Search

Search Results

• 1. [Article] Annealing Effect on SB2S3-TiO2 Nanostructures for Solar Cell Applications

  Nanostructures composited of vertical rutile TiO₂ nanorod arrays and Sb₂S₃ nanoparticles were prepared on an F:SnO₂ conductive glass by hydrothermal method and successive ionic layer adsorption and reaction ...

  Citation × Citation Citation Abstract Copy Title: Annealing Effect on SB2S3-TiO2 Nanostructures for Solar Cell Applications Author: Li, Yitan, Wei, Lin, Zhang, Ruizi, Chen, Yanxue, Mei, Liangmo, Jiao, Jun Year: 2013 Nanostructures composited of vertical rutile TiO₂ nanorod arrays and Sb₂S₃ nanoparticles were prepared on an F:SnO₂ conductive glass by hydrothermal method and successive ionic layer adsorption and reaction method at low temperature. Sb₂S₃-sensitized TiO₂ nanorod solar cells were assembled using the SB₂S₃-TiO₂ nanostructure as the photoanode and a polysulfide solution as an electrolyte. Annealing effects on the optical and photovoltaic properties of SB₂S₃-TiO₂ nanostructure were studied systematically. As the annealing temperatures increased, a regular red shift of the bandgap of Sb₂S₃ nanoparticles was observed, where the bandgap decreased from 2.25 to 1.73 eV. At the same time, the photovoltaic conversion efficiency for the nanostructured solar cells increased from 0.46% up to 1.47% as a consequence of the annealing effect. This improvement can be explained by considering the changes in the morphology, the crystalline quality, and the optical properties caused by the annealing treatment. Title: Annealing Effect on SB2S3-TiO2 Nanostructures for Solar Cell Applications Author: Li, Yitan, Wei, Lin, Zhang, Ruizi, Chen, Yanxue, Mei, Liangmo, Jiao, Jun Year: 2013 Nanostructures composited of vertical rutile TiO₂ nanorod arrays and Sb₂S₃ nanoparticles were prepared on an F:SnO₂ conductive glass by hydrothermal method and successive ionic layer adsorption and reaction method at low temperature. Sb₂S₃-sensitized TiO₂ nanorod solar cells were assembled using the SB₂S₃-TiO₂ nanostructure as the photoanode and a polysulfide solution as an electrolyte. Annealing effects on the optical and photovoltaic properties of SB₂S₃-TiO₂ nanostructure were studied systematically. As the annealing temperatures increased, a regular red shift of the bandgap of Sb₂S₃ nanoparticles was observed, where the bandgap decreased from 2.25 to 1.73 eV. At the same time, the photovoltaic conversion efficiency for the nanostructured solar cells increased from 0.46% up to 1.47% as a consequence of the annealing effect. This improvement can be explained by considering the changes in the morphology, the crystalline quality, and the optical properties caused by the annealing treatment. Close

• 2. [Article] Controlled Fabrication of High-Yield CdS Nanostructures by Compartment Arrangement

  High-yield, high-purity CdS nanostructures were synthesized in a turf-like configuration using an improved vapor-liquid-solid method. To increase the yield, a compartment arrangement was employed. The ...

  Citation × Citation Citation Abstract Copy Title: Controlled Fabrication of High-Yield CdS Nanostructures by Compartment Arrangement Author: Green, Joshua M., Lawrance, Juno, Jiao, Jun Year: 2008 High-yield, high-purity CdS nanostructures were synthesized in a turf-like configuration using an improved vapor-liquid-solid method. To increase the yield, a compartment arrangement was employed. The specific kind of nanostructure fabricated was found to be directly dependent on the temperature in the compartment. Along with the high-yield growth of CdS nanorods, nanowires, and nanobelts, intertwined structures were also observed, and the electron field emission property of the intertwined structures was investigated and compared with that of other type of nanostructures. Photoluminescence measurements at 10 K showed a peak emission from the CdS nanostructures at 485 nm. Title: Controlled Fabrication of High-Yield CdS Nanostructures by Compartment Arrangement Author: Green, Joshua M., Lawrance, Juno, Jiao, Jun Year: 2008 High-yield, high-purity CdS nanostructures were synthesized in a turf-like configuration using an improved vapor-liquid-solid method. To increase the yield, a compartment arrangement was employed. The specific kind of nanostructure fabricated was found to be directly dependent on the temperature in the compartment. Along with the high-yield growth of CdS nanorods, nanowires, and nanobelts, intertwined structures were also observed, and the electron field emission property of the intertwined structures was investigated and compared with that of other type of nanostructures. Photoluminescence measurements at 10 K showed a peak emission from the CdS nanostructures at 485 nm. Close

• 3. [Article] Reversible Control of the Magnetization of Fe₃O₄ via Lithium Ions

  In this report, a reversible control of Fe₃O₄ saturated magnetization by Li ions is demonstrated. A miniature Li ion battery (LIB) was assembled using a Fe₃O₄ nanoparticle layer as the active cathode. ...

  Citation × Citation Citation Abstract Copy Title: Reversible Control of the Magnetization of Fe₃O₄ via Lithium Ions Author: Wei, Guodong, Wei, Lin, Wang, Dong, Tian, Yufeng, Chen, Yanxue, Yan, Shishen, Mei, Liangmo, Jiao, Jun Year: 2017 In this report, a reversible control of Fe₃O₄ saturated magnetization by Li ions is demonstrated. A miniature Li ion battery (LIB) was assembled using a Fe₃O₄ nanoparticle layer as the active cathode. A stable magnetism modulation is realized by a nondestructive electrochemical process in which the lithium insertion results in a valence change and partial redistribution of Fe cations in the crystal structure. The relation between the discharge voltage and the chemical phases were studied by ex situ X-ray diffraction and magnetic measurement. In a suitable discharge potential range, a reversible control of Fe₃O₄ saturated magnetization was obtained without structural damage to the magnetic electrode. The experimental results indicate by further optimizing the LIB's performance, a large reversible change in magnetization could be realized at room temperature, suggesting the potential for future practical applications. Title: Reversible Control of the Magnetization of Fe₃O₄ via Lithium Ions Author: Wei, Guodong, Wei, Lin, Wang, Dong, Tian, Yufeng, Chen, Yanxue, Yan, Shishen, Mei, Liangmo, Jiao, Jun Year: 2017 In this report, a reversible control of Fe₃O₄ saturated magnetization by Li ions is demonstrated. A miniature Li ion battery (LIB) was assembled using a Fe₃O₄ nanoparticle layer as the active cathode. A stable magnetism modulation is realized by a nondestructive electrochemical process in which the lithium insertion results in a valence change and partial redistribution of Fe cations in the crystal structure. The relation between the discharge voltage and the chemical phases were studied by ex situ X-ray diffraction and magnetic measurement. In a suitable discharge potential range, a reversible control of Fe₃O₄ saturated magnetization was obtained without structural damage to the magnetic electrode. The experimental results indicate by further optimizing the LIB's performance, a large reversible change in magnetization could be realized at room temperature, suggesting the potential for future practical applications. Close

• 4. [Article] ZnO Nanoneedle/H2O Solid-Liquid Heterojunction-Based Self-Powered Ultraviolet Detector

  ZnO nanoneedle arrays were grown vertically on a fluorine-doped tin oxide-coated glass by hydrothermal method at a relatively low temperature. A self-powered photoelectrochemical cell-type UV detector ...

  Citation × Citation Citation Abstract Copy Title: ZnO Nanoneedle/H2O Solid-Liquid Heterojunction-Based Self-Powered Ultraviolet Detector Author: Li, Qinghao, Wei, Lin, Xie, Yanru, Zhang, Kai, Liu, Lei, Zhu, Dapeng, Jiao, Jun, Chen, Yanxue, Yan, Shishen, Liu, Guolei, Mei, Liangmo Year: 2013 ZnO nanoneedle arrays were grown vertically on a fluorine-doped tin oxide-coated glass by hydrothermal method at a relatively low temperature. A self-powered photoelectrochemical cell-type UV detector was fabricated using the ZnO nanoneedles as the active photoanode and H2O as the electrolyte. This solid-liquid heterojunction offers an enlarged ZnO/water contact area and a direct pathway for electron transport simultaneously. By connecting this UV photodetector to an ammeter, the intensity of UV light can be quantified using the output short-circuit photocurrent without a power source. High photosensitivity, excellent spectral selectivity, and fast photoresponse at zero bias are observed in this UV detector. The self-powered behavior can be well explained by the formation of a space charge layer near the interface of the solid-liquid heterojunction, which results in a built-in potential and makes the solid-liquid heterojunction work in photovoltaic mode. Title: ZnO Nanoneedle/H2O Solid-Liquid Heterojunction-Based Self-Powered Ultraviolet Detector Author: Li, Qinghao, Wei, Lin, Xie, Yanru, Zhang, Kai, Liu, Lei, Zhu, Dapeng, Jiao, Jun, Chen, Yanxue, Yan, Shishen, Liu, Guolei, Mei, Liangmo Year: 2013 ZnO nanoneedle arrays were grown vertically on a fluorine-doped tin oxide-coated glass by hydrothermal method at a relatively low temperature. A self-powered photoelectrochemical cell-type UV detector was fabricated using the ZnO nanoneedles as the active photoanode and H2O as the electrolyte. This solid-liquid heterojunction offers an enlarged ZnO/water contact area and a direct pathway for electron transport simultaneously. By connecting this UV photodetector to an ammeter, the intensity of UV light can be quantified using the output short-circuit photocurrent without a power source. High photosensitivity, excellent spectral selectivity, and fast photoresponse at zero bias are observed in this UV detector. The self-powered behavior can be well explained by the formation of a space charge layer near the interface of the solid-liquid heterojunction, which results in a built-in potential and makes the solid-liquid heterojunction work in photovoltaic mode. Close

• 5. [Article] Self-Assembled Epitaxial BaFe12O19 Nano-Island Film Grown on Al2O3 Substrate by Pulsed Laser Deposition

  M-type hexagonal barium ferrite is one of the most favorable ferrite materials, whose functional properties such as ferroelectric polarity alignment and the interaction between electron spins could be ...

  Citation × Citation Citation Abstract Copy Title: Self-Assembled Epitaxial BaFe12O19 Nano-Island Film Grown on Al2O3 Substrate by Pulsed Laser Deposition Author: Wei, Guodong, Wei, Lin, Chen, Yanxue, Yan, Shishen, Mei, Liangmo, Jiao, Jun Year: 2016 M-type hexagonal barium ferrite is one of the most favorable ferrite materials, whose functional properties such as ferroelectric polarity alignment and the interaction between electron spins could be controlled by manipulating its stoichiometry or microstructure. In this letter, BaFe12O19 films have been prepared on Al2O3 substrate by pulsed laser deposition at different temperature. AFM and SEM results show that under optimal preparation condition, the films change into self-assembled triangular shaped nano-islands with highly regulated orientation. Interesting magnetic and optical properties have been observed in these BaFe12O19 nanostructures. We believe this work may provide a unique opportunity to investigate anomalous phenomenons associated with nanostructured magnetic oxides and the growth dynamics of ferrite films. Title: Self-Assembled Epitaxial BaFe12O19 Nano-Island Film Grown on Al2O3 Substrate by Pulsed Laser Deposition Author: Wei, Guodong, Wei, Lin, Chen, Yanxue, Yan, Shishen, Mei, Liangmo, Jiao, Jun Year: 2016 M-type hexagonal barium ferrite is one of the most favorable ferrite materials, whose functional properties such as ferroelectric polarity alignment and the interaction between electron spins could be controlled by manipulating its stoichiometry or microstructure. In this letter, BaFe12O19 films have been prepared on Al2O3 substrate by pulsed laser deposition at different temperature. AFM and SEM results show that under optimal preparation condition, the films change into self-assembled triangular shaped nano-islands with highly regulated orientation. Interesting magnetic and optical properties have been observed in these BaFe12O19 nanostructures. We believe this work may provide a unique opportunity to investigate anomalous phenomenons associated with nanostructured magnetic oxides and the growth dynamics of ferrite films. Close

• 6. [Article] ZnO Nanosheet Arrays Constructed on Weaved Titanium Wire for CdS-Sensitized Solar Cells

  Ordered ZnO nanosheet arrays were grown on weaved titanium wires by a low-temperature hydrothermal method. CdS nanoparticles were deposited onto the ZnO nanosheet arrays using the successive ionic layer ...

  Citation × Citation Citation Abstract Copy Title: ZnO Nanosheet Arrays Constructed on Weaved Titanium Wire for CdS-Sensitized Solar Cells Author: Wu, Cuncun, Wei, Lin, Li, Yitan, Liu, Chang, Jiao, Jun, Chen, Yanxue, Mei, Liangmo Year: 2014 Ordered ZnO nanosheet arrays were grown on weaved titanium wires by a low-temperature hydrothermal method. CdS nanoparticles were deposited onto the ZnO nanosheet arrays using the successive ionic layer adsorption and reaction method to make a photoanode. Nanoparticle-sensitized solar cells were assembled using these CdS/ZnO nanostructured photoanodes, and their photovoltaic performance was studied systematically. The best light-to-electricity conversion efficiency was obtained to be 2.17% under 100 mW/cm/cm2 illumination, and a remarkable shortcircuit photocurrent density of approximately 20.1 mA/cm2 was recorded, which could attribute to the relatively direct pathways for transportation of electrons provided by ZnO nanosheet arrays as well as the direct contact between ZnO and weaved titanium wires. These results indicate that CdS/ZnO nanostructures on weaved titanium wires would open a novel possibility for applications of low-cost solar cells. Title: ZnO Nanosheet Arrays Constructed on Weaved Titanium Wire for CdS-Sensitized Solar Cells Author: Wu, Cuncun, Wei, Lin, Li, Yitan, Liu, Chang, Jiao, Jun, Chen, Yanxue, Mei, Liangmo Year: 2014 Ordered ZnO nanosheet arrays were grown on weaved titanium wires by a low-temperature hydrothermal method. CdS nanoparticles were deposited onto the ZnO nanosheet arrays using the successive ionic layer adsorption and reaction method to make a photoanode. Nanoparticle-sensitized solar cells were assembled using these CdS/ZnO nanostructured photoanodes, and their photovoltaic performance was studied systematically. The best light-to-electricity conversion efficiency was obtained to be 2.17% under 100 mW/cm/cm2 illumination, and a remarkable shortcircuit photocurrent density of approximately 20.1 mA/cm2 was recorded, which could attribute to the relatively direct pathways for transportation of electrons provided by ZnO nanosheet arrays as well as the direct contact between ZnO and weaved titanium wires. These results indicate that CdS/ZnO nanostructures on weaved titanium wires would open a novel possibility for applications of low-cost solar cells. Close

• 7. [Article] Annealing Effect on Photovoltaic Performance of CdSe Quantum-Dots-Sensitized TiO2 Nanorod Solar Cells

  Large area rutile TiO₂ nanorod arrays were grown on F:SnO₂ (FTO) conductive glass using a hydrothermal method at low temperature. CdSe quantum dots (QDs) were deposited onto single-crystalline TiO₂ nanorod ...

  Citation × Citation Citation Abstract Copy Title: Annealing Effect on Photovoltaic Performance of CdSe Quantum-Dots-Sensitized TiO2 Nanorod Solar Cells Author: Li, Yitan, Wei, Lin, Zhang, Ruizi, Chen, Yanxue, Jiao, Jun Year: 2012 Large area rutile TiO₂ nanorod arrays were grown on F:SnO₂ (FTO) conductive glass using a hydrothermal method at low temperature. CdSe quantum dots (QDs) were deposited onto single-crystalline TiO₂ nanorod arrays by a chemical bath deposition (CBD) method to make a photoelectrode. The solar cell was assembled using a CdSe-TiO₂ nanostructure as the photoanode and polysulfide solution as the electrolyte. The annealing effect on optical and photovoltaic properties of CdSe quantum-dotssensitized TiO₂ nanorod solar cells was studied systematically. A significant change of the morphology and a regular red shift of band gap of CdSe nanoparticles were observed after annealing treatment. At the same time, an improved photovoltaic performance was obtained for quantum-dots-sensitized solar cell using the annealed CdSe-TiO₂ nanostructure electrode. The power conversion efficiency improved from 0.59% to 1.45% as a consequence of the annealing effect. This improvement can be explained by considering the changes in the morphology, the crystalline quality, and the optical properties caused by annealing treatment. Title: Annealing Effect on Photovoltaic Performance of CdSe Quantum-Dots-Sensitized TiO2 Nanorod Solar Cells Author: Li, Yitan, Wei, Lin, Zhang, Ruizi, Chen, Yanxue, Jiao, Jun Year: 2012 Large area rutile TiO₂ nanorod arrays were grown on F:SnO₂ (FTO) conductive glass using a hydrothermal method at low temperature. CdSe quantum dots (QDs) were deposited onto single-crystalline TiO₂ nanorod arrays by a chemical bath deposition (CBD) method to make a photoelectrode. The solar cell was assembled using a CdSe-TiO₂ nanostructure as the photoanode and polysulfide solution as the electrolyte. The annealing effect on optical and photovoltaic properties of CdSe quantum-dotssensitized TiO₂ nanorod solar cells was studied systematically. A significant change of the morphology and a regular red shift of band gap of CdSe nanoparticles were observed after annealing treatment. At the same time, an improved photovoltaic performance was obtained for quantum-dots-sensitized solar cell using the annealed CdSe-TiO₂ nanostructure electrode. The power conversion efficiency improved from 0.59% to 1.45% as a consequence of the annealing effect. This improvement can be explained by considering the changes in the morphology, the crystalline quality, and the optical properties caused by annealing treatment. Close

• 8. [Article] Aqueous Red-Emitting Silicon Nanoparticles for Cellular Imaging: Consequences of Protecting Against Surface Passivation by Hydroxide and Water for Stable Red Emission

  Stable, aqueous, red-to-near infrared emission is critical for the use of silicon nanoparticles (Si NPs) in biological fluorescence assays, but such Si NPs have been difficult to attain. We report a synthesis ...

  Citation × Citation Citation Abstract Copy Title: Aqueous Red-Emitting Silicon Nanoparticles for Cellular Imaging: Consequences of Protecting Against Surface Passivation by Hydroxide and Water for Stable Red Emission Author: Chiu, Sheng-Kuei, Manhat, Beth Ann, DeBenedetti, William J.I., Brown, Anna L., Fichter, Katye, Vu, Tania, Eastman, Micah, Jiao, Jun, Goforth, Andrea Mitchell Year: 2013 Stable, aqueous, red-to-near infrared emission is critical for the use of silicon nanoparticles (Si NPs) in biological fluorescence assays, but such Si NPs have been difficult to attain. We report a synthesis and surface modification strategy that protects Si NPs and preserves red photoluminescence (PL) in water for more than 6 mo. The Si NPs were synthesized via high temperature reaction, liberated from an oxide matrix, and functionalized via hydrosilylation to yield hydrophobic particles. The hydrophobic Si NPs were phase transferred to water using the surfactant cetyltrimethylammonium bromide (CTAB) with retention of red PL. CTAB apparently serves a double role in providing stable, aqueous, red-emitting Si NPs by (i) forming a hydrophobic barrier between the Si NPs and water and (ii) providing aqueous colloidal stability via the polar head group. We demonstrate preservation of the aqueous red emission of these Si NPs in biological media and examine the effects of pH on emission color. Title: Aqueous Red-Emitting Silicon Nanoparticles for Cellular Imaging: Consequences of Protecting Against Surface Passivation by Hydroxide and Water for Stable Red Emission Author: Chiu, Sheng-Kuei, Manhat, Beth Ann, DeBenedetti, William J.I., Brown, Anna L., Fichter, Katye, Vu, Tania, Eastman, Micah, Jiao, Jun, Goforth, Andrea Mitchell Year: 2013 Stable, aqueous, red-to-near infrared emission is critical for the use of silicon nanoparticles (Si NPs) in biological fluorescence assays, but such Si NPs have been difficult to attain. We report a synthesis and surface modification strategy that protects Si NPs and preserves red photoluminescence (PL) in water for more than 6 mo. The Si NPs were synthesized via high temperature reaction, liberated from an oxide matrix, and functionalized via hydrosilylation to yield hydrophobic particles. The hydrophobic Si NPs were phase transferred to water using the surfactant cetyltrimethylammonium bromide (CTAB) with retention of red PL. CTAB apparently serves a double role in providing stable, aqueous, red-emitting Si NPs by (i) forming a hydrophobic barrier between the Si NPs and water and (ii) providing aqueous colloidal stability via the polar head group. We demonstrate preservation of the aqueous red emission of these Si NPs in biological media and examine the effects of pH on emission color. Close

• 9. [Article] CdS Quantum Dot-Sensitized Solar Cells Based on Nano-Branched TiO2 Arrays

  Nano-branched rutile TiO2 nanorod arrays were grown on F:SnO2 conductive glass (FTO) by a facile, two-step wet chemical synthesis process at low temperature. The length of the nanobranches was tailored ...

  Citation × Citation Citation Abstract Copy Title: CdS Quantum Dot-Sensitized Solar Cells Based on Nano-Branched TiO2 Arrays Author: Liu, Chang, Li, Yitan, Wei, Lin, Wu, Cuncun, Chen, Yanxue, Mei, Liangmo, Jiao, Jun Year: 2014 Nano-branched rutile TiO2 nanorod arrays were grown on F:SnO2 conductive glass (FTO) by a facile, two-step wet chemical synthesis process at low temperature. The length of the nanobranches was tailored by controlling the growth time, after which CdS quantum dots were deposited on the nano-branched TiO2 arrays using the successive ionic layer adsorption and reaction method to make a photoanode for quantum dot-sensitized solar cells (QDSCs). The photovoltaic properties of the CdS-sensitized nano-branched TiO2 solar cells were studied systematically. A short-circuit current intensity of approximately 7 mA/cm2 and a light-to-electricity conversion efficiency of 0.95% were recorded for cells based on optimized nano-branched TiO2 arrays, indicating an increase of 138% compared to those based on unbranched TiO2 nanorod arrays. The improved performance is attributed to a markedly enlarged surface area provided by the nanobranches and better electron conductivity in the one-dimensional, well-aligned TiO2 nanorod trunks Title: CdS Quantum Dot-Sensitized Solar Cells Based on Nano-Branched TiO2 Arrays Author: Liu, Chang, Li, Yitan, Wei, Lin, Wu, Cuncun, Chen, Yanxue, Mei, Liangmo, Jiao, Jun Year: 2014 Nano-branched rutile TiO2 nanorod arrays were grown on F:SnO2 conductive glass (FTO) by a facile, two-step wet chemical synthesis process at low temperature. The length of the nanobranches was tailored by controlling the growth time, after which CdS quantum dots were deposited on the nano-branched TiO2 arrays using the successive ionic layer adsorption and reaction method to make a photoanode for quantum dot-sensitized solar cells (QDSCs). The photovoltaic properties of the CdS-sensitized nano-branched TiO2 solar cells were studied systematically. A short-circuit current intensity of approximately 7 mA/cm2 and a light-to-electricity conversion efficiency of 0.95% were recorded for cells based on optimized nano-branched TiO2 arrays, indicating an increase of 138% compared to those based on unbranched TiO2 nanorod arrays. The improved performance is attributed to a markedly enlarged surface area provided by the nanobranches and better electron conductivity in the one-dimensional, well-aligned TiO2 nanorod trunks Close