Search

Search Results

• 1. [Image] Diesel Heat Pump for District Heating Plants and for the Heating of Large Housing Blocks

  	The aim of this project is to investigate technical, economic, and environmental aspects of large diesel driven heat pump plants for district heating and for central heating of large buildings
  	Citation × Citation Citation Abstract Copy Title: Diesel Heat Pump for District Heating Plants and for the Heating of Large Housing Blocks Author: Petersen, B. Year: 1980 The aim of this project is to investigate technical, economic, and environmental aspects of large diesel driven heat pump plants for district heating and for central heating of large buildings Title: Diesel Heat Pump for District Heating Plants and for the Heating of Large Housing Blocks Author: Petersen, B. Year: 1980 The aim of this project is to investigate technical, economic, and environmental aspects of large diesel driven heat pump plants for district heating and for central heating of large buildings Close

• 2. [Image] Development of the high-temperature redox electrode. Interim report ending March 1980

  	The oxidation-reduction (known as redox) electrode was studied in a pH range corresponding to that found in a CO/sub 2/-silicate buffered system at temperatures ranging from 100 to 250/sup 0/C. Oxidizing ...
  	Citation × Citation Citation Abstract Copy Title: Development of the high-temperature redox electrode. Interim report ending March 1980 Author: Danielson, M.J. Year: 1980 The oxidation-reduction (known as redox) electrode was studied in a pH range corresponding to that found in a CO/sub 2/-silicate buffered system at temperatures ranging from 100 to 250/sup 0/C. Oxidizing conditions were created by injecting oxygen; the greatest reducing conditions, by using hydrogen. The sulfur system (H/sub 2/S, HS/sup -/, S/sup 2/) was not examined at this time, but future work will include this system since it is an important component of the geothermal brine. Both a platinized platinum (Pt-Pt) and a bare platinum (Pt-foil) electrode respond to the redox environment. The response does not appear to indicate thermodynamic equilibrium with the chemical environment; instead a mixed potential response is indicated. The difference in potential between a strong oxidizing environment (0.4-ppM O/sub 2/) and a strong reducing environment (0.5-atm H/sub 2/) is typically > 1 volt at all temperatures. The magnitude of this response makes the platinum electrode a suitable sensor for continuous monitoring of the geothermal environment for oxygen intrusions. The platinized platinum redox electrode is superior to the bare platinum electrode; PNL-3377 Title: Development of the high-temperature redox electrode. Interim report ending March 1980 Author: Danielson, M.J. Year: 1980 The oxidation-reduction (known as redox) electrode was studied in a pH range corresponding to that found in a CO/sub 2/-silicate buffered system at temperatures ranging from 100 to 250/sup 0/C. Oxidizing conditions were created by injecting oxygen; the greatest reducing conditions, by using hydrogen. The sulfur system (H/sub 2/S, HS/sup -/, S/sup 2/) was not examined at this time, but future work will include this system since it is an important component of the geothermal brine. Both a platinized platinum (Pt-Pt) and a bare platinum (Pt-foil) electrode respond to the redox environment. The response does not appear to indicate thermodynamic equilibrium with the chemical environment; instead a mixed potential response is indicated. The difference in potential between a strong oxidizing environment (0.4-ppM O/sub 2/) and a strong reducing environment (0.5-atm H/sub 2/) is typically > 1 volt at all temperatures. The magnitude of this response makes the platinum electrode a suitable sensor for continuous monitoring of the geothermal environment for oxygen intrusions. The platinized platinum redox electrode is superior to the bare platinum electrode; PNL-3377 Close

• 3. [Image] Direct Application of Geothermal Energy

  	The purpose of this report is to present in a single work, an overall treatment of direct geothermal applications with an emphasis on the above ground engineering
  	Citation × Citation Citation Abstract Copy Title: Direct Application of Geothermal Energy Author: Reistad, G.M Year: 1980 The purpose of this report is to present in a single work, an overall treatment of direct geothermal applications with an emphasis on the above ground engineering Title: Direct Application of Geothermal Energy Author: Reistad, G.M Year: 1980 The purpose of this report is to present in a single work, an overall treatment of direct geothermal applications with an emphasis on the above ground engineering Close

• 4. [Image] Field Electrochemical Measurements of Corrosion Characteristics of Materials in Hypersaline Geothermal Brine

  	A flow cell (with appropriate accessories) was developed for use in short-term testing of the corrosion behavior of materials in approximately 100{sup 0}C, hypersaline geothermal brine. The apparatus was ...
  	Citation × Citation Citation Abstract Copy Title: Field Electrochemical Measurements of Corrosion Characteristics of Materials in Hypersaline Geothermal Brine Author: Harrar, J.E. Year: 1977 A flow cell (with appropriate accessories) was developed for use in short-term testing of the corrosion behavior of materials in approximately 100{sup 0}C, hypersaline geothermal brine. The apparatus was designed to accommodate commercial (Petrolite) corrosion measurement equipment and conducted experiments on-line at the Lawrence Livermore Laboratory Test Station in the Salton Sea Geothermal Field. The apparatus also permitted direct readings of corrosion potentials, solution redox potential (E{sub h}), brine flow rate, pH, and temperature. Estimates of general corrosion rates were obtained by the linear polarization resistance technique and from measurements of complete potentiodynamic polarization curves. The latter also afforded predictions of pitting susceptibilities of active-passive type materials. Twenty-two alloys (with various heat treatments) were tested and readily grouped according to general corrosion resistances in acidified hypersaline (approximately 4 M chloride) brine. Especially promising in regard to corrosion resistance-vs-cost is the series of low Cr--Mo steels. Prescaling of materials in unacidified (pH approximately 5.7) brine prior to exposure to acidified (pH 2 to 4.5) brine was found to be beneficial in reducing corrosion rates at 100{sup 0}C Title: Field Electrochemical Measurements of Corrosion Characteristics of Materials in Hypersaline Geothermal Brine Author: Harrar, J.E. Year: 1977 A flow cell (with appropriate accessories) was developed for use in short-term testing of the corrosion behavior of materials in approximately 100{sup 0}C, hypersaline geothermal brine. The apparatus was designed to accommodate commercial (Petrolite) corrosion measurement equipment and conducted experiments on-line at the Lawrence Livermore Laboratory Test Station in the Salton Sea Geothermal Field. The apparatus also permitted direct readings of corrosion potentials, solution redox potential (E{sub h}), brine flow rate, pH, and temperature. Estimates of general corrosion rates were obtained by the linear polarization resistance technique and from measurements of complete potentiodynamic polarization curves. The latter also afforded predictions of pitting susceptibilities of active-passive type materials. Twenty-two alloys (with various heat treatments) were tested and readily grouped according to general corrosion resistances in acidified hypersaline (approximately 4 M chloride) brine. Especially promising in regard to corrosion resistance-vs-cost is the series of low Cr--Mo steels. Prescaling of materials in unacidified (pH approximately 5.7) brine prior to exposure to acidified (pH 2 to 4.5) brine was found to be beneficial in reducing corrosion rates at 100{sup 0}C Close

• 5. [Image] Linear Polarization Measurements at High Temperatures in Hypersaline Geothermal Brines

  	The Bureau of Mines conducted a series of in situ linear polarization measurements in high-temperature, high-pressure hypersaline geothermal brines at the Bureau of Mines Geothermal Test Facility in the ...
  	Citation × Citation Citation Abstract Copy Title: Linear Polarization Measurements at High Temperatures in Hypersaline Geothermal Brines Author: Cramer, S.D. Year: 1978 The Bureau of Mines conducted a series of in situ linear polarization measurements in high-temperature, high-pressure hypersaline geothermal brines at the Bureau of Mines Geothermal Test Facility in the Imperial Valley of California. The measurements represented an evaluation of the linear polarization technique for obtaining instantaneous corrosion rates of materials of construction in flowing hypersaline hydrothermal fluids that rapidly form scales on exposed surfaces. A special method was devised for use with the linear polarization technique that resulted in obtaining corrosion rates for 1020 carbon steel, 316 and 430 stainless steel, titanium, various nickel-based alloys, and aluminum 6061 under strong scale-forming conditions. The measurements also provided information on scale-deposition rates in various geothermal environments. Exploratory in situ potentiostatic polarization measurements were made in the flowing brines to qualitatively determine scale-deposition effects on the electrochemical measurements Title: Linear Polarization Measurements at High Temperatures in Hypersaline Geothermal Brines Author: Cramer, S.D. Year: 1978 The Bureau of Mines conducted a series of in situ linear polarization measurements in high-temperature, high-pressure hypersaline geothermal brines at the Bureau of Mines Geothermal Test Facility in the Imperial Valley of California. The measurements represented an evaluation of the linear polarization technique for obtaining instantaneous corrosion rates of materials of construction in flowing hypersaline hydrothermal fluids that rapidly form scales on exposed surfaces. A special method was devised for use with the linear polarization technique that resulted in obtaining corrosion rates for 1020 carbon steel, 316 and 430 stainless steel, titanium, various nickel-based alloys, and aluminum 6061 under strong scale-forming conditions. The measurements also provided information on scale-deposition rates in various geothermal environments. Exploratory in situ potentiostatic polarization measurements were made in the flowing brines to qualitatively determine scale-deposition effects on the electrochemical measurements Close

• 6. [Image] Geothermal Well Downhole Heat Exchanger Design Analysis A Thesis

  	This report covers information about the use of Downhole Heat Exchangers in the Klamath Falls, OR area
  	Citation × Citation Citation Abstract Copy Title: Geothermal Well Downhole Heat Exchanger Design Analysis A Thesis Author: Kreitlow, D. K. Year: 1977 This report covers information about the use of Downhole Heat Exchangers in the Klamath Falls, OR area Title: Geothermal Well Downhole Heat Exchanger Design Analysis A Thesis Author: Kreitlow, D. K. Year: 1977 This report covers information about the use of Downhole Heat Exchangers in the Klamath Falls, OR area Close

• 7. [Image] Geothermal Progress Monitor: Report No. 17, December 1995

  	DOE is particularly concerned with reducing the costs of geothermal power generation, especially with the abundant moderate to low-temperature resources in the US. This concern is reflected in DOE`s support ...
  	Citation × Citation Citation Abstract Copy Title: Geothermal Progress Monitor: Report No. 17, December 1995 Author: Assistant Secretary for Energy and Efficiency and Renewable Energy, Geothermal Division Year: 1995 DOE is particularly concerned with reducing the costs of geothermal power generation, especially with the abundant moderate to low-temperature resources in the US. This concern is reflected in DOE`s support of a number of energy conversion projects. Projects which focus on the costs and performance of binary cycle technology include a commercial demonstration of supersaturated turbine expansions, which earlier Studies have indicated could increase the power produced per pound of fluid. Other binary cycle projects include evaluations of the performance of various working fluid mixtures and the development and testing of advanced heat rejection systems which are desperately needed in water-short geothermal areas. DOE is also investigating the applicability of flash steam technology to low-temperature resources, as an economic alternative to binary cycle systems. A low-cost, low-pressure steam turbine, selected for a grant, will be constructed to utilize fluid discharged from a flash steam plant in Nevada. Another project addresses the efficiency of high-temperature flash plants with a demonstration of the performance of the Biphase turbine which may increase the power output of such installations with no increase in fluid flow. Perhaps the most noteworthy feature of this issue of the GPM, the 17th since its inception in 1980, is the high degree of industry participation in federally-sponsored geothermal research and development. This report describes geothermal development activities Title: Geothermal Progress Monitor: Report No. 17, December 1995 Author: Assistant Secretary for Energy and Efficiency and Renewable Energy, Geothermal Division Year: 1995 DOE is particularly concerned with reducing the costs of geothermal power generation, especially with the abundant moderate to low-temperature resources in the US. This concern is reflected in DOE`s support of a number of energy conversion projects. Projects which focus on the costs and performance of binary cycle technology include a commercial demonstration of supersaturated turbine expansions, which earlier Studies have indicated could increase the power produced per pound of fluid. Other binary cycle projects include evaluations of the performance of various working fluid mixtures and the development and testing of advanced heat rejection systems which are desperately needed in water-short geothermal areas. DOE is also investigating the applicability of flash steam technology to low-temperature resources, as an economic alternative to binary cycle systems. A low-cost, low-pressure steam turbine, selected for a grant, will be constructed to utilize fluid discharged from a flash steam plant in Nevada. Another project addresses the efficiency of high-temperature flash plants with a demonstration of the performance of the Biphase turbine which may increase the power output of such installations with no increase in fluid flow. Perhaps the most noteworthy feature of this issue of the GPM, the 17th since its inception in 1980, is the high degree of industry participation in federally-sponsored geothermal research and development. This report describes geothermal development activities Close

• 8. [Image] Geothermal Loop Experimental Facility. Quarterly Report, October--December 1978

  	Since the Geothermal Loop Experimental Facility (GLEF) start-up in May, 1976, a substantial amount of information has been obtained on the operation of the plant, components, brine and steam composition, ...
  	Citation × Citation Citation Abstract Copy Title: Geothermal Loop Experimental Facility. Quarterly Report, October--December 1978 Author: Anastas, G. Year: 1979 Since the Geothermal Loop Experimental Facility (GLEF) start-up in May, 1976, a substantial amount of information has been obtained on the operation of the plant, components, brine and steam composition, production and injection wells, and the potential of the Niland Reservoir. The GLEF was modified in April, 1978, from a four stage flash/binary process to a two stage cycle for the extraction of energy from a high temperature, high salinity, liquid dominated resource. This quarterly summarizes the general operations and accomplishments of the GLEF during the period from October 1, 1978 through December 31, 1978 Title: Geothermal Loop Experimental Facility. Quarterly Report, October--December 1978 Author: Anastas, G. Year: 1979 Since the Geothermal Loop Experimental Facility (GLEF) start-up in May, 1976, a substantial amount of information has been obtained on the operation of the plant, components, brine and steam composition, production and injection wells, and the potential of the Niland Reservoir. The GLEF was modified in April, 1978, from a four stage flash/binary process to a two stage cycle for the extraction of energy from a high temperature, high salinity, liquid dominated resource. This quarterly summarizes the general operations and accomplishments of the GLEF during the period from October 1, 1978 through December 31, 1978 Close

• 9. [Image] Removal of Hydrogen Sulfide from Simulated Geothermal Brines by Reaction with Oxygen. Final Report, October 6, 1975-February 4, 1977

  	A process for controlling hydrogen sulfide emissions and corrosivity in geothermal systems has been evaluated on a small laboratory pilot plant scale and shown to be technically feasible. The hydrogen ...
  	Citation × Citation Citation Abstract Copy Title: Removal of Hydrogen Sulfide from Simulated Geothermal Brines by Reaction with Oxygen. Final Report, October 6, 1975-February 4, 1977 Author: Wilson, J.S. Year: 1977 A process for controlling hydrogen sulfide emissions and corrosivity in geothermal systems has been evaluated on a small laboratory pilot plant scale and shown to be technically feasible. The hydrogen sulfide was oxidized by oxygen injected directly into a 11.4-liter-(3-gallon)-per-minute flowing stream of simulated geothermal brine. The oxidation of the sulfide was complete at oxygen:sulfide mole ratios of 1.25:1 to 1.5:1, depending on temperature and total dissolved solids in the brine. The reaction products were free sulfur, sulfite and sulfate. The ratio of these was dependent upon the oxygen:sulfide mole ratios; but, generally, more than 80% of the sulfide was converted to sulfate, approximately 10% to free sulfur and less than 10% to sulfite Title: Removal of Hydrogen Sulfide from Simulated Geothermal Brines by Reaction with Oxygen. Final Report, October 6, 1975-February 4, 1977 Author: Wilson, J.S. Year: 1977 A process for controlling hydrogen sulfide emissions and corrosivity in geothermal systems has been evaluated on a small laboratory pilot plant scale and shown to be technically feasible. The hydrogen sulfide was oxidized by oxygen injected directly into a 11.4-liter-(3-gallon)-per-minute flowing stream of simulated geothermal brine. The oxidation of the sulfide was complete at oxygen:sulfide mole ratios of 1.25:1 to 1.5:1, depending on temperature and total dissolved solids in the brine. The reaction products were free sulfur, sulfite and sulfate. The ratio of these was dependent upon the oxygen:sulfide mole ratios; but, generally, more than 80% of the sulfide was converted to sulfate, approximately 10% to free sulfur and less than 10% to sulfite Close