination of hydraulic fracture characteristics were used at the hot dry rock geothermal project. Electrical and ...
  	Citation × Citation Citation Abstract Copy Title: Downhole Electrical Detection of Hydraulic Fractures in GT-2 and EE-1 Author: Kintzinger, P.R. Year: 1977 Electrical geophysical methods including mise a la masse and self-potential (SP) for determination of hydraulic fracture characteristics were used at the hot dry rock geothermal project. Electrical and induction logs indicated that the resistivity contrast between the granite and 200/sup 0/C water at the 2926-m (9600-ft) depth is a factor of 1000 or more. Thus the water in a hydraulic fracture, formed to connect two adjacent deep holes, is a good conductor compared to the confining granite. Mise a la masse-type measurements were made to help determine the characteristics for hydraulic fractures formed in each of the two geothermal holes GT-2 and EE-1. Once a hydraulic fracture has been formed, mise a la masse effects are obtained both with the fracture pressurized above hydrostatic and when depressurized to hydrostatic. This indicates that once the fracture has been created, enough natural propping exists that a conductive zone persists even when the fracture is deflated. A fracture was formed in a 18-m (60-ft) zone immediately below 1957 m (6420 ft) in EE-1. Later a set of SP logs was run in this zone with no pressure, with pressure building, with pressure decreasing, and again with the fracture depressurized. Results show that during times of change of parameters in hydraulically fractured regions in the hole, natural SP logging helps to determine the position of the fracture. However, after a fracture has come to equilibrium with fluid parameters such as temperature, pressure, salinity, and pH, an effect of the fracture may not be evident. Self-potential logs provide an excellent method for locating the bottom of steel casing that has been set in the hole Title: Downhole Electrical Detection of Hydraulic Fractures in GT-2 and EE-1 Author: Kintzinger, P.R. Year: 1977 Electrical geophysical methods including mise a la masse and self-potential (SP) for determination of hydraulic fracture characteristics were used at the hot dry rock geothermal project. Electrical and induction logs indicated that the resistivity contrast between the granite and 200/sup 0/C water at the 2926-m (9600-ft) depth is a factor of 1000 or more. Thus the water in a hydraulic fracture, formed to connect two adjacent deep holes, is a good conductor compared to the confining granite. Mise a la masse-type measurements were made to help determine the characteristics for hydraulic fractures formed in each of the two geothermal holes GT-2 and EE-1. Once a hydraulic fracture has been formed, mise a la masse effects are obtained both with the fracture pressurized above hydrostatic and when depressurized to hydrostatic. This indicates that once the fracture has been created, enough natural propping exists that a conductive zone persists even when the fracture is deflated. A fracture was formed in a 18-m (60-ft) zone immediately below 1957 m (6420 ft) in EE-1. Later a set of SP logs was run in this zone with no pressure, with pressure building, with pressure decreasing, and again with the fracture depressurized. Results show that during times of change of parameters in hydraulically fractured regions in the hole, natural SP logging helps to determine the position of the fracture. However, after a fracture has come to equilibrium with fluid parameters such as temperature, pressure, salinity, and pH, an effect of the fracture may not be evident. Self-potential logs provide an excellent method for locating the bottom of steel casing that has been set in the hole Close

• 20. [Image] Preliminary Petrographic and Geophysical Interpretations of the Exploratory Geothermal Drill Hole and Core, Redstone, New Hampshire

  	A 3000 foot diamond drill hole was drilled in the Conway Granite in Redstone, New Hampshire. A comprehensive detailed petrographic and physical study of this core was made. The purpose of this study is ...
  	Citation × Citation Citation Abstract Copy Title: Preliminary Petrographic and Geophysical Interpretations of the Exploratory Geothermal Drill Hole and Core, Redstone, New Hampshire Author: Hoag, R.B. Jr. Year: 1977 A 3000 foot diamond drill hole was drilled in the Conway Granite in Redstone, New Hampshire. A comprehensive detailed petrographic and physical study of this core was made. The purpose of this study is to supply a sound data base for future geothermal and uranium-thorium studies of the drill core. An estimate of the heat flow potential of the Redstone drill hole gives a heat flow of 1.9 HFU. If only the red phase of the Conway Granite had been intersected the heat flow may have been as much as 2.7 HFU, reaching a temperature of 260/sup 0/C at 6 km. The drill hole intersected four lithologies; the green and red phase of the Conway Granite, the Albany quartz syenite and a medium-grained, hastingsite-biotite granite. The red phase has the highest and most irregular radioactivity. The irregularity is mainly due to minor variations in lithology. The Drill core intersected several alteration zones up to a thickness of 150 feet. These alteration zones represent passage of low to medium temperature fluids which might have been mineralized. The Conway Granite has the physical and chemical characteristics necessary for the formation of vein type uranium deposits. The presence of unexplained radiometric anomalies lends support to the existence of such deposits Title: Preliminary Petrographic and Geophysical Interpretations of the Exploratory Geothermal Drill Hole and Core, Redstone, New Hampshire Author: Hoag, R.B. Jr. Year: 1977 A 3000 foot diamond drill hole was drilled in the Conway Granite in Redstone, New Hampshire. A comprehensive detailed petrographic and physical study of this core was made. The purpose of this study is to supply a sound data base for future geothermal and uranium-thorium studies of the drill core. An estimate of the heat flow potential of the Redstone drill hole gives a heat flow of 1.9 HFU. If only the red phase of the Conway Granite had been intersected the heat flow may have been as much as 2.7 HFU, reaching a temperature of 260/sup 0/C at 6 km. The drill hole intersected four lithologies; the green and red phase of the Conway Granite, the Albany quartz syenite and a medium-grained, hastingsite-biotite granite. The red phase has the highest and most irregular radioactivity. The irregularity is mainly due to minor variations in lithology. The Drill core intersected several alteration zones up to a thickness of 150 feet. These alteration zones represent passage of low to medium temperature fluids which might have been mineralized. The Conway Granite has the physical and chemical characteristics necessary for the formation of vein type uranium deposits. The presence of unexplained radiometric anomalies lends support to the existence of such deposits Close