Oregon Explorer CrossSearch Search Results

Search

You searched for: Start Over Temperature Remove constraint Temperature Subject FLUID FLOW Remove constraint Subject: FLUID FLOW Subject GEOTHERMAL ENERGY Remove constraint Subject: GEOTHERMAL ENERGY Subject NORTH AMERICA Remove constraint Subject: NORTH AMERICA Subject TESTING Remove constraint Subject: TESTING Subject USA Remove constraint Subject: USA

1 - 3 of 3

Search Results

1. [Image] Testing Operations Plan: Coso Geothermal Exploratory Hole No. 1 (CGEH-1)


	Coso Geothermal Exploratory Hole No. 1 (CGEH-1) was drilled to investigate the potential of the Coso Hot Springs Known Geothermal Resource Area (KGRA) in southeastern California. Detailed background information ...
	Citation Citation Citation Abstract Copy Title: Testing Operations Plan: Coso Geothermal Exploratory Hole No. 1 (CGEH-1) Author: Nevada Operations Office; Naval Weapons Center, China Lake Year: 1978 Coso Geothermal Exploratory Hole No. 1 (CGEH-1) was drilled to investigate the potential of the Coso Hot Springs Known Geothermal Resource Area (KGRA) in southeastern California. Detailed background information is contained in the drilling plan, ''Coso Geothermal Exploratory Hole No. 1 (CGEH-1),'' NVO-184, dated June 1977. The purpose of this supplement to NVO-184 is to establish a plan of operations for testing the resource after completion of well drilling activities. Major elements of this plan include setting forth the management and organizational concept to be followed, describing the generalized site activities required and the well testing operations, and establishing schedules, environmental considerations, and technical documentation requirements. The objective of this testing is to determine the well productivity and geothermal reservoir parameters. The testing will consist of both static and dynamic measurements. The static measurements will include wellhead pressure monitoring plus downhole temperature and pressure surveys conducted with the well shut in. The dynamic measurements will include downhole and surface pressure, temperature, and flow rate data with the well producing at varying rates. Two types of dynamic tests are contemplated; the first utilizing the James Method and the second utilizing a separator test system, if justified by an evaluation of the resource potential Title: Testing Operations Plan: Coso Geothermal Exploratory Hole No. 1 (CGEH-1) Author: Nevada Operations Office; Naval Weapons Center, China Lake Year: 1978 Coso Geothermal Exploratory Hole No. 1 (CGEH-1) was drilled to investigate the potential of the Coso Hot Springs Known Geothermal Resource Area (KGRA) in southeastern California. Detailed background information is contained in the drilling plan, ''Coso Geothermal Exploratory Hole No. 1 (CGEH-1),'' NVO-184, dated June 1977. The purpose of this supplement to NVO-184 is to establish a plan of operations for testing the resource after completion of well drilling activities. Major elements of this plan include setting forth the management and organizational concept to be followed, describing the generalized site activities required and the well testing operations, and establishing schedules, environmental considerations, and technical documentation requirements. The objective of this testing is to determine the well productivity and geothermal reservoir parameters. The testing will consist of both static and dynamic measurements. The static measurements will include wellhead pressure monitoring plus downhole temperature and pressure surveys conducted with the well shut in. The dynamic measurements will include downhole and surface pressure, temperature, and flow rate data with the well producing at varying rates. Two types of dynamic tests are contemplated; the first utilizing the James Method and the second utilizing a separator test system, if justified by an evaluation of the resource potential

2. [Image] Subsurface investigations at the Roosevelt KGRA, Utah. Final report


	An investigation of the geothermal reservoir in the Roosevelt Hot Springs Known Geothermal Resource Area in Utah was carried out. The objective of this effort was to develop predictions for well production ...
	Citation Citation Citation Abstract Copy Title: Subsurface investigations at the Roosevelt KGRA, Utah. Final report Author: Butz, J. Year: 1979 An investigation of the geothermal reservoir in the Roosevelt Hot Springs Known Geothermal Resource Area in Utah was carried out. The objective of this effort was to develop predictions for well production capacities, based on data taken during field tests and through use of a computer model. In turn, the production information could then be used in design optimization and economic analyses for development of the resource under study. Flow tests of a geothermal well, Utah State 14-2, were conducted. Data consisting of pressure and temperature logs as a function of depth were obtained. Maximum recorded temperature was 503/sup 0/F (262/sup 0/C) and maximum pressure, 954 psia (6.58MPa) as measured under flow conditions. Tests were run at rates up to 580,000 lb/hr (73.3 kg/sec) total flow. The information gathered during the testing was reduced and compared to results of a predictive computer model. Reservoir conditions in the Roosevelt Hot Springs KGRA are such that two-phase flow exists in the wellbore and, in some cases, also in the reservoir itself. The computer model employed in the analysis reflects current efforts to improve the state-of-the-art in the prediction of two-phase pressure drops in vertical systems. Predictions at flowrates of up to 300,000 lb/hr (38 kg/sec) matched quite well with test data, while modeling at higher flowrates (to maximum tested) showed progressively greater deviation from test data. Cause of the observed degradation is postulated to be the movement of the flash horizon into the reservoir, due to drawdown at high flowrates; DOE/ET/28389-1 Title: Subsurface investigations at the Roosevelt KGRA, Utah. Final report Author: Butz, J. Year: 1979 An investigation of the geothermal reservoir in the Roosevelt Hot Springs Known Geothermal Resource Area in Utah was carried out. The objective of this effort was to develop predictions for well production capacities, based on data taken during field tests and through use of a computer model. In turn, the production information could then be used in design optimization and economic analyses for development of the resource under study. Flow tests of a geothermal well, Utah State 14-2, were conducted. Data consisting of pressure and temperature logs as a function of depth were obtained. Maximum recorded temperature was 503/sup 0/F (262/sup 0/C) and maximum pressure, 954 psia (6.58MPa) as measured under flow conditions. Tests were run at rates up to 580,000 lb/hr (73.3 kg/sec) total flow. The information gathered during the testing was reduced and compared to results of a predictive computer model. Reservoir conditions in the Roosevelt Hot Springs KGRA are such that two-phase flow exists in the wellbore and, in some cases, also in the reservoir itself. The computer model employed in the analysis reflects current efforts to improve the state-of-the-art in the prediction of two-phase pressure drops in vertical systems. Predictions at flowrates of up to 300,000 lb/hr (38 kg/sec) matched quite well with test data, while modeling at higher flowrates (to maximum tested) showed progressively greater deviation from test data. Cause of the observed degradation is postulated to be the movement of the flash horizon into the reservoir, due to drawdown at high flowrates; DOE/ET/28389-1

3. [Image] Transient well testing in two-phase geothermal reservoirs


	A study of well test analysis techniques in two-phase geothermal reservoirs has been conducted using a three-dimensional, two-phase, wellbore and reservoir simulation model. Well tests from Cerro Prieto ...
	Citation Citation Citation Abstract Copy Title: Transient well testing in two-phase geothermal reservoirs Author: Aydelotte, S.R. Year: 1980 A study of well test analysis techniques in two-phase geothermal reservoirs has been conducted using a three-dimensional, two-phase, wellbore and reservoir simulation model. Well tests from Cerro Prieto and the Hawaiian Geothermal project have been history matched. Using these well tests as a base, the influence of reservoir permeability, porosity, thickness, and heat capacity, along with flow rate and fracturing were studied. Single and two-phase transient well test equations were used to analyze these tests with poor results due to rapidly changing fluid properties and inability to calculate the flowing steam saturation in the reservoir. The injection of cold water into the reservoir does give good data from which formation properties can be calculated. Title: Transient well testing in two-phase geothermal reservoirs Author: Aydelotte, S.R. Year: 1980 A study of well test analysis techniques in two-phase geothermal reservoirs has been conducted using a three-dimensional, two-phase, wellbore and reservoir simulation model. Well tests from Cerro Prieto and the Hawaiian Geothermal project have been history matched. Using these well tests as a base, the influence of reservoir permeability, porosity, thickness, and heat capacity, along with flow rate and fracturing were studied. Single and two-phase transient well test equations were used to analyze these tests with poor results due to rapidly changing fluid properties and inability to calculate the flowing steam saturation in the reservoir. The injection of cold water into the reservoir does give good data from which formation properties can be calculated.