Search

Search Results

• 1. [Image] Geothermal Heating System for the Children's Museum of Utah

  	The results of a study to determine the engineering and economic feasibility of using the Wasatch Hot Spring resource for space heating of the Children's Library building are presented. The Wasatch Hot ...
  	Citation × Citation Citation Abstract Copy Title: Geothermal Heating System for the Children's Museum of Utah Author: Karlsson, T. Year: 1984 The results of a study to determine the engineering and economic feasibility of using the Wasatch Hot Spring resource for space heating of the Children's Library building are presented. The Wasatch Hot Spring with a reported flow of about 63 gpm (240 l/min) at an average temperature of 104/sup 0/F is not capable of furnishing the needed heat for the Children's Museum building. The underground paths along which the thermal waters flow to their outlets at the Warm Springs Fault are not presently known. It is possible if the thermal water ascends from the deep layers of the earth along the Warm Springs Fault that increased geothermal flow at a higher temperature can be produced by drilling into the fault. Assuming that sufficient geothermal fluid quantity is produced by drilling in the area, an analysis is made of a geothermal heating system for the building based on different fluid temperatures. It is assumed that the present and planned heating systems be left intact with the gas fired boilers taking over during cold periods when the geothermal system fails to provide sufficient heat. Economic analysis shows that the geothermal system is very attractive, even for the lowest geothermal fluid temperature considered (110/sup 0/F) Title: Geothermal Heating System for the Children's Museum of Utah Author: Karlsson, T. Year: 1984 The results of a study to determine the engineering and economic feasibility of using the Wasatch Hot Spring resource for space heating of the Children's Library building are presented. The Wasatch Hot Spring with a reported flow of about 63 gpm (240 l/min) at an average temperature of 104/sup 0/F is not capable of furnishing the needed heat for the Children's Museum building. The underground paths along which the thermal waters flow to their outlets at the Warm Springs Fault are not presently known. It is possible if the thermal water ascends from the deep layers of the earth along the Warm Springs Fault that increased geothermal flow at a higher temperature can be produced by drilling into the fault. Assuming that sufficient geothermal fluid quantity is produced by drilling in the area, an analysis is made of a geothermal heating system for the building based on different fluid temperatures. It is assumed that the present and planned heating systems be left intact with the gas fired boilers taking over during cold periods when the geothermal system fails to provide sufficient heat. Economic analysis shows that the geothermal system is very attractive, even for the lowest geothermal fluid temperature considered (110/sup 0/F) Close

• 2. [Image] Advanced Design and Economic Considerations for Commercial Geothermal Power Plants at Heber and Niland, California. Final Report

  	Two separate studies, involving advanced design and economic considerations for commercial geothermal power plants using liquid-dominated hydrothermal resources, are presented. In the first study, the ...
  	Citation × Citation Citation Abstract Copy Title: Advanced Design and Economic Considerations for Commercial Geothermal Power Plants at Heber and Niland, California. Final Report Author: Bechtel Corporation Year: 1977 Two separate studies, involving advanced design and economic considerations for commercial geothermal power plants using liquid-dominated hydrothermal resources, are presented. In the first study, the effects on design, capital cost, and bus bar electric energy production cost caused by an anticipated decline in available geothermal fluid temperature over the lifetime of power plants are described. A two-stage, flashed-steam energy conversion process was used for the conceptual design of the power plants, which operate from the moderate-temperature, low-salinity reservoir at Heber, California. Plants with net capacities of 50, 100, and 200 MWe (net) were investigated. The results show that it is important to include provision for geothermal fluid temperature decline in the design of power plants to prevent loss of electric energy production capability and to reduce bus bar electric energy costs. In the second study, the technical, economic, and environmental effects of adding regeneration to a 50 MWe (net) power plant employing the multistage-flash/binary process are described. Regeneration is potentially attractive because it recovers waste heat from the turbine exhaust and uses it in the power cycle. However, the pressure drop caused by the introduction of the regenerator decreases the turbine expansion and thus decreases system performance. An innovative approach was taken in the design of the regenerator, which minimized the expected performance degradation of the turbine. The result was that the performance, capital cost, and bus bar electric energy production cost are nearly the same for the processes with and without regeneration. On the other hand, the addition of regeneration has the environmental benefits of substantially reducing heat rejection to the atmosphere and cooling tower makeup and blowdown water requirements. It also increases the temperature of the brine returned to the field for reinjection Title: Advanced Design and Economic Considerations for Commercial Geothermal Power Plants at Heber and Niland, California. Final Report Author: Bechtel Corporation Year: 1977 Two separate studies, involving advanced design and economic considerations for commercial geothermal power plants using liquid-dominated hydrothermal resources, are presented. In the first study, the effects on design, capital cost, and bus bar electric energy production cost caused by an anticipated decline in available geothermal fluid temperature over the lifetime of power plants are described. A two-stage, flashed-steam energy conversion process was used for the conceptual design of the power plants, which operate from the moderate-temperature, low-salinity reservoir at Heber, California. Plants with net capacities of 50, 100, and 200 MWe (net) were investigated. The results show that it is important to include provision for geothermal fluid temperature decline in the design of power plants to prevent loss of electric energy production capability and to reduce bus bar electric energy costs. In the second study, the technical, economic, and environmental effects of adding regeneration to a 50 MWe (net) power plant employing the multistage-flash/binary process are described. Regeneration is potentially attractive because it recovers waste heat from the turbine exhaust and uses it in the power cycle. However, the pressure drop caused by the introduction of the regenerator decreases the turbine expansion and thus decreases system performance. An innovative approach was taken in the design of the regenerator, which minimized the expected performance degradation of the turbine. The result was that the performance, capital cost, and bus bar electric energy production cost are nearly the same for the processes with and without regeneration. On the other hand, the addition of regeneration has the environmental benefits of substantially reducing heat rejection to the atmosphere and cooling tower makeup and blowdown water requirements. It also increases the temperature of the brine returned to the field for reinjection Close

• 3. [Image] Fluidized-Bed Potato Waste Drying Experiments at the Raft River Geothermal Test Site

  	A fluidized-bed dryer was built and operated at the Raft River Geothermal Test Site in south central Idaho to test the feasibility of using low-temperature (145/sup 0/C or lower) geothermal fluids as an ...
  	Citation × Citation Citation Abstract Copy Title: Fluidized-Bed Potato Waste Drying Experiments at the Raft River Geothermal Test Site Author: Cole, L.T. Year: 1980 A fluidized-bed dryer was built and operated at the Raft River Geothermal Test Site in south central Idaho to test the feasibility of using low-temperature (145/sup 0/C or lower) geothermal fluids as an energy source for drying operations. The dryer performed successfully on two potato industry waste products that had a solid content of 5 to 13%. The dried product was removed as a sand-like granular material or as fines with a flour-like texture. Test results, observations, and design recommendations are presented. Also presented is an economic evaluation for commercial-scale drying plants using either geothermal low-temperature water or oil as a heat source Title: Fluidized-Bed Potato Waste Drying Experiments at the Raft River Geothermal Test Site Author: Cole, L.T. Year: 1980 A fluidized-bed dryer was built and operated at the Raft River Geothermal Test Site in south central Idaho to test the feasibility of using low-temperature (145/sup 0/C or lower) geothermal fluids as an energy source for drying operations. The dryer performed successfully on two potato industry waste products that had a solid content of 5 to 13%. The dried product was removed as a sand-like granular material or as fines with a flour-like texture. Test results, observations, and design recommendations are presented. Also presented is an economic evaluation for commercial-scale drying plants using either geothermal low-temperature water or oil as a heat source Close

• 4. [Image] Electricity from Hot Dry Rock Geothermal Energy: Technical and Economic Issues

  	Extraction of energy from hot dry rock would make available a nearly unlimited energy source. Some of the technical problems and possible economic tradeoffs involved in a power generating system are examined ...
  	Citation × Citation Citation Abstract Copy Title: Electricity from Hot Dry Rock Geothermal Energy: Technical and Economic Issues Author: Tester, J.W. Year: 1979 Extraction of energy from hot dry rock would make available a nearly unlimited energy source. Some of the technical problems and possible economic tradeoffs involved in a power generating system are examined and possible solutions proposed. An intertemporal optimization computer model of electricity production from a hot dry rock geothermal source has been constructed. The effects of reservoir degradation, variable fluid flow rate, and drilling operations are examined to determine optimal strategies for reservoir management and necessary conditions for economic feasibility Title: Electricity from Hot Dry Rock Geothermal Energy: Technical and Economic Issues Author: Tester, J.W. Year: 1979 Extraction of energy from hot dry rock would make available a nearly unlimited energy source. Some of the technical problems and possible economic tradeoffs involved in a power generating system are examined and possible solutions proposed. An intertemporal optimization computer model of electricity production from a hot dry rock geothermal source has been constructed. The effects of reservoir degradation, variable fluid flow rate, and drilling operations are examined to determine optimal strategies for reservoir management and necessary conditions for economic feasibility Close

• 5. [Image] Heatplan User Manual 2.0

  	Heat plan 2.0 is a microcomputer program designed to provide a neighborhood-level inventory of heat demands by type of land use, and a preliminary assessment of district heating favorabilities for the ...
  	Citation × Citation Citation Abstract Copy Title: Heatplan User Manual 2.0 Author: Eliot Allen & Associates Year: 1984 Heat plan 2.0 is a microcomputer program designed to provide a neighborhood-level inventory of heat demands by type of land use, and a preliminary assessment of district heating favorabilities for the neighborhoods Title: Heatplan User Manual 2.0 Author: Eliot Allen & Associates Year: 1984 Heat plan 2.0 is a microcomputer program designed to provide a neighborhood-level inventory of heat demands by type of land use, and a preliminary assessment of district heating favorabilities for the neighborhoods Close

• 6. [Image] Geothermal Heat Use in San Bernadino Wastewater Treatment Plant Final Report

  	The material presented herein constitutes the Final Report prepared by the City of San Bernardino and its two subcontractors Science Applications, Inc. and Coulter Stewart & Associates, Inc. on the Department ...
  	Citation × Citation Citation Abstract Copy Title: Geothermal Heat Use in San Bernadino Wastewater Treatment Plant Final Report Author: Racine, W. C. Year: 1981 The material presented herein constitutes the Final Report prepared by the City of San Bernardino and its two subcontractors Science Applications, Inc. and Coulter Stewart & Associates, Inc. on the Department of Energy's Grant DE-FG03-80SF1l442 entitled, "Feasibility Study for Wastewater Treatment Utilizing Geothermal Energy in San Bernardino." The study team has developed a system for utilizing nearby low temperature geothermal energy to heat two high-rate primary anaerobic digesters at the San Bernardino Wastewater Treatment Plant. The geothermal fluid would replace the methane currently burned to fuel the digesters. A summary of the work accomplished on the feasibility study is presented in Chapter 2, “Summary and Conclusions" Title: Geothermal Heat Use in San Bernadino Wastewater Treatment Plant Final Report Author: Racine, W. C. Year: 1981 The material presented herein constitutes the Final Report prepared by the City of San Bernardino and its two subcontractors Science Applications, Inc. and Coulter Stewart & Associates, Inc. on the Department of Energy's Grant DE-FG03-80SF1l442 entitled, "Feasibility Study for Wastewater Treatment Utilizing Geothermal Energy in San Bernardino." The study team has developed a system for utilizing nearby low temperature geothermal energy to heat two high-rate primary anaerobic digesters at the San Bernardino Wastewater Treatment Plant. The geothermal fluid would replace the methane currently burned to fuel the digesters. A summary of the work accomplished on the feasibility study is presented in Chapter 2, “Summary and Conclusions" Close

• 7. [Image] Subsurface investigations at the Roosevelt KGRA, Utah. Final report

  	An investigation of the geothermal reservoir in the Roosevelt Hot Springs Known Geothermal Resource Area in Utah was carried out. The objective of this effort was to develop predictions for well production ...
  	Citation × Citation Citation Abstract Copy Title: Subsurface investigations at the Roosevelt KGRA, Utah. Final report Author: Butz, J. Year: 1979 An investigation of the geothermal reservoir in the Roosevelt Hot Springs Known Geothermal Resource Area in Utah was carried out. The objective of this effort was to develop predictions for well production capacities, based on data taken during field tests and through use of a computer model. In turn, the production information could then be used in design optimization and economic analyses for development of the resource under study. Flow tests of a geothermal well, Utah State 14-2, were conducted. Data consisting of pressure and temperature logs as a function of depth were obtained. Maximum recorded temperature was 503/sup 0/F (262/sup 0/C) and maximum pressure, 954 psia (6.58MPa) as measured under flow conditions. Tests were run at rates up to 580,000 lb/hr (73.3 kg/sec) total flow. The information gathered during the testing was reduced and compared to results of a predictive computer model. Reservoir conditions in the Roosevelt Hot Springs KGRA are such that two-phase flow exists in the wellbore and, in some cases, also in the reservoir itself. The computer model employed in the analysis reflects current efforts to improve the state-of-the-art in the prediction of two-phase pressure drops in vertical systems. Predictions at flowrates of up to 300,000 lb/hr (38 kg/sec) matched quite well with test data, while modeling at higher flowrates (to maximum tested) showed progressively greater deviation from test data. Cause of the observed degradation is postulated to be the movement of the flash horizon into the reservoir, due to drawdown at high flowrates; DOE/ET/28389-1 Title: Subsurface investigations at the Roosevelt KGRA, Utah. Final report Author: Butz, J. Year: 1979 An investigation of the geothermal reservoir in the Roosevelt Hot Springs Known Geothermal Resource Area in Utah was carried out. The objective of this effort was to develop predictions for well production capacities, based on data taken during field tests and through use of a computer model. In turn, the production information could then be used in design optimization and economic analyses for development of the resource under study. Flow tests of a geothermal well, Utah State 14-2, were conducted. Data consisting of pressure and temperature logs as a function of depth were obtained. Maximum recorded temperature was 503/sup 0/F (262/sup 0/C) and maximum pressure, 954 psia (6.58MPa) as measured under flow conditions. Tests were run at rates up to 580,000 lb/hr (73.3 kg/sec) total flow. The information gathered during the testing was reduced and compared to results of a predictive computer model. Reservoir conditions in the Roosevelt Hot Springs KGRA are such that two-phase flow exists in the wellbore and, in some cases, also in the reservoir itself. The computer model employed in the analysis reflects current efforts to improve the state-of-the-art in the prediction of two-phase pressure drops in vertical systems. Predictions at flowrates of up to 300,000 lb/hr (38 kg/sec) matched quite well with test data, while modeling at higher flowrates (to maximum tested) showed progressively greater deviation from test data. Cause of the observed degradation is postulated to be the movement of the flash horizon into the reservoir, due to drawdown at high flowrates; DOE/ET/28389-1 Close

• 8. [Image] Utilization of geothermal energy for methane production for J. A. Albertson Land and Cattle Company

  	To utilize the geothermal energy in the area of its 30,000-head cattle feedlot, J.A. Albertson Land and Cattle Co. is considering the development of an integrated geothermal/bioconversion system that would ...
  	Citation × Citation Citation Abstract Copy Title: Utilization of geothermal energy for methane production for J. A. Albertson Land and Cattle Company Author: Bissell, R.R. Year: 1980 To utilize the geothermal energy in the area of its 30,000-head cattle feedlot, J.A. Albertson Land and Cattle Co. is considering the development of an integrated geothermal/bioconversion system that would use the cattle manure as a feedstock for an anaerobic-digestion plant to produce methane plus a digester-residue cattle-feed supplement. The feedlot lies within a high-temperature gradient and heat-flow area associated with the Western Snake River basin in Malheur Co., Oregon. The three digesters designed for the process will operate mesophilically (at 98/sup 0/F) with a 20-day retention time. To make up the digesters' heat losses, the geothermal water source will need to be about 135/sup 0/F and have a flow rate of 120-240 gpm, depending on the size ultimately selected for the facility. If the digester residue replaces alfalfa hay in the cattle's current rations, its value will amount to $1.15 million/yr. Burning the methane in engine/generator sets would produce 985-1970 kW of electric power that could be either sold or used as a day-to-day substitute for the geothermal heat. An economic analysis of the system is presented; DOE/ET/27230-T2 Title: Utilization of geothermal energy for methane production for J. A. Albertson Land and Cattle Company Author: Bissell, R.R. Year: 1980 To utilize the geothermal energy in the area of its 30,000-head cattle feedlot, J.A. Albertson Land and Cattle Co. is considering the development of an integrated geothermal/bioconversion system that would use the cattle manure as a feedstock for an anaerobic-digestion plant to produce methane plus a digester-residue cattle-feed supplement. The feedlot lies within a high-temperature gradient and heat-flow area associated with the Western Snake River basin in Malheur Co., Oregon. The three digesters designed for the process will operate mesophilically (at 98/sup 0/F) with a 20-day retention time. To make up the digesters' heat losses, the geothermal water source will need to be about 135/sup 0/F and have a flow rate of 120-240 gpm, depending on the size ultimately selected for the facility. If the digester residue replaces alfalfa hay in the cattle's current rations, its value will amount to $1.15 million/yr. Burning the methane in engine/generator sets would produce 985-1970 kW of electric power that could be either sold or used as a day-to-day substitute for the geothermal heat. An economic analysis of the system is presented; DOE/ET/27230-T2 Close

• 9. [Image] Washington: A Guide to Geothermal Energy Development

  	A brief overview is given of the geological characteristics of each region of the state as they relate to potential geothermal development. Those exploration methods which can lead to the siting of a deep ...
  	Citation × Citation Citation Abstract Copy Title: Washington: A Guide to Geothermal Energy Development Author: Bloomquist, R.G. Year: 1980 A brief overview is given of the geological characteristics of each region of the state as they relate to potential geothermal development. Those exploration methods which can lead to the siting of a deep exploration well are described. Requirements and techniques needed for drilling deeper higher temperature exploration and production wells are presented. Electrical generation, direct utilization, and indirect utilization are reviewed. Economic factors of direct use projects are presented. A general guide to the regulatory framework affecting geothermal energy development is provided. The general steps necessary to gain access to explore, develop, distribute, and use geothermal resources are outlined (MHR) Title: Washington: A Guide to Geothermal Energy Development Author: Bloomquist, R.G. Year: 1980 A brief overview is given of the geological characteristics of each region of the state as they relate to potential geothermal development. Those exploration methods which can lead to the siting of a deep exploration well are described. Requirements and techniques needed for drilling deeper higher temperature exploration and production wells are presented. Electrical generation, direct utilization, and indirect utilization are reviewed. Economic factors of direct use projects are presented. A general guide to the regulatory framework affecting geothermal energy development is provided. The general steps necessary to gain access to explore, develop, distribute, and use geothermal resources are outlined (MHR) Close

• 10. [Image] Economic factors relevant for electric power produced from hot dry rock geothermal resources: a case study for the Fenton Hill, New Mexico, area

  	The case study described here concerns an HDR system which provides geothermal fluids for a hypothetical electric plant located in the Fenton Hill area in New Mexico's Jemez Mountains. Primary concern ...
  	Citation × Citation Citation Abstract Copy Title: Economic factors relevant for electric power produced from hot dry rock geothermal resources: a case study for the Fenton Hill, New Mexico, area Author: Cummings, R.G Year: 1979 The case study described here concerns an HDR system which provides geothermal fluids for a hypothetical electric plant located in the Fenton Hill area in New Mexico's Jemez Mountains. Primary concern is focused on the implications of differing drilling conditions, as reflected by costs, and differing risk environments for the potential commercialization of an HDR system. Drilling costs for best, medium and worst drilling conditions are taken from a recent study of drilling costs for HDR systems. Differing risk environments are represented by differing rate-of-return requirements on stocks and interest on bonds which the HDR system is assumed to pay; rate of return/interest combinations considered are 6%/3%, 9%/6%, 12%/9% and 15%/12%. The method of analysis used here is that of determining the minimum busbar cost for electricity for this case study wherein all costs are expressed in annual equivalent terms. The minimum cost design for the electric generating plant is determined jointly with the minimum cost design for the HDR system. The interdependence between minimum cost designs for the plant and HDR system is given specific attention; the optimum design temperature for the plant is shown here to be lower than one might expect for conventional power plants - in the range 225/sup 0/ to 265/sup 0/C. Major results from the analyses of HDR-produced electricity in the Fenton Hill area are as follows. With real, inflation-free debt/equity rates of 6% and 9%, respectively, the minimum busbar cost is shown to lie in the range 18 to 29 mills/kwh. When real debt/equity rates rise to 12% and 15%, busbar costs rise to 24 to 39 mills/kwh.; DOE/ET/27017-T1 Title: Economic factors relevant for electric power produced from hot dry rock geothermal resources: a case study for the Fenton Hill, New Mexico, area Author: Cummings, R.G Year: 1979 The case study described here concerns an HDR system which provides geothermal fluids for a hypothetical electric plant located in the Fenton Hill area in New Mexico's Jemez Mountains. Primary concern is focused on the implications of differing drilling conditions, as reflected by costs, and differing risk environments for the potential commercialization of an HDR system. Drilling costs for best, medium and worst drilling conditions are taken from a recent study of drilling costs for HDR systems. Differing risk environments are represented by differing rate-of-return requirements on stocks and interest on bonds which the HDR system is assumed to pay; rate of return/interest combinations considered are 6%/3%, 9%/6%, 12%/9% and 15%/12%. The method of analysis used here is that of determining the minimum busbar cost for electricity for this case study wherein all costs are expressed in annual equivalent terms. The minimum cost design for the electric generating plant is determined jointly with the minimum cost design for the HDR system. The interdependence between minimum cost designs for the plant and HDR system is given specific attention; the optimum design temperature for the plant is shown here to be lower than one might expect for conventional power plants - in the range 225/sup 0/ to 265/sup 0/C. Major results from the analyses of HDR-produced electricity in the Fenton Hill area are as follows. With real, inflation-free debt/equity rates of 6% and 9%, respectively, the minimum busbar cost is shown to lie in the range 18 to 29 mills/kwh. When real debt/equity rates rise to 12% and 15%, busbar costs rise to 24 to 39 mills/kwh.; DOE/ET/27017-T1 Close