Search

Search Results

• 1. [Image] Stratigraphy and Alteration, 15 Shallow Thermal Gradient Holes, Roosevelt Hot Springs KGRA and Vicinity, Millard and Beaver Counties, Utah

  	Fifteen shallow thermal gradient drill holes were recently completed by Geothermal Power Corporation (GPCR) in the vicinity of the Roosevelt Hot Springs KGRA. Five holes penetrated Tertiary granitic rocks ...
  	Citation × Citation Citation Abstract Copy Title: Stratigraphy and Alteration, 15 Shallow Thermal Gradient Holes, Roosevelt Hot Springs KGRA and Vicinity, Millard and Beaver Counties, Utah Author: Hulen, J.B. Year: 1978 Fifteen shallow thermal gradient drill holes were recently completed by Geothermal Power Corporation (GPCR) in the vicinity of the Roosevelt Hot Springs KGRA. Five holes penetrated Tertiary granitic rocks and Precambrian gneiss east of the KGRA. Seven holes completed entirely in alluvium near the southwestern corner of the KGRA encountered a near-surface marker horizon of Pleistocene pumice and perlite. Maximum calculated alluvial sedimentation rates since initial deposition of this pumice and perlite range from 1 foot in 12,500 years to 1 foot in 2,300 years. Three holes east of the Mineral Mountains penetrated late Cenozoic basaltic andesite beneath a thin veneer of alluvium. All 15 GPCR drill holes appear to be peripheral to a central zone of anomalously high thermal gradient and low resisitivity delineated by previous investigations. GPCR-8 and -14, however, are characterized by high heat flow and relatively abundant manganese oxide mineralization, which may reflect a favorable hydrologic system controlling thermal fluid flow at depth. These holes thus seem most encouraging for discovery of a deeper high-temperature geothermal resource Title: Stratigraphy and Alteration, 15 Shallow Thermal Gradient Holes, Roosevelt Hot Springs KGRA and Vicinity, Millard and Beaver Counties, Utah Author: Hulen, J.B. Year: 1978 Fifteen shallow thermal gradient drill holes were recently completed by Geothermal Power Corporation (GPCR) in the vicinity of the Roosevelt Hot Springs KGRA. Five holes penetrated Tertiary granitic rocks and Precambrian gneiss east of the KGRA. Seven holes completed entirely in alluvium near the southwestern corner of the KGRA encountered a near-surface marker horizon of Pleistocene pumice and perlite. Maximum calculated alluvial sedimentation rates since initial deposition of this pumice and perlite range from 1 foot in 12,500 years to 1 foot in 2,300 years. Three holes east of the Mineral Mountains penetrated late Cenozoic basaltic andesite beneath a thin veneer of alluvium. All 15 GPCR drill holes appear to be peripheral to a central zone of anomalously high thermal gradient and low resisitivity delineated by previous investigations. GPCR-8 and -14, however, are characterized by high heat flow and relatively abundant manganese oxide mineralization, which may reflect a favorable hydrologic system controlling thermal fluid flow at depth. These holes thus seem most encouraging for discovery of a deeper high-temperature geothermal resource Close

• 2. [Image] Geothermal Investigations in Idaho. Part 8. Heat Flow Study of the Snake River Plain Region, Idaho

  	The Snake River Plain of Idaho has recent lava flows and a large number of thermal springs and wells. A heat flow study was initiated which, together with available geological and geophysical information, ...
  	Citation × Citation Citation Abstract Copy Title: Geothermal Investigations in Idaho. Part 8. Heat Flow Study of the Snake River Plain Region, Idaho Author: Brott, C.A. Year: 1976 The Snake River Plain of Idaho has recent lava flows and a large number of thermal springs and wells. A heat flow study was initiated which, together with available geological and geophysical information, allows a better definition of the geothermal resource and evaluation of the geothermal potential. Local geothermal anomalies were not the objects of this study and have not been studied in detail. The quality of the heat flow values obtained varies as interpretation was necessary to determine geothermal gradients for many of the holes which had disturbances. A major problem in determining the heat flow values is the lack of knowledge of the in situ porosity of the rocks. The heat flow values obtained for the Eastern Snake River Plain are from shallow wells (< 200 m), hence the heat flow there is low (< 0.5 HFU) because of the water movement in the Snake Plain aquifer. The anomalous regional heat flow pattern around the Snake River Plain, together with other geophysical and geological data, suggest the presence of a major crustal heat source. With the exception of the area of the Snake Plain aquifer, high geothermal gradients were found in all areas of southern Idaho (40 to 100/sup 0/C/km). Temperatures hot enough for space heating can be found most anywhere in the Plain at relatively shallow depths (1 to 2 km). Temperatures hot enough for electrical power generation (200/sup 0/C) can be found beneath southern Idaho almost anywhere at depths of 3 to 4 kilometers. The Plain is fault bounded and hot water circulating along the fault zones from depths can be a very important geothermal resource at shallow depths. The margins of the Plain have the highest heat flow values, are the most faulted, and have possibly the highest geothermal resource potential Title: Geothermal Investigations in Idaho. Part 8. Heat Flow Study of the Snake River Plain Region, Idaho Author: Brott, C.A. Year: 1976 The Snake River Plain of Idaho has recent lava flows and a large number of thermal springs and wells. A heat flow study was initiated which, together with available geological and geophysical information, allows a better definition of the geothermal resource and evaluation of the geothermal potential. Local geothermal anomalies were not the objects of this study and have not been studied in detail. The quality of the heat flow values obtained varies as interpretation was necessary to determine geothermal gradients for many of the holes which had disturbances. A major problem in determining the heat flow values is the lack of knowledge of the in situ porosity of the rocks. The heat flow values obtained for the Eastern Snake River Plain are from shallow wells (< 200 m), hence the heat flow there is low (< 0.5 HFU) because of the water movement in the Snake Plain aquifer. The anomalous regional heat flow pattern around the Snake River Plain, together with other geophysical and geological data, suggest the presence of a major crustal heat source. With the exception of the area of the Snake Plain aquifer, high geothermal gradients were found in all areas of southern Idaho (40 to 100/sup 0/C/km). Temperatures hot enough for space heating can be found most anywhere in the Plain at relatively shallow depths (1 to 2 km). Temperatures hot enough for electrical power generation (200/sup 0/C) can be found beneath southern Idaho almost anywhere at depths of 3 to 4 kilometers. The Plain is fault bounded and hot water circulating along the fault zones from depths can be a very important geothermal resource at shallow depths. The margins of the Plain have the highest heat flow values, are the most faulted, and have possibly the highest geothermal resource potential Close

• 3. [Image] Geological and Geophysical Study of the Origin of the Warm Springs in Bath County, Virginia. Final Report, June 1, 1975--April 30, 1976

  	The results of heat flow determinations and a reconnaissance dipole electrical resistivity survey in Bath County are described. A geologic map was compiled based on published maps and supported by reconnaissance ...
  	Citation × Citation Citation Abstract Copy Title: Geological and Geophysical Study of the Origin of the Warm Springs in Bath County, Virginia. Final Report, June 1, 1975--April 30, 1976 Author: Costain, J.K. Year: 1976 The results of heat flow determinations and a reconnaissance dipole electrical resistivity survey in Bath County are described. A geologic map was compiled based on published maps and supported by reconnaissance geologic mapping in areas where published maps were not available. A regional bipole--dipole electrical resistivity survey was made in order to detect the presence of resistivity lows that might be associated with a geothermal system at depth. A single hole was drilled to a depth of approximately 300 m (approx. 1000 feet) to obtain a heat flow value that is representative of the area. The data were used to attempt to arrive at a model that unambiguously explains the origin of the thermal springs Title: Geological and Geophysical Study of the Origin of the Warm Springs in Bath County, Virginia. Final Report, June 1, 1975--April 30, 1976 Author: Costain, J.K. Year: 1976 The results of heat flow determinations and a reconnaissance dipole electrical resistivity survey in Bath County are described. A geologic map was compiled based on published maps and supported by reconnaissance geologic mapping in areas where published maps were not available. A regional bipole--dipole electrical resistivity survey was made in order to detect the presence of resistivity lows that might be associated with a geothermal system at depth. A single hole was drilled to a depth of approximately 300 m (approx. 1000 feet) to obtain a heat flow value that is representative of the area. The data were used to attempt to arrive at a model that unambiguously explains the origin of the thermal springs Close