Search

Search Results

• 1. [Image] Steady-State and Transient Wellbore Temperatures during Drilling

  	An extensive literature search was made to locate technical publications and computer programs relating to wellbore temperatures during drilling operations. The search confirmed the need for knowledge ...
  	Citation × Citation Citation Abstract Copy Title: Steady-State and Transient Wellbore Temperatures during Drilling Author: McDonald, W.J. Year: 1976 An extensive literature search was made to locate technical publications and computer programs relating to wellbore temperatures during drilling operations. The search confirmed the need for knowledge of transient and steady state circulating temperatures in the design of geothermal bits. Two approaches were used in calculating borehole temperatures. The steady state solution of Holmes and Swift was programmed and 2100 cases calculated for various borehole configurations. For transient temperature studies, calculations were made for ten borehole configurations. These calculations help emphasize the need for better high temperature bit performance and improved engineering procedures in drilling. The conclusions and recommendations are based on latest available technology for calculating wellbore temperatures Title: Steady-State and Transient Wellbore Temperatures during Drilling Author: McDonald, W.J. Year: 1976 An extensive literature search was made to locate technical publications and computer programs relating to wellbore temperatures during drilling operations. The search confirmed the need for knowledge of transient and steady state circulating temperatures in the design of geothermal bits. Two approaches were used in calculating borehole temperatures. The steady state solution of Holmes and Swift was programmed and 2100 cases calculated for various borehole configurations. For transient temperature studies, calculations were made for ten borehole configurations. These calculations help emphasize the need for better high temperature bit performance and improved engineering procedures in drilling. The conclusions and recommendations are based on latest available technology for calculating wellbore temperatures Close

• 2. [Image] C. D. Hopkins, et al. , No. 2. Geothermal Well-Of-Opportunity, Wayne County, Georgia. Operational Report

  	An oil and gas exploration well, located near Jesup in Wayne County, Georgia (lat. 31/sup 0/32' N, long. 81/sup 0/43' W), was deepened and used for geothermal temperature-gradient measurements. The well ...
  	Citation × Citation Citation Abstract Copy Title: C. D. Hopkins, et al. , No. 2. Geothermal Well-Of-Opportunity, Wayne County, Georgia. Operational Report Author: Lohse, A. Year: 1978 An oil and gas exploration well, located near Jesup in Wayne County, Georgia (lat. 31/sup 0/32' N, long. 81/sup 0/43' W), was deepened and used for geothermal temperature-gradient measurements. The well was drilled from 4,009 to 4,341 feet, then diamond cored to 4,371 feet, 28 feet of core being obtained for analysis. After logging by the U.S.G.S. District Groundwater Office in Atlanta, the well was terminated with 3/sup 1///sub 2/'' tubing to 4,386 feet. The bottom-hole temperature was determined to be 60/sup 0/C (140/sup 0/F) at 1,331 meters (4,365 feet). Over the interval 47 to 1,331 meters (154 to 4,365 feet) the least-squares temperature gradient was 29.3 +- 0.14 /sup 0/C/km (1.61 +- 0.25 /sup 0/F/100 ft) Title: C. D. Hopkins, et al. , No. 2. Geothermal Well-Of-Opportunity, Wayne County, Georgia. Operational Report Author: Lohse, A. Year: 1978 An oil and gas exploration well, located near Jesup in Wayne County, Georgia (lat. 31/sup 0/32' N, long. 81/sup 0/43' W), was deepened and used for geothermal temperature-gradient measurements. The well was drilled from 4,009 to 4,341 feet, then diamond cored to 4,371 feet, 28 feet of core being obtained for analysis. After logging by the U.S.G.S. District Groundwater Office in Atlanta, the well was terminated with 3/sup 1///sub 2/'' tubing to 4,386 feet. The bottom-hole temperature was determined to be 60/sup 0/C (140/sup 0/F) at 1,331 meters (4,365 feet). Over the interval 47 to 1,331 meters (154 to 4,365 feet) the least-squares temperature gradient was 29.3 +- 0.14 /sup 0/C/km (1.61 +- 0.25 /sup 0/F/100 ft) Close

• 3. [Image] Diesel Heat Pump for District Heating Plants and for the Heating of Large Housing Blocks

  	The aim of this project is to investigate technical, economic, and environmental aspects of large diesel driven heat pump plants for district heating and for central heating of large buildings
  	Citation × Citation Citation Abstract Copy Title: Diesel Heat Pump for District Heating Plants and for the Heating of Large Housing Blocks Author: Petersen, B. Year: 1980 The aim of this project is to investigate technical, economic, and environmental aspects of large diesel driven heat pump plants for district heating and for central heating of large buildings Title: Diesel Heat Pump for District Heating Plants and for the Heating of Large Housing Blocks Author: Petersen, B. Year: 1980 The aim of this project is to investigate technical, economic, and environmental aspects of large diesel driven heat pump plants for district heating and for central heating of large buildings Close

• 4. [Image] Annual Report on the Project to Design and Experimentally Test an Improved Geothermal Drill Bit

  	Progress is reported in a research and development program to design, build, and test an improved geothermal drill bit. The major tasks of the Phase I effort are entitled: failure mechanisms of existing ...
  	Citation × Citation Citation Abstract Copy Title: Annual Report on the Project to Design and Experimentally Test an Improved Geothermal Drill Bit Author: Barker, L.M. Year: 1976 Progress is reported in a research and development program to design, build, and test an improved geothermal drill bit. The major tasks of the Phase I effort are entitled: failure mechanisms of existing bits; new steels and new bearing design; and new seals and lubricants. It appears that a significant gain in drill-bit life can be attained by the use of higher-temperature steels which retain more hardness at temperatures above 260/sup 0/C (500/sup 0/F). Such steels are available, and two research bits of high-temperature steels were made and will shortly be tested in a laboratory-simulated full-scale geothermal drilling environment. Two control bits of the same design, but made with conventional drill bit steels, were also obtained for identical laboratory test runs, so that the performance of the research bits can be meaningfully assessed. Base-line properties of the steels, such as hardness and fracture toughness as functions of temperature, are being measured to further assess the value of the high-temperature steels selected for the research bits. A geothermal test vessel was designed and fabricated in which the full-scale drill bits will be tested. The vessel is capable of temperature to 427/sup 0/C (800/sup 0/F) and pressures to 35 MPa (5,000 psi). Seal and lubrication designs were studied, and the state of the art in high-temperature seals and lubricants was assessed. Some candidate seals and lubricants have been obtained for testing, and others are being procured. In addition, a seal test vessel has been designed and will soon be completed which can simulate the geothermal drilling environment in full-scale testing of seal and lubricant designs and materials. (JGB) Title: Annual Report on the Project to Design and Experimentally Test an Improved Geothermal Drill Bit Author: Barker, L.M. Year: 1976 Progress is reported in a research and development program to design, build, and test an improved geothermal drill bit. The major tasks of the Phase I effort are entitled: failure mechanisms of existing bits; new steels and new bearing design; and new seals and lubricants. It appears that a significant gain in drill-bit life can be attained by the use of higher-temperature steels which retain more hardness at temperatures above 260/sup 0/C (500/sup 0/F). Such steels are available, and two research bits of high-temperature steels were made and will shortly be tested in a laboratory-simulated full-scale geothermal drilling environment. Two control bits of the same design, but made with conventional drill bit steels, were also obtained for identical laboratory test runs, so that the performance of the research bits can be meaningfully assessed. Base-line properties of the steels, such as hardness and fracture toughness as functions of temperature, are being measured to further assess the value of the high-temperature steels selected for the research bits. A geothermal test vessel was designed and fabricated in which the full-scale drill bits will be tested. The vessel is capable of temperature to 427/sup 0/C (800/sup 0/F) and pressures to 35 MPa (5,000 psi). Seal and lubrication designs were studied, and the state of the art in high-temperature seals and lubricants was assessed. Some candidate seals and lubricants have been obtained for testing, and others are being procured. In addition, a seal test vessel has been designed and will soon be completed which can simulate the geothermal drilling environment in full-scale testing of seal and lubricant designs and materials. (JGB) Close

• 5. [Image] Idaho Geothermal Commercialization Planning, Semi-Annual Progress Report, January 1, 1979 - June 30, 1979

  	This report is a summary of the task accomplished during the first six months of the cooperative agreement between the U.S. Department of Energy and the Idaho Office of Energy. The report concentrates ...
  	Citation × Citation Citation Abstract Copy Title: Idaho Geothermal Commercialization Planning, Semi-Annual Progress Report, January 1, 1979 - June 30, 1979 Author: McClain, D.W. Year: 1979 This report is a summary of the task accomplished during the first six months of the cooperative agreement between the U.S. Department of Energy and the Idaho Office of Energy. The report concentrates on geothermal resource data, regional and local development plans, energy, and economic factors and institutional factors Title: Idaho Geothermal Commercialization Planning, Semi-Annual Progress Report, January 1, 1979 - June 30, 1979 Author: McClain, D.W. Year: 1979 This report is a summary of the task accomplished during the first six months of the cooperative agreement between the U.S. Department of Energy and the Idaho Office of Energy. The report concentrates on geothermal resource data, regional and local development plans, energy, and economic factors and institutional factors Close

• 6. [Image] California Laws for Conservation of Geothermal Resources

  	California laws for the conservation of geothermal resources. This covers rules for drilling geothermal wells
  	Citation × Citation Citation Abstract Copy Title: California Laws for Conservation of Geothermal Resources Author: State of California Year: 1978 California laws for the conservation of geothermal resources. This covers rules for drilling geothermal wells Title: California Laws for Conservation of Geothermal Resources Author: State of California Year: 1978 California laws for the conservation of geothermal resources. This covers rules for drilling geothermal wells Close

• 7. [Image] California Laws for Conservation of Geothermal Resources, January 1989

  	California laws for the conservation of geothermal resources. This covers rules for drilling geothermal wells
  	Citation × Citation Citation Abstract Copy Title: California Laws for Conservation of Geothermal Resources, January 1989 Author: State of California Year: 1989 California laws for the conservation of geothermal resources. This covers rules for drilling geothermal wells Title: California Laws for Conservation of Geothermal Resources, January 1989 Author: State of California Year: 1989 California laws for the conservation of geothermal resources. This covers rules for drilling geothermal wells Close

• 8. [Image] Geological and Geophysical Analysis of Coso Geothermal Exploration Hole No. 1 (CGEH-1), Coso Hot Springs KGRA, California

  	The Coso Geothermal Exploration Hole number one (CGEH-1) was drilled in the Coso Hot Springs KGRA, California from September 2 to December 2, 1977. Chip samples were collected at ten foot intervals and ...
  	Citation × Citation Citation Abstract Copy Title: Geological and Geophysical Analysis of Coso Geothermal Exploration Hole No. 1 (CGEH-1), Coso Hot Springs KGRA, California Author: Galbraith, R.M. Year: 1978 The Coso Geothermal Exploration Hole number one (CGEH-1) was drilled in the Coso Hot Springs KGRA, California from September 2 to December 2, 1977. Chip samples were collected at ten foot intervals and extensive geophysical logging surveys were conducted to document the geologic character of the geothermal system as penetrated by CGEH-1. The major rock units encountered include a mafic metamorphic sequence and a leucogranite which intruded the metamorphic rocks. Only weak hydrothermal alteration was noted in these rocks. Drillhole surveys and drilling rate data indicate that the geothermal system is structurally controlled and that the drillhole itself was strongly influenced by structural zones. Water chemistry indicates that this geothermal resource is a hot-water rather than a vapor-dominated system. Several geophysical logs were employed to characterize the drillhole geology. The natural gamma and neutron porosity logs indicate gross rock type and the acoustic logs indicate fractured rock and potentially permeable zones. A series of temperature logs run as a function of time during and after the completion of Drilling were most Useful in delineating the zones of maximum heat flux. Convective heat flow and temperatures greater than 350/sup 0/F appear to occur only along an open fracture system encountered between depths of 1850 and 2775 feet. Temperature logs indicate a negative thermal gradient below 3000 feet Title: Geological and Geophysical Analysis of Coso Geothermal Exploration Hole No. 1 (CGEH-1), Coso Hot Springs KGRA, California Author: Galbraith, R.M. Year: 1978 The Coso Geothermal Exploration Hole number one (CGEH-1) was drilled in the Coso Hot Springs KGRA, California from September 2 to December 2, 1977. Chip samples were collected at ten foot intervals and extensive geophysical logging surveys were conducted to document the geologic character of the geothermal system as penetrated by CGEH-1. The major rock units encountered include a mafic metamorphic sequence and a leucogranite which intruded the metamorphic rocks. Only weak hydrothermal alteration was noted in these rocks. Drillhole surveys and drilling rate data indicate that the geothermal system is structurally controlled and that the drillhole itself was strongly influenced by structural zones. Water chemistry indicates that this geothermal resource is a hot-water rather than a vapor-dominated system. Several geophysical logs were employed to characterize the drillhole geology. The natural gamma and neutron porosity logs indicate gross rock type and the acoustic logs indicate fractured rock and potentially permeable zones. A series of temperature logs run as a function of time during and after the completion of Drilling were most Useful in delineating the zones of maximum heat flux. Convective heat flow and temperatures greater than 350/sup 0/F appear to occur only along an open fracture system encountered between depths of 1850 and 2775 feet. Temperature logs indicate a negative thermal gradient below 3000 feet Close

• 9. [Image] Idaho Geothermal Report, Ketchum, Idaho, Site Specifc Development Analysis

  	This study summarizes known information, estimates economic risk, and outlines institutional parameters which are site specific to the Blaine County area
  	Citation × Citation Citation Abstract Copy Title: Idaho Geothermal Report, Ketchum, Idaho, Site Specifc Development Analysis Author: Eastlake, W. B. Year: 1980 This study summarizes known information, estimates economic risk, and outlines institutional parameters which are site specific to the Blaine County area Title: Idaho Geothermal Report, Ketchum, Idaho, Site Specifc Development Analysis Author: Eastlake, W. B. Year: 1980 This study summarizes known information, estimates economic risk, and outlines institutional parameters which are site specific to the Blaine County area Close

• 10. [Image] Geological and Geophysical Analysis of Coso Geothermal Exploration Hole No. 1 (CGEH-1), Coso Hot Springs KGRA, California

  	The Coso Geothermal Exploration Hole number one (CGEH-1) was drilled in the Coso Hot Springs KGRA, California, from September 2 to December 2, 1977. Chip samples were collected at ten foot intervals and ...
  	Citation × Citation Citation Abstract Copy Title: Geological and Geophysical Analysis of Coso Geothermal Exploration Hole No. 1 (CGEH-1), Coso Hot Springs KGRA, California Author: Galbraith, R.M. Year: 1978 The Coso Geothermal Exploration Hole number one (CGEH-1) was drilled in the Coso Hot Springs KGRA, California, from September 2 to December 2, 1977. Chip samples were collected at ten foot intervals and extensive geophysical logging surveys were conducted to document the geologic character of the geothermal system as penetrated by CGEH-1. The major rock units encountered include a mafic metamorphic sequence and a leucogranite which intruded the metamorphic rocks. Only weak hydrothermal alteration was noted in these rocks. Drillhole surveys and drilling rate data indicate that the geothermal system is structurally controlled and that the drillhole itself was strongly influenced by structural zones. Water chemistry indicates that this geothermal resource is a hot-water rather than a vapor-dominated system. Several geophysical logs were employed to characterize the drillhole geology. The natural gamma and neutron porosity logs indicate gross rock type and the acoustics logs indicate fractured rock and potentially permeable zones. A series of temperature logs run as a function of time during and after the completion of drilling were most useful in delineating the zones of maximum heat flux. Convective heat flow and temperatures greater than 350/sup 0/F appear to occur only along an open fracture system encountered between depths of 1850 and 2775 feet. Temperature logs indicate a negative thermal gradient below 3000 feet Title: Geological and Geophysical Analysis of Coso Geothermal Exploration Hole No. 1 (CGEH-1), Coso Hot Springs KGRA, California Author: Galbraith, R.M. Year: 1978 The Coso Geothermal Exploration Hole number one (CGEH-1) was drilled in the Coso Hot Springs KGRA, California, from September 2 to December 2, 1977. Chip samples were collected at ten foot intervals and extensive geophysical logging surveys were conducted to document the geologic character of the geothermal system as penetrated by CGEH-1. The major rock units encountered include a mafic metamorphic sequence and a leucogranite which intruded the metamorphic rocks. Only weak hydrothermal alteration was noted in these rocks. Drillhole surveys and drilling rate data indicate that the geothermal system is structurally controlled and that the drillhole itself was strongly influenced by structural zones. Water chemistry indicates that this geothermal resource is a hot-water rather than a vapor-dominated system. Several geophysical logs were employed to characterize the drillhole geology. The natural gamma and neutron porosity logs indicate gross rock type and the acoustics logs indicate fractured rock and potentially permeable zones. A series of temperature logs run as a function of time during and after the completion of drilling were most useful in delineating the zones of maximum heat flux. Convective heat flow and temperatures greater than 350/sup 0/F appear to occur only along an open fracture system encountered between depths of 1850 and 2775 feet. Temperature logs indicate a negative thermal gradient below 3000 feet Close