Search

Search Results

• 1. [Article] Structure from Motion Elevation Model for Adding Topographic Correction to Ground Penetrating Radar

  High resolution elevation models have become a standard tool in environmental, geological and archaeological investigations, however; the cost of acquiring Lidar in remote areas, on small project sites ...

  Citation × Citation Citation Abstract Copy Title: Structure from Motion Elevation Model for Adding Topographic Correction to Ground Penetrating Radar Author: Mowbray, Leslie A Year: 2015 High resolution elevation models have become a standard tool in environmental, geological and archaeological investigations, however; the cost of acquiring Lidar in remote areas, on small project sites or over repeated time intervals remains prohibitively expensive. Here, open-source software and GIS are used to create a digital elevation model (DEM) from aerial photos in a process known as Structure from Motion (SfM). This process is a fraction of the cost of Lidar acquisition, and is shown to produce a model with comparable resolution. The photos used here were taken from a camera hung from a balloon flown at Mickey Springs in the Alvord Desert, SE Oregon. The model was georeferenced by a combination of handheld GPS and total-station-surveyed ground control points (GCPs). As a proof-of-concept, DEM-derived elevation profiles are compared to total-station-surveyed elevation profiles (independent of the GCPs) and used to apply topographic correction to ground penetrating radar (GPR) transects. The results of this study show that SfM-derived DEMs can be used to topographically correct dense grids of GPR, or be used to add topography to other subsurface investigations such as resistivity or seismic surveys, saving time in the field. Title: Structure from Motion Elevation Model for Adding Topographic Correction to Ground Penetrating Radar Author: Mowbray, Leslie A Year: 2015 High resolution elevation models have become a standard tool in environmental, geological and archaeological investigations, however; the cost of acquiring Lidar in remote areas, on small project sites or over repeated time intervals remains prohibitively expensive. Here, open-source software and GIS are used to create a digital elevation model (DEM) from aerial photos in a process known as Structure from Motion (SfM). This process is a fraction of the cost of Lidar acquisition, and is shown to produce a model with comparable resolution. The photos used here were taken from a camera hung from a balloon flown at Mickey Springs in the Alvord Desert, SE Oregon. The model was georeferenced by a combination of handheld GPS and total-station-surveyed ground control points (GCPs). As a proof-of-concept, DEM-derived elevation profiles are compared to total-station-surveyed elevation profiles (independent of the GCPs) and used to apply topographic correction to ground penetrating radar (GPR) transects. The results of this study show that SfM-derived DEMs can be used to topographically correct dense grids of GPR, or be used to add topography to other subsurface investigations such as resistivity or seismic surveys, saving time in the field. Close

• 2. [Article] Constraining the Holocene Extent of the Northwest Meers Fault, Oklahoma Using High-Resolution Topography and Paleoseismic Trenching

  The Meers Fault (Oklahoma) is one of few seismogenic structures with Holocene surface expression in the stable continental region of North America. Only the ~37 km-long southeastern section of the ~55 ...

  Citation × Citation Citation Abstract Copy Title: Constraining the Holocene Extent of the Northwest Meers Fault, Oklahoma Using High-Resolution Topography and Paleoseismic Trenching Author: Hornsby, Kristofer Tyler Year: 2017 The Meers Fault (Oklahoma) is one of few seismogenic structures with Holocene surface expression in the stable continental region of North America. Only the ~37 km-long southeastern section of the ~55 km long Meers Fault is interpreted to be Holocene-active. The ~17 km-long northwestern section is considered to be Quaternary-active (pre-Holocene); however, its low-relief geomorphic expression and anthropogenic alteration have presented difficulties in evaluating the fault length and style of Holocene deformation. We reevaluate surface expression and earthquake timing of the northwestern portion of the Meers Fault to improve fault characterization, earthquake rupture models, and seismic hazard evaluations based on fault length. We use a combination of airborne lidar (0.5--2 m-resolution), historical aerial photos, and new balloon-based photogrammetric (Structure from Motion) topography (0.25--0.5 m-resolution) collected in this study to analyze and characterize the fault scarp and local fault zone geomorphology. In the northwest, complex surface deformation includes fault splays, a left step, subtle monoclinal warping, and a minor change in fault strike The fault is evident in the landscape as linear escarpments, incised channels on the up-thrown side of the scarp, and closed depressions on the downthrown side. I use topographic profiles, measured perpendicular to the fault scarp to show that the northwest scarp is characterized by decimeter surface offsets. Where the fault traverses the Post Oak Conglomerate the fault zone width rarely exceeds 25 m, in the Hennessey Shale I document an increase in fault zone width with deformation occurring over 20 m to 115 m. I further examined the northwest section of the fault in a paleoseismic excavation where weathered Permian Hennessey Shale and a ~1--2 m-thick veneer of Holocene alluvial deposits have been folded and warped during three surface-folding earthquakes. In an adjacent stream exposure these units are also faulted near the ground surface. Paleoearthquake age modeling (Oxcal) constrained by accelerated mass spectrometry (AMS) dating of detrital charcoal and optically stimulated luminescence (OSL) dating of sandy alluvial beds indicates two earthquakes occurred since ~6152-5550 cal. years BP and one possibly older event along the erosional unconformity along the Hennessey Shale bedrock. This analysis lengthens the Holocene extent of the Meers Fault by ~6 km, to ~43 km, and extends the paleoseismic record of the Meers Fault to ~9598 cal. years BP. These data will improve fault-rupture and earthquake recurrence models used for seismic hazard analysis of the Meers Fault. Title: Constraining the Holocene Extent of the Northwest Meers Fault, Oklahoma Using High-Resolution Topography and Paleoseismic Trenching Author: Hornsby, Kristofer Tyler Year: 2017 The Meers Fault (Oklahoma) is one of few seismogenic structures with Holocene surface expression in the stable continental region of North America. Only the ~37 km-long southeastern section of the ~55 km long Meers Fault is interpreted to be Holocene-active. The ~17 km-long northwestern section is considered to be Quaternary-active (pre-Holocene); however, its low-relief geomorphic expression and anthropogenic alteration have presented difficulties in evaluating the fault length and style of Holocene deformation. We reevaluate surface expression and earthquake timing of the northwestern portion of the Meers Fault to improve fault characterization, earthquake rupture models, and seismic hazard evaluations based on fault length. We use a combination of airborne lidar (0.5--2 m-resolution), historical aerial photos, and new balloon-based photogrammetric (Structure from Motion) topography (0.25--0.5 m-resolution) collected in this study to analyze and characterize the fault scarp and local fault zone geomorphology. In the northwest, complex surface deformation includes fault splays, a left step, subtle monoclinal warping, and a minor change in fault strike The fault is evident in the landscape as linear escarpments, incised channels on the up-thrown side of the scarp, and closed depressions on the downthrown side. I use topographic profiles, measured perpendicular to the fault scarp to show that the northwest scarp is characterized by decimeter surface offsets. Where the fault traverses the Post Oak Conglomerate the fault zone width rarely exceeds 25 m, in the Hennessey Shale I document an increase in fault zone width with deformation occurring over 20 m to 115 m. I further examined the northwest section of the fault in a paleoseismic excavation where weathered Permian Hennessey Shale and a ~1--2 m-thick veneer of Holocene alluvial deposits have been folded and warped during three surface-folding earthquakes. In an adjacent stream exposure these units are also faulted near the ground surface. Paleoearthquake age modeling (Oxcal) constrained by accelerated mass spectrometry (AMS) dating of detrital charcoal and optically stimulated luminescence (OSL) dating of sandy alluvial beds indicates two earthquakes occurred since ~6152-5550 cal. years BP and one possibly older event along the erosional unconformity along the Hennessey Shale bedrock. This analysis lengthens the Holocene extent of the Meers Fault by ~6 km, to ~43 km, and extends the paleoseismic record of the Meers Fault to ~9598 cal. years BP. These data will improve fault-rupture and earthquake recurrence models used for seismic hazard analysis of the Meers Fault. Close

• 3. [Article] Beyond the Angle of Repose: A Review and Synthesis of Landslide Processes in Response to Rapid Uplift, Eel River, Northern Eel River, Northern California

  In mountainous settings, increases in rock uplift are often followed by a commensurate uptick in denudation as rivers incise and steepen hillslopes, making them increasingly prone to landsliding as slope ...

  Citation × Citation Citation Abstract Copy Title: Beyond the Angle of Repose: A Review and Synthesis of Landslide Processes in Response to Rapid Uplift, Eel River, Northern Eel River, Northern California Author: Roering, Joshua J., Mackey, Benjamin H., Handwerger, Alexander L., Booth, Adam M., Schmidt, David A., Bennett, Georgina L., Cerovski-Darriau, Corina Year: 2015 In mountainous settings, increases in rock uplift are often followed by a commensurate uptick in denudation as rivers incise and steepen hillslopes, making them increasingly prone to landsliding as slope angles approach a limiting value. For decades, the threshold slope model has been invoked to account for landslide-driven increases in sediment flux that limit topographic relief, but the manner by which slope failures organize themselves spatially and temporally in order for erosion to keep pace with rock uplift has not been well documented. Here, we review past work and present new findings from remote sensing, cosmogenic adionuclides, suspended sediment records, and airborne lidar data, to decipher patterns of landslide activity and geomorphic processes related to rapid uplift along the northward-migrating Mendocino Triple Junction in Northern California. From historical air photos and airborne lidar, we estimated the velocity and sediment flux associated with active, slow-moving landslides (or earthflows) in the mélange- and argillite-dominated Eel River watershed using the downslope displacement of surface markers such as trees and shrubs. Although active landslides that directly convey sediment into the channel network account for only 7% of the landscape surface, their sediment flux amounts to more than 50% of the suspended load recorded at downstream sediment gauging stations. These active slides tend to exhibit seasonal variations in velocity as satellite-based interferometry has demonstrated that rapid acceleration commences within 1 to 2 months of the onset of autumn rainfall events before slower deceleration ensues in the spring and summer months. Curiously, this seasonal velocity pattern does not appear to vary with landslide size, suggesting that complex hydrologic-mechanical feedbacks (rather than 1-D pore pressure diffusion) may govern slide dynamics. A new analysis of 14 years of discharge and sediment concentration data for the Eel River indicates that the characteristic mid-winter timing of earthflow acceleration corresponds with increased suspended concentration values, suggesting that the seasonal onset of landslide motion each year may be reflected in the export of sediments to the continental margin. The vast majority of active slides exhibit gullied surfaces and the gully networks, which are also seasonally active, may facilitate sediment export although the proportion of material produced by this pathway is poorly known. Along Kekawaka Creek, a prominent tributary to the Eel River, new analyses of catchment-averaged erosion rates derived from cosmogenic radionuclides reveal rapid erosion (0.76 mm/yr) below a prominent knickpoint and slower erosion (0.29 mm/yr) upstream. Such knickpoints are frequently observed in Eel tributaries and are usually comprised of massive (>10m) interlocking resistant boulders that likely persist in the landscape for long time periods (>105yr). Upstream of these knickpoints, active landslides tend to be less frequent and average slope angles are slightly gentler than in downstream areas, which indicates that landslide density and average slope angle appear to increase with erosion rate. Lastly, we synthesize evidence for the role of large, catastrophic landslides in regulating sediment flux and landscape form. The emergence of resistant blocks within the mélange bedrock has promoted large catastrophic slides that have dammed the Eel River and perhaps generated outburst events in the past. The frequency and impact of these landslide dams likely depend on the spatial and size distributions of resistant blocks relative to the width and drainage area of adjacent valley networks. Overall, our findings demonstrate that landslides within the Eel River catchment do not occur randomly, but instead exhibit spatial and temporal patterns related to baselevel lowering, climate forcing, and lithologic variations. Combined with recent landscape evolution models that incorporate landslides, these results provide predictive capability for estimating erosion rates and managing hazards in mountainous regions. Title: Beyond the Angle of Repose: A Review and Synthesis of Landslide Processes in Response to Rapid Uplift, Eel River, Northern Eel River, Northern California Author: Roering, Joshua J., Mackey, Benjamin H., Handwerger, Alexander L., Booth, Adam M., Schmidt, David A., Bennett, Georgina L., Cerovski-Darriau, Corina Year: 2015 In mountainous settings, increases in rock uplift are often followed by a commensurate uptick in denudation as rivers incise and steepen hillslopes, making them increasingly prone to landsliding as slope angles approach a limiting value. For decades, the threshold slope model has been invoked to account for landslide-driven increases in sediment flux that limit topographic relief, but the manner by which slope failures organize themselves spatially and temporally in order for erosion to keep pace with rock uplift has not been well documented. Here, we review past work and present new findings from remote sensing, cosmogenic adionuclides, suspended sediment records, and airborne lidar data, to decipher patterns of landslide activity and geomorphic processes related to rapid uplift along the northward-migrating Mendocino Triple Junction in Northern California. From historical air photos and airborne lidar, we estimated the velocity and sediment flux associated with active, slow-moving landslides (or earthflows) in the mélange- and argillite-dominated Eel River watershed using the downslope displacement of surface markers such as trees and shrubs. Although active landslides that directly convey sediment into the channel network account for only 7% of the landscape surface, their sediment flux amounts to more than 50% of the suspended load recorded at downstream sediment gauging stations. These active slides tend to exhibit seasonal variations in velocity as satellite-based interferometry has demonstrated that rapid acceleration commences within 1 to 2 months of the onset of autumn rainfall events before slower deceleration ensues in the spring and summer months. Curiously, this seasonal velocity pattern does not appear to vary with landslide size, suggesting that complex hydrologic-mechanical feedbacks (rather than 1-D pore pressure diffusion) may govern slide dynamics. A new analysis of 14 years of discharge and sediment concentration data for the Eel River indicates that the characteristic mid-winter timing of earthflow acceleration corresponds with increased suspended concentration values, suggesting that the seasonal onset of landslide motion each year may be reflected in the export of sediments to the continental margin. The vast majority of active slides exhibit gullied surfaces and the gully networks, which are also seasonally active, may facilitate sediment export although the proportion of material produced by this pathway is poorly known. Along Kekawaka Creek, a prominent tributary to the Eel River, new analyses of catchment-averaged erosion rates derived from cosmogenic radionuclides reveal rapid erosion (0.76 mm/yr) below a prominent knickpoint and slower erosion (0.29 mm/yr) upstream. Such knickpoints are frequently observed in Eel tributaries and are usually comprised of massive (>10m) interlocking resistant boulders that likely persist in the landscape for long time periods (>105yr). Upstream of these knickpoints, active landslides tend to be less frequent and average slope angles are slightly gentler than in downstream areas, which indicates that landslide density and average slope angle appear to increase with erosion rate. Lastly, we synthesize evidence for the role of large, catastrophic landslides in regulating sediment flux and landscape form. The emergence of resistant blocks within the mélange bedrock has promoted large catastrophic slides that have dammed the Eel River and perhaps generated outburst events in the past. The frequency and impact of these landslide dams likely depend on the spatial and size distributions of resistant blocks relative to the width and drainage area of adjacent valley networks. Overall, our findings demonstrate that landslides within the Eel River catchment do not occur randomly, but instead exhibit spatial and temporal patterns related to baselevel lowering, climate forcing, and lithologic variations. Combined with recent landscape evolution models that incorporate landslides, these results provide predictive capability for estimating erosion rates and managing hazards in mountainous regions. Close