Search

Search Results

• 1. [Article] Annealing Effect on SB2S3-TiO2 Nanostructures for Solar Cell Applications

  Nanostructures composited of vertical rutile TiO₂ nanorod arrays and Sb₂S₃ nanoparticles were prepared on an F:SnO₂ conductive glass by hydrothermal method and successive ionic layer adsorption and reaction ...

  Citation × Citation Citation Abstract Copy Title: Annealing Effect on SB2S3-TiO2 Nanostructures for Solar Cell Applications Author: Li, Yitan, Wei, Lin, Zhang, Ruizi, Chen, Yanxue, Mei, Liangmo, Jiao, Jun Year: 2013 Nanostructures composited of vertical rutile TiO₂ nanorod arrays and Sb₂S₃ nanoparticles were prepared on an F:SnO₂ conductive glass by hydrothermal method and successive ionic layer adsorption and reaction method at low temperature. Sb₂S₃-sensitized TiO₂ nanorod solar cells were assembled using the SB₂S₃-TiO₂ nanostructure as the photoanode and a polysulfide solution as an electrolyte. Annealing effects on the optical and photovoltaic properties of SB₂S₃-TiO₂ nanostructure were studied systematically. As the annealing temperatures increased, a regular red shift of the bandgap of Sb₂S₃ nanoparticles was observed, where the bandgap decreased from 2.25 to 1.73 eV. At the same time, the photovoltaic conversion efficiency for the nanostructured solar cells increased from 0.46% up to 1.47% as a consequence of the annealing effect. This improvement can be explained by considering the changes in the morphology, the crystalline quality, and the optical properties caused by the annealing treatment. Title: Annealing Effect on SB2S3-TiO2 Nanostructures for Solar Cell Applications Author: Li, Yitan, Wei, Lin, Zhang, Ruizi, Chen, Yanxue, Mei, Liangmo, Jiao, Jun Year: 2013 Nanostructures composited of vertical rutile TiO₂ nanorod arrays and Sb₂S₃ nanoparticles were prepared on an F:SnO₂ conductive glass by hydrothermal method and successive ionic layer adsorption and reaction method at low temperature. Sb₂S₃-sensitized TiO₂ nanorod solar cells were assembled using the SB₂S₃-TiO₂ nanostructure as the photoanode and a polysulfide solution as an electrolyte. Annealing effects on the optical and photovoltaic properties of SB₂S₃-TiO₂ nanostructure were studied systematically. As the annealing temperatures increased, a regular red shift of the bandgap of Sb₂S₃ nanoparticles was observed, where the bandgap decreased from 2.25 to 1.73 eV. At the same time, the photovoltaic conversion efficiency for the nanostructured solar cells increased from 0.46% up to 1.47% as a consequence of the annealing effect. This improvement can be explained by considering the changes in the morphology, the crystalline quality, and the optical properties caused by the annealing treatment. Close

• 2. [Article] ZnO Nanoneedle/H2O Solid-Liquid Heterojunction-Based Self-Powered Ultraviolet Detector

  ZnO nanoneedle arrays were grown vertically on a fluorine-doped tin oxide-coated glass by hydrothermal method at a relatively low temperature. A self-powered photoelectrochemical cell-type UV detector ...

  Citation × Citation Citation Abstract Copy Title: ZnO Nanoneedle/H2O Solid-Liquid Heterojunction-Based Self-Powered Ultraviolet Detector Author: Li, Qinghao, Wei, Lin, Xie, Yanru, Zhang, Kai, Liu, Lei, Zhu, Dapeng, Jiao, Jun, Chen, Yanxue, Yan, Shishen, Liu, Guolei, Mei, Liangmo Year: 2013 ZnO nanoneedle arrays were grown vertically on a fluorine-doped tin oxide-coated glass by hydrothermal method at a relatively low temperature. A self-powered photoelectrochemical cell-type UV detector was fabricated using the ZnO nanoneedles as the active photoanode and H2O as the electrolyte. This solid-liquid heterojunction offers an enlarged ZnO/water contact area and a direct pathway for electron transport simultaneously. By connecting this UV photodetector to an ammeter, the intensity of UV light can be quantified using the output short-circuit photocurrent without a power source. High photosensitivity, excellent spectral selectivity, and fast photoresponse at zero bias are observed in this UV detector. The self-powered behavior can be well explained by the formation of a space charge layer near the interface of the solid-liquid heterojunction, which results in a built-in potential and makes the solid-liquid heterojunction work in photovoltaic mode. Title: ZnO Nanoneedle/H2O Solid-Liquid Heterojunction-Based Self-Powered Ultraviolet Detector Author: Li, Qinghao, Wei, Lin, Xie, Yanru, Zhang, Kai, Liu, Lei, Zhu, Dapeng, Jiao, Jun, Chen, Yanxue, Yan, Shishen, Liu, Guolei, Mei, Liangmo Year: 2013 ZnO nanoneedle arrays were grown vertically on a fluorine-doped tin oxide-coated glass by hydrothermal method at a relatively low temperature. A self-powered photoelectrochemical cell-type UV detector was fabricated using the ZnO nanoneedles as the active photoanode and H2O as the electrolyte. This solid-liquid heterojunction offers an enlarged ZnO/water contact area and a direct pathway for electron transport simultaneously. By connecting this UV photodetector to an ammeter, the intensity of UV light can be quantified using the output short-circuit photocurrent without a power source. High photosensitivity, excellent spectral selectivity, and fast photoresponse at zero bias are observed in this UV detector. The self-powered behavior can be well explained by the formation of a space charge layer near the interface of the solid-liquid heterojunction, which results in a built-in potential and makes the solid-liquid heterojunction work in photovoltaic mode. Close

• 3. [Article] Annealing Effect on Photovoltaic Performance of CdSe Quantum-Dots-Sensitized TiO2 Nanorod Solar Cells

  Large area rutile TiO₂ nanorod arrays were grown on F:SnO₂ (FTO) conductive glass using a hydrothermal method at low temperature. CdSe quantum dots (QDs) were deposited onto single-crystalline TiO₂ nanorod ...

  Citation × Citation Citation Abstract Copy Title: Annealing Effect on Photovoltaic Performance of CdSe Quantum-Dots-Sensitized TiO2 Nanorod Solar Cells Author: Li, Yitan, Wei, Lin, Zhang, Ruizi, Chen, Yanxue, Jiao, Jun Year: 2012 Large area rutile TiO₂ nanorod arrays were grown on F:SnO₂ (FTO) conductive glass using a hydrothermal method at low temperature. CdSe quantum dots (QDs) were deposited onto single-crystalline TiO₂ nanorod arrays by a chemical bath deposition (CBD) method to make a photoelectrode. The solar cell was assembled using a CdSe-TiO₂ nanostructure as the photoanode and polysulfide solution as the electrolyte. The annealing effect on optical and photovoltaic properties of CdSe quantum-dotssensitized TiO₂ nanorod solar cells was studied systematically. A significant change of the morphology and a regular red shift of band gap of CdSe nanoparticles were observed after annealing treatment. At the same time, an improved photovoltaic performance was obtained for quantum-dots-sensitized solar cell using the annealed CdSe-TiO₂ nanostructure electrode. The power conversion efficiency improved from 0.59% to 1.45% as a consequence of the annealing effect. This improvement can be explained by considering the changes in the morphology, the crystalline quality, and the optical properties caused by annealing treatment. Title: Annealing Effect on Photovoltaic Performance of CdSe Quantum-Dots-Sensitized TiO2 Nanorod Solar Cells Author: Li, Yitan, Wei, Lin, Zhang, Ruizi, Chen, Yanxue, Jiao, Jun Year: 2012 Large area rutile TiO₂ nanorod arrays were grown on F:SnO₂ (FTO) conductive glass using a hydrothermal method at low temperature. CdSe quantum dots (QDs) were deposited onto single-crystalline TiO₂ nanorod arrays by a chemical bath deposition (CBD) method to make a photoelectrode. The solar cell was assembled using a CdSe-TiO₂ nanostructure as the photoanode and polysulfide solution as the electrolyte. The annealing effect on optical and photovoltaic properties of CdSe quantum-dotssensitized TiO₂ nanorod solar cells was studied systematically. A significant change of the morphology and a regular red shift of band gap of CdSe nanoparticles were observed after annealing treatment. At the same time, an improved photovoltaic performance was obtained for quantum-dots-sensitized solar cell using the annealed CdSe-TiO₂ nanostructure electrode. The power conversion efficiency improved from 0.59% to 1.45% as a consequence of the annealing effect. This improvement can be explained by considering the changes in the morphology, the crystalline quality, and the optical properties caused by annealing treatment. Close