Search

Search Results

• 11. [Image] Geothermal investigations at selected thermal systems of the northern Wasatch Front Weber and Box Elder Counties, Utah. Report of investigation No. 141

  	Numerous thermal springs are present along the Wasatch Front from Utah valley on the south to the state line on the north. These systems are just west of the Wasatch Mountains at the eastern edge of the ...
  	Citation × Citation Citation Abstract Copy Title: Geothermal investigations at selected thermal systems of the northern Wasatch Front Weber and Box Elder Counties, Utah. Report of investigation No. 141 Author: Murphy, P. Year: 1979 Numerous thermal springs are present along the Wasatch Front from Utah valley on the south to the state line on the north. These systems are just west of the Wasatch Mountains at the eastern edge of the Basin and Range physiographic province and within the active seismic zone referred to as the Intermountain Seismic Belt. This Report of Investigation is a summary of UGMS investigations at four northern Wasatch Front geothermal systems: Utah, Crystal (Madsen), and Udy hot springs; and the Little Mountain - south system. All of these resources are deep circulation systems and the water is heated by the normal heat flow of the Basin and Range Province. Heat from volcanic sources is not believed to contribute to the warming of any northern Wasatch Front springs. Data collected under the DOE/DGE state coupled program are presented for use by individuals interested in these systems; DOE/ET/28393-18 Title: Geothermal investigations at selected thermal systems of the northern Wasatch Front Weber and Box Elder Counties, Utah. Report of investigation No. 141 Author: Murphy, P. Year: 1979 Numerous thermal springs are present along the Wasatch Front from Utah valley on the south to the state line on the north. These systems are just west of the Wasatch Mountains at the eastern edge of the Basin and Range physiographic province and within the active seismic zone referred to as the Intermountain Seismic Belt. This Report of Investigation is a summary of UGMS investigations at four northern Wasatch Front geothermal systems: Utah, Crystal (Madsen), and Udy hot springs; and the Little Mountain - south system. All of these resources are deep circulation systems and the water is heated by the normal heat flow of the Basin and Range Province. Heat from volcanic sources is not believed to contribute to the warming of any northern Wasatch Front springs. Data collected under the DOE/DGE state coupled program are presented for use by individuals interested in these systems; DOE/ET/28393-18 Close

• 12. [Image] Dipole-Dipole Resistivity Surveys, Roosevelt Hot Springs KGRA. Final Report, Volume 2

  	Dipole-dipole Resistivity surveys were conducted at Roosevelt Hot Springs KGRA. Three different dipole spacings were used; 99km of traverse line were surveyed with 100m dipoles, 50km with 300m dipoles, ...
  	Citation × Citation Citation Abstract Copy Title: Dipole-Dipole Resistivity Surveys, Roosevelt Hot Springs KGRA. Final Report, Volume 2 Author: Ward, S.H. Year: 1976 Dipole-dipole Resistivity surveys were conducted at Roosevelt Hot Springs KGRA. Three different dipole spacings were used; 99km of traverse line were surveyed with 100m dipoles, 50km with 300m dipoles, and 44km with 1km dipoles. The objectives of the Resistivity surveying were to detect and delineate regions of low Resistivity associated with fracturing, brines, high temperatures, and clay alteration. The Resistivity of rocks that are typical of hydrothermal environments is due to two main conduction mechanisms: (1) electrolytic conduction through pores and fractures; and (2) surface conduction due to a thin zone of cations attracted to those mineral surfaces with net negative charges (especially clay minerals). For saturated rocks, the Resistivity due to electrolytic conduction is a function of the effective porosity of the fractured rock, of the temperature, and of the salinity of the fluid filling the pores and fractures. The Resistivity decreases as the effective porosity, water saturation, salinity, and temperature increase. The presence of clay minerals and pyrite will also decrease the Resistivity Title: Dipole-Dipole Resistivity Surveys, Roosevelt Hot Springs KGRA. Final Report, Volume 2 Author: Ward, S.H. Year: 1976 Dipole-dipole Resistivity surveys were conducted at Roosevelt Hot Springs KGRA. Three different dipole spacings were used; 99km of traverse line were surveyed with 100m dipoles, 50km with 300m dipoles, and 44km with 1km dipoles. The objectives of the Resistivity surveying were to detect and delineate regions of low Resistivity associated with fracturing, brines, high temperatures, and clay alteration. The Resistivity of rocks that are typical of hydrothermal environments is due to two main conduction mechanisms: (1) electrolytic conduction through pores and fractures; and (2) surface conduction due to a thin zone of cations attracted to those mineral surfaces with net negative charges (especially clay minerals). For saturated rocks, the Resistivity due to electrolytic conduction is a function of the effective porosity of the fractured rock, of the temperature, and of the salinity of the fluid filling the pores and fractures. The Resistivity decreases as the effective porosity, water saturation, salinity, and temperature increase. The presence of clay minerals and pyrite will also decrease the Resistivity Close

• 13. [Image] Comparative assessment of five potential sites for magma: hydrothermal systems - geophysics

  	As part of a comparative assessment for the Continental Scientific Drilling Program, geophysical data were used, to characterize and evaluate potential magma-hydrothermal targets at five drill sites in ...
  	Citation × Citation Citation Abstract Copy Title: Comparative assessment of five potential sites for magma: hydrothermal systems - geophysics Author: Kasameyer, P. Year: 1980 As part of a comparative assessment for the Continental Scientific Drilling Program, geophysical data were used, to characterize and evaluate potential magma-hydrothermal targets at five drill sites in the western United States. The sites include Roosevelt Hot Springs, Utah, the Rio Grande Rift, New Mexico, and The Geysers-Clear Lake, Long Valley, and Salton Trough areas, California. This summary discusses the size, depth, temperature, and setting of each potential target, as well as relvant scientific questions about their natures and the certainty of their existence.; UCRL-52980 Title: Comparative assessment of five potential sites for magma: hydrothermal systems - geophysics Author: Kasameyer, P. Year: 1980 As part of a comparative assessment for the Continental Scientific Drilling Program, geophysical data were used, to characterize and evaluate potential magma-hydrothermal targets at five drill sites in the western United States. The sites include Roosevelt Hot Springs, Utah, the Rio Grande Rift, New Mexico, and The Geysers-Clear Lake, Long Valley, and Salton Trough areas, California. This summary discusses the size, depth, temperature, and setting of each potential target, as well as relvant scientific questions about their natures and the certainty of their existence.; UCRL-52980 Close

• 14. [Image] Low-Temperature Geothermal Reservoir Site Evaluation in Arizona Quarterly Progress Report for Periods: May 1, 1977 - July 31, 1977; August 1, 1977 – October 31, 1977; November 1, 1977 – January 31, 1978

  	Progress in the development of a cost-effective exploration program for low- to moderate-temperature geothermal resources is reported. As part of this program two or three demonstration projects in Arizona ...
  	Citation × Citation Citation Abstract Copy Title: Low-Temperature Geothermal Reservoir Site Evaluation in Arizona Quarterly Progress Report for Periods: May 1, 1977 - July 31, 1977; August 1, 1977 – October 31, 1977; November 1, 1977 – January 31, 1978 Author: Hahman, W.R. Sr. Year: 1978 Progress in the development of a cost-effective exploration program for low- to moderate-temperature geothermal resources is reported. As part of this program two or three demonstration projects in Arizona will be brought on stream. The site-specific exploration, evaluation and development program as well as the state wide reconnaissance exploration program is continuing. The compilation of data for a geothermal energy resource map of Arizona has commenced. Geological field work was directed towards obtaining a broad overview of Arizona geology and regional reconnaissance in the Springerville - St. Johns area. All outside projects are on schedule and the Landsat lineament map and report have been completed Title: Low-Temperature Geothermal Reservoir Site Evaluation in Arizona Quarterly Progress Report for Periods: May 1, 1977 - July 31, 1977; August 1, 1977 – October 31, 1977; November 1, 1977 – January 31, 1978 Author: Hahman, W.R. Sr. Year: 1978 Progress in the development of a cost-effective exploration program for low- to moderate-temperature geothermal resources is reported. As part of this program two or three demonstration projects in Arizona will be brought on stream. The site-specific exploration, evaluation and development program as well as the state wide reconnaissance exploration program is continuing. The compilation of data for a geothermal energy resource map of Arizona has commenced. Geological field work was directed towards obtaining a broad overview of Arizona geology and regional reconnaissance in the Springerville - St. Johns area. All outside projects are on schedule and the Landsat lineament map and report have been completed Close

• 15. [Image] Geothermal Exploration of the Parbati Valley Geothermal Field, Kulu District, Himachal Pradesh, India

  	The Parbati Valley Geothermal Field is divided into five sectors and out of these a geothermal exploration program has been launched in two sectors - Manikaran and Kasol. This field lies to southwest of ...
  	Citation × Citation Citation Abstract Copy Title: Geothermal Exploration of the Parbati Valley Geothermal Field, Kulu District, Himachal Pradesh, India Author: Jangi, B.L. The Parbati Valley Geothermal Field is divided into five sectors and out of these a geothermal exploration program has been launched in two sectors - Manikaran and Kasol. This field lies to southwest of the Central Crystalline axis where profuse igneous activity has taken place during Tertiary Times. This activity appears to be the main source of heat supply to the field, although contribution of some-heat through radioactive disintegration can not be ruled out. A tear fault with one kilometre displacement, picked up in the Parbati Valley, and fractures related to it may be providing the ultimate major channels for the upward movement of the hot fluids while joints in the country rock serve as immediate channels for these fluids. Spontaneous polarisation and resistivity geophysical surveys pointed to the presence of some significant zones of thermal activity and possible shallow sub-surface channels for movement of thermal fluids at Manikaran whereas resistivity surveys pointed to the existence of shallow hot zone at Kasol. Surface manifestations of thermal activity at Manikaran and Kasol are in the form of hot springs recording temperatures from 37 C to 96 C. The base temperatures of thermal fluids of Manikaran sector as calculated from Na-K-Ca and silica thermometry comes to 197 to 203 C and 131 to 138 C respectively. The average geothermal gradients in the drill holes at Manikaran vary from .0.12 C/m to .14 C/m in the depth range 0-76 m. and at Kasol from +0.16 C to +1.25 C/m in the depth ranges of 0 to 40 m. Beyond these depths reversal of gradients is noticed Title: Geothermal Exploration of the Parbati Valley Geothermal Field, Kulu District, Himachal Pradesh, India Author: Jangi, B.L. The Parbati Valley Geothermal Field is divided into five sectors and out of these a geothermal exploration program has been launched in two sectors - Manikaran and Kasol. This field lies to southwest of the Central Crystalline axis where profuse igneous activity has taken place during Tertiary Times. This activity appears to be the main source of heat supply to the field, although contribution of some-heat through radioactive disintegration can not be ruled out. A tear fault with one kilometre displacement, picked up in the Parbati Valley, and fractures related to it may be providing the ultimate major channels for the upward movement of the hot fluids while joints in the country rock serve as immediate channels for these fluids. Spontaneous polarisation and resistivity geophysical surveys pointed to the presence of some significant zones of thermal activity and possible shallow sub-surface channels for movement of thermal fluids at Manikaran whereas resistivity surveys pointed to the existence of shallow hot zone at Kasol. Surface manifestations of thermal activity at Manikaran and Kasol are in the form of hot springs recording temperatures from 37 C to 96 C. The base temperatures of thermal fluids of Manikaran sector as calculated from Na-K-Ca and silica thermometry comes to 197 to 203 C and 131 to 138 C respectively. The average geothermal gradients in the drill holes at Manikaran vary from .0.12 C/m to .14 C/m in the depth range 0-76 m. and at Kasol from +0.16 C to +1.25 C/m in the depth ranges of 0 to 40 m. Beyond these depths reversal of gradients is noticed Close

• 16. [Image] Geological and Geophysical Study of the Origin of the Warm Springs in Bath County, Virginia. Final Report, June 1, 1975--April 30, 1976

  	The results of heat flow determinations and a reconnaissance dipole electrical resistivity survey in Bath County are described. A geologic map was compiled based on published maps and supported by reconnaissance ...
  	Citation × Citation Citation Abstract Copy Title: Geological and Geophysical Study of the Origin of the Warm Springs in Bath County, Virginia. Final Report, June 1, 1975--April 30, 1976 Author: Costain, J.K. Year: 1976 The results of heat flow determinations and a reconnaissance dipole electrical resistivity survey in Bath County are described. A geologic map was compiled based on published maps and supported by reconnaissance geologic mapping in areas where published maps were not available. A regional bipole--dipole electrical resistivity survey was made in order to detect the presence of resistivity lows that might be associated with a geothermal system at depth. A single hole was drilled to a depth of approximately 300 m (approx. 1000 feet) to obtain a heat flow value that is representative of the area. The data were used to attempt to arrive at a model that unambiguously explains the origin of the thermal springs Title: Geological and Geophysical Study of the Origin of the Warm Springs in Bath County, Virginia. Final Report, June 1, 1975--April 30, 1976 Author: Costain, J.K. Year: 1976 The results of heat flow determinations and a reconnaissance dipole electrical resistivity survey in Bath County are described. A geologic map was compiled based on published maps and supported by reconnaissance geologic mapping in areas where published maps were not available. A regional bipole--dipole electrical resistivity survey was made in order to detect the presence of resistivity lows that might be associated with a geothermal system at depth. A single hole was drilled to a depth of approximately 300 m (approx. 1000 feet) to obtain a heat flow value that is representative of the area. The data were used to attempt to arrive at a model that unambiguously explains the origin of the thermal springs Close

• 17. [Image] Low-Temperature Geothermal Reservoir Site Evaluation in Arizona. Quarterly Progress Report, August 1, 1977--October 31, 1977

  	Progress in the development of a cost-effective exploration program for low- to moderate-temperature geothermal resources is reported. As part of this program two or three demonstration projects in Arizona ...
  	Citation × Citation Citation Abstract Copy Title: Low-Temperature Geothermal Reservoir Site Evaluation in Arizona. Quarterly Progress Report, August 1, 1977--October 31, 1977 Author: Hahman, W.R. Sr. Year: 1977 Progress in the development of a cost-effective exploration program for low- to moderate-temperature geothermal resources is reported. As part of this program two or three demonstration projects in Arizona will be brought on stream. The site-specific exploration, evaluation and development program as well as the state wide reconnaissance exploration program is continuing. The compilation of data for a geothermal energy resource map of Arizona has commenced. Geological field work was directed towards obtaining a broad overview of Arizona geology and regional reconnaissance in the Springerville - St. Johns area. All outside projects are on schedule and the Landsat lineament map and report have been completed Title: Low-Temperature Geothermal Reservoir Site Evaluation in Arizona. Quarterly Progress Report, August 1, 1977--October 31, 1977 Author: Hahman, W.R. Sr. Year: 1977 Progress in the development of a cost-effective exploration program for low- to moderate-temperature geothermal resources is reported. As part of this program two or three demonstration projects in Arizona will be brought on stream. The site-specific exploration, evaluation and development program as well as the state wide reconnaissance exploration program is continuing. The compilation of data for a geothermal energy resource map of Arizona has commenced. Geological field work was directed towards obtaining a broad overview of Arizona geology and regional reconnaissance in the Springerville - St. Johns area. All outside projects are on schedule and the Landsat lineament map and report have been completed Close

• 18. [Image] The Marysville, Montana Geothermal Project (Revised)

  	The object of the Marysville Geothermal Project is to investigate a region of abnormally high geothermal heat flow near Marysville, MT, about 20 miles northwest of Helena. The research should determine ...
  	Citation × Citation Citation Abstract Copy Title: The Marysville, Montana Geothermal Project (Revised) Author: McSpadden, W.R. Year: 1974 The object of the Marysville Geothermal Project is to investigate a region of abnormally high geothermal heat flow near Marysville, MT, about 20 miles northwest of Helena. The research should determine the nature and size of the resource, how the energy might be extracted, the potential monetary value of the energy, and how similar resources elsewhere might be located. The heat source was expected to be a granitic pluton or magmatic intrusion, 10,000 to 40,000 years old, with temperatures in the range of 300 to 500°C. Originally it was thought that the pluton was at relatively shallow depths, but at present its depth and exact location are unknown Title: The Marysville, Montana Geothermal Project (Revised) Author: McSpadden, W.R. Year: 1974 The object of the Marysville Geothermal Project is to investigate a region of abnormally high geothermal heat flow near Marysville, MT, about 20 miles northwest of Helena. The research should determine the nature and size of the resource, how the energy might be extracted, the potential monetary value of the energy, and how similar resources elsewhere might be located. The heat source was expected to be a granitic pluton or magmatic intrusion, 10,000 to 40,000 years old, with temperatures in the range of 300 to 500°C. Originally it was thought that the pluton was at relatively shallow depths, but at present its depth and exact location are unknown Close

• 19. [Image] Downhole Electrical Detection of Hydraulic Fractures in GT-2 and EE-1

  	Electrical geophysical methods including mise a la masse and self-potential (SP) for determination of hydraulic fracture characteristics were used at the hot dry rock geothermal project. Electrical and ...
  	Citation × Citation Citation Abstract Copy Title: Downhole Electrical Detection of Hydraulic Fractures in GT-2 and EE-1 Author: Kintzinger, P.R. Year: 1977 Electrical geophysical methods including mise a la masse and self-potential (SP) for determination of hydraulic fracture characteristics were used at the hot dry rock geothermal project. Electrical and induction logs indicated that the resistivity contrast between the granite and 200/sup 0/C water at the 2926-m (9600-ft) depth is a factor of 1000 or more. Thus the water in a hydraulic fracture, formed to connect two adjacent deep holes, is a good conductor compared to the confining granite. Mise a la masse-type measurements were made to help determine the characteristics for hydraulic fractures formed in each of the two geothermal holes GT-2 and EE-1. Once a hydraulic fracture has been formed, mise a la masse effects are obtained both with the fracture pressurized above hydrostatic and when depressurized to hydrostatic. This indicates that once the fracture has been created, enough natural propping exists that a conductive zone persists even when the fracture is deflated. A fracture was formed in a 18-m (60-ft) zone immediately below 1957 m (6420 ft) in EE-1. Later a set of SP logs was run in this zone with no pressure, with pressure building, with pressure decreasing, and again with the fracture depressurized. Results show that during times of change of parameters in hydraulically fractured regions in the hole, natural SP logging helps to determine the position of the fracture. However, after a fracture has come to equilibrium with fluid parameters such as temperature, pressure, salinity, and pH, an effect of the fracture may not be evident. Self-potential logs provide an excellent method for locating the bottom of steel casing that has been set in the hole Title: Downhole Electrical Detection of Hydraulic Fractures in GT-2 and EE-1 Author: Kintzinger, P.R. Year: 1977 Electrical geophysical methods including mise a la masse and self-potential (SP) for determination of hydraulic fracture characteristics were used at the hot dry rock geothermal project. Electrical and induction logs indicated that the resistivity contrast between the granite and 200/sup 0/C water at the 2926-m (9600-ft) depth is a factor of 1000 or more. Thus the water in a hydraulic fracture, formed to connect two adjacent deep holes, is a good conductor compared to the confining granite. Mise a la masse-type measurements were made to help determine the characteristics for hydraulic fractures formed in each of the two geothermal holes GT-2 and EE-1. Once a hydraulic fracture has been formed, mise a la masse effects are obtained both with the fracture pressurized above hydrostatic and when depressurized to hydrostatic. This indicates that once the fracture has been created, enough natural propping exists that a conductive zone persists even when the fracture is deflated. A fracture was formed in a 18-m (60-ft) zone immediately below 1957 m (6420 ft) in EE-1. Later a set of SP logs was run in this zone with no pressure, with pressure building, with pressure decreasing, and again with the fracture depressurized. Results show that during times of change of parameters in hydraulically fractured regions in the hole, natural SP logging helps to determine the position of the fracture. However, after a fracture has come to equilibrium with fluid parameters such as temperature, pressure, salinity, and pH, an effect of the fracture may not be evident. Self-potential logs provide an excellent method for locating the bottom of steel casing that has been set in the hole Close

• 20. [Image] Dipole-Dipole Resistivity Survey of a Portion of the Coso Hot Springs KGRA, Inyo County, California

  	A detailed electrical resistivity survey of 54 line-km was completed at the Coso Hot Springs KGRA in September 1977. This survey has defined a bedrock resistivity low at least 4 sq mi (10 sq km) in extent ...
  	Citation × Citation Citation Abstract Copy Title: Dipole-Dipole Resistivity Survey of a Portion of the Coso Hot Springs KGRA, Inyo County, California Author: Fox, R.C. Year: 1978 A detailed electrical resistivity survey of 54 line-km was completed at the Coso Hot Springs KGRA in September 1977. This survey has defined a bedrock resistivity low at least 4 sq mi (10 sq km) in extent associated with the geothermal system at Coso. The boundaries of this low are generally well defined to the north and west but not as well to the south where an approximate southern limit has been determined. The bedrock resistivity low merges with an observed resistivity low over gravel fill east of Coso Hot Springs. A complex horizontal and vertical resistivity structure of the surveyed area has been defined which precludes the use of layered-earth or two-dimensional interpretive models for much of the surveyed area. In general the survey data indicate that a 10 to 20 ohm-meter zone extends from near surface to a depth greater than 750 meters within the geothermal system. This zone is bordered to the north and west by bedrock resistivities greater than 200 ohm-meters and to the south by bedrock resistivities greater than 50 ohm-meters. A combination of observed increases in: (1) fracture density (higher permeability), (2) alteration (high clay content), and (3) temperatures (higher dissolved solid content of ground water) within the bedrock low explain its presence Title: Dipole-Dipole Resistivity Survey of a Portion of the Coso Hot Springs KGRA, Inyo County, California Author: Fox, R.C. Year: 1978 A detailed electrical resistivity survey of 54 line-km was completed at the Coso Hot Springs KGRA in September 1977. This survey has defined a bedrock resistivity low at least 4 sq mi (10 sq km) in extent associated with the geothermal system at Coso. The boundaries of this low are generally well defined to the north and west but not as well to the south where an approximate southern limit has been determined. The bedrock resistivity low merges with an observed resistivity low over gravel fill east of Coso Hot Springs. A complex horizontal and vertical resistivity structure of the surveyed area has been defined which precludes the use of layered-earth or two-dimensional interpretive models for much of the surveyed area. In general the survey data indicate that a 10 to 20 ohm-meter zone extends from near surface to a depth greater than 750 meters within the geothermal system. This zone is bordered to the north and west by bedrock resistivities greater than 200 ohm-meters and to the south by bedrock resistivities greater than 50 ohm-meters. A combination of observed increases in: (1) fracture density (higher permeability), (2) alteration (high clay content), and (3) temperatures (higher dissolved solid content of ground water) within the bedrock low explain its presence Close