Search

Search Results

• 1. [Image] Study of Silica Scaling from Geothermal Brines, Final Report, November 15, 1974 - April 30, 1977

  	Condensation of silica from brines supersaturate in silicic acid was studied over a range of pH (4.5 to 6.5), temperature (75 to 105/sup 0/C), salinity, and silicic acid concentration (700 to 1200 ppM ...
  	Citation × Citation Citation Abstract Copy Title: Study of Silica Scaling from Geothermal Brines, Final Report, November 15, 1974 - April 30, 1977 Author: Makrides, A.C. Year: 1978 Condensation of silica from brines supersaturate in silicic acid was studied over a range of pH (4.5 to 6.5), temperature (75 to 105/sup 0/C), salinity, and silicic acid concentration (700 to 1200 ppM as SiO/sub 2/). The experimental technique involved analyses for molybdate-reactive silicic acid as a function of time after a supersaturated solution of Si(OH)/sub 4/ was prepared by mixing aliquots of a stock silicate solution with buffered brine. The isothermal rate of SiO/sub 2/ condensation is a strong function of supersaturation (C/Ce), pH, and salinity. The overall kinetics follow what is expected from the general theory of phase transitions. The kinetic results suggest that growth of nucleated particles is activation controlled, at least initially. The increase of condensation rate with salt content is attributed to a decrease in equilibrium solubility of SiO/sub 2/. In effect, higher salt concentrations increase supersaturation and lead to faster nucleation. Higher nucleation and growth rates are observed at higher pH's. An increase of 1 pH unit increases rates by a factor of about 10. The pH dependence is consistent with the hypothesis that SiO(OH)/sub 3//sup -/ is One of the reacting species. Temperature has little effect on condensation rate at a fixed initial silicic acid concentration. This result suggests that the increase in rate of activated steps brought about by increased temperature is essentially counterbalanced by a decrease in supersaturation (because of higher equilibrium solubility at higher temperatures). The kinetic results yield an activation energy of 17 kcal/mol for addition of silicic acid to a nucleated particle and 45 ergs/cm/sup 2/ for the interfacial energy between precipitated silica and the brine. NaCl, KCl, CaCl/sub 2/ and MgCl/sub 2/ had no specific effect on condensation rate. However, NaF had a large effect on rate; a few ppM (15 to 100) of fluoride ion accelerate condensation substantially Title: Study of Silica Scaling from Geothermal Brines, Final Report, November 15, 1974 - April 30, 1977 Author: Makrides, A.C. Year: 1978 Condensation of silica from brines supersaturate in silicic acid was studied over a range of pH (4.5 to 6.5), temperature (75 to 105/sup 0/C), salinity, and silicic acid concentration (700 to 1200 ppM as SiO/sub 2/). The experimental technique involved analyses for molybdate-reactive silicic acid as a function of time after a supersaturated solution of Si(OH)/sub 4/ was prepared by mixing aliquots of a stock silicate solution with buffered brine. The isothermal rate of SiO/sub 2/ condensation is a strong function of supersaturation (C/Ce), pH, and salinity. The overall kinetics follow what is expected from the general theory of phase transitions. The kinetic results suggest that growth of nucleated particles is activation controlled, at least initially. The increase of condensation rate with salt content is attributed to a decrease in equilibrium solubility of SiO/sub 2/. In effect, higher salt concentrations increase supersaturation and lead to faster nucleation. Higher nucleation and growth rates are observed at higher pH's. An increase of 1 pH unit increases rates by a factor of about 10. The pH dependence is consistent with the hypothesis that SiO(OH)/sub 3//sup -/ is One of the reacting species. Temperature has little effect on condensation rate at a fixed initial silicic acid concentration. This result suggests that the increase in rate of activated steps brought about by increased temperature is essentially counterbalanced by a decrease in supersaturation (because of higher equilibrium solubility at higher temperatures). The kinetic results yield an activation energy of 17 kcal/mol for addition of silicic acid to a nucleated particle and 45 ergs/cm/sup 2/ for the interfacial energy between precipitated silica and the brine. NaCl, KCl, CaCl/sub 2/ and MgCl/sub 2/ had no specific effect on condensation rate. However, NaF had a large effect on rate; a few ppM (15 to 100) of fluoride ion accelerate condensation substantially Close

• 2. [Image] Viscosity of Brines from the Salton Sea Geothermal Field, Imperial Valley, California

  	The viscosity of chemically analyzed brines from the Salton Sea Geothermal Field was measured from 5 to 90/sup 0/C at 100 kPa. Data indicate that these multicomponent solutions are slightly more viscous ...
  	Citation × Citation Citation Abstract Copy Title: Viscosity of Brines from the Salton Sea Geothermal Field, Imperial Valley, California Author: Piwinskii, A.J. Year: 1977 The viscosity of chemically analyzed brines from the Salton Sea Geothermal Field was measured from 5 to 90/sup 0/C at 100 kPa. Data indicate that these multicomponent solutions are slightly more viscous than a 3.5 molal NaCl solution in this temperature interval Title: Viscosity of Brines from the Salton Sea Geothermal Field, Imperial Valley, California Author: Piwinskii, A.J. Year: 1977 The viscosity of chemically analyzed brines from the Salton Sea Geothermal Field was measured from 5 to 90/sup 0/C at 100 kPa. Data indicate that these multicomponent solutions are slightly more viscous than a 3.5 molal NaCl solution in this temperature interval Close